RESUMEN
An advanced materials solution utilizing the concept of "smart catalysts" could be a game changer for today's automotive emission control technology, enabling the efficient use of precious metals via their two-way switching between metallic nanoparticle forms and ionic states in the host perovskite lattice as a result of the cyclical oxidizing/reducing atmospheres. However, direct evidence for such processes remains scarce; therefore, the underlying mechanism has been an unsettled debate. Here, we use advanced scanning transmission electron microscopy to reveal the atomic-scale behaviors for a LaFe0.95Pd0.05O3-supported Ir-Pd-Ru nanocatalyst under fluctuating redox conditions, thereby proving the reversible dissolution/exsolution for Ir and Ru but with a limited occurrence for Pd. Despite such selective dissolution during oxidation, all three elements remain cooperatively alloyed in the subsequent reduction, which is a key factor in preserving the catalytic activity of the ternary nanoalloy while displaying its self-regenerating functionality and control of particle agglomeration.
RESUMEN
High-entropy oxide nanoparticles (HEO NPs) have been intensively studied because of their attractive properties, such as high stability and enhanced catalytic activity. In this work, for the first time, denary HEO NPs were successfully synthesized using a continuous supercritical hydrothermal flow process without calcination. Interestingly, this process allows the formation of HEO NPs on the order of seconds at a relatively lower temperature. The synthesized HEO NPs contained 10 metal elements, La, Ca, Sr, Ba, Fe, Mn, Co, Ru, Pd, and Ir, and had a perovskite-type structure. Atomic-resolution high-angle annular dark-field scanning transmission electron microscopy and energy-dispersive X-ray spectroscopy measurements revealed homogeneous dispersion of the 10 metal elements. The obtained HEO NPs also exhibited a higher catalytic activity for the CO oxidation reaction than that of the LaFeO3 NPs.
RESUMEN
The crystal structure of Co-based perovskite oxides (ACoO3) can be controlled by adjusting the A-site elements. In this study, we synthesized Y1-xBaxCoO3-δ (x = 0, 0.5, and 1.0) via a coprecipitation method and investigated their CO oxidation performances. YCoO3 (x = 0; cubic perovskite oxide; Pbnm) shows a higher catalytic performance than Y0.5Ba0.5CoO2.72 (x = 0.5; A-site-ordered double perovskite oxide; P4/nmm), which exhibits high oxygen nonstoichiometric properties, and BaCoO3 (x = 1.0; hexagonal perovskite oxide; P63/mmc), which contains high-valent Co4+ species. To elucidate the reaction mechanism, we conducted isotopic experiments with CO and 18O2. The CO oxidation reaction on YCoO3 proceeds via the Langmuir-Hinshelwood mechanism, which is a surface reaction of CO and O2 gas that does not utilize lattice oxygen. Because of the significantly smaller specific surface area of YCoO3 compared with that of the reference Pt/Al2O3, the bulk features of the crystal structures affect the catalytic reaction. When density functional theory is applied, YCoO3 clearly exhibits semiconducting properties in the ground state with the diamagnetic t2g6eg0 states, which can translate to a magnetic t2g5eg1 configuration upon excitation by a relatively low energy of 0.64 eV. We propose that the unique nature of YCoO3 activates oxygen in the gas phase, thereby enabling the smooth oxidation of CO. This study demonstrates that the bulk properties originating from the crystal structure contribute to the catalytic activity and reaction mechanism.
RESUMEN
This study provided an effective strategy to construct dual-atom sites by solid-solution alloying. A slow synthesis methodology was established for the solid-solution preparations as dual-atom-site catalysts. The atomic-level homogeneous Pdx Rh1-x dual-atom-site catalysts were successfully synthesized over the whole composition range, as evidenced by X-ray powder diffraction and scanning transmission electron microscope energy-dispersive X-ray spectroscopy mapping measurements. The challenging morphology formation in the immiscible alloys was achieved by an energy-controlling process as the octahedral Rh-rich alloys. The Pd0.3 Rh0.7 dual-atom-site catalyst had unique surface states to activate the key reactants of CO and NO in the complex three-way catalytic reactions, and it performed significantly better than pure Rh.
RESUMEN
We report on Cu/amUiO-66, a composite made of Cu nanoparticles (NPs) and amorphous [Zr6 O4 (OH)4 (BDC)6 ] (amUiO-66, BDC=1,4-benzenedicarboxylate), and Cu-ZnO/amUiO-66 made of Cu-ZnO nanocomposites and amUiO-66. Both structures were obtained via a spray-drying method and characterized using high-resolution transmission electron microscopy, energy dispersive spectra, powder X-ray diffraction and extended X-ray absorption fine structure. The catalytic activity of Cu/amUiO-66 for CO2 hydrogenation to methanol was 3-fold that of Cu/crystalline UiO-66. Moreover, Cu-ZnO/amUiO-66 enhanced the methanol production rate by 1.5-fold compared with Cu/amUiO-66 and 2.5-fold compared with γ-Al2 O3 -supported Cu-ZnO nanocomposites (Cu-ZnO/γ-Al2 O3 ) as the representative hydrogenation catalyst. The high catalytic performance was investigated using in situ Fourier transform IR spectra. This is a first report of a catalyst comprising metal NPs and an amorphous metal-organic framework in a gas-phase reaction.
RESUMEN
Niobium pentoxide particles with a complex three-dimensional (3D) nanostructure consisting of a spiky structure have been developed as recyclable and recoverable Lewis acid catalysts. The morphology of the niobium pentoxide was successfully controlled from 1D to 3D via a bridging-ligand-assisted hydrothermal treatment, without changing the crystal structure. Compared with dispersed one-dimensional (1D) niobium pentoxide nanorods with a major-axis length and minor-axis length of 20 nm and 5-8 nm, respectively, the spiky-shaped niobium pentoxide composed of 300 nm spherical cores and nanorods with a minor-axis length of 5 nm maintained its surface nanostructure even after calcination at 400 °C in air. The 400 °C-calcined spiky particles exhibited the highest production rate of 2-((4-methoxyphenyl)amino)-2-phenylacetonitrile (0.115 mmol m-2) in a Strecker reaction, resulting in a nanoscale and ordered surface structure of spiky particles that simultaneously exhibit high specific reactivity and high structural stability. Acid site analysis and Raman spectroscopy revealed that stable nanorods that grew in the (001) orientation functioned as Lewis acid catalysts and that the origin of the acidity was a flexible Nb-O polyhedral structure in the single-nanoscale (<10 nm) niobium oxide rods. This study proposes that the spiky-shaped niobium pentoxide exhibits sintering resistivity and high activity and has potential applications as a recoverable and recyclable solid acid catalyst.
RESUMEN
Ru is an important catalyst in many types of reactions. Specifically, Ru is well known as the best monometallic catalyst for oxidation of carbon monoxide (CO) and has been practically used in residential fuel cell systems. However, Ru is a minor metal, and the supply risk often causes violent fluctuations in the price of Ru. Performance-improved and cost-reduced solid-solution alloy nanoparticles of the Cu-Ru system for CO oxidation are now presented. Over the whole composition range, all of the Cux Ru1-x nanoparticles exhibit significantly enhanced CO oxidation activities, even at 70â at % of inexpensive Cu, compared to Ru nanoparticles. Only 5â at % replacement of Ru with Cu provided much better CO oxidation activity, and the maximum activity was achieved by 20â at % replacement of Ru by Cu. The origin of the high catalytic performance was found as CO site change by Cu substitution, which was investigated using inâ situ Fourier transform infrared spectra and theoretical calculations.
RESUMEN
Nitrogen oxides represent one of the main threats for the environment. Despite decades of intensive research efforts, a sustainable solution for NOx removal under environmental conditions is still undefined. Using theoretical modelling, material design, state-of-the-art investigation methods and mimicking enzymes, it is found that selected porous hybrid iron(II/III) based MOF material are able to decompose NOx, at room temperature, in the presence of water and oxygen, into N2 and O2 and without reducing agents. This paves the way to the development of new highly sustainable heterogeneous catalysts to improve air quality.
RESUMEN
An environmental catalyst in which a transition metal (Mn, Fe, or Co) was substituted into the Ti site of the host material, SrTiO3, was synthesized, and the reactivity of lattice oxygen was evaluated. For CO oxidation, Mn- and Co-doped SrTiO3 catalysts, which provided high thermal stabilities, exhibited higher activities than Pt/Al2O3 catalysts despite their low surface areas. Temperature-programmed reduction experiments using X-ray absorption fine structure (XAFS) measurements showed that the lattice oxygen of Co-doped catalyst was released at the lowest temperature. Isotopic experiments with CO and 18O2 revealed that the lattice oxygen was involved in CO oxidation on Fe- and Co-doped catalysts; that is, CO oxidation on these catalysts proceeded via the Mars-van Krevelen mechanism. On the other hand, for Mn-doped catalyst, the contribution of lattice oxygen to CO oxidation was relatively negligible, indicating that the reaction proceeded according to the Langmuir-Hinshelwood mechanism. This paper clearly demonstrates that the catalytic mechanism can be adjusted by substituting transition metals into SrTiO3.
RESUMEN
We report the significantly enhanced CO oxidation activity of Pd nanoparticles covered with [Zr6O4(OH)4(BDC)6] (UiO-66, BDC = 1,4-benzenedicarboxylate). The catalytic activity was much higher than those of Pd and Ru nanoparticles on ZrO2. The origin of the enhancement was suggested to be a change in the CO adsorption properties on Pd nanoparticles.
RESUMEN
The thermal deactivation of Pd/CeO2-ZrO2 (Pd/CZ) three-way catalysts was studied via nanoscale structural characterization and catalytic kinetic analysis to obtain a fundamental modeling concept for predicting the real catalyst lifetime. The catalysts were engine-aged at 600-1100 °C and used for chassis dynamometer driving test cycles. Observations using an electron microscope and chemisorption experiments showed that the Pd particle size significantly changed in the range of 10-550 nm as a function of aging temperatures. The deactivated catalyst structure was modeled using different-sized hemispherical Pd particles that were in intimate contact with the support surface. Therefore, Pd/CZ contained two types of surface Pd sites residing on the surface of a hemisphere (Pds) and circular periphery of the Pd/CZ interface (Pdb), whereas a reference catalyst, Pd/Al2O3, contained only Pds. In all Pd particle sizes investigated herein, Pd/CZ exhibited higher reaction rates than Pd/Al2O3, which nonlinearly increased with increasing slope as the weight-based number of surface-exposed Pd atoms ([Pds] + [Pdb]) increased. This finding contrasted with that of Pd/Al2O3, where the reaction rate linearly increased with [Pds]. When the Pds sites in both catalysts were equivalent in terms of their specific activities, the activity difference between Pd/CZ and Pd/Al2O3 corresponded to the contribution from Pdb, where oxygen storage/release to/from CZ played a key role. This contribution linearly increased with [Pdb] and therefore decreased with Pd sintering. Although both Pds and Pdb sites showed nearly constant turnover frequencies despite the difference in the Pd particle size, the values for Pdb were more than 2 orders of magnitude greater than those for Pds when assuming a single-atom width one-dimensional Pdb row model. These results suggest that the thermal deterioration of the three-phase boundary site, where Pd, CZ, and the gas phase meet, determines the activity under surface-controlled conditions.
RESUMEN
This study provides a coreduction methodology for solid solution formation in immiscible systems, with an example of a whole-region immiscible Cu-Ru system. Although the binary Cu-Ru alloy system is very unstable in the bulk state, the atomic-level well-mixed CuRu solid solution nanoparticles were found to have high thermal stability up to at least 773 K in a vacuum. The exhaust purification activity of the CuRu solid solution was comparable to that of face-centred cubic Ru nanoparticles. According to in situ infrared measurements, stronger NO adsorption and higher intrinsic reactivity of the Ru site on the CuRu surface than that of a pure Ru surface were found, affected by atomic-level Cu substitution. Furthermore, CuRu solid solution was a versatile catalyst for purification of all exhaust gases at a stoichiometric oxygen concentration.
RESUMEN
The promoting effect of CeO2 on the catalytic performance of Y2O3, which is moderately active catalyst, for the oxidative coupling of methane (OCM) reaction was investigated. The addition of CeO2 into Y2O3 by coprecipitation method caused a significant increase in not only CH4 conversion but also C2 (C2H6/C2H4) selectivity in the OCM reaction. C2 yield at 750 °C was increased from 5.6% on Y2O3 to 10.2% on 3 mol% CeO2/Y2O3. Further increase in the CeO2 loading caused an increase in non-selective oxidation of CH4 to CO2. A good correlation between the catalytic activity for the OCM reaction and the amount of H2 consumption for the reduction of surface/subsurface oxygen species in the H2-TPR profile was observed, suggesting the possibility that highly dispersed CeO2 particles act as catalytically active sites in the OCM reaction. The 16O/18O isotopic exchange reaction suggested that the beneficial role of CeO2 in the OCM reaction is to promote the formation of active oxygen species via the simple hetero-exchange mechanism, resulting in the promotion of CH4 activation.
RESUMEN
Highly stable and active low-temperature CO oxidation catalysts without noble metals are desirable to achieve a sustainable society. While zero-dimensional to three-dimensional Co3O4 nanoparticles show high catalytic activity, simple-structured nanocrystals easily self-aggregate and become sintered during catalytic reaction. Thus, complex three-dimensional nanostructures with high stability are of considerable interest. However, the controlled synthesis of complex nanoscale shapes remains a great challenge as no synthesis theory has been established. In this study, 100 nm raspberry-shaped nanoparticles composed of 7â»8 nm Co3O4 nanoparticles were synthesized by hydrothermally treating cobalt glycolate solution with sodium sulfate. Surface single nanometer-scale structures with large surface areas of 89 m²·g-1 and abundant oxygen vacancies were produced. The sulfate ions functioned as bridging ligands to promote self-assembly and suppress particle growth. The Co3O4 nano-raspberry was highly stable under catalytic tests at 350 °C and achieved nearly 100% CO conversion at room temperature. The addition of bridging ligands is an effective method to control the formation of complex but ordered three-dimensional nanostructures that possessed extreme thermal and chemical stability and exhibited high performance.
RESUMEN
Adsorption and reactions of NO on clean and CO-precovered Ir(111) were investigated by means of X-ray photoelectron spectroscopy (XPS), high-resolution electron energy loss spectroscopy (HR-EELS), infrared reflection absorption spectroscopy (IRAS), and temperature-programmed desorption (TPD). Two NO adsorption states, indicative of fcc-hollow sites and atop sites, were present on the Ir(111) surface at saturation coverage. NO adsorbed on hollow sites dissociated to Na and Oa at temperatures above 283 K. The dissociated Na desorbed to form N2 by recombination of Na at 574 K and by a disproportionation reaction between atop-NO and Na at 471 K. Preadsorbed CO inhibited the adsorption of NO on atop sites, whereas adsorption on hollow sites was not affected by the coexistence of CO. The adsorbed CO reacted with dissociated Oa and desorbed as CO2 at 574 K.
RESUMEN
The catalytic activity of Pd/Al2O3 prepared from various palladium precursors for direct NO decomposition is closely related to the fraction of surface step sites capable of dissociating NO, on the basis of a surface science study using single-crystal model catalyst.
RESUMEN
Coexisting SO2 considerably enhanced the catalytic activity of Ir/SiO2 for NO reduction with CO in the presence of O2 because of the formation of a cis-type coordinated species of NO and CO to one iridium atom ([formula: see text]), a possible reaction intermediate leading to N2 formation.