RESUMEN
Polyimide is commonly used as a substrate for flexible electronic devices because of its excellent thermal, physical, and electrical properties. To enhance the adhesion between substrates and electrodes, it is necessary to improve the hydrophilic properties of the polyimide. Various surface treatments, such as plasma treatment, laser ablation, and ultraviolet treatments, have been applied for this purpose. In this study, we demonstrated that Cu and Ti ion beam irradiation can temporarily create a superhydrophilic surface on polyimide after irradiation. When Cu or Ti ions bombarded the polyimide, the contact angle changed systematically with the beam current density and over time. We present atomic force microscopy (AFM) data for polyimide irradiated with Cu and Ti ions at different beam current densities and discuss the possible mechanisms behind the changes in the contact angle.
RESUMEN
There are various different approaches in synthesizing graphene including chemical vapor deposition (CVD) and solid-phase method, where gas or solid type carbon source, to be converted into graphene, interacts with transition metals such as nickel and copper. When any thin nickel layer coated atop the polyacrylonitrile (PAN) film is pyrolyzed at a sufficiently high temperature, it is impossible to grow a continuous graphene film with a large area owing to dewetting, which has restricted the subsequent utilization in practical applications. Herein, we suggest a method to synthesize a continuous graphene-like nanofilm with a nickel coated thin PAN film through pyrolysis at 750 to 800 °C in a high-vacuum furnace without a reductive gas flow. The graphene-like nanofilm obtained was characterized using Raman spectroscopy, Raman mapping, field-emission scanning electron microscopy, X-ray photoelectron spectroscopy, and field-emission transmission electron microscopy.
RESUMEN
We present the first work of the synthesis mechanism from graphene quantum dots (GQDs) to carbon nanotubes (CNTs) by an ion-sputtering assisted chemical vapor deposition. During the annealing process, a Pt thin film deposited by the ion-sputtering was dewetted and agglomerated to form many nanometer-sized particles, leading to Pt nanoparticles (PtNPs) that can act as catalysts for creating carbon allotropes. The shape of the allotropes can be effectively tailored from GQDs to CNTs by controlling three key parameters such as the dose of catalytic ions (D), amounts of carbon source (S), and thermal energy (T). In our work, it was clearly proved that the growth control from GQDs to CNTs has a comparably proportional relationship with D and S, but has a reverse proportional relationship with T. Furthermore, high-purity GQDs without any other by-products and the CNTs with the cap of PtNPs were generated. Their shapes were appropriately controlled, respectively, based on the established synthesis mechanism.
RESUMEN
H+ irradiation increases the surface hardness of polycarbonate. Nano indentation measurement shows that the hardness increases up to 3.7 GPa at the dose of 5 × 1016 # cm-2 and at the irradiation energy of 150 keV. In addition, the hardness increases with the dose and the energy of H+ irradiation. In accordance with the nano indentation measurement, the Fourier-transform infrared spectroscopy (FTIR) depends on the dose and energy of H+ irradiation. The peak at â¼1500 cm-1 for the aromatic ring and the peak at â¼1770 cm-1 for the C[double bond, length as m-dash]O stretch decrease with increasing dose and energy, while the increase of the dose and energy develops a new C[double bond, length as m-dash]O stretch vibration at â¼1700 cm-1 and forms aromatic hydrocarbons at â¼1600 cm-1. X-ray diffraction experiments are also consistent with the nano indentation measurement and FTIR spectra. Based on the experiments, we discuss a possible mechanism of the surface hardness enhancements by ion beam irradiation.
RESUMEN
The effects of electron-beam irradiation on the organic semiconductor rubrene and its application as a dosimeter was investigated. Through the measurements of photoluminescence and the ultraviolet photoelectron spectroscopy, we found that electron-beam irradiation induces n-doping of rubrene. Additionally, we fabricated rubrene thin-film transistors with pristine and irradiated rubrene, and discovered that the decrease in transistor properties originated from the irradiation of rubrene and that the threshold voltages are shifted to the opposite directions as the irradiated layers. Finally, a highly sensitive and air-stable electron dosimeter was fabricated based on a rubrene transistor.
RESUMEN
We have presented a mechanism to explain why the resulting oxide morphology becomes a porous or a tubular nanostructure when a zircaloy is electrochemically anodized. A porous zirconium oxide nanostructure is always formed at an initial anodization stage, but the degree of interpore dissolution determines whether the final morphology is nanoporous or nanotubular. The interpore dissolution rate can be tuned by changing the anodization parameters such as anodization time and water content in an electrolyte. Consequently, porous or tubular oxide nanostructures can be selectively fabricated on a zircaloy surface by controlling the parameters. Based on this mechanism, zirconium oxide layers with completely nanoporous, completely nanotubular, and intermediate morphologies between a nanoporous and a nanotubular structure were controllably fabricated.
RESUMEN
Silicon (Si) nanostructures that exhibit a significantly low reflectance in ultraviolet (UV) and visible light wavelength regions are fabricated using a hydrogen etching process. The fabricated Si nanostructures have aperiodic subwavelength structures with pyramid-like morphologies. The detailed morphologies of the nanostructures can be controlled by changing the etching condition. The nanostructured Si exhibited much more reduced reflectance than a flat Si surface: an average reflectance of the nanostructured Si was approximately 6.8% in visible light region and a slight high reflectance of approximately 17% in UV region. The reflectance was further reduced in both UV and visible light region through the deposition of a poly(dimethylsiloxane) layer with a rough surface on the Si nanostructure: the reflectance can be decreased down to 2.5%. The enhancement of the antireflection properties was analyzed with a finite difference time domain simulation method.
RESUMEN
Graphene can be synthesized from polyacrylonitrile (PAN) polymer through pyrolysis. A metal catalyst such as nickel (Ni) is required for the conversion of the polymer to graphene. The metal catalysts can be placed either atop or underneath the polymer precursor. We observed that spatially non-uniform and disconnected graphene was fabricated when PAN film coated with a Ni layer was pyrolyzed, resulting in flake-like graphene. Formation of the flake-like graphene is attributed to the dewetting of the Ni layer coated on the PAN film. Dewetting phenomenon can be reduced by decreasing the pyrolysis temperature, and hence, more uniform graphene could be prepared. The effects of Ni coating thickness and the pyrolysis temperature on the fabricated graphene have been experimentally analyzed.
RESUMEN
The angular distribution of characteristic X-rays using a partial-transmission tungsten target was analyzed. Twenty four tallies were modeled to cover a 360° envelope around the target. The Monte Carlo N-Particle (MCNP5) simulation results revealed that the characteristic X-ray flux is not always isotropic around the target. Rather, the flux mainly depends on the target thickness and the energy of the incident electron beam. A multi-energy photon generator is proposed to emit high-energy characteristic X-rays, where the target acts as a filter for the low-energy characteristic X-rays.
RESUMEN
Carbon nanotube (CNT) field emitters that exhibit extremely high stability against high-voltage arcing have been demonstrated. The CNT emitters were fabricated on a sharp copper tip substrate that produces a high electric field. A metal mixture composed of silver, copper, and indium micro- and nanoparticles was used as a binder to attach CNTs to the substrate. Due to the strong adhesion of the metal mixture, CNTs were not detached from the substrate even after many intense arcing events. Through electrical conditioning of the as-prepared CNT emitters, vertically standing CNTs with almost the same heights were formed on the substrate surface and most of loosely bound impurities were removed from the substrate. Consequently, no arcing was observed during the normal operation of the CNT emitters and the emission current remained constant even after intentionally inducing arcing at current densities up to 70 mA/cm2.
RESUMEN
A vacuum-sealed miniature X-ray tube based on a carbon nanotube field-emission electron source has been demonstrated. The diameter of the X-ray tube is 10 mm; the total length of the tube is 50 mm, and no external vacuum pump is required for the operation. The maximum tube voltage reaches up to 70 kV, and the X-ray tube generates intense X-rays with the air kerma strength of 108 Gy·cm2 min-1. In addition, X-rays produced from the miniature X-ray tube have a comparatively uniform spatial dose distribution.