Mercury-bearing wastes: Sources, policies and treatment technologies for mercury recovery and safe disposal.

Due to the lenient environmental policies in developing economies, mercury-containing wastes are partly produced as a result of the employment of mercury in manufacturing and consumer products. Worldwide, the presence of mercury as an impurity in several industrial processes leads to significant amounts of contaminated waste. The Minamata Convention on Mercury dictates that mercury-containing wastes should be handled in an environmentally sound way according to the Basel Convention Technical Guidelines. Nevertheless, the management policies differ a great deal from one country to another because only a few deploy or can afford to deploy the required technology and facilities. In general, elemental mercury and mercury-bearing wastes should be stabilized and solidified before they are disposed of or permanently stored in specially engineered landfills and facilities, respectively. Prior to physicochemical treatment and depending on mercury's concentration, the contaminated waste may be thermally or chemically processed to reduce mercury's content to an acceptable level. The suitability of the treated waste for final disposal is then assessed by the application of standard leaching tests whose capacity to evaluate its long-term behavior is rather questionable. This review critically discusses the main methods employed for the recovery of mercury and the treatment of contaminated waste by analyzing representative examples from the industry. Furthermore, it gives a complete overview of all relevant issues by presenting the sources of mercury-bearing wastes, explaining the problems associated with the operation of conventional discharging facilities and providing an insight of the disposal policies adopted in selected geographical regions.

CeO2-Decorated ?-MnO2 Nanotubes: A Highly Efficient and Regenerable Sorbent for Elemental Mercury Removal from Natural Gas.

CeO2 nanoparticle-decorated ?-MnO2 nanotubes (NTs) were prepared and tested for elemental mercury (Hg0) vapor removal in simulated natural gas mixtures at ambient conditions. The composition which had the largest surface area and a relative Ce/Mn atomic weight ratio of around 35% exhibited a maximum Hg0 uptake capacity exceeding 20 mg?g?1 (2 wt %), as determined from measurements of mercury breakthrough which corresponded to 99.5% Hg0 removal efficiency over 96 h of exposure. This represents a significant improvement in the activity of pure metal oxides. Most importantly, the composite nanosorbent was repeatedly regenerated at 350 ?C and retained the 0.5% Hg0 breakthrough threshold. It was projected to be able to sustain 20 regeneration cycles, with the presence of acid gases, CO2, and H2S, not affecting its performance. This result is particularly important, considering that pure CeO2 manifests rather poor activity for Hg0 removal at ambient conditions, and hence, a synergistic effect in the composite nanomaterial was observed. This possibly results from the addition of facile oxygen vacancy formation at ?-MnO2 NTs and the increased amount of surface-adsorbed oxygen species.

Biomimetic topography and chemistry control cell attachment to amyloid fibrils.

Networks of nanoscale fibrous coatings made from self-assembled peptides are promising candidates for biomaterials that can promote the growth of mammalian cells. One particularly attractive feature is the possibility of adding biofunctional sequences to peptides to promote cell attachment. We deconvolute the topographic and chemical effects of nanoscale fibrils on cells by depositing a plasma polymer film on TTR1-based fibrils decorated with a range of cell adhesive chemistries (RGD and cycloRGDfK), producing a surface that retains the nanoscale fibrous topography of surface-bound fibrils but lacks the fibril surface chemistry. The surface topography was found to influence cell toxicity and spreading, and the fibril surface chemistry influenced cell attachment and spreading. This study highlights the importance of considering both the chemical and physical features of novel biomaterials and illustrates the use of plasma polymer deposition as a tool for examining the relationship between amyloid fibril structure and function.

Enhancing thermal stability and mechanical properties of lyotropic liquid crystals through incorporation of a polymerizable surfactant.

We present a facile method to prepare thermally stable and mechanically robust crosslinked lyotropic liquid crystals (LLCs) through incorporation of a polymerizable amphiphile into a binary LLC system comprising commercially available surfactant Brij 97 and water. Thermal stability and mechanical properties of the polymerized LLCs were significantly enhanced after polymerization of the incorporated polymerizable surfactant. The effect of incorporating a polymerizable amphiphile on the phase behavior of the LLC system was studied in detail. In situ photo-rheology was used to monitor the change in the mechanical properties of the LLCs, namely the storage modulus, loss modulus, and viscosity, upon polymerization. The retention of the LLC nanostructures was evaluated by small angle X-ray scattering (SAXS). The ability to control the thermal stability and mechanical strength of LLCs simply by adding a polymerizable amphiphile, without tedious organic synthesis or harsh polymerization conditions, could prove highly advantageous in the preparation of robust nanomaterials with well-defined periodic structures.

Reversible photorheological lyotropic liquid crystals.

We describe novel lyotropic liquid-crystalline (LLC) materials based on photoresponsive amphiphiles that exhibit rapid photoswitchable rheological properties of unprecedented magnitude between solidlike and liquidlike states. This was achieved through the synthesis of a novel azobenzene-containing surfactant (azo-surfactant) that actuates the transition between different LLC forms depending on illumination conditions. Initially, the azo-surfactant/water mixtures formed highly ordered and viscous LLC phases at 20-55 wt % water content. Spectroscopic, microscopic, and rheological analysis confirmed that UV irradiation induced the trans to cis isomerization of the azo-surfactant, leading to the disruption of the ordered LLC phases and a dramatic, rapid decrease in the viscosity and modulus resulting in a 3 orders of magnitude change from a solid (20,000 Pa) to a liquid (50 Pa) at rate of 13,500 Pa/s. Subsequent exposure to visible light reverses the transition, returning the viscosity essentially to its initial state. Such large, rapid, and reversible changes in rheological properties within this LLC system may open a door to new applications for photorheological fluids.

Engineered lysozyme amyloid fibril networks support cellular growth and spreading.

Fibrous networks assembled from synthetic peptides are promising candidates for biomimetic cell culture platforms and implantable biomaterials. The ability of the materials to reproduce physiological cell-matrix interactions is essential. However, the synthetic complexity of such systems limits their applications, thus alternative materials are desirable. Here, we design lysozyme derived amyloid fibril networks with controllable topographies, and perform a comprehensive study of the response of cultured fibroblast and epithelial cells. At high surface coverage a favorable increase in spreading and the generation of focal adhesions was observed, due to a combination of biomimetic chemistry and morphology. Their ease of synthesis, makes the nanoscale fibrils presented here ideal materials for future clinical applications whereby large volumes of biomimetic biomaterials are required. Furthermore, the surface chemistry of the fibrils is sufficient for the promotion of focal adhesions with cultured cells, eliminating the need for complex protocols for fibril decoration with bioactive moieties.

Nanofibrillar micelles and entrapped vesicles from biodegradable block copolymer/polyelectrolyte complexes in aqueous media.

Here we report a viable route to fibrillar micelles and entrapped vesicles in aqueous solutions. Nanofibrillar micelles and entrapped vesicles were prepared from complexes of a biodegradable block copolymer poly(ethylene oxide)-block-poly(lactide) (PEO-b-PLA) and a polyelectrolyte poly(acrylic acid) (PAA) in aqueous media and directly visualized using cryogenic transmission electron microscopy (cryo-TEM). The self-assembly and the morphological changes in the complexes were induced by the addition of PAA/water solution into the PEO-b-PLA in tetrahydrofuran followed by dialysis against water. A variety of morphologies including spherical wormlike and fibrillar micelles, and both unilamellar and entrapped vesicles, were observed, depending on the composition, complementary binding sites of PAA and PEO, and the change in the interfacial energy. Increasing the water content in each [AA]/[EO] ratio led to a morphological transition from spheres to vesicles, displaying both the composition- and dilution-dependent micellar-to-vesicular morphological transitions.

Nanotopographic surfaces with defined surface chemistries from amyloid fibril networks can control cell attachment.

We show for the first time the possibility of using networks of amyloid fibrils, adsorbed to solid supports and with plasma polymer coatings, for the fabrication of chemically homogeneous surfaces with well-defined nanoscale surface features reminiscent of the topography of the extracellular matrix. The robust nature of the fibrils allows them to withstand the plasma polymer deposition conditions used with no obvious deleterious effect, thus enabling the underlying fibril topography to be replicated at the polymer surface. This effect was seen despite the polymer coating thickness being an order of magnitude greater than the fibril network. The in vitro culture of fibroblast cells on these surfaces resulted in increased attachment and spreading compared to flat plasma polymer films with the same chemical composition. The demonstrated technique allows for the rapid and reproducible fabrication of substrates with nanoscale fibrous topography that we believe will have applications in the development of new biomaterials allowing, for example, the investigation of the effect of extracellular matrix mimicking nanoscale morphology on cellular phenotype.

Coronavirus disease 2019 (COVID-19) among nonphysician healthcare personnel by work location at a tertiary-care center, Iowa, 2020-2021.

We describe COVID-19 cases among nonphysician healthcare personnel (HCP) by work location. The proportion of HCP with coronavirus disease 2019 (COVID-19) was highest in the emergency department and lowest among those working remotely. COVID-19 and non-COVID-19 units had similar proportions of HCP with COVID-19 (13%). Cases decreased across all work locations following COVID-19 vaccination.

Glycerol monooleate-based nanocarriers for siRNA delivery in vitro.

We present studies of the delivery of short interfering ribonucleic acid (siRNA) into a green fluorescent protein (GFP) expressing cell line, using lipid nanocarriers in cubic lyotropic liquid crystal form. These carriers are based on glycerol monooleate (GMO) and employ the use of varying concentrations of cationic siRNA binding lipids. The essential physicochemical parameters of the cationic lipid/GMO/siRNA complexes such as particle size, ζ otential, siRNA uptake stability, lyotropic mesophase behavior, cytotoxicity,and gene silencing efficiency were systematically assessed. We find that the lipid nanocarriers were effectively taken up by mammalian cells and that their siRNA payload was able to induce gene silencing in vitro. More importantly, it was found that the nonlamellar structure of some of the lipid nanocarrier formulations were more effective at gene silencing than their lamellar structured counterparts. The development of cationic lipid functionalized nonlamellar GMO-based nanostructured nanoparticles may lead to improved siRNA delivery vehicles.

Surface immobilization of bio-functionalized cubosomes: sensing of proteins by quartz crystal microbalance.

A strategy for tethering lipid liquid crystalline submicrometer particles (cubosomes) to a gold surface for the detection of proteins is reported. Time-resolved quartz crystal microbalance (QCM-D) was used to monitor the cubosome-protein interaction in real time. To achieve specific binding, cubosomes were prepared from the nonionic surfactant phytantriol, block-copolymer, Pluronic F-127, and a secondary biotinylated lipid, 1,2-distearoyl-sn-glycero-3-phosphoethanolamine-N-[biotinyl(polyethyleneglycol)-2000], which enabled attachment of the particles to a neutravidin (NAv)-alkanethiol monolayer at the gold surface of the QCM sensor chip. A second set of cubosomes was further functionalized with addition of the glycolipid (G(M1)) to facilitate a specific binding uptake of the protein, cholera toxin B subunit (CT(B)), from solution. QCM-D confirmed the specificity of the cubosome-NAv binding. The analysis of titration experiments, also performed with QCM, suggests that an optimal concentration of cubosomes is required for the efficient packing of the particles at the surface: high cubosome concentrations lead to chaotic cubosome binding onto the surface, sterically inhibiting surface attachment, or require significant reorganization to permit uniform cubosome coverage. The methodology enabled the straightforward preparation of a complex nanostructured edifice, which was then used to specifically capture analyte proteins (cholera toxin B subunit or free NAv) from solution, supporting the potential for development of this approach as a biosensing platform.

A simple and effective approach to vesicles and large compound vesicles via complexation of amphiphilic block copolymer with polyelectrolyte in water.

This work reports for the first time a simple and effective approach to trigger a spheres-to- vesicles morphological transition from amphiphilic block copolymer/polyelectrolyte complexes in aqueous solution. Vesicles and large compound vesicles (LCVs) were prepared via complexation of polystyrene-block-poly(ethylene oxide) (PS-b-PEO) with poly(acrylic acid) (PAA) in water and directly visualized using cryo-TEM. The complexation and morphological transitions were driven by the hydrogen bonding between the complementary binding sites on the PAA and PEO blocks of the block copolymer. The findings in this work suggest that complexation between amphiphilic block copolymer and polyelectrolyte is a viable approach to vesicles and LCVs in aqueous media.

Association between job role and coronavirus disease 2019 (COVID-19) among healthcare personnel, Iowa, 2021.

We describe the association between job roles and coronavirus disease 2019 (COVID-19) among healthcare personnel. A wide range of hazard ratios were observed across job roles. Medical assistants had higher hazard ratios than nurses, while attending physicians, food service workers, laboratory technicians, pharmacists, residents and fellows, and temporary workers had lower hazard ratios.

Risk of beryllium sensitization in a low-exposed former nuclear weapons cohort from the Cold War era.

BACKGROUND: The nuclear weapons industry has long been known as a source of beryllium exposure. METHODS: A total of 1,004 former workers from a nuclear weapons assembly site in the Midwest were screened for sensitization to beryllium (BeS). The screenings were part of the Department of Energy (DOE) Former Worker Program established in 1996. RESULTS: Twenty-three (2.3%) workers were found sensitized to beryllium and this prevalence was comparable to other DOE sites. Occasional, direct exposure to beryllium through machining and grinding of copper-beryllium (Cu-Be) 2% alloy tools was found to increase the risk of sensitization compared to background exposure (OR = 3.83; 95% CI: 1.04-14.03) with a statistically significant trend (P = 0.03) revealing that particular jobs are associated with sensitization. Exposure potential in this study was estimated based on job titles and not personal exposure information. CONCLUSIONS: These results confirm the need to screen workers using beryllium alloy tools in other industries and for consideration of altering work practices.

Mercury in natural gas streams: A review of materials and processes for abatement and remediation.

The role of natural gas in mitigating greenhouse gas emissions and advancing renewable energy resource integration is undoubtedly critical. With the progress of hydrocarbons exploration and production, the target zones become deeper and the possibility of mercury contamination increases. This impacts on the industry from health and safety risks, due to corrosion and contamination of equipment, to catalyst poisoning and toxicity through emissions to the environment. Especially mercury embrittlement, being a significant problem in LNG plants using aluminum cryogenic heat exchangers, has led to catastrophic plant incidents worldwide. The aim of this review is to critically discuss the conventional and alternative materials as well as the processes employed for mercury removal during gas processing. Moreover, comments on studies examining the geological occurrence of mercury species are included, the latest developments regarding the detection, sampling and measurement are presented and updated information with respect to mercury speciation and solubility is displayed. Clean up and passivation techniques as well as disposal methods for mercury-containing waste are also explained. Most importantly, the environmental as well as the health and safety implications are addressed, and areas that require further research are pinpointed.

Atomic force microscopy investigation of the morphology and topography of colistin-heteroresistant Acinetobacter baumannii strains as a function of growth phase and in response to colistin treatment.

The prevalence of infections caused by multidrug-resistant gram-negative Acinetobacter baumannii strains and the lack of novel antibiotics under development are posing a global dilemma, forcing a resurgence of the last-line antibiotic colistin. Our aim was to use atomic force microscopy (AFM) to investigate the morphology and topography of paired colistin-susceptible and -resistant cells from colistin-heteroresistant A. baumannii strains as a function of bacterial growth phase and colistin exposure. An optimal AFM bacterial sample preparation protocol was established and applied to examine three paired strains. Images revealed rod-shaped colistin-susceptible cells (1.65 +/- 0.27 microm by 0.98 +/- 0.07 microm) at mid-logarithmic phase, in contrast to spherical colistin-resistant cells (1.03 +/- 0.09 microm); the latter were also more diverse in appearance and exhibited a rougher surface topography (7.05 +/- 1.3 nm versus 11.4 +/- 2.5 nm for susceptible versus resistant, respectively). Cellular elongation up to approximately 18 microm at stationary phase was more commonly observed in susceptible strains, although these "worm-like" cells were also observed occasionally in the resistant population. The effects of colistin exposure on the cell surface of colistin-susceptible and -resistant cells were found to be similar; topographical changes were minor in response to 0.5 microg/ml colistin; however, at 4 microg/ml colistin, a significant degree of surface disruption was detected. At 32 microg/ml colistin, cellular clumping and surface smoothening were evident. Our study has demonstrated for the first time substantial morphological and topographical differences between colistin-susceptible and -resistant cells from heteroresistant A. baumannii strains. These results contribute to an understanding of colistin action and resistance in regard to this problematic pathogen.

Diversifying the solid state and lyotropic phase behavior of nonionic urea-based surfactants.

The solid state and lyotropic phase behavior of 10 new nonionic urea-based surfactants has been characterized. The strong homo-urea interaction, which can prevent urea surfactants from forming lyotropic liquid crystalline phases, has been ameliorated through the use of isoprenoid hydrocarbon tails such as phytanyl (3,7,11,15-tetramethyl-hexadecyl) and hexahydrofarnesyl (3,7,11-trimethyl-dodecyl) or the oleyl chain (cis-octadec-9-enyl). Additionally, the urea head group was modified by attaching either a hydroxy alkyl (short chain alcohol) moiety to one of the nitrogens of the urea or by effectively "doubling" the urea head group by replacing it with a biuret head group. The solid state phase behavior, including the liquid crystal-isotropic liquid, polymorphic, and glass transitions, is interpreted in terms of molecular geometries and probable hydrogen-bonding interactions. Four of the modified urea surfactants displayed ordered lyotropic liquid crystalline phases that were stable in excess water at both room and physiological temperatures, namely, 1-(2-hydroxyethyl)-1-oleyl urea (oleyl 1,1-HEU) with a 1D lamellar phase (Lalpha), 1-(2-hydroxyethyl)-3-phytanyl urea (Phyt 1,3-HEU) with a 2D inverse hexagonal phase (HII), and 1-(2-hydroxyethyl)-1-phytanyl urea (Phyt 1,1-HEU) and 1-(2-hydroxyethyl)-3-hexahydrofarnesyl urea (Hfarn 1,3-HEU) with a 3D bicontinuous cubic phase (QII). Phyt 1,1-HEU exhibited rich mesomorphism (QII1, QII2, Lalpha, LU, and HII), as did one other surfactant, oleyl 1,3-HEU (QII1, QII2, Lalpha, LU, and HII), in the study group. LU is an unusual phase which is mobile and isotropic but possesses shear birefringence, and has been very tentatively assigned as an inverse sponge phase. Three other surfactants exhibited a single lyotropic liquid crystalline phase, either Lalpha or HII, at temperatures >50 degrees C. The 10 new surfactants are compared with other recently reported nonionic urea surfactants. Structure-property correlations are examined for this novel group of self-assembling amphiphiles.

Two-dimensional patterning of thin coatings for the control of tissue outgrowth.

Control of the precise location and extent of cellular attachment and proliferation, and of tissue outgrowth is important in a number of biomedical applications, including biomaterials and tissue engineered medical devices. Here we describe a method to control and direct the location and define boundaries of tissue growth on surfaces in two dimensions. The method relies on the generation of a spatially defined surface chemistry comprising protein adsorbing and non-adsorbing areas that allow control over the adsorption of cell-adhesive glycoproteins. Surface modification was carried out by deposition of thin acetaldehyde and allylamine plasma polymer coatings on silicon wafer and FEP substrates, followed by grafting of a protein resistant layer of poly(ethylene oxide). Spatially controlled patterning of the surface chemistry was achieved by masking during plasma polymerization. XPS and AFM were used to provide evidence of successful surface modifications. Adsorption of the extracellular matrix protein collagen I followed by tissue outgrowth experiments with bovine corneal epithelial tissue for up to 21 days showed that two-dimensional control over tissue outgrowth is achievable with our patterning method over extended time frames. The method promises to be an effective tool for use in a number of in vitro and in vivo applications.

Controlling the Mesostructure Formation within the Shell of Novel Cubic/Hexagonal Phase Cetyltrimethylammonium Bromide-Poly(acrylamide-acrylic acid) Capsules for pH Stimulated Release.

The self-assembly of ordered structures in mixtures of oppositely charged surfactant and polymer systems has been exploited in various cleaning and pharmaceutical applications and continue to attract much interest since their discovery in the late twentieth century. The ability to control the electrostatic and hydrophobic interactions that dictate the formation of liquid crystalline phases in these systems is advantageous in manipulation of structure and rendering them responsive to external stimuli. Nanostructured capsules comprised of the cationic surfactant, cetyltrimethylammonium bromide (CTAB), and the diblock copolymer poly(acrylamide-acrylic acid) (PAAm-AA) were prepared to assess their potential as pH responsive nanomaterials. Crossed-polarizing light microscopy (CPLM) and small-angle X-ray scattering (SAXS) identified coexisting Pm3n cubic and hexagonal phases at the surfactant-polymer interface. The hydrophobic and electrostatic interactions between the oppositely charged components were studied by varying temperature and solution pH, respectively, and were found to influence the liquid crystalline nanostructure formed. The lattice parameter of the mesophases and the fraction of cubic phase in the system decreased upon heating. Acidic conditions resulted in the loss of the highly ordered structures due to protonation of the carboxylic acid group, and subsequent reduction of attractive forces previously present between the oppositely charged molecules. The rate of release of the model hydrophilic drug, Rhodamine B (RhB), from nanostructured macro-sized capsules significantly increased when the pH of the solution was adjusted from pH 7 to pH 2. This allowed for immediate release of the compound of interest "on demand", opening new options for structured materials with increased functionality over typical layer-by-layer capsules.