Sterilisation of biopharmaceuticals: Effect of gamma irradiation, e-beam irradiation and nitrogen dioxide on human insulin.

Biopharmaceuticals are administered parenterally and therefore sterility is required. Sterility can be obtained via different processes including exposure to steam or dry heat. Sterilisation studies on biopharmaceuticals, which are highly sensitive medicinal products, are scarce. This study investigates the effect of different sterilisation processes on recombinant human insulin in solid state (gamma and e-beam irradiation (w/wo dry ice), nitrogen dioxide (NO2)) and in aqueous solution (gamma irradiation (w/wo dry ice, w/wo glycerin)) using ultra-high performance liquid chromatography-diode array detection-mass spectrometry. It is observed that NO2 substantially degrades the solid samples, while gamma and e-beam irradiation result in lower levels of degradation (mean normalized peak areas of 95.2-96.2 % with respect to the non-sterilised samples). Gamma irradiation of insulin solutions with and without dry ice at 2.5 kGy results in mean normalised peak areas of 85 % and <40 % with respect to the non-sterilised samples, respectively. It is concluded that sterilisation using ionising radiation of liquid biopharmaceuticals with insulin and sterilisation of insulin dry powder using NO2 is less suitable with the set-ups used here because of substantial degradation. In contrast, evidence is presented in favour of sterilisation of insulin dry powder using ionising radiation.

The effect of Gamma and Ethylene Oxide Sterilization on a Selection of Active Pharmaceutical Ingredients for Ophthalmics.

Ensuring the sterility of life science products plays a pivotal role in the healthcare sector. Gamma irradiation and ethylene oxide sterilization are two commonly applied methods for the sterilization of medical devices, packaging components and Active Pharmaceutical Ingredients (API) for medicinal products. Focussed studies on the effects of sterilization processes on APIs remain limited. In this research study, five APIs, frequently used in sterile ophthalmic preparations were subjected to both gamma irradiation and ethylene oxide under different process conditions. The following APIs of GMP quality were selected: dexamethasone, aciclovir, tetracycline hydrochloride, triamcinolone and methylprednisolone. Analyses were performed using High Performance Liquid Chromatography equipped with UV detection and the effect of sterilization conditions on the APIs was evaluated by the assay and related substances test prescribed by the European Pharmacopoeia (Ph. Eur.). It was concluded that exposure to ethylene oxide resulted in compliance with Ph. Eur. for all APIs. While dexamethasone and methylprednisolone did not meet the requirement for the Ph. Eur. after exposure to gamma irradiation, the other three APIs did meet the requirement under the specified irradiation conditions. Subsequent optimization of sterilization parameters positively influenced the compliance to the Ph. Eur. requirements.

Comparison of two column characterisation systems based on pharmaceutical applications.

A useful column characterisation system should help chromatographers to select the most appropriate column to use, e.g. when a particular chromatographic column is not available or when facing the dilemma of selecting a suitable column for analysis according to an official monograph. Official monographs of the European Pharmacopoeia and the United States Pharmacopeia are not allowed to mention the brand name of the stationary phase used for the method development. Also given the overwhelming offer of several hundreds of commercially available reversed-phase liquid chromatographic columns, the choice of a suitable column could be difficult sometimes. To support rational column selection, a column characterisation study was started in our laboratory in 2000. In the same period, Euerby et al. also developed a column characterisation system, which is now released as Column Selector by ACD/Labs. The aim of this project was to compare the two existing column characterisation systems, i.e. the KUL system and the Euerby system. Other research groups active in this field will not be discussed here. Euerby et al. developed a column characterisation system based on 6 test parameters, while the KUL system is based on 4 chromatographic parameters. Comparison was done using a set of 63 columns. For 7 different pharmaceutical separations (fluoxetine, gemcitabine, erythromycin, tetracycline, tetracaine, amlodipine and bisacodyl), a ranking was built based on an F-value (KUL method) or Column Difference Factor value (Euerby method) versus a (virtual) reference column. Both methods showed a similar ranking. The KUL and Euerby methods do not perfectly match, but they yield very similar results, allowing with a relatively high certainty, the selection of similar or dissimilar columns as compared to a reference column. An analyst that uses either of the two methods, will end up with a similar ranking. From a practical point of view, it must be noted that the KUL method only includes 4 parameters and 3 chromatographic methods compared to 6 parameters and 4 methods for the Euerby method. Hence, the time needed to determine the chromatographic properties of a column is shorter for the KUL approach. Access to the KUL method also requires no download procedures.

Evaluation of an International Pharmacopoeia method for the analysis of ritonavir by liquid chromatography.

A gradient LC method for the determination of related substances in ritonavir (RTV) has been recently published in the International Pharmacopoeia. The method uses a base-deactivated reversed-phase C18 column kept at a temperature of 35 degrees C. The mobile phases consist of acetonitrile, phosphate buffer pH 4.0 and water. UV detection is performed at 240 nm. A system suitability test (SST) is described to govern the quality of the separation. Since no brand names of columns are mentioned in pharmacopoeial texts, analysts often have problems to select a suitable stationary phase which is only described in general terms. So, the separation towards RTV components was investigated on 18 C18 columns and correlation was made with the column classification system developed in our laboratory. The method was further evaluated using a Hypersil BDS C18 column (25 cm x 4.6mm i.d.), 5 microm, which was also used for the development of the method. A central composite design was applied to examine the robustness of the method. The method shows good precision, linearity, sensitivity and robustness. Four commercial samples were examined using this method.

Application of an improved column characterisation system to evaluate the within and between batch variability.

The selection of a reversed-phase liquid chromatographic column with suitable selectivity for a particular separation is difficult if the brand name of the column is not known. A project to develop a chromatographic test procedure to characterize reversed-phase liquid chromatography C18 columns was started earlier and resulted in a fast, simple, repeatable and reproducible test procedure using four column parameters. Here, this procedure is used to evaluate the diversity of columns originating from the same batch as well as from different batches. The determination of one of the parameters, the retention factor of 2,2'-dipyridyl, was improved and a simplified test procedure is proposed.

Column selection for pharmaceutical analyses based on a column classification using four test parameters.

This paper focuses on the usability of a previously developed column classification system, applied to pharmaceutical analyses. The separation of two drugs from their respective related substances was investigated on 65 new reversed-phase liquid chromatographic columns. The chromatographic procedure for fluoxetine hydrochloride was performed according to the method prescribed in the European Pharmacopoeia monograph while the separation of gemcitabine hydrochloride was carried out according to the United States Pharmacopeia monograph. It was shown that the column ranking system is a helpful tool in the selection of a suitable column.

Facilitated column selection in pharmaceutical analyses using a simple column classification system.

In this paper, the performance of a previously developed classification system applied to pharmaceutical chromatographic analyses, is investigated. The separation of seven different drug substances from their respective impurities was studied. The chromatographic procedure for acetylsalicylic acid, clindamycin hydrochloride, buflomedil hydrochloride, chloramphenicol sodium succinate, nimesulide and phenoxymethylpenicillin was performed according to the corresponding European Pharmacopoeia (Ph. Eur.) monograph. The separation of dihydrostreptomycin sulphate was performed according to the literature. It is shown that the column ranking system is a helpful tool in the selection of a suitable column in these analyses.

Investigation of degradation products in a topical gel containing erythromycin and benzoyl peroxide by liquid chromatography-mass spectrometry.

Benzamycin, combining benzoyl peroxide and erythromycin, is a topical gel used in the treatment of acne vulgaris. Because of the reactivity of benzoyl peroxide, preparations containing both erythromycin and benzoyl peroxide might be unstable and degradation products could be formed. To investigate and identify these latter products, a gradient-based liquid chromatographic method using volatile mobile phase constituents was developed. Mass spectrometry data were acquired on solutions containing erythromycin and benzoyl peroxide and on freshly prepared, 2-month-old and 18-month-old samples of Benzamycin. With the reference spectra as interpretative templates, it was concluded that erythromycin undergoes oxidation, followed by benzoylation.

Silica-based monolithic columns versus conventional particle-packed columns for liquid chromatographic analysis of tetracycline, oxytetracycline and chlortetracycline.

The rise of monolithic stationary phases offers to routine and research laboratories several advantages. In spite of their recent discovery, they have rapidly become highly popular separation media for liquid chromatography. Time reduction and economic reasons like e.g. a diminished use of mobile phase are the most important ones. At the same time, it was reported that these columns offer a faster and better separation. The aim of this article was to investigate the transferability of methods originally developed on conventional particle-packed C(18) columns (XTerra RP18 and Zorbax RX), onto the more recent monolithic columns. Both types, conventional particle-packed and monolithic columns, were able to separate tetracycline, oxytetracycline and chlortetracycline from their respective impurities with sufficient resolution, but showed remarkably shorter analysis times and lower backpressures, improving the lifetime of the column.

Evaluation of two approaches to characterise liquid chromatographic columns using pharmaceutical separations.

In this paper a comparison of two column characterisation systems is reported: the method based on the hydrophobic-subtraction model of Dolan and Snyder (HS method) versus the method developed at the Katholieke Universiteit Leuven (KUL method). Comparison was done for seven different pharmaceutical separations (fluoxetine, gemcitabine, erythromycin, tetracycline, tetracaine, amlodipine and bisacodyl), using a set of 59 columns. A ranking was built based on an F value (KUL) or F(s) value (HS) versus a (virtual) reference column. Both methods showed similar probabilities of ranking patterns. Correlation of the respective test parameters of both approaches was poor. Both methods are not perfect and do not match well, but anyhow yield results which allow, with a relatively high certainty, the selection of similar or dissimilar columns as compared to a reference column. An analyst that uses either of the two methods will end up with a similar probability to choose an adequate column. From a practical point of view, it must be noted that the KUL method is easier to use.

Effect of long-term storage and use on the properties of reversed-phase liquid chromatographic columns.

In order to study column deterioration as a result of long-term storage and/or usage in liquid chromatography analyses, 55 pairs (same batch) of different commercial reversed-phase C(18) columns were examined using an already existing column characterisation system. After initial testing, one column was stored and the other was used to analyse different pharmaceuticals. All columns were characterized by four chromatographic parameters reflecting hydrophobicity, silanol activity, metal impurity and steric selectivity at the beginning and at the end of the test. An F-value was calculated to express the change of column properties with one single number. After performing analyses, higher F-values were obtained as compared to the non-used, stored columns. Although the time during which the columns were used to perform analyses was relatively short, an obvious influence was noticed, mainly resulting from small changes in silanol activity and hydrophobicity. Most of the affected columns have no endcapping and/or no base deactivation, making them more vulnerable for degradation, resulting in higher silanol activity and faster ageing. This effect is observed less with columns equipped with polar-embedded groups and/or polar endcapping, protecting the column by blocking the silanol groups and attracting a shielding water layer. Also columns with higher coverages and bulky or long chains show more resistance towards degradation.

Classification of reversed-phase columns based on their selectivity towards vancomycin compounds.

The selection of a reversed-phase liquid chromatographic (RP-LC) column with suitable selectivity for a particular separation is difficult if the brand name of the column is not known. The monographs of the European Pharmacopoeia and other official compendia for drug analysis only give a general description of the stationary phase to be used in the operating procedure of a liquid chromatographic method. A project to develop a chromatographic test procedure to characterise RP-LC C(18) columns was started earlier and resulted in a fast, simple, repeatable and reproducible test procedure. Four column parameters, determined on 69 RP-LC C(18) columns, allowed the characterisation and ranking of these columns. In this paper, an overview of this column classification system is given with an application on the separation of vancomycin and some of its impurities. It is shown that the column ranking system is a helpful tool in the selection of a suitable column.