Novel adhesive mineral-organic bone cements based on phosphoserine and magnesium phosphates or oxides.

Present surgical situations require a bone adhesive which has not yet been developed for use in clinical applications. Recently, phosphoserine modified cements (PMC) based on mixtures of o-phosphoserine (OPLS) and calcium phosphates, such as tetracalcium phosphate (TTCP) or α-tricalcium phosphate (α-TCP) as well as chelate setting magnesium phosphate cements have gained increasing popularity for their use as mineral bone adhesives. Here, we investigated new mineral-organic bone cements based on phosphoserine and magnesium phosphates or oxides, which possess excellent adhesive properties. These were analyzed by X-ray diffraction, Fourier infrared spectroscopy and electron microscopy and subjected to mechanical tests to determine the bond strength to bone after ageing at physiological conditions. The novel biomineral adhesives demonstrate excellent bond strength to bone with approximately 6.6-7.3 MPa under shear load. The adhesives are also promising due to their cohesive failure pattern and ductile character. In this context, the new adhesive cements are superior to currently prevailing bone adhesives. Future efforts on bone adhesives made from phosphoserine and Mg2+ appear to be very worthwhile.

Active controlled motion in early rehabilitation improves outcome after ankle fractures: a randomized controlled trial.

OBJECTIVE: To evaluate the use of active controlled motion (ACM) after unstable ankle fractures needing initial partial weight-bearing. DESIGN: Prospective randomized controlled trial. SETTING: Inpatient and outpatient clinic. SUBJECTS: A total of 50 patients with unstable ankle fractures and the need for partial weight-bearing for six weeks. INTERVENTIONS: Randomization in two groups: physiotherapy alone or physiotherapy with an additional ACM device. MAIN MEASURES: Follow-up after 6 and 12 weeks. Range of motion, visual analogue scale for foot and ankle (VAS FA), Philip score, Mazur score, American Orthopaedic Foot & Ankle Society (AOFAS) score and dynamic pedobarography. RESULTS: Range of motion was better in the ACM group at six weeks (mean 49° ± 11.1° vs. 41.3° ± 8.1°). Questionnaires revealed better outcome after six weeks in the VAS FA (56 ± 13.7 vs. 40.6 ± 10.5), Mazur score (64.4 ± 12.3 vs. 56.7 ± 11) and AOFAS score (71.2 ± 12 vs. 63.6 ± 8.7) ( P > 0.02 for all). Better outcome after 12 weeks in all questionnaires (VAS FA, 77.7 ± 13.8 vs. 61.4 ± 16.3; Philip score, 79.1 ± 10.9 vs. 60.1 ± 21.7; Mazur score, 83.9 ± 10.7 vs. 73.1 ± 14.1; AOFAS score, 87.5 ± 7.9 vs. 75.2 ± 11.7) ( P < 0.01 for all). Pressure balance was better under the midfoot region after 12 weeks in the ACM group (Δ P 4.4 N vs. 34.0 N; P = 0.01). The ACM group had an earlier return to work after 10.5 (range, 3-17) versus 14.7 (range, 9-26) weeks ( P = 0.02). CONCLUSION: The use of ACM for patients needing initial partial weight-bearing after operatively treated unstable ankle fractures in the first six postoperative weeks leads to better clinical and functional results and an earlier return to work.

Is nail-plate docking worth the effort? A biomechanical analysis of docking a plate and a nail in peri-implant femur fractures.

Purpose: The ideal treatment of peri-implant femur fractures (PIFFs) remains unclear due to the thin clinical and biomechanical evidence concerning the most suitable form of osteosynthesis. The purpose of the present study was thus to determine the biomechanical stability that results from combining a cephalomedullary nail and a plate for proximal PIFFs, especially when the nail-plate docking technique is applied. Methods: Twenty four PIFFs were simulated in both 12 foam and 12 composite specimens and were stabilized via a combination of a cephalomedullary nail and a plate. The control group (n = 6) had a nail and a plate without a connection, while the intervention group (n = 6) had a screw that connected the plate with the interlocking screw hole of the nail, thereby creating a nail-plate docking system. The specimens were evaluated under axial and torsional loading using a material-testing machine and a 3D metrology system. Results: The data regarding stiffness, failure load, and failure displacement showed significantly higher stability for specimens without nail-plate docking. For docked specimens, a non-significant trend toward a higher resistance to torque was observed. Both techniques displayed no significant difference in fracture gap displacement or total displacement. Conclusion: The present study suggests that nail-plate docking of a cephalomedullary nail, and a plate significantly decreases the stiffness and stability of osteosynthesis under axial loading. However, there seems to be a tendency toward higher resistance to torque. Therefore, surgeons should consider this technique if higher torsional stability is necessary, and they should decide against it, if axial stability is preferred.

[Implant anchorage: In vivo and in vitro analyses : Clusters for implant anchorage and safety]. / Implantatverankerung: In-vivo- und In-vitro-Analysen : Cluster Implantatverankerung und -sicherheit.

Aseptic implant loosening is the primary cause of revisions in arthroplasty. Various in vitro and in vivo methods are available for assessing implant fixation and stability. The aim of the Musculoskeletal Biomechanics Research Network (MSB-NET) is to continuously improve or develop these methods. In vitro analyses are often conducted using static and dynamic ISO and ASTM standards, while RSA, DXA, and EBRA analyses are established in vivo methods for evaluating implant fixation. Primary stability analyses, as well as acoustical methods, provide additional opportunities to detect loosening early and precisely evaluate implant stability. The cluster serves as a link between basic research, clinical practice, and end users to promote in vitro and in vivo methods to improve implant safety.

Development and preclinical evaluation of a cable-clamp fixation device for a disrupted pubic symphysis.

BACKGROUND: Traumatic separation of the pubic symphysis can destabilize the pelvis and require surgical fixation to reduce symphyseal gapping. The traditional approach involves open reduction and the implantation of a steel symphyseal plate (SP) on the pubic bone to hold the reposition. Despite its widespread use, SP-fixation is often associated with implant failure caused by screw loosening or breakage. METHODS: To address the need for a more reliable surgical intervention, we developed and tested two titanium cable-clamp implants. The cable served as tensioning device while the clamp secured the cable to the bone. The first implant design included a steel cable anterior to the pubic symphysis to simplify its placement outside the pelvis, and the second design included a cable encircling the pubic symphysis to stabilize the anterior pelvic ring. Using highly reproducible synthetic bone models and a limited number of cadaver specimens, we performed a comprehensive biomechanical study of implant stability and evaluated surgical feasibility. RESULTS: We were able to demonstrate that the cable-clamp implants provide stability equivalent to that of a traditional SP-fixation but without the same risks of implant failure. We also provide detailed ex vivo evaluations of the safety and feasibility of a trans-obturator surgical approach required for those kind of fixation. CONCLUSION: We propose that the developed cable-clamp fixation devices may be of clinical value in treating pubic symphysis separation.

Life-threatening pelvic injuries are often associated with disruption of a joint within the hip bones, called the pubic symphysis. Disruption can lead to a gap and subsequent instability of the pelvis. The current treatment is to stabilize the joint with a steel plate and screws, however this often becomes unstable soon after the operation. In this study, we analyzed two alternatives for stabilization that use cables and clamps instead of the plate. Further, we tested a surgical approach for implantation. The cables and clamps were as stable as a steel plate so offer an alternative approach to stabilize the pubic symphysis.

Influence of Tranexamic Acid on Elution Characteristics and Compressive Strength of Antibiotic-Loaded PMMA-Bone Cement with Gentamicin.

PURPOSE: The topical application of tranexamic acid (TXA) into the joint space during total joint arthroplasty (TJA) with no increase of complications, has been widely reported. We investigated the influence of TXA on antibiotic release, activity of the released antibiotic against a clinical isolate of S. aureus, and compressive strength of a widely used commercially prepared gentamicin-loaded cement brand (PALACOS R + G). METHOD: 12 bone cement cylinders (diameter and height = 6 and 12 mm, respectively) were molded. After curing in air for at least 1 h, six of the cylinders were completely immersed in 5 mL of fetal calf serum (FCS) and the other six were completely immersed in a solution consisting of 4.9 mL of FCS and 0.1 mL (10 mg) of TXA. Gentamicin elution tests were performed over 7 d. Four hundred µL of the gentamicin eluate were taken every 24 h for the first 7 d without renewing the immersion fluid. The gentamicin concentration was determined in a clinical analyzer using a homogeny enzyme immuno-assay. The antimicrobial activity of the eluate, obtained after day 7, was tested. An agar diffusion test regime was used with Staphylococcus aureus. Bacteria were grown in a LB medium and plated on LB agar plates to get a bacterial lawn. Fifty µL of each eluate were pipetted on 12-mm diameter filter discs, which were placed in the middle of the agar gel. After 24 h of cultivation at 37 °C, the zone of inhibition (ZOI) for each specimen was measured. The compressive strength of the cements was determined per ISO 5833. RESULTS: At each time point in the gentamicin release test, the difference in gentamicin concentration, obtained from specimens immersed in the FCS solution only and those immersed in the FCS + TXA solution was not significant (p = 0.055-0.522). The same trend was seen in each of the following parameters, after 7 d of immersion: (1) Cumulative gentamicin concentration (p < 0.297); (2) gentamicin activity against S. aureus (strongly visible); (3) ZOI size (mostly > 20 mm) (p = 0.631); and (4) compressive strength (p = 0.262). CONCLUSIONS: For the PALACOS R + G specimens, the addition of TXA to FCS does not produce significant decreases in gentamicin concentration, in the activity of the gentamicin eluate against a clinical isolate of S. aureus, the zone of inhibition of S. aureus, and in the compressive strength of the cement, after 7 d of immersion in the test solution.

CYR61 improves muscle force recreation in a rabbit trauma model.

BACKGROUND: Critically elevated compartment pressures after complicated tibial fractures may result in fibrosis and therefore scarring of muscles with impaired function. Several studies have shown a relationship between angiogenesis and more effective muscle regeneration. Cysteine-rich angiogenic inducer 61 (CYR61) is associated with angiogenesis but it is not clear whether it would restore muscle force, reduce scarring or improve angiogenesis after acute musculoskeletal trauma. OBJECTIVE: We researched whether local application of CYR61 (1) restores muscle force, (2) reduces scar tissue formation, and (3) improves angiogenesis. METHODS: We generated acute soft tissue trauma with temporary ischemia and increased compartment pressure in 22 rabbits and shortened the limbs to simulate surgical fracture debridement. In the test group, a CYR61-coated collagen matrix was applied locally around the osteotomy site. After 10 days of limb shortening, gradual distraction of 0.5 mm per 12 hours was performed to restore the original length. Muscle force was measured before trauma and on every fifth day after trauma. Forty days after trauma we euthanized the animals and histologically determined the percentage of connective and muscle tissue. Immunohistology was performed to analyze angiogenesis. RESULTS: Recovery of preinjury muscle strength was significantly greater in the CYR61 group (2.8 N; 88%) as compared to the control (1.8 N; 53%) with a moderate reduction of connective tissue (9.9% vs. 8.5%). Immunohistochemical staining showed that blood vessel formation increased significantly (trauma vs. control 38.75 ± 27.45 mm2 vs. 24.16 ± 19.81 mm2). CONCLUSIONS: Local application of CYR61 may improve restoration of muscle force and accelerate muscle force recovery by improving angiogenesis and moderately reducing connective tissue.

Trans-obturator cable fixation of open book pelvic injuries.

Operative treatment of ruptured pubic symphysis by plating is often accompanied by complications. Trans-obturator cable fixation might be a more reliable technique; however, have not yet been tested for stabilization of ruptured pubic symphysis. This study compares symphyseal trans-obturator cable fixation versus plating through biomechanical testing and evaluates safety in a cadaver experiment. APC type II injuries were generated in synthetic pelvic models and subsequently separated into three different groups. The anterior pelvic ring was fixed using a four-hole steel plate in Group A, a stainless steel cable in Group B, and a titan band in Group C. Biomechanical testing was conducted by a single-leg-stance model using a material testing machine under physiological load levels. A cadaver study was carried out to analyze the trans-obturator surgical approach. Peak-to-peak displacement, total displacement, plastic deformation and stiffness revealed a tendency for higher stability for trans-obturator cable/band fixation but no statistical difference to plating was detected. The cadaver study revealed a safe zone for cable passage with sufficient distance to the obturator canal. Trans-obturator cable fixation has the potential to become an alternative for symphyseal fixation with less complications.

Heterotopic Ossification - Complication or Chance? / Heterotope Ossifikation ­ Komplikation oder Chance?

So far, there has been no clear explanation of the pathophysiological relationships in the development of HO. There is little experimental data dealing with the post-traumatic inflammatory response in terms of a balance between the repair of damaged muscle cells and the opposite response in its development. There are numerous indications regarding possible predisposing factors, such as existence of surrounding tissue hypoxia or the function of pro-angiogenic (VEGF e.g.) and osteoinductive (BMP e.g.) factors. These different scientific approaches offer the opportunity to clinically intervene. In our opinion, early intervention seems to make the most sense in terms of effectiveness and recurrence of HO. An important pathomechanism seems to be chronic inflammation. Currently, non-steroidal anti-inflammatory drugs are the most commonly prescribed prophylaxis drugs. The effectiveness and efficacy of non-steroidal anti-inflammatory drugs is limited by the time-limited release and the side effect potential. Therefore, it is interesting to focus future research towards the cross-talks between immunosuppressive downregulation of the inflammatory response and its effect on the balance between muscle regeneration and the development of HO.

Suture material for flexor tendon repair: 3-0 V-Loc versus 3-0 Stratafix in a biomechanical comparison ex vivo.

BACKGROUND: Barbed suture material offers the possibility of knotless flexor tendon repair, as suggested in an increasing number of biomechanical studies. There are currently two different absorbable barbed suture products available, V-Loc and Stratafix, and both have not been compared to each other with regard to flexor tendon repair. The purpose of this study was to evaluate both suture materials for primary stability under static and cyclic loading in a biomechanical ex vivo model. METHODS: Forty fresh porcine flexor digitorum profundus tendons were randomized in two groups. A four-strand modified Kessler suture technique was used to repair the tendon either with a 3-0 V-Loc or 3-0 Stratafix without a knot. Parameters of interest were mode of failure, 2-mm gap formation force, displacement, stiffness and maximum load under static and cyclic testing. RESULTS: The maximum load was 42.3 ± 7.2 for the Stratafix group and 50.7 ± 8.8 N for the V-Loc group. Thus, the ultimate tensile strength was significantly higher for V-Loc (p < 0.05). The 2-mm gap occurred at 24.8 ± 2.04 N in the Stratafix group in comparison to 26.5 ± 2.12 N in the V-Loc group (n.s.). Displacement was 2.65 ± 0.56 mm in the V-Loc group and 2.71 ± 0.59 mm in the Stratafix group (n.s.). Stiffness was 4.24 ± 0.68 (N/mm) in the V-Loc group and 3.85 ± 0.55 (N/mm) the Stratafix group (n.s.). Those measured differences were not significant. CONCLUSION: V-Loc demonstrates a higher maximum load in tendon reconstruction. The differences in 2-mm gap formation force, displacement and stiffness were not significant. Hereby, the V-Loc™ has an advantage when used as unidirectional barbed suture for knotless flexor tendon repair.