What can we learn from N2 O isotope data? - Analytics, processes and modelling.

The isotopic composition of nitrous oxide (N2 O) provides useful information for evaluating N2 O sources and budgets. Due to the co-occurrence of multiple N2 O transformation pathways, it is, however, challenging to use isotopic information to quantify the contribution of distinct processes across variable spatiotemporal scales. Here, we present an overview of recent progress in N2 O isotopic studies and provide suggestions for future research, mainly focusing on: analytical techniques; production and consumption processes; and interpretation and modelling approaches. Comparing isotope-ratio mass spectrometry (IRMS) with laser absorption spectroscopy (LAS), we conclude that IRMS is a precise technique for laboratory analysis of N2 O isotopes, while LAS is more suitable for in situ/inline studies and offers advantages for site-specific analyses. When reviewing the link between the N2 O isotopic composition and underlying mechanisms/processes, we find that, at the molecular scale, the specific enzymes and mechanisms involved determine isotopic fractionation effects. In contrast, at plot-to-global scales, mixing of N2 O derived from different processes and their isotopic variability must be considered. We also find that dual isotope plots are effective for semi-quantitative attribution of co-occurring N2 O production and reduction processes. More recently, process-based N2 O isotopic models have been developed for natural abundance and 15 N-tracing studies, and have been shown to be effective, particularly for data with adequate temporal resolution. Despite the significant progress made over the last decade, there is still great need and potential for future work, including development of analytical techniques, reference materials and inter-laboratory comparisons, further exploration of N2 O formation and destruction mechanisms, more observations across scales, and design and validation of interpretation and modelling approaches. Synthesizing all these efforts, we are confident that the N2 O isotope community will continue to advance our understanding of N2 O transformation processes in all spheres of the Earth, and in turn to gain improved constraints on regional and global budgets.

Reassessment of the NH4 NO3 thermal decomposition technique for calibration of the N2 O isotopic composition.

RATIONALE: In the last few years, the study of N2 O site-specific nitrogen isotope composition has been established as a powerful technique to disentangle N2 O emission pathways. This trend has been accelerated by significant analytical progress in the field of isotope ratio mass spectrometry (IRMS) and more recently quantum cascade laser absorption spectroscopy (QCLAS). METHODS: The ammonium nitrate (NH4 NO3 ) decomposition technique provides a strategy to scale the 15 N site-specific (SP ≡ Î´15 Nα - δ15 Nß ) and bulk (δ15 Nbulk  = (δ15 Nα  + Î´15 Nß )/2) isotopic composition of N2 O against the international standard for the 15 N/14 N isotope ratio (AIR-N2 ). Within the current project 15 N fractionation effects during thermal decomposition of NH4 NO3 on the N2 O site preference were studied using static and dynamic decomposition techniques. RESULTS: The validity of the NH4 NO3 decomposition technique to link NH4+ and NO3- moiety-specific δ15 N analysis by IRMS to the site-specific nitrogen isotopic composition of N2 O was confirmed. However, the accuracy of this approach for the calibration of δ15 Nα and δ15 Nß values was found to be limited by non-quantitative NH4 NO3 decomposition in combination with substantially different isotope enrichment factors for the conversion of the NO3- or NH4+ nitrogen atom into the α or ß position of the N2 O molecule. CONCLUSIONS: The study reveals that the completeness and reproducibility of the NH4 NO3 decomposition reaction currently confine the anchoring of N2 O site-specific isotopic composition to the international isotope ratio scale AIR-N2 . The authors suggest establishing a set of N2 O isotope reference materials with appropriate site-specific isotopic composition, as community standards, to improve inter-laboratory compatibility. Copyright © 2016 John Wiley & Sons, Ltd.

Development of a spectroscopic technique for continuous online monitoring of oxygen and site-specific nitrogen isotopic composition of atmospheric nitrous oxide.

Nitrous oxide is an important greenhouse gas and ozone-depleting-substance. Its sources are diffuse and poorly characterized, complicating efforts to understand anthropogenic impacts and develop mitigation policies. Online, spectroscopic analysis of N2O isotopic composition can provide continuous measurements at high time resolution, giving new insight into N2O sources, sinks, and chemistry. We present a new preconcentration unit, "Stheno II", coupled to a tunable infrared laser direct absorption spectroscopy (TILDAS) instrument, to measure ambient-level variations in (18)O and site-specific (15)N N2O isotopic composition at remote sites with a temporal resolution of <1 h. Trapping of N2O is quantitative up to a sample size of ∼4 L, with an optimal sample size of 1200-1800 mL at a sampling frequency of 28 min. Line shape variations with the partial pressure of the major matrix gases N2/O2 and CO2 are measured, and show that characterization of both pressure broadening and Dicke narrowing is necessary for an optimal spectral fit. Partial pressure variations of CO2 and bath gas result in a linear isotopic measurement offset of 2.6-6.0 ‰ mbar(-1). Comparison of IR MS and TILDAS measurements shows that the TILDAS technique is accurate and precise, and less susceptible to interferences than IR MS measurements. Two weeks of measurements of N2O isotopic composition from Cambridge, MA, in May 2013 are presented. The measurements show significant short-term variability in N2O isotopic composition larger than the measurement precision, in response to meteorological parameters such as atmospheric pressure and temperature.

High-precision measurements of (33)S and (34)S fractionation during SO2 oxidation reveal causes of seasonality in SO2 and sulfate isotopic composition.

This study presents high-precision isotope ratio-mass spectrometric measurements of isotopic fractionation during oxidation of SO2 by OH radicals in the gas phase and H2O2 and transition metal ion catalysis (TMI-catalysis) in the aqueous phase. Although temperature dependence of fractionation factors was found to be significant for H2O2 and TMI-catalyzed pathways, results from a simple 1D model revealed that changing partitioning between oxidation pathways was the dominant cause of seasonality in the isotopic composition of sulfate relative to SO2. Comparison of modeled seasonality with observations shows the TMI-catalyzed oxidation pathway is underestimated by more than an order of magnitude in all current atmospheric chemistry models. The three reactions showed an approximately mass-dependent relationship between (33)S and (34)S. However, the slope of the mass-dependent line was significantly different to 0.515 for the OH and TMI-catalyzed pathways, reflecting kinetic versus equilibrium control of isotopic fractionation. For the TMI-catalyzed pathway, both temperature dependence and (33)S/(34)S relationship revealed a shift in the rate-limiting reaction step from dissolution at lower temperatures to TMI-sulfite complex formation at higher temperatures. 1D model results showed that although individual reactions could produce Δ(33)S values between -0.15 and +0.2‰, seasonal changes in partitioning between oxidation pathways caused average sulfate Δ(33)S values of 0‰ throughout the year.

Land-use and abandonment alters methane and nitrous oxide fluxes in mountain grasslands.

Grasslands cover more than one fifth of total land area in Europe and contribute significantly to the total greenhouse gas budget. The impact of management and land use on the carbon cycle and carbon sequestration in grasslands has been well-studied, however effects on emissions of N2O and CH4 remain uncertain. Additionally, the majority of studies have focussed on management differences between intensively managed grasslands, with few results available for lightly managed grasslands and in particular grassland abandonment. We present N2O and CH4 flux measurements for an abandonment trajectory at low land-use intensity, comparing meadow (fertilized and cut), pasture (grazed) and abandoned (unmanaged since 1983) grassland sites located in the Austrian Alps. Mean growing season N2O fluxes were 0.07, 0.07 and - 0.13 nmol m-2 s-1 and CH4 fluxes were - 1.0, - 0.5 and - 1.6 nmol m-2 s-1 for the meadow, pasture and abandoned sites respectively. Variability for both gases at the abandoned site was dominated by 'hot moments', while 'hot spots' dominated at the managed meadow and pasture sites. Consideration of the diurnal cycle observed at the abandoned site, linear correlations within all data sets, and principal components analyses of the full data set revealed increased consumption of both N2O and CH4 with increasing temperature, but hardly any relationship between fluxes and soil moisture. Upscaled over a year, the observed fluxes correspond to enhanced non-CO2 greenhouse gas uptake of 172 g CO2-equiv. m-2 y-1 following abandonment. These results show that non-CO2 greenhouse gases form an important part of the total climate impact of land use change and grassland abandonment, such that abandoned grassland is a net sink for both CH4 and N2O.

Development of a field-deployable method for simultaneous, real-time measurements of the four most abundant N2O isotopocules.

Understanding and quantifying the biogeochemical cycle of N2O is essential to develop effective N2O emission mitigation strategies. This study presents a novel, fully automated measurement technique that allows simultaneous, high-precision quantification of the four main N2O isotopocules (14N14N16O, 14N15N16O, 15N14N16O and 14N14N18O) in ambient air. The instrumentation consists of a trace gas extractor (TREX) coupled to a quantum cascade laser absorption spectrometer, designed for autonomous operation at remote measurement sites. The main advantages this system has over its predecessors are a compact spectrometer design with improved temperature control and a more compact and powerful TREX device. The adopted TREX device enhances the flexibility of the preconcentration technique for higher adsorption volumes to target rare isotope species and lower adsorption temperatures for highly volatile substances. All system components have been integrated into a standardized instrument rack to improve portability and accessibility for maintenance. With an average sampling frequency of approximately 1 h-1, this instrumentation achieves a repeatability of 0.09, 0.13, 0.17 and 0.12 ‰ for δ15Nα, δ15Nß, δ18O and site preference of N2O, respectively, for pressurized ambient air. The repeatability for N2O mole fraction measurements is better than 1 ppb (parts per billion, 10-9 moles per mole of dry air).

Nitrous oxide and methane emissions and nitrous oxide isotopic composition from waste incineration in Switzerland.

Solid waste incineration accounts for a growing proportion of waste disposal in both developed and developing countries, therefore it is important to constrain emissions of greenhouse gases from these facilities. At five Swiss waste incineration facilities with grate firing, emission factors for N2O and CH4 were determined based on measurements of representative flue gas samples, which were collected in Tedlar bags over a one year period (September 2010-August 2011) and analysed with FTIR spectroscopy. All five plants burn a mixture of household and industrial waste, and two of the plants employ NOx removal through selective non-catalytic reduction (SNCR) while three plants use selective catalytic reduction (SCR) for NOx removal. N2O emissions from incineration plants with NOx removal through selective catalytic reduction were 4.3 ± 4.0g N2O tonne(-1) waste (wet) (hereafter abbreviated as t(-1)) (0.4 ± 0.4 g N2O GJ(-1)), ten times lower than from plants with selective non-catalytic reduction (51.5 ± 10.6g N2O t(-1); 4.5 ± 0.9g N2O GJ(-1)). These emission factors, which are much lower than the value of 120g N2O t(-1) (10.4g N2O GJ(-1)) used in the 2013 Swiss national greenhouse gas emission inventory, have been implemented in the most recent Swiss emission inventory. In addition, the isotopic composition of N2O emitted from the two plants with SNCR, which had considerable N2O emissions, was measured using quantum cascade laser spectroscopy. The isotopic site preference of N2O - the enrichment of (14)N(15)NO relative to (15)N(14)NO - was found to be 17.6 ± 0.8‰, with no significant difference between the two plants. Comparison to previous studies suggests SP of 17-19‰ may be characteristic for N2O produced from SNCR. Methane emissions were found to be insignificant, with a maximum emission factor of 2.5 ± 5.6g CH4 t(-1) (0.2 ± 0.5g CH4 GJ(-1)), which is expected due to high incinerator temperatures and efficient combustion.

Isotopic evidence for nitrous oxide production pathways in a partial nitritation-anammox reactor.

Nitrous oxide (N2O) production pathways in a single stage, continuously fed partial nitritation-anammox reactor were investigated using online isotopic analysis of offgas N2O with quantum cascade laser absorption spectroscopy (QCLAS). N2O emissions increased when reactor operating conditions were not optimal, for example, high dissolved oxygen concentration. SP measurements indicated that the increase in N2O was due to enhanced nitrifier denitrification, generally related to nitrite build-up in the reactor. The results of this study confirm that process control via online N2O monitoring is an ideal method to detect imbalances in reactor operation and regulate aeration, to ensure optimal reactor conditions and minimise N2O emissions. Under normal operating conditions, the N2O isotopic site preference (SP) was much higher than expected - up to 40‰ - which could not be explained within the current understanding of N2O production pathways. Various targeted experiments were conducted to investigate the characteristics of N2O formation in the reactor. The high SP measurements during both normal operating and experimental conditions could potentially be explained by a number of hypotheses: i) unexpectedly strong heterotrophic N2O reduction, ii) unknown inorganic or anammox-associated N2O production pathway, iii) previous underestimation of SP fractionation during N2O production from NH2OH, or strong variations in SP from this pathway depending on reactor conditions. The second hypothesis - an unknown or incompletely characterised production pathway - was most consistent with results, however the other possibilities cannot be discounted. Further experiments are needed to distinguish between these hypotheses and fully resolve N2O production pathways in PN-anammox systems.

Enhanced role of transition metal ion catalysis during in-cloud oxidation of SO2.

Global sulfate production plays a key role in aerosol radiative forcing; more than half of this production occurs in clouds. We found that sulfur dioxide oxidation catalyzed by natural transition metal ions is the dominant in-cloud oxidation pathway. The pathway was observed to occur primarily on coarse mineral dust, so the sulfate produced will have a short lifetime and little direct or indirect climatic effect. Taking this into account will lead to large changes in estimates of the magnitude and spatial distribution of aerosol forcing. Therefore, this oxidation pathway-which is currently included in only one of the 12 major global climate models-will have a significant impact on assessments of current and future climate.