Bilevel positive airway pressure ventilation in patients susceptible to hypoxemia during procedural sedation for colonoscopy: a prospective randomized controlled study.

BACKGROUND AND AIMS: Hypoxemia is one of the most common adverse events during colonoscopy, particularly among patients who are diagnosed with obstructive sleep apnea (OSA) or are overweight. Consequently, the objective of this study was to evaluate the effectiveness of bilevel positive airway pressure (BPAP) ventilation for patients with high-risk hypoxemia during colonoscopy with sedation. METHODS: In this trial, 127 patients who met the eligibility criteria were randomly assigned to the BPAP oxygen group and nasal cannula (NC) group. The primary endpoint was the incidence of hypoxemia. RESULTS: Compared with the use of NC, BPAP ventilation exhibited a significant reduction in the incidence of hypoxemia, decreasing it from 23.8% to 6.3% (absolute risk difference, 17.5%; 95% confidence interval, 5.4-29.6; P = .006). Importantly, BPAP ventilation prevented the occurrence of severe hypoxemia (9.5% vs 0%; absolute risk difference, 9.5%; 95% confidence interval, 2.3-16.7; P = .035). In addition, the BPAP group required fewer airway interventions (P < .05). CONCLUSIONS: In individuals with OSA or overweight status, the use of BPAP ventilation during colonoscopy significantly reduced the incidence of hypoxemia. (Clinical trial registration number: ChiCTR2300073193.).

Metformin attenuates chronic lung allograft dysfunction: evidence in rat models.

BACKGROUND: Chronic lung allograft dysfunction (CLAD) directly causes an abysmal long-term prognosis after lung transplantation (LTx), but effective and safe drugs are not available. Metformin exhibits high therapeutic potential due to its antifibrotic and immunomodulatory effects; however, it is unclear whether metformin exerts a therapeutic effect in CLAD. We sought to investigate the effect of metformin on CLAD based on rat models. METHODS: Allogeneic LTx rats were treated with Cyclosporin A (CsA) in the first week, followed by metformin, CsA, or vehicle treatment. Syngeneic LTx rats received only vehicles. All rats were sacrificed on post-transplant week 4. Pathology of lung graft, spleen, and thymus, extent of lung fibrosis, activity of profibrotic cytokines and signaling pathway, adaptive immunity, and AMPK activity were then studied. RESULTS: Allogeneic recipients without maintenance CsA treatment manifested CLAD pathological characteristics, but these changes were not observed in rats treated with metformin. For the antifibrotic effect, metformin suppressed the fibrosis extent and profibrotic cytokine expression in lung grafts. Regarding immunomodulatory effect, metformin reduced T- and B-cell infiltration in lung grafts, spleen and thymus weights, the T- and B-cell zone areas in the spleen, and the thymic medullary area. In addition, metformin activated AMPK in lung allografts and in α-SMA+ cells and T cells in the lung grafts. CONCLUSIONS: Metformin attenuates CLAD in rat models, which could be attributed to the antifibrotic and immunomodulatory effects. AMPK activation suggests the potential molecular mechanism. Our study provides an experimental rationale for further clinical trials.

Neglected Drivers of Antibiotic Resistance: Survival of Extended-Spectrum ß-Lactamase-Producing Pathogenic Escherichia coli from Livestock Waste through Dormancy and Release of Transformable Extracellular Antibiotic Resistance Genes under Heat Treatment.

Extended-spectrum ß-lactamase (ESBL)-producing Enterobacteriaceae has caused a global pandemic with high prevalence in livestock and poultry, which could disseminate into the environment and humans. To curb this risk, heat-based harmless treatment of livestock waste was carried out. However, some risks of the bacterial persistence have not been thoroughly assessed. This study demonstrated that antibiotic-resistant bacteria (ARB) could survive at 55 °C through dormancy, and simultaneously transformable extracellular antibiotic resistance genes (eARGs) would be released. The ESBL-producing pathogenic Escherichia coli CM1 from chicken manure could enter a dormant state at 55 °C and reactivate at 37 °C. Dormant CM1 had stronger ß-lactam resistance, which was associated with high expression of ß-lactamase genes and low expression of outer membrane porin genes. Resuscitated CM1 maintained its virulence expression and multidrug resistance and even had stronger cephalosporin resistance, which might be due to the ultra-low expression of the porin genes. Besides, heat at 55 °C promoted the release of eARGs, some of which possessed a certain nuclease stability and heat persistence, and even maintained their transformability to an Acinetobacter baylyi strain. Therefore, dormant multidrug-resistant pathogens from livestock waste will still pose a direct health risk to humans, while the resuscitation of dormant ARB and the transformation of released eARGs will jointly promote the proliferation of ARGs and the spread of antibiotic resistance.

Coincidently oral lesions in Crohn's disease.

A 21-year-old patient with Crohn's disease, who was undergoing Infliximab treatment, presented at the hospital due to a painful oral mass. After confirming the absence of malignant cells through frozen sections, a complete excision of the infiltrated bone surrounding the lesion was performed. The postoperative pathology confirmed the presence of Central type giant cell granuloma in the mandible, which is distinct from non-caseating granulomas in oral CD and Infliximab-induced Sarcoidosis. As far as we are aware, this is the first to report an association between CGCG and both CD and anti-tumor necrosis factor therapy treatment.

Achieving sub-nanometer roughness on aspheric optical mold by non-contact polishing using damping-clothed tool.

The surface quality of optical lenses is highly required in imaging functions. Normally, ultra-precision turning is employed to fabricate the optical lenses. However, ultra-precision turning cannot meet the surface quality demands due to the tool marks. In this study, a new damping-clothed (DC) tool and chemical enhanced non-Newtonian ultrafine (CNNU) slurry for non-contact polishing are proposed to achieve sub-nanometer roughness on aspherical optical molds. A material removal model based on the hydrodynamic pressure and velocity simulation was established to calculate the dwell time in curved surface machining. The formation mechanism of sub-nanometer roughness is clarified. The proposed method and slurry were verified by the experiments in processing NiP alloy aspheric optical mold. After the process, surface roughness Sa achieved 0.54 nm and the form accuracy is less than PV 600 nm.

Edge roll-off suppression method in double-sided lapping with fixed abrasives.

Edge roll-off affects the performance of key parts in precision optics processing. Currently, the evolution mechanism of edge roll-off is not understood clearly, and the existing suppression methods for edge roll-off are not qualified in real applications. To address the problem, this paper presents a new edge roll-off suppression method in double-sided lapping with fixed abrasives. The evolution mechanism of edge roll-off in double-sided lapping is analyzed by utilizing the finite element method (FEM). Three key influential factors affecting edge roll-off, including filling materials and the width of the sacrificial and filling loops, are optimized by FEM analysis and verified by experiments. By applying the optimized parameters, the depth and width of the edge roll-off on thin copper substrates are reduced by about 80% and 55%, respectively.

Depth of Invasion into the Circular and Longitudinal Muscle Layers in T2 Esophageal Squamous Cell Carcinoma Does Not Affect Prognosis or Lymph Node Metastasis: A Multicenter Retrospective Study.

BACKGROUND: Although a greater depth of tumor invasion is correlated with a poorer prognosis in esophageal squamous cell carcinoma (ESCC), it remains controversial whether T2 ESCC should be subclassified by circular and longitudinal muscle invasion. We conducted a multicenter retrospective study to evaluate the relationship between the depth of invasion and long-term outcome and to identify the clinical significance of subclassifying T2 ESCC. METHODS: Patients with T2 ESCC who underwent esophagectomy at two different institutes between January 2009 and December 2017 were analyzed retrospectively. ESCC with circular and longitudinal muscle invasion was defined as T2 circular and T2 longitudinal ESCC, respectively. Survival outcomes and risk factors for lymph node metastasis (LNM) were evaluated by univariate and multivariate analyses. In addition, data from stage T1b ESCC cases during the same period were retrieved for use as a comparison cohort to evaluate the prognostic significance of the T2 substage. RESULTS: A total of 536 T2 ESCC patients were eligible, and 192 (36%) patients developed LNM. No significant difference was found in general characteristics between the T2 circular and T2 longitudinal ESCC groups (n = 219 and n = 317, P > 0.05), except for tumor location (P = 0.02). The T2 substage was not significantly correlated with survival on univariate or multivariate analysis (P = 0.30 and P = 0.34, respectively). Multivariate analysis also indicated that the T2 substage was not an independent risk factor for LNM (P = 0.15). When patients with stage T1b ESCC were considered, their survival time was significantly different from that of patients with T2 circular and T2 longitudinal disease (P = 0.01). CONCLUSIONS: The depth of tumor invasion into the circular and longitudinal muscle layers in T2 ESCC does not affect the prognosis or risk of LNM.

Modeling and Simulating of High Chromium Alloy Based on Molecular Dynamics.

High chromium alloy is a kind of metal material with high corrosion resistance and high hardness. It is used in the thrust bearing bush of nuclear main pump in a severe environment. Based on the content of elements in high chromium alloy and the manufacturing preparation process of the alloy, a method for constructing the molecular dynamics (MD) model was proposed to study the machinability of the alloy. The MD simulation model of high chromium alloy was established based on alloy structure with the atomic random permutation and two bubble algorithms. Then, according to the actual manufacturing process of the high chromium alloy, a quenching process was introduced to simulate the actual manufacturing process of the high chromium alloy, so the property of the high chromium alloy model was improved and it was more suitable for precision machining. The accuracy of the model was verified by the internal structure and by calculating the nanohardness and density of the high chromium alloy model after adequate relaxation to studying the nanomachining performance. The coordination number of the high chromium alloy is about 4.3 calculated by integrating the radial distribution function. And there is not a perfect crystal structure in the alloy model. The density of the alloy model is about 7.549 g/cm2, which agreed with the results of actual experimental measurement. A series of MD simulations were performed to investigate the nanomechanical property of the high chromium alloy by using the MD model. The maximum depth of 2 nm, 2.5 nm and 3 nm indentation simulations were carried out with 3 nm indenter. The results showed that the nanohardness is about 6.951 GPa-8.095 GPa, these properties are very close to the real measured results. The material and the deformation property of the high chromium alloy were stable during the indentation process.

Classification of the superior angle of the scapula and its correlation with the suprascapular notch: a study on 303 scapulas.

PURPOSE: The aims of this study had been to classify the superior angle of the scapula based on morphological features, and to investigate its correlation with the suprascapular notch. METHODS: 303 samples of Chinese dried scapular specimens were collected from the Department of anatomy, Southwest Medical University. According to the anatomical morphological characteristics of the superior angle of the scapula, the morphological classification was performed to explore its correlation with the suprascapular notch (SSN). RESULTS: The superior angle of the scapula was classified into three types (Hilly shape, Mountain Peak shape and Chimney shape). There were 143 cases of Hilly shape (47.20%), 144 cases of Mountain shape (47.52%), and 16 cases of Chimney shape (5.28%). The angle of Hilly shape (93.36° ± 7.76°) was significantly larger than the Mountain Peak shape (86.60° ± 6.61°) and the Chimney shape (86.22° ± 7.20°), and the difference was statistically significant (P < 0.05). The type I-III of Rengachary's classification to SSN was low risk of suprascapular nerve entrapment, while the type IV-VI was high risk of suprascapular nerve entrapment. Compared with the Mountain Peak shape and the Chimney shape, the Hilly shape corresponds to more types I-III of suprascapular notch but to fewer types IV-VI (P < 0.05). CONCLUSIONS: The superior angle of the scapula was divided into three types: Hilly shape (47.20%), Mountain Peak shape (47.52%) and Chimney shape (5.28%). The Mountain Peak shape might be more likely to result in inability of the levator muscle with acute or chronic overload mechanisms, and the risk of suprascapular nerve entrapment in Mountain peak shape was higher than that of Hilly shape. And, it might have a potential effect on neck pain.

PDGF-induced migration of synthetic vascular smooth muscle cells through c-Src-activated L-type Ca2+ channels with full-length CaV1.2 C-terminus.

In atherosclerosis, vascular smooth muscle cells (VSMC) migrate from the media toward the intima of the arteries in response to cytokines, such as platelet-derived growth factor (PDGF). However, molecular mechanism underlying the PDGF-induced migration of VSMCs remains unclear. The migration of rat aorta-derived synthetic VSMCs, A7r5, in response to PDGF was potently inhibited by a CaV1.2 channel inhibitor, nifedipine, and a Src family tyrosine kinase (SFK)/Abl inhibitor, bosutinib, in a less-than-additive manner. PDGF significantly increased CaV1.2 channel currents without altering CaV1.2 protein expression levels in A7r5 cells. This reaction was inhibited by C-terminal Src kinase, a selective inhibitor of SFKs. In contractile VSMCs, the C-terminus of CaV1.2 is proteolytically cleaved into proximal and distal C-termini (PCT and DCT, respectively). Clipped DCT is noncovalently reassociated with PCT to autoinhibit the channel activity. Conversely, in synthetic A7r5 cells, full-length CaV1.2 (CaV1.2FL) is expressed much more abundantly than truncated CaV1.2. In a heterologous expression system, c-Src activated CaV1.2 channels composed of CaV1.2FL but not truncated CaV1.2 (CaV1.2Δ1763) or CaV1.2Δ1763 plus clipped DCT. Further, c-Src enhanced the coupling efficiency between the voltage-sensing domain and activation gate of CaV1.2FL channels by phosphorylating Tyr1709 and Tyr1758 in PCT. Compared with CaV1.2Δ1763, c-Src could more efficiently bind to and phosphorylate CaV1.2FL irrespective of the presence or absence of clipped DCT. Therefore, in atherosclerotic lesions, phenotypic switching of VSMCs may facilitate pro-migratory effects of PDGF on VSMCs by suppressing posttranslational CaV1.2 modifications.

Effects of Unilateral Electroacupuncture on Bilateral Proprioception in a Unilateral Anterior Cruciate Ligament Injury Model.

BACKGROUND Anterior cruciate ligament (ACL) injury can cause knee proprioception degeneration, on which the electroacupuncture (EA) treatment has a definite effect. However, it is still not clear whether conducting EA intervention on the injured side can promote bilateral proprioception recovery. MATERIAL AND METHODS We randomly selected 6 of 9 normal cynomolgus monkeys to develop unilateral ACL injury models via arthroscopy. All knees were divided into 5 groups: the normal control (NC) group, injured side of blank model (ISBM) group, contralateral side of blank model (CSBM) group, injured side of EA (ISE) group, and contralateral side of EA (CSE) group. Ten days after modeling, the monkeys in the EA group were treated with EA daily for 6 weeks at the acupoints. At 6 weeks, the 5 groups were examined by electrophysiology (SEPs and MCV). The ACL was separated to conduct the gold chloride staining for morphology observation and count the number of total and variant proprioceptors. RESULTS At 6 weeks, the latent period of the SEPs and MCV and the number of variant proprioceptors in the blank model group and the EA group were increased compared with the NC group, while the amplitude and the number of total proprioceptors were decreased. The changes in the ISBM and CSBM group were more remarkable than in the ISE and CSE group. All differences were statistically significant (P<0.05). CONCLUSIONS Unilateral ACL injury leads to bilateral proprioception degeneration, and the unilateral knee EA intervention can aid bilateral proprioception recovery.

A Macaca Fascicularis Knee Osteoarthritis Model Developed by Modified Hulth Combined with Joint Scratches.

BACKGROUND Osteoarthritis is a common degenerative disease of joints, and animal models have important significance in the investigation of this disease. The aim of this study was to develop a better method for developing osteoarthritis models in primates by comparing the modified Hulth score combined with joint scratches modeling method with others. MATERIAL AND METHODS We randomly divided 15 young male Macaca fascicularis and 3 old male Macaca fascicularis into 6 groups (n=3). Knee osteoarthritis (KOA) models were developed with different methods: modified Hulth combined with joint scratches (Group A), modified Hulth (Group B), Hulth (Group C), spontaneous models (Group D); sham-operated (Group E), and blank control (Group F). Morphology and pathology of knee joints were observed at the 8th week after surgery. The levels of WBC, IL-1b, and TGF-b1 in synovial fluid were detected by ELISA. The levels of COL-II, ACAN, and MMP-13 in articular cartilage were examined by RT-qPCR and Western blot. RESULTS In Brittberg and modified Mankin score, Group A was higher than B (P<0.05) and lower than C (P<0.05), and there was no statistically significant difference between Group A and D (P>0.05). Except for Group E and F, the differences were statistically significant among others in WBC, IL-1ß, and TGF-ß1 (P<0.05). COL-II and ACAN decreased and MMP-13 increased, and there was no significant difference between Groups A and D (P>0.05) or between Groups E and F (P>0.05). There were statistically significant differences among other groups (P<0.05). CONCLUSIONS The models developed by modified Hulth combined with joint scratches were the closet to spontaneous models at the 8th week after surgery.

Three-Dimensional (3D) Computed Tomographic (CT) Assessment of the Sustentaculum Tail to Find Distinctive Characteristics: Implications for Surgery.

BACKGROUND With the complexity of calcaneal fracture (CF) increasing, its treatment has changed to include inserting the screw used to secure the facies articular posterior into the sustentaculum tail (ST). Some research progress has been made in this area, but there has been little in-depth research on the anatomical morphology of the sustentaculum tail, which is necessary for clinical surgery, and more information about Chinese anatomic characteristics and improved surgical techniques for CF are needed. MATERIAL AND METHODS This anatomical study, based on a three-dimensional (3D) computed tomographic (CT) reconstruction technique, included 287 dry calcaneus, consisting of 144 left and 143 right calcaneus. The images were reconstructed in 3D after CT scanning. Seven subjects were enrolled (L and R): (1) The vertical distance from inside the sustentaculum tail (IST) to inside the facies articularis talaris posterior; (2) The vertical distance from IST to the outside facies articularis talaris posterior; (3) The thickness of sulcus calcaneal nadir; (4) The distance from IST to processus medislis tuberis calcaneus; (5) The distance from IST to calcaneal posterosuperior tuber; (6) The angle of the prolate axial intersection between ST and calcaneus on the normal superior as ˂α; and (7) The angle of the prolate axial intersection between ST and calcaneus on the normal posterior as ˂ß. All measurement results were analyzed by SPSS 22.0. RESULTS Based on morphological classification, the average length of AB, AC, AE, and AF on left ST were 16.956±1.391 mm, 37.803±2.525 mm, 43.244±3.617 mm, and 51.113±4.455 mm, respectively. Among the others, Ë‚ß was 81.227±6.317 mm on the left and 74.581±9.008 mm on the right (P<0.05). CONCLUSIONS These results suggest better ways to treat the special characteristics and to reduce the risk of CF surgery.

Evaluation of acute toxicity potential of water hyacinth leaves.

Although higher protein yield per hectare of water hyacinth than that of soy, high protein content of its leaves and good essential amino acid pattern have been proven, its dietary toxicity for human or animal consumption has not yet been evaluated. Therefore, the acute toxicity of water hyacinth leaves has been evaluated by an animal feeding test. The concentrations of common toxic metals including cadmium, lead, platinum, palladium, tin, mercury, barium, silver, stibium and aluminum in the water hyacinth leaf powder (WHLP) used for the animal feeding test were within their maximum limits in food additives as reported by the World Health Organization. The median lethal dose (LD50) of WHLP was more than 16 g kg(-1) body weight. In the study, after feeding for 7 and 28 days, the body weight of all the mice increased. The results of hematological analysis, clinical biochemical analysis, histopathological evaluation, general dissection or investigations of internal organs, appearance and behavior observations did not indicate any adverse effects from the diet containing WHLP. It is therefore concluded that water hyacinth leaves are not acutely toxic.

Robust autofocus method based on patterned active illumination and image cross-correlation analysis.

For the effectiveness of a computer-aided diagnosis system, the quality of whole-slide image (WSI) is the foundation, and a useful autofocus method is an important part of ensuring the quality of WSI. The existing autofocus methods need to balance focusing speed and focusing accuracy, and need to be optimized separately for different samples or scenes. In this paper, a robust autofocus method based on fiber bundle illumination and image normalization analysis is proposed. For various application scenes, it meets the requirements of autofocusing through active illumination, such as bright field imaging and fluorescence imaging. For different structures on samples, it ensures the autofocusing accuracy through image analysis. The experimental results imply that the autofocusing method in this paper can effectively track the change of the distance from the sample to the focal plane and significantly improve the WSI quality.

Subnanoscale Ion Beam Modification-Assisted Smoothing of Heterostructure Surfaces.

Glass ceramic (GC) is the most promising material for objective lenses for extreme ultraviolet lithography that must meet the subnanometer precision, which is characterized by low values of high spatial frequency surface roughness (HSFR). However, the HSFR of GC is typically degraded during ion beam figuring (IBF). Herein, a developed method for constructing molecular dynamics (MD) models of GC was presented, and the formation mechanisms of surface morphologies were investigated. The results indicated that the generation of the dot-like microstructure was the result of the difference in the erosion rate caused by the difference in the intrinsic properties between ceramic phases (CPs) and glass phases (GPs). Further, the difference in the microstructure of the IBF surface under different beam angles was mainly caused by the difference in the two types of sputtering. Quantum mechanical calculations showed that the presence of interstitial atoms would result in electron rearrangement and that the electron localization can lead to a reduction in CP stability. To obtain a homogeneous surface, the effects of beam parameters on the heterogeneous surface were systematically investigated based on the proposed MD model. Then, a novel ion beam modification (IBM) method was proposed and demonstrated by TEM and GIXRD. The range of ion beam smoothing parameters that could effectively converge the HSFR of the modified surface was determined through numerous experiments. Using the optimized beam parameters, an ultrathin homogeneous modified surface within 3 nm was obtained. The HSFR of GC smoothed by ion beam modification-assisted smoothing (IBMS) dropped from 0.348 to 0.090 nm, a 74% reduction. These research results offer a deeper understanding of the morphology formation mechanisms of the GC surfaces involved in ion beam processing and may point to a new approach for achieving ultrasmooth heterostructure surfaces down to the subnanometer scale.

Causal association between genetically predicted circulating immune cell counts and frailty: a two-sample Mendelian randomization study.

Background: Despite the recognized link between immune responses and frailty, the association between immune cell counts and frailty based on previous observational studies remains disputed, with uncertain causal nexus. This study aimed to elucidate causal association between genetically predicted circulating immune cell counts and frailty. Methods: We conducted the two-sample Mendelian randomization (MR) study with independent genetic variants associated with six immune cell subtype counts from genome-wide association studies in 563,946 European individuals. Frailty summary data, assessed via frailty index (FI), was obtained from study comprising 175,226 subjects. Univariate MR, reverse MR and multivariate MR were conducted to comprehensive investigate the association between immune cell counts and FI, with two-step MR analysis for mediation analysis. Results: Univariate MR evidence indicated that among six leukocyte subtype counts, only elevated eosinophil count was significantly correlated with higher FI (ß = 0.059, 95% confidence interval [CI], 0.042-0.078, P=5.63E-11), with no reverse causal relationship identified in reverse MR. In multivariate MR, the causal effect of eosinophil count retained statistical significance (ß = 0.063, 95% CI, 0.021-0.104, P = 0.003). Ultimately, the two-step MR analysis demonstrated two mediators in this causal pathway: asthma (ß= 0.019, 95% CI, 0.013-0.025, P = 35.84E-10, mediated proportion, 31.732%) and rheumatoid arthritis (ß= 0.004, 95% CI, 0.001-0.006, P=1.75E-03, mediated proportion, 6.411%). Conclusions: Within immune cell subtypes, MR evidence indicated only genetically predicted circulating eosinophil count had irreversible and independent causal effect on frailty, with asthma and rheumatoid arthritis possibly serving as partial mediators. The finding stressed the need for further exploring physiological functions of eosinophils in order to develop effective strategies against frailty.

Prognostic factors for patients with pathologic T1-T2N+ esophageal squamous cell carcinoma: A retrospective study with external validation.

BACKGROUND: Lymph node metastasis is significantly associated with a worse prognosis in patients with localized early-stage esophageal squamous cell carcinoma. This study aimed to explore the prognostic factors and develop a nomogram for predicting survival in patients with pathologic T1-2N+ esophageal squamous cell carcinoma. METHODS: Between 2014 and 2022, patients with pT1-2N+ esophageal squamous cell carcinoma who underwent esophagectomy with lymphadenectomy at 2 institutes were reviewed and assigned to training and external validation cohorts. Independent prognostic factors were identified via univariate and multivariate Cox regression analyses. The nomogram model was developed and evaluated by the area under the receiver operating characteristic curve and calibration curve. RESULTS: In total, 268 patients with a median age of 65 years (range, 40-82) were included and assigned to training (n = 190) and external validation (n = 78) cohorts. The Cox proportional hazards model demonstrated that body mass index (P = .031), surgical approach (P < .001), T stage (P = .015), and Clavien-Dindo classification (P < .001) were independent prognostic factors in the training cohort. The nomogram showed good discrimination, with an area under the receiver operating characteristic curve for 1-year, 3-year, and 5-year of 0.810, 0.789, and 0.809 in the training cohort and 0.782, 0.679, and 0.698 in the validation cohort. The calibration curve showed that the predicted survival probability was in good agreement with the actual survival probability. CONCLUSION: Lower body mass index, left surgical approach, T2 stage, and Clavien-Dindo classification grade III to V were related to worse prognosis in patients with pT1-T2N+ esophageal squamous cell carcinoma. The developed nomogram may predict individual survival accurately.

Reversible structural transformation of FeO(x) nanostructures on Pt under cycling redox conditions and its effect on oxidation catalysis.

Understanding dynamic changes of catalytically active nanostructures under reaction conditions is a pivotal challenge in catalysis research, which has been extensively addressed in metal nanoparticles but is less explored in supported oxide nanocatalysts. Here, structural changes of iron oxide (FeO(x)) nanostructures supported on Pt in a gaseous environment were examined by scanning tunneling microscopy, ambient pressure X-ray photoelectron spectroscopy, and in situ X-ray absorption spectroscopy using both model systems and real catalysts. O-Fe (FeO) bilayer nanostructures can be stabilized on Pt surfaces in reductive environments such as vacuum conditions and H2-rich reaction gas, which are highly active for low temperature CO oxidation. In contrast, exposure to H2-free oxidative gases produces a less active O-Fe-O (FeO2) trilayer structure. Reversible transformation between the FeO bilayer and FeO2 trilayer structures can be achieved under alternating reduction and oxidation conditions, leading to oscillation in the catalytic oxidation performance.

Low m6A modification-mediated upregulation of PLAC8 promotes trophoblast cell invasion and migration in preeclampsia.

BACKGROUND: The main symptoms of preeclampsia (PE), a specific ailment that develops during pregnancy, are proteinuria and hypertension. The pathological root of the onset and progression of PE is widely regarded as abnormal placental trophoblast cell function. This study aimed to look into the character and mechanism of Placenta-specific 8 (PLAC8) in trophoblast cell invasion and migration. METHODS: Expressions of PLAC8 and AlkB homologue 5 (ALKBH5) were examined by western blot and quantitative real-time PCR. The m6A level of PLAC8 mRNA was detected by methylated RNA Immunoprecipitation. Using Transwell experiments, cell invasion and migration were examined. The enzyme-linked immunosorbent assay was utilized to analyze the MMP-2 and MMP-9 secretion levels. RNA pull-down and RNA immunoprecipitation were conducted to detect the binding between ALKBH5 and PLAC8. RESULTS: In PE tissue and hypoxia-treated HTR-8/SVneo cells, levels of ALKBH5 and PLAC8 were increased, and PLAC8 m6A methylation levels were decreased. There was a positive correlation between PLAC8 and ALKBH5 expression in clinical tissues. In addition, overexpressing PLAC8 promoted HTR-8/SVneo cell migration and invasion, and so as the levels of MMP-2 and MMP-9; while interference with PLAC8 reduced the migration and invasion of hypoxia-treated HTR-8/SVneo cells, and so as the levels of MMP-2 and MMP-9. Moreover, the PLAC8 mRNA's m6A modification site was GAACU (Position 1449, Site 2). Increased levels of MMP-2 and MMP-9, as well as migration and invasion of HTR-8/SVneo cells exposed to hypoxia, were all facilitated by the m6A Site2 mutation. Furthermore, ALKBH5 could bind to PLAC8, reduce its m6A modification, and promote its expression. CONCLUSION: High-expressed ALKBH5 inhibits the m6A level of PLAC8 mRNA and promotes PLAC8 expression, while PLAC8 overexpression can promote hypoxia-induced invasion and migration of HTR-8/Svneo cells, indicating its potential protective function in PE.