Appraisal of the pharmacokinetic profile, histopathology and stability studies of a fast dissolving oral film based on natural polysaccharide.

The present research is designed to evaluate the pharmacokinetic profile, histological evaluation, and stability studies of an orodispersible film (ODF) of tizanidine (TZ) and meloxicam (MX) prepared from a natural polysaccharide, i.e., xanthan gum. In vivo release study of TZ and MX was performed in rabbits and results indicated the better pharmacokinetics parameters and improved the oral bioavailability when compared to the oral aqueous suspension and solution of TZ and MX, respectively. The intermediate stability studies were performed at 30±2°C and 65±5% RH, whereas, the accelerated stability studies were carried out at 40±2°C and 75±5% RH, respectively for the duration of six months and results indicated that the ODF was stable for six months without any substantial difference in essential physico-chemical parameters, mechanical attributes, and morphological constraints. The toxicity profile of ODF was determined through histopathology of vital organs after administering the ODF to the rabbits. Histopathology revealed that the tissues of all vital organs are normal and did not exhibit any abnormalities, lesions, or hemorrhage. Therefore, the ODF prepared from xanthan gum exhibited a non-toxic and stable formulation with a better pharmacokinetics profile of MX and TZ.

Stimuli-responsive/smart tablet formulations (under simulated physiological conditions) for oral drug delivery system based on glucuronoxylan polysaccharide.

Objective: Development of stimuli-responsive intelligent drug delivery system (based on a polysaccharide, glucuronoxylan [GX]) with on-off switching properties under physiological conditions.Significance: As GX exhibits high swelling index and stimuli-responsive swelling/de-swelling properties, therefore, this material appeared highly useful to design pH, solvent and ionic stress-sensitive oral tablet formulations, which offered on-off switching properties. In this way, we could design intelligent/smart drug delivery systems for levosulpiride (LS) and theophylline (TF) with valuable pharmaceutical properties.Methods: GX-based tablet formulations were explored for stimuli-responsive, reversible swelling-deswelling behavior, dynamic swelling, and its kinetics. Tablet surface and channeling after swelling were observed using scanning electron microscopy (SEM). Drug release study was performed mimicking the physiological conditions like pH and transit time of gastrointestinal tract (GIT). Radiographic images of tablet path (in vivo) were recorded.Results: GX-based formulations exhibited high swelling in deionized water (DW), pH 6.8 and 7.4 while negligible swelling at pH 1.2. SEM images discovered the presence of microcracks and nanopores on the surface of tablets and showed channeling after swelling of tablets in DW. Sustained drug release was observed and found directly proportional to the concentration of GX in the formulations with negligible release at pH 1.2. In vivo radiographic evaluation indicated the retention of tablets in GIT for 7 h. Hemocompatibility studies showed the non-thrombogenic and non-hemolytic nature of GX.Conclusions: GX-based smart/stimuli-responsive formulations can control/sustain the release of drugs in GIT.

Linseed hydrogel based floating drug delivery system for fluoroquinolone antibiotics: Design, in vitro drug release and in vivo real-time floating detection.

Herein, we designed a novel gastroretentive drug delivery system as floating matrix tablets based on a polysaccharide material from linseeds (Linum usitatissimum L.) for fluoroquinolone antibiotics. A number of formulations were designed with a combination of linseed hydrogel (LSH) and different excipients to obtain a desired sustained release profile of moxifloxacin. The drug release study was performed basically at pH 1.2. However, the tablet may pass through the stomach to intestine due to certain reasons then it also offered sustained drug release at intestinal pH 4.5, 6.8 and 7.4, as well. Results indicated that sustained moxifloxacin release was directly proportional to the concentration of LSH and the release of drug followed non-Fickian diffusion. SEM of the tablets indicated porous nature of LSH with elongated channels which contributed to the swelling of the tablet and then facilitated the discharge of moxifloxacin from the core of the tablet. In vivo X-ray study was performed to assess disintegration and real-time floating of tablet that confirmed its presence for 6 h in the stomach. These findings indicated that LSH can be used to develop novel gastroretentive sustained release drug delivery systems with the double advantage of sustained drug release at all pH of GIT.

Evaluation of superabsorbent linseed-polysaccharides as a novel stimuli-responsive oral sustained release drug delivery system.

CONTEXT: Advancement in technology has transformed the conventional dosage forms to intelligent drug delivery systems. Such systems are helpful for targeted and efficient drug delivery with minimum side effects. Drug release from these systems is governed and controlled by external stimuli (pH, enzymes, ions, glucose, etc.). Polymeric biomaterial having stimuli-responsive properties has opened a new area in drug delivery approach. OBJECTIVE: Potential of a polysaccharide (rhamnogalacturonan)-based hydrogel from Linseeds (Linum usitatissimum L.) was investigated as an intelligent drug delivery material. MATERIALS AND METHODS: Different concentrations of Linseed hydrogel (LSH) were used to prepare caffeine and diacerein tablets and further investigated for pH and salt solution-responsive swelling, pH-dependent drug release, and release kinetics. Morphology of tablets was observed using SEM. RESULTS: LSH tablets exhibited dynamic swelling-deswelling behavior with tendency to swell at pH 7.4 and in deionized water while deswell at pH 1.2, in normal saline and ethanol. Consequently, pH controlled release of the drugs was observed from tablets with lower release (<10%) at pH 1.2 and higher release at pH 6.8 and 7.4. SEM showed elongated channels in swollen then freeze-dried tablets. DISCUSSION: The drug release was greatly influenced by the amount of LSH in the tablets. Drug release from LSH tablets was governed by the non-Fickian diffusion. CONCLUSIONS: These finding indicates that LSH holds potential to be developed as sustained release material for tablet.

Flaxseed (Linum usitatissimum) mucilage: A versatile stimuli-responsive functional biomaterial for pharmaceuticals and healthcare.

The present review is novel as it discusses the main findings of researchers on the topic and their implications, as well as highlights the emerging research in this particular area and its future prospective. The seeds of Flax (Linum usitatissimum) extrude mucilage (FSM) that has a diverse and wide range of applications, especially in the food industry and as a pharmaceutical ingredient. FSM has been blended with several food and dairy products to improve gelling ability, optical properties, taste, and user compliance. The FSM is recognized as a foaming, encapsulating, emulsifying, suspending, film-forming, and gelling agent for several pharmaceutical preparations and healthcare materials. Owing to stimuli (pH) -responsive swelling-deswelling characteristics, high swelling indices at different physiological pHs of the human body, and biocompatibility, FSM is considered a smart material for intelligent, targeted, and controlled drug delivery applications through conventional and advanced drug delivery systems. FSM has been modified through carboxymethylation, acetylation, copolymerization, and electrostatic complexation to get the desired properties for pharma, food, and healthcare products. The present review is therefore devoted to the isolation techniques, structural characterization, highly valuable properties for food and pharmaceutical industries, preclinical and clinical trials, pharmacological aspects, biomedical attributes, and patents of FSM.

Citric acid cross-linking of a hydrogel from Aloe vera (Aloe barbadensis M.) engenders a pH-responsive, superporous, and smart material for drug delivery.

The current research work is based on the evaluation of a citric acid (CA) cross-linked Aloe vera (Aloe barbadensis M.) leaf hydrogel (CL-ALH) for pH-dependent and sustained drug release application. The CA was used in different concentrations (1.25, 2.5, 5.0, and 10.0%) to cross-link the ALH using homogenous reaction conditions. The synthesis of CL-ALH was confirmed through Fourier transform and nuclear magnetic resonance spectroscopic studies. The thermal analysis indicated that the ALH and CL-ALH were stable and decomposed in two steps. The scanning electron microscopic images of CL-ALH confirmed its porous nature due to the presence of interconnected channeling. The swelling of CL-ALH was evaluated at pH 1.2, 6.8, and 7.4 as well as in deionized water (DW). High swelling of CL-ALH was observed in DW, and at pH 7.4 and 6.8 whereas, less swelling of CL-ALH was witnessed at pH 1.2. CL-ALH also exhibited swelling/deswelling behavior in DW and ethanol, DW and normal saline, and at pH 7.4 and 1.2. Tablets were prepared from CL-ALH as a release retarding agent demonstrating the sustained release of venlafaxine hydrochloride (VFX) for 8 h. Whereas, VFX was released within 4 h from the ALH-based tablet formulation (un-cross-linked material) indicating the prolonged and sustained release behavior of CL-ALH. The VFX was released from CL-ALH tablets and followed zero-order kinetics. The mechanism followed by VFX release from CL-ALH tablets was non-Fickian diffusion. The in vivo fate of the tablet formulation was observed through an X-ray study. The CL-ALH-based tablet safely passed through the stomach of a stray dog without any significant erosion and then disintegrated in the small intestine and colon. These findings confirmed that the CL-ALH is an effective excipient for designing a sustained-release drug delivery system for the small intestine and colon.

Chemical modification of Aloe vera leaf hydrogel for efficient cadmium-removal from spiked high-hardness groundwater.

Herein, the hydrogel from the leaf of the Aloe vera plant (ALH) was succinylated (SALH) and saponified (NaSALH). The FTIR, solid-state CP/MAS 13C NMR, and SEM-EDX spectroscopic analyses witnessed the formation of SALH and NaSALH from ALH. The pHZPC for NaSALH was found to be 4.90, indicating the presence of -ve charge on its surface. The Cd2+ sorption efficiency of NaSALH was found to be dependent on pH, NaALH dose, Cd2+ concentration, contact time, and temperature. The maximum Cd2+ removal from DW and HGW was found to be 227.27 and 212.77 mg g-1 according to the Langmuir isothermal model (>0.99) at pH of 6, NaSALH dose of 40 mg g-1, Cd2+ concentration of 90 mg L-1, contact time of 30 min, and temperature of 298 K. The kinetic analysis of Cd2+ sorption data witnessed that the Cd2+ removal by chemisorption mechanism and followed pseudo-second-order kinetics (>0.99). The -ve values of ΔG° and ΔH° assessed the spontaneous and exothermic nature of sorption of Cd2+ by NaSALH. The regeneration and sorption/desorption studies indicated that the sorbent NaSALH is regenerable.

Fabrication and optimization of febuxostat-loaded chitosan nanocarriers for better pharmacokinetics profile.

The current research was planned to enhance the bioavailability of hydrophobic drug after oral administration through the development of a nanoparticle drug delivery system (DDS). Therefore, febuxostat-loaded chitosan nanoparticles (FLC NPs) were prepared using a modified ionic gelation method and optimized the reaction conditions through the design of experiments. Design expert software was used to check the desirability of the central composite design and the interactive effects of the independent variables (chitosan concentration, ratio of chitosan to linker, and pH of the medium) on the response variables (size distribution, zeta potential, polydispersity index (PDI), and entrapment efficiency (EE)) of FLC NPs. All ingredients of the optimized formulation (formulation Q) were compatible with each other as evident from FTIR, PXRD, and TGA studies, and displayed 234.7 nm particle size, 0.158 PDI, 25.8 mV zeta potential, and 76.9 % EE. TEM, SEM, and AFM exhibited a smooth, dense, and uniform structure without any visible pores in the structure of FLC NPs. The in vitro and in vivo drug release studies described a sustained release pattern of febuxostat and increased relative bioavailability by 286.63 %. Considering these findings, this chitosan nanoparticle DDS can further be used for improving the EE and bioavailability of hydrophobic drugs.

A superporous and pH-sensitive hydrogel from Salvia hispanica (chia) seeds: stimuli responsiveness, on-off switching, and pharmaceutical applications.

The use of plant seed-based hydrogels to design drug delivery systems (DDSs) has increased due to their swellable, pH-responsive, biocompatible, biodegradable, and non-toxic nature. Herein, the chia seeds hydrogel (CSH) was extracted through an aqueous extraction method to explore its pH and salt-responsive swelling behavior and sustained release potential. The CSH was characterized using Fourier transform infrared (FT-IR) and solid-state cross-polarization magic angle spinning carbon-13 nuclear magnetic resonance (solid/state CP-MAS 13C/NMR) spectra. Thermal analysis indicated that the CSH is a thermally stable material and decomposes in two steps. The scanning electron microscope (SEM) images of CSH witnessed the existence of microscopic channeling and a superporous nature with average pore sizes of 18 ± 11 µm (transverse cross-sections) and 23 ± 15 µm (longitudinal cross-sections). The CSH is a haemocompatible material. The CSH revealed pH and saline-responsive swelling in powder and compressed form (tablet) in the following order; distilled water (DW) > pH 7.4 > pH 6.8 > pH 1.2. Moreover, the swelling of CSH followed second-order kinetics. The swelling of CSH powder and tablets was decreased with increasing salt concentration. The pH, solvent, and saline responsive on/off switching (swelling/deswelling) results of the CSH and tablets disclosed its stimuli-responsive nature. The CSH prolonged the release of valsartan for 5 h at pH 7.4, whereas, negligible release (19.3%) was noted at pH 1.2. The valsartan release followed first-order kinetics and the non-Fickian diffusion. In conclusion, the CSH is a stimuli-responsive smart material with great potential to develop pH-sensitive and targeted DDSs.

A superabsorbent and pH-responsive copolymer-hydrogel based on acemannan from Aloe vera (Aloe barbadensis M.): A smart material for drug delivery.

Combining natural polysaccharides with synthetic materials improves their functional properties which are essential for designing sustained-release drug delivery systems. In this context, the Aloe vera leaf mucilage/hydrogel (ALH) was reacted with acrylic acid (AA) to synthesize a copolymerized hydrogel, i.e., ALH-grafted-Polyacrylic acid (ALH-g-PAA) through free radical copolymerization. Concentrations of the crosslinker N,N'-methylene-bis-acrylamide (MBA), and the initiator potassium persulfate (KPS) were optimized to study their effects on ALH-g-PAA swelling. The FTIR and solid-state NMR (CP/MAS 13C NMR) spectra witnessed the formation of ALH-g-PAA. Scanning electron microscopy (SEM) analysis revealed superporous nature of ALH-g-PAA. The gel fraction (%) of ALH-g-PAA was directly related to the concentrations of AA and MBA whereas the sol fraction was inversely related to the concentrations of AA and MBA. The porosity (%) of ALH-g-PAA directly depends on the concentration of AA and MBA. The ALH-g-PAA swelled admirably at pH 7.4 and insignificantly at pH 1.2. The ALH-g-PAA offered on/off switching properties at pH 7.4/1.2. The metoprolol tartrate was loaded on different formulations of ALH-g-PAA. The ALH-g-PAA showed pH, time, and swelling-dependent release of metoprolol tartrate (MT) for 24 h following the first-order kinetic and Korsmeyer-Peppas model. Haemocompatibility studies ascertained the non-thrombogenic and non-hemolytic behavior of ALH-g-PAA.

A pH responsive and superporous biocomposite hydrogel of Salvia spinosa polysaccharide-co-methacrylic acid for intelligent drug delivery.

Herein, a drug delivery system (SSH-co-MAA) based on the mucilage from seeds of Salvia spinosa (SSH; polymer) and methacrylic acid (MAA; monomer) is introduced for the controlled delivery of venlafaxine HCl using a sustainable chemical approach. The optimized conditions for the designing of the ideal formulation (M4) of SSH-co-MAA were found to be 2.5% (w/w) of SSH, 30.0% (w/w) of MAA, 0.4% (w/w) of both N,N'-methylene-bis-acrylamide (MBA; cross-linker) and potassium persulfate (KPS; initiator). The structure characterization of SSH-co-MAA by Fourier transform infrared and solid-state CP/MAS 13C-NMR spectroscopy has confirmed the grafting of MAA onto SSH. The thermogravimetric analysis revealed that SSH-co-MAA is a stable entity before and after loading of the venlafaxine HCl-loaded SSH-co-MAA (VSSH-co-MAA). Scanning electron microscopy images of SSH-co-MAA after swelling then freeze drying showed the superporous nature of the hydrogel. The gel fraction (%) of SSH-co-MAA depended upon concentration of SSH, MAA, and MBA. The porosity (%) was increased with the increase in the concentration of SSH and decreased with the decrease in the concentration of MAA and MBA. The swelling indices, venlafaxine HCl loading, and release (24 h at the pH of the gastrointestinal tract) from VSSH-co-MAA were found to be dependent on the pH of the swelling media and the concentration of SSH, MAA, and MBA. The release of venlafaxine HCl followed non-Fickian diffusion mechanism. Conclusively, SSH-co-MAA is a novel material for potential application in targeted drug delivery applications.

Polysaccharide-Based Hydrogel from Seeds of Artemisia vulgaris: Extraction Optimization by Box-Behnken Design, pH-Responsiveness, and Sustained Drug Release.

The current research work focuses on the extraction and optimization of the hydrogel (AVM) from the seeds of Artemisia vulgaris using Box-Behnken design-response surface methodology (BBD-RSM). The AVM was obtained through a hot water extraction process. The influence of different factors, including pH (U = 4 to 10), temperature (V = 25 to 110 °C), seed/water ratio, i.e., S/W ratio (W = 1/10 to 1/70 w/v), and seed/water contact time, i.e., S/W time (X = 1 to 12 h) on the yield of AVM was evaluated. The p-value for the analysis of variance (ANOVA) was found to be <0.001, indicating that the yield of AVM mainly depended on the abovementioned factors. The highest yield of AVM, i.e., 15.86%, was found at a pH of 7.12, temperature of 80.04 °C, S/W ratio of 1/33.24 w/v, and S/W time of 8.73 h according to Design-Expert Software. The study of the pH-responsive behavior of AVM in tablet form (formulation AVT3) revealed that AVM is a pH-responsive material with significantly high swelling at pH 7.4. However, less swelling was witnessed at pH 1.2. Moreover, AVM was found to be a sustained release material for esomeprazole at pH 7.4 for 12 h. The drug release from AVT3 was according to the super case-II transport mechanism and zero-order kinetics.

A Smart Hydrogel from Salvia spinosa Seeds: pH Responsiveness, On-off Switching, Sustained Drug Release, and Transit Detection.

BACKGROUND: The use of synthetic and semi-synthetic materials in drug delivery systems has associated drawbacks like costly synthesis, toxicity, and biocompatibility issues. Therefore, there is a need to introduce novel materials to overcome such issues. Naturally occurring and water-swellable polysaccharides are advantageous in overcoming the above-mentioned issues. Therefore, we are reporting a novel hydrogel (SSH) isolated from the seeds of Salvia spinosa as a sustained release material. METHODS: SSH was explored for its pH-dependent and salt-responsive swelling before and after compression in a tablet form. Stimuli-responsive swelling and deswelling were also monitored at pH 7.4 and pH 1.2 in deionized water (DW) and normal saline and DW and ethanol. The sustained-release potential of SSH-based tablets was monitored at gastrointestinal tract (GIT) pH. The transit of SSH tablets was ascertained through an X-ray study. RESULTS: The swelling of SSH in powder and tablet form was found in the order of DW > pH 7.4 > pH 6.8 > pH 1.2. An inverse relation was found between the swelling of SSH and the concentration of the salt solution. The SSH showed stimuli-responsive swelling and de-swelling before and after compression, indicating the unaltered nature of SSH even in a closely packed form, i.e., tablets. Sustained release of theophylline (< 80%) was witnessed at pH 6.8 and 7.4 during the 12 h study following zeroorder kinetics, and radiographic images also showed 9 h retention in GIT. CONCLUSION: These investigations showed the potential of SSH as a pH-sensitive material for sustained and targeted drug delivery.

Pharmaceutical and Pharmacological Evaluation of Amoxicillin after Solubility Enhancement Using the Spray Drying Technique.

The dose frequency of drugs belonging to class II is usually high and associated with harmful effects on the body. The study aimed to enhance the solubility of the poorly water-soluble drug amoxicillin (AM) by the solid dispersion (SD) technique. Six different SDs of AM, F1-F6, were prepared by the spray drying technique using two other carriers, HP-ß-CD (F1-F3) and HPMC (F4-F6), in 1:1, 1:2, and 1:3 drug-to-polymer ratios. These SDs were analyzed to determine their practical yield, drug content, and aqueous solubility using analytical techniques such as Fourier transform infrared spectroscopy, scanning electron microscopy, thermogravimetric analysis, and powder X-ray diffraction. The effect of polymer concentration on SDs was determined using aqueous solubility, in vitro dissolution, and in vivo studies. The results showed no drug-polymer interactions in SDs. Solubility studies showed that SDs based on the drug-to-polymer ratio of 1:2 (F2 and F5) were highly soluble in water compared to those with ratios of 1:1 and 1:3. In vitro dissolution studies also showed that SDs with a ratio of 1:2 released the highest drug concentration from both polymeric systems. The SDs based on HPMC confirmed the more sustained release of the drug as compared to that of HP-ß-CD. All the SDs were observed as stable and amorphous, with a smooth spherical surface. In vivo studies reveal the enhancement of pharmacokinetics parameters as compared to standard AM. Hence, it is confirmed that spray drying is an excellent technique to enhance the solubility of AM in an aqueous medium. This may contribute to the enhancement of the pharmacokinetic behaviors of SDs.

Metal Complexation of Arabinoxylan Engenders a Smart Material Offering pH, Solvents, and Salt Responsive On-Off Swelling with the Potential for Sustained Drug Delivery.

The present study aimed to develop a stable interconnected matrix as a sustained release drug delivery material. Arabinoxylan (AX) was extracted from ispaghula husk and then crosslinked with different concentrations, i.e., 0.5, 1.0, and 1.5 g of CaCl2 per 0.25 g of AX. The crosslinking was confirmed through Fourier transform infrared spectroscopy. The swelling capacity of crosslinked AX (CL-AX) was evaluated against buffer solutions of pH 1.2, 6.8, 7.4, and water. The swelling capacity increased from pH 1.2 to pH 7.4 and followed the second order swelling kinetics. The swelling study also revealed that CL-AX with 1.0 g CaCl2 showed maximum swelling capacity. The swelling-deswelling (on-off switching) behavior of CL-AX was evaluated in water-ethanol, water-0.9% NaCl solution, and buffer solutions of pH 7.4-1.2 and showed responsive swelling-deswelling behavior. Scanning electron microscopy revealed a highly porous nature of CL-AX with a mesh of thin fibrous networking. Hemocompatibility studies of CL-AX revealed its non-thrombogenic and nonhemolytic attributes. The CL-AX matrix tablet prolonged the release of enalapril maleate for 24 h, and the drug release followed the zero order kinetics and super case-II transport mechanism. Therefore, CL-AX can be recognized as a stimuli responsive and hemocompatible biomaterial with sustained drug release potential.

Fabrication of potential macromolecular prodrugs of aspirin and diclofenac with dextran.

Aspirin and diclofenac conjugates with dextran were synthesized as potential macromolecular prodrugs under homogeneous reaction conditions by using 4-methyl-benzenesulfonyl chloride as an acylating agent in the presence of triethylamine as a base. Highly pure conjugates with good yields were synthesized by this acylation method. All of the products were found soluble in aqueous medium as well as in dimethylsulfoxide and N,N-dimethylacetamide. The UV/Vis spectrophotometry has indicated the incorporation of drugs in conjugates and extent of substitution of drug onto dextran polymer. Covalent attachment of the drug onto the drug carrier polymer (dextran) was verified by (1)H NMR and Fourier transform infrared (FTIR) spectroscopic analysis. The prodrugs were analysed by powder X-ray diffraction (XRD) measurements. Phase changes were noticed by powder XRD for all macromolecular prodrugs indicating the change of state of matter towards more crystallinity. Therefore, fabricated macromolecular prodrugs are potential candidates to show better pharmacokinetic profile. All of the products were thoroughly characterized by using different spectroscopic techniques.

A pH-sensitive, stimuli-responsive, superabsorbent, smart hydrogel from psyllium (Plantago ovata) for intelligent drug delivery.

Herein, we report a polysaccharide-based hydrogel isolated from psyllium husk (a well-known dietary fiber) and evaluated for its swelling properties in deionized water (DW) at different physiological pH values, i.e., 1.2, 6.8 and 7.4. Swelling of psyllium hydrogel (PSH) in DW under the influence of temperature and at different concentrations of NaCl and KCl solutions was also examined. A pH-dependent swelling pattern of PSH was observed following the order DW > pH 7.4 > pH 6.8 > pH 1.2. Stimuli-responsive swelling and deswelling (on-off switching) behavior of PSH was observed in DW and ethanol, DW and normal saline, at pH 7.4 and pH 1.2 environments, respectively. Similar swelling behavior and on-off switching attribute of PSH-containing tablets indicated the unaltered nature of PSH even after compression. Scanning electron micrographs of swollen and then freeze-dried PSH via transverse and longitudinal cross-sections revealed hollow channels with an average pore size of 6 ± 2 µm. Furthermore, PSH concentration-dependent sustained release of theophylline from tablet formulation was witnessed for >15 h following the non-Fickian diffusion mechanism. Subacute toxicity studies revealed the non-toxic nature of PSH. Therefore, dietary fiber-based material, i.e., PSH could be a valuable pharmaceutical excipient for intelligent and targeted drug delivery.

A stimuli-responsive, superporous and non-toxic smart hydrogel from seeds of mugwort (Artemisia vulgaris): stimuli responsive swelling/deswelling, intelligent drug delivery and enhanced aceclofenac bioavailability.

Artemisia vulgaris seeds extrude hydrogel (AVH), which shows extraordinary swelling in water, at pH 6.8, and 7.4, which follows second-order kinetics. AVH exhibits reversible swelling/deswelling in ethanol and normal saline as well at pH 7.4 and pH 1.2. Therefore, AVH shows stimuli-responsiveness in different physiological conditions, solvents, and electrolytes. The superporous nature of AVH in swollen/freeze-dried sculpture is exposed in their SEM micrographs. AVH-based aceclofenac tablet formulations offer sustained-release under simulated conditions of the gastrointestinal tract (GIT) in terms of pH and transit time. Pharmacokinetic studies also show the delay and prolonged plasma concentration with t max of 8 h, therefore, such formulations can be used to enhance the bioavailability of aceclofenac. The swelling behavior of the AVH tablet is also assessed using MRI. The in vivo fate of the AVH tablet is monitored by X-ray during the transit through the GIT. Acute toxicity studies of AVH indicate the absence of any toxicity which reveals the safety profile of AVH. Therefore, AVH can be used for oral, topical and ophthalmic drug delivery systems. These results establish the potential of AVH as a stimuli sensitive, pH-dependent, and sustained-release biomaterial for targeted drug delivery.

A superporous and superabsorbent glucuronoxylan hydrogel from quince (Cydonia oblanga): Stimuli responsive swelling, on-off switching and drug release.

Current study was designed to investigate micromeritic properties, water absorption capacity, stimuli (pH, ethanol and saline) responsive swelling-deswelling (on-off switching) and controlled drug release from the polysaccharide glucuronoxylan isolated from the seeds of Quince. The water retention capacity of Quince hydrogel (QH) was found admirable. The hydrogel also exhibited privileged swelling in water and basic buffers (pH 6.8 and 7.4) while insignificant swelling in acidic buffer (pH 1.2). The swelling kinetics of QH follows second order. Moreover, QH deswells in salt (KCl and NaCl) solutions and ethanol. SEM of swollen then freeze dried QH revealed hollow channels with an average diameter of 67.8µm. Furthermore, QH sustained the release of levosulpiride (LS) tablet formulation and drug release mechanism was ascertained super case-II transport. These results signify QH a smart material for sustained release formulations.

Linseed hydrogel-mediated green synthesis of silver nanoparticles for antimicrobial and wound-dressing applications.

Polysaccharides are being extensively employed for the synthesis of silver nanoparticles (Ag NPs) having diverse morphology and applications. Herein, we present a novel and green synthesis of Ag NPs without using any physical reaction conditions. Linseed hydrogel (LSH) was used as a template to reduce Ag+ to Ag0. AgNO3 (10, 20, and 30 mmol) solutions were mixed with LSH suspension in deionized water and exposed to diffused sunlight. Reaction was monitored by noting the change in the color of reaction mixture up to 10 h. Ag NPs showed characteristic ultraviolet-visible (UV/Vis) absorptions from 410 to 437 nm in the case of sunlight and 397-410 nm in the case of temperature study. Transmission electron microscopy images revealed the formation of spherical Ag NPs in the range of 10-35 nm. Face-centered cubic array of Ag NPs was confirmed by characteristic diffraction peaks in powder X-ray diffraction spectrum. Ag NPs were stored in LSH thin films, and UV/Vis spectra recorded after 6 months indicated that Ag NPs retained their texture over the storage period. Significant antimicrobial activity was observed when microbial cultures (bacteria and fungi) were exposed to the synthesized Ag NPs. Wound-healing studies revealed that Ag NP-impregnated LSH thin films could have potential applications as an antimicrobial dressing in wound management procedures.