RESUMEN
This paper describes a filled-aperture coherent beam combining (CBC) system based on locking of optical coherence via single-detector electronic-frequency tagging (LOCSET). The sensing and control architecture is implemented using a field-programmable gate array and high-bandwidth electro-optic phase modulators. The all-fiber optical configuration consists of a narrow linewidth 1560 nm seed laser separated into three channels, each containing 7 W erbium-doped fiber amplifiers. The system was demonstrated experimentally, achieving a total stabilized output power of 20 W, a combination efficiency greater than 95%, and an output RMS phase stability of λ/493. As this architecture employs an entirely digital sensing and control scheme based on LOCSET, it presents a highly scalable and cost-effective solution for CBC that is wavelength agnostic and can support an arbitrarily large number of channels.
RESUMEN
Two simple external cavity diode laser designs using fibre pigtailed gain chips are tested and their properties compared with a high end DBR fibre laser. These ECDLs demonstrate a FWHM linewidth as low as 5.2kHz with a fitted Lorentzian FWHM linewidth as low as 1.6kHz. Tuning ranges of 200nm covering 1420nm to 1620nm were demonstrated. To the best of our knowledge these are the narrowest linewidth and most broadly tunable external cavity diode lasers reported to date. The improvement in linewidth is attributed to greatly enhanced acoustic isolation allowed by using fiber coupled gain chips and by replacing kinematic mounts with a pair of rotatable wedges for cavity alignment which eliminates acoustic resonances. A detailed description and discussion of techniques used to characterize the frequency noise and linewidths of these lasers is provided.
RESUMEN
Using cryogenic helium buffer-gas cooling, we have prepared dense samples of atomic lithium and molecular calcium monohydride at temperatures as low as 1 K. We have measured the Li+CaHâLiH+Ca chemical reaction, observed in both the accelerated disappearance of CaH in the presence of high densities of lithium and in the appearance of the LiH molecule.
RESUMEN
Since their development in the late 1980s, cheap, reliable external cavity diode lasers (ECDLs) have replaced complex and expensive traditional dye and Titanium Sapphire lasers as the workhorse laser of atomic physics labs. Their versatility and prolific use throughout atomic physics in applications such as absorption spectroscopy and laser cooling makes it imperative for incoming students to gain a firm practical understanding of these lasers. This publication builds upon the seminal work by Wieman, updating components, and providing a video tutorial. The setup, frequency locking and performance characterization of an ECDL will be described. Discussion of component selection and proper mounting of both diodes and gratings, the factors affecting mode selection within the cavity, proper alignment for optimal external feedback, optics setup for coarse and fine frequency sensitive measurements, a brief overview of laser locking techniques, and laser linewidth measurements are included.