Photoelectrochemical CO2 Reduction to CO Enabled by a Molecular Catalyst Attached to High-Surface-Area Porous Silicon.

A high-surface-area p-type porous Si photocathode containing a covalently immobilized molecular Re catalyst is highly selective for the photoelectrochemical conversion of CO2 to CO. It gives Faradaic efficiencies of up to 90% for CO at potentials of -1.7 V (versus ferrocenium/ferrocene) under 1 sun illumination in an acetonitrile solution containing phenol. The photovoltage is approximately 300 mV based on comparisons with similar n-type porous Si cathodes in the dark. Using an estimate of the equilibrium potential for CO2 reduction to CO under optimized reaction conditions, photoelectrolysis was performed at a small overpotential, and the onset of electrocatalysis in cyclic voltammograms occurred at a modest underpotential. The porous Si photoelectrode is more stable and selective for CO production than the photoelectrode generated by attaching the same Re catalyst to a planar Si wafer. Further, facile characterization of the porous Si-based photoelectrodes using transmission mode FTIR spectroscopy leads to highly reproducible catalytic performance.

Homogeneous Organic Reductant Based on 4,4'-tBu2-2,2'-Bipyridine for Cross-Electrophile Coupling.

The synthesis of a new homogeneous reductant based on 4,4'-tBu2-2,2'-bipyridine, tBu-OED4, is reported. tBu-OED4 was prepared on a multigram scale in two steps from inexpensive and commercially available starting materials, with no chromatography required for purification. tBu-OED4 has a reduction potential of -1.33 V (vs Ferrocenium/Ferrocene) and is soluble in a range of common organic solvents. We demonstrate that tBu-OED4 can facilitate Ni/Co dual-catalyzed C(sp2)-C(sp3) cross-electrophile coupling reactions and is highly functional group tolerant. tBu-OED4 is expected to be a valuable addition to the set of homogeneous reductants available for organic transformations.

Synthesis and Surface Attachment of Molecular Re(I) Complexes Supported by Functionalized Bipyridyl Ligands.

Eleven 2,2'-bipyridine (bpy) ligands functionalized with attachment groups for covalent immobilization on silicon surfaces were prepared. Five of the ligands feature silatrane functional groups for attachment to metal oxide coatings on the silicon surfaces, while six contain either alkene or alkyne functional groups for attachment to hydrogen-terminated silicon surfaces. The bpy ligands were coordinated to Re(CO)5Cl to form complexes of the type Re(bpy)(CO)3Cl, which are related to known catalysts for CO2 reduction. Six of the new complexes were characterized using X-ray crystallography. As proof of principle, four molecular Re complexes were immobilized on either a thin layer of TiO2 on silicon or hydrogen-terminated silicon. The surface-immobilized complexes were characterized using X-ray photoelectron spectroscopy, IR spectroscopy, and cyclic voltammetry (CV) in the dark and for one representative example in the light. The CO stretching frequencies of the attached complexes were similar to those of the pure molecular complexes, but the CVs were less analogous. For two of the complexes, comparison of the electrocatalytic CO2 reduction performance showed lower CO Faradaic efficiencies for the immobilized complexes than the same complex in solution under similar conditions. In particular, a complex containing a silatrane linked to bpy with an amide linker showed poor catalytic performance and control experiments suggest that amide linkers in conjugation with a redox-active ligand are not stable under highly reducing conditions and alkyl linkers are more stable. A conclusion of this work is that understanding the behavior of molecular Re catalysts attached to semiconducting silicon is more complicated than related complexes, which have previously been immobilized on metallic electrodes.

Compact Super Electron-Donor to Monolayer MoS2.

The surface functionalization of two-dimensional (2D) materials with organic electron donors (OEDs) is a powerful tool to modulate the electronic properties of the material. Here we report a novel molecular dopant, Me-OED, that demonstrates record-breaking molecular doping to MoS2, achieving a carrier density of 1.10 ± 0.37 × 1014 cm-2 at optimal functionalization conditions; the achieved carrier density is much higher than those by other OEDs such as benzyl viologen and an OED based on 4,4'-bipyridine. This impressive doping power is attributed to the compact size of Me-OED, which leads to high surface coverage on MoS2. To confirm, we study tBu-OED, which has an identical reduction potential to Me-OED but is significantly larger. Using field-effect transistor measurements and spectroscopic characterization, we estimate the doping powers of Me- and tBu-OED are 0.22-0.44 and 0.11 electrons per molecule, respectively, in good agreement with calculations. Our results demonstrate that the small size of Me-OED is critical to maximizing the surface coverage and molecular interactions with MoS2, enabling us to achieve unprecedented doping of MoS2.

Correlating Thermodynamic and Kinetic Hydricities of Rhenium Hydrides.

The kinetics of hydride transfer from Re(Rbpy)(CO)3H (bpy = 4,4'-R-2,2'-bipyridine; R = OMe, tBu, Me, H, Br, COOMe, CF3) to CO2 and seven different cationic N-heterocycles were determined. Additionally, the thermodynamic hydricities of complexes of the type Re(Rbpy)(CO)3H were established primarily using computational methods. Linear free-energy relationships (LFERs) derived by correlating thermodynamic and kinetic hydricities indicate that, in general, the rate of hydride transfer increases as the thermodynamic driving force for the reaction increases. Kinetic isotope effects range from inverse for hydride transfer reactions with a small driving force to normal for reactions with a large driving force. Hammett analysis indicates that hydride transfer reactions with greater thermodynamic driving force are less sensitive to changes in the electronic properties of the metal hydride, presumably because there is less buildup of charge in the increasingly early transition state. Bronsted α values were obtained for a range of hydride transfer reactions and along with DFT calculations suggest the reactions are concerted, which enables the use of Marcus theory to analyze hydride transfer reactions involving transition metal hydrides. It is notable, however, that even slight perturbations in the steric properties of the Re hydride or the hydride acceptor result in large deviations in the predicted rate of hydride transfer based on thermodynamic driving forces. This indicates that thermodynamic considerations alone cannot be used to predict the rate of hydride transfer, which has implications for catalyst design.

Homogeneous Organic Electron Donors in Nickel-Catalyzed Reductive Transformations.

Many contemporary organic transformations, such as Ni-catalyzed cross-electrophile coupling (XEC), require a reductant. Typically, heterogeneous reductants, such as Zn0 or Mn0, are used as the electron source in these reactions. Although heterogeneous reductants are highly practical for preparative-scale batch reactions, they can lead to complications in performing reactions on process scale and are not easily compatible with modern applications, such as flow chemistry. In principle, homogeneous organic reductants can address some of the challenges associated with heterogeneous reductants and also provide greater control of the reductant strength, which can lead to new reactivity. Nevertheless, homogeneous organic reductants have rarely been used in XEC. In this Perspective, we summarize recent progress in the use of homogeneous organic electron donors in Ni-catalyzed XEC and related reactions, discuss potential synthetic and mechanistic benefits, describe the limitations that inhibit their implementation, and outline challenges that need to be solved in order for homogeneous organic reductants to be widely utilized in synthetic chemistry. Although our focus is on XEC, our discussion of the strengths and weaknesses of different methods for introducing electrons is general to other reductive transformations.

Control of Catalyst Isomers Using an N-Phenyl-Substituted RN(CH2CH2PiPr2)2 Pincer Ligand in CO2 Hydrogenation and Formic Acid Dehydrogenation.

A novel pincer ligand, iPrPNPhP [PhN(CH2CH2PiPr2)2], which is an analogue of the versatile MACHO ligand, iPrPNHP [HN(CH2CH2PiPr2)2], was synthesized and characterized. The ligand was coordinated to ruthenium, and a series of hydride-containing complexes were isolated and characterized by NMR and IR spectroscopies, as well as X-ray diffraction. Comparisons to previously published analogues ligated by iPrPNHP and iPrPNMeP [CH3N(CH2CH2PiPr2)2] illustrate that there are large changes in the coordination chemistry that occur when the nitrogen substituent of the pincer ligand is altered. For example, ruthenium hydrides supported by the iPrPNPhP ligand always form the syn isomer (where syn/anti refer to the relative orientation of the group on nitrogen and the hydride ligand on ruthenium), whereas complexes supported by iPrPNHP form the anti isomer and complexes supported by iPrPNMeP form a mixture of syn and anti isomers. We evaluated the impact of the nitrogen substituent of the pincer ligand in catalysis by comparing a series of iPrPNRP (R = H, Me, Ph)-ligated ruthenium hydride complexes as catalysts for formic acid dehydrogenation and carbon dioxide (CO2) hydrogenation to formate. The iPrPNPhP-ligated species is the most active for formic acid dehydrogenation, and mechanistic studies suggest that this is likely because there are kinetic advantages for catalysts that operate via the syn isomer. In CO2 hydrogenation, the iPrPNPhP-ligated species is again the most active under our optimal conditions, and we report some of the highest turnover frequencies for homogeneous catalysts. Experimental and theoretical insights into the turnover-limiting step of catalysis provide a basis for the observed trends in catalytic activity. Additionally, the stability of our complexes enabled us to detect a previously unobserved autocatalytic effect involving the base that is added to drive the reaction. Overall, by modifying the nitrogen substituent on the MACHO ligand, we have developed highly active catalysts for formic acid dehydrogenation and CO2 hydrogenation and also provided a framework for future catalyst development.

Tunable and Practical Homogeneous Organic Reductants for Cross-Electrophile Coupling.

The syntheses of four new tunable homogeneous organic reductants based on a tetraaminoethylene scaffold are reported. The new reductants have enhanced air stability compared to current homogeneous reductants for metal-mediated reductive transformations, such as cross-electrophile coupling (XEC), and are solids at room temperature. In particular, the weakest reductant is indefinitely stable in air and has a reduction potential of -0.85 V versus ferrocene, which is significantly milder than conventional reductants used in XEC. All of the new reductants can facilitate C(sp2)-C(sp3) Ni-catalyzed XEC reactions and are compatible with complex substrates that are relevant to medicinal chemistry. The reductants span a range of nearly 0.5 V in reduction potential, which allows for control over the rate of electron transfer events in XEC. Specifically, we report a new strategy for controlled alkyl radical generation in Ni-catalyzed C(sp2)-C(sp3) XEC. The key to our approach is to tune the rate of alkyl radical generation from Katritzky salts, which liberate alkyl radicals upon single electron reduction, by varying the redox potentials of the reductant and Katritzky salt utilized in catalysis. Using our method, we perform XEC reactions between benzylic Katritzky salts and aryl halides. The method tolerates a variety of functional groups, some of which are particularly challenging for most XEC transformations. Overall, we expect that our new reductants will both replace conventional homogeneous reductants in current reductive transformations due to their stability and relatively facile synthesis and lead to the development of novel synthetic methods due to their tunability.

Chemical Reduction of NiII Cyclam and Characterization of Isolated NiI Cyclam with Cryogenic Vibrational Spectroscopy and Inert-Gas-Mediated High-Resolution Mass Spectrometry.

NiII cyclam (cyclam = 1,4,8,11-tetraazacyclotetradecane) is an efficient catalyst for the selective reduction of CO2 to CO. A crucial elementary step in the proposed catalytic cycle is the coordination of CO2 to a NiI cyclam intermediate. Isolation and spectroscopic characterization of this labile NiI species without solvent has proven to be challenging, however, and only partial IR spectra have previously been reported using multiple photon fragmentation of ions generated by gas-phase electron transfer to the NiII cyclam dication at 300 K. Here, we report a chemical reduction method that efficiently prepares NiI cyclam in solution. This enables the NiI complex to be transferred into a cryogenic photofragmentation mass spectrometer using inert-gas-mediated electrospray ionization. The vibrational spectra of the 30 K ion using both H2 and N2 messenger tagging over the range 800-4000 cm-1 were then measured. The resulting spectra were analyzed with the aid of electronic structure calculations, which show strong method dependence in predicted band positions and small molecule activation. The conformational changes of the cyclam ligand induced by binding of the open shell NiI cation were compared with those caused by the spherical, closed-shell LiI cation, which has a similar ionic radius. We also report the vibrational spectrum of a NiI cyclam complex with a strongly bound O2 ligand. The cyclam ligand supporting this species exhibits a large conformational change compared to the complexes with weakly bound N2 and H2, which is likely due to significant charge transfer from Ni to the coordinated O2.

Thermodynamic and kinetic hydricity of transition metal hydrides.

The prevalence of transition metal-mediated hydride transfer reactions in chemical synthesis, catalysis, and biology has inspired the development of methods for characterizing the reactivity of transition metal hydride complexes. Thermodynamic hydricity represents the free energy required for heterolytic cleavage of the metal-hydride bond to release a free hydride ion, H-, as determined through equilibrium measurements and thermochemical cycles. Kinetic hydricity represents the rate of hydride transfer from one species to another, as measured through kinetic analysis. This tutorial review describes the common methods for experimental and computational determination of thermodynamic and kinetic hydricity, including advice on best practices and precautions to help avoid pitfalls. The influence of solvation on hydricity is emphasized, including opportunities and challenges arising from comparisons across several different solvents. Connections between thermodynamic and kinetic hydricity are discussed, and opportunities for utilizing these connections to rationally improve catalytic processes involving hydride transfer are highlighted.

Ni(I)-Alkyl Complexes Bearing Phenanthroline Ligands: Experimental Evidence for CO2 Insertion at Ni(I) Centers.

Although the catalytic carboxylation of unactivated alkyl electrophiles has reached remarkable levels of sophistication, the intermediacy of (phenanthroline)Ni(I)-alkyl species-complexes proposed in numerous Ni-catalyzed reductive cross-coupling reactions-has been subject to speculation. Herein we report the synthesis of such elusive (phenanthroline)Ni(I) species and their reactivity with CO2, allowing us to address a long-standing question related to Ni-catalyzed carboxylation reactions.

Differences in the Performance of Allyl Based Palladium Precatalysts for Suzuki-Miyaura Reactions.

Palladium(II) precatalysts are used extensively to facilitate cross-coupling reactions because they are bench stable and give high activity. As a result, precatalysts such as Buchwald's palladacycles, Organ's PEPPSI species, Nolan's allyl-based complexes, and Yale's 1-tert-butylindenyl containing complexes, are all commercially available. Comparing the performance of the different classes of precatalysts is challenging because they are typically used under different conditions, in part because they are reduced to the active species via different pathways. However, within a particular class of precatalyst, it is easier to compare performance because they activate via similar pathways and are used under the same conditions. Here, we evaluate the activity of different allyl-based precatalysts, such as (η3-allyl)PdCl(L), (η3-crotyl)PdCl(L), (η3-cinnamyl)PdCl(L), and (η3-1-tert-butylindenyl)PdCl(L) in Suzuki-Miyaura reactions. Specifically, we evaluate precatalyst performance as the ancillary ligand (NHC or phosphine), reaction conditions, and substrates are varied. In some cases, we connect relative activity to both the mechanism of activation and the prevalence of the formation of inactive palladium(I) dimers. Additionally, we compare the performance of in situ generated precatalysts with commonly used palladium sources such as tris(dibenzylideneacetone)dipalladium(0) (Pd2dba3), bis(acetonitrile)dichloropalladium(II) (Pd(CH3CN)2Cl2), and palladium acetate. Our results provide information about which precatalyst to use under different conditions.

The Role of Proton Shuttles in the Reversible Activation of Hydrogen via Metal-Ligand Cooperation.

The reversible activation of H2 via a pathway involving metal-ligand cooperation (MLC) is proposed to be important in many transition metal catalyzed hydrogenation and dehydrogenation reactions. Nevertheless, there is a paucity of experimental information probing the mechanism of this transformation. Here, we present an in-depth kinetic study of the 1,2-addition of H2 via an MLC pathway to the widely used iron catalyst [(iPrPNP)FeH(CO)] (1) (iPrPNP = N(CH2CH2PiPr2)2-). We report one of the first experimental demonstrations of an enhancement in rate for the activation of H2 using protic additives, which operate as "proton shuttles". Our results indicate that proton shuttles need to be able to both simultaneously donate and accept a proton, and the best shuttles are molecules that are strong hydrogen bond donors but sufficiently weak acids to avoid deleterious protonation of the transition metal complex. Additionally, comparison of the rate of H2 activation via an MLC pathway between 1 and two widely used ruthenium catalysts enables more general conclusions about the role of the metal, ancillary ligand, and proton shuttles in H2 activation. The results of this study provide guidance about the design of catalysts and additives to promote H2 activation via an MLC pathway.

Understanding the Individual and Combined Effects of Solvent and Lewis Acid on CO2 Insertion into a Metal Hydride.

The insertion of CO2 into a metal hydride bond to form a metal formate is a key elementary step in many catalytic cycles for CO2 conversion. Similarly, the microscopic reverse reaction, the decarboxylation of a metal formate to form a metal hydride and CO2, is important in both organic synthesis and strategies for hydrogen storage using organic liquids. There are however few experimental studies probing the mechanism of these reactions and identifying the effects of specific variables such as Lewis acid (LA) additives or solvent, which have been shown to significantly impact catalytic performance. In this study, we use a rapid mixing stopped-flow instrument to study the kinetics of CO2 insertion into the cationic ruthenium hydride [Ru(tpy)bpy)H]PF6 (tpy = 2,2':6',2″-terpyridine, bpy = 2,2'-bipyridine) in various solvents, both in the presence and in the absence of a LA. We show that LAs can increase the observed rate of this reaction and determine the first quantitative trends for the rate enhancement observed for CO2 insertion in the presence of cationic LAs, Li+ ≫ Na+ > K+ > Rb+. Furthermore, we show that the rate enhancement observed with LAs is solvent dependent. Specifically, as the acceptor number (AN) of the solvent increases, the effect of the LA becomes smaller. Last, we demonstrate that there is a significant solvent effect on CO2 insertion in the absence of a LA. Although the AN of the solvent has been previously used to predict the rate of CO2 insertion, this work shows that the best model for the rate of insertion is based on the Dimroth-Reichardt ET(30) value of the solvent, a parameter that better accounts for specific solute/solvent interactions.

Synthesis and Reactivity of Paramagnetic Nickel Polypyridyl Complexes Relevant to C(sp2 )-C(sp3 )Coupling Reactions.

A number of new transition metal catalyzed methods for the formation of C(sp2 )-C(sp3 ) bonds have recently been described. These reactions often utilize bidentate polypyridyl-ligated Ni catalysts, and paramagnetic NiI halide or aryl species are proposed in the catalytic cycles. However, there is little knowledge about complexes of this type. Here, we report the synthesis of paramagnetic bidentate polypyridyl-ligated Ni halide and aryl complexes through elementary reactions proposed in catalytic cycles for C(sp2 )-C(sp3 ) bond formation. We investigate the ability of these complexes to undergo organometallic reactions that are relevant to C(sp2 )-C(sp3 ) coupling through stoichiometric studies and also explore their catalytic activity.

Reversible Hydrogenation of Carbon Dioxide to Formic Acid and Methanol: Lewis Acid Enhancement of Base Metal Catalysts.

New and sustainable energy vectors are required as a consequence of the environmental issues associated with the continued use of fossil fuels. H2 is a potential clean energy source, but as a result of problems associated with its storage and transport as a gas, chemical H2 storage (CHS), which involves the dehydrogenation of small molecules, is an attractive alternative. In principle, formic acid (FA, 4.4 wt % H2) and methanol (MeOH, 12.6 wt % H2) can be obtained renewably and are excellent prospective liquid CHS materials. In addition, MeOH has considerable potential both as a direct replacement for gasoline and as a fuel cell input. The current commercial syntheses of FA and MeOH, however, use nonrenewable feedstocks and will not facilitate the use of these molecules for CHS. An appealing option for the sustainable synthesis of both FA and MeOH, which could be implemented on a large scale, is the direct metal catalyzed hydrogenation of CO2. Furthermore, given that CO2 is a readily available, nontoxic and inexpensive source of carbon, it is expected that there will be economic and environmental benefits from using CO2 as a feedstock. One strategy to facilitate both the dehydrogenation of FA and MeOH and the hydrogenation of CO2 and H2 to FA and MeOH is to utilize a homogeneous transition metal catalyst. In particular, the development of catalysts based on first row transition metals, which are cheaper, and more abundant than their precious metal counterparts, is desirable. In this Account, we describe recent advances in the development of iron and cobalt systems for the hydrogenation of CO2 to FA and MeOH and the dehydrogenation of FA and MeOH and provide a brief comparison between precious metal and base metal systems. We highlight the different ligands that have been used to stabilize first row transition metal catalysts and discuss the use of additives to promote catalytic activity. In particular, the Account focuses on the crucial role that alkali metal Lewis acid cocatalysts can play in promoting increased activity and catalyst stability for first row transition metal systems. We relate these effects to the nature of the elementary steps in the catalytic cycle and describe how the Lewis acids stabilize the crucial transition states. For all four transformations, we discuss in detail the currently proposed catalytic pathways, and throughout the Account we identify mechanistic similarities among catalysts for the four processes. The limitations of current catalytic systems are detailed, and suggestions are provided on the improvements that are likely required to develop catalysts that are more stable, active, and practical.

Rapidly Activating Pd-Precatalyst for Suzuki-Miyaura and Buchwald-Hartwig Couplings of Aryl Esters.

Esters are valuable electrophiles for cross-coupling due to their ubiquity and ease of synthesis. However, harsh conditions are traditionally required for the effective cross-coupling of ester substrates. Utilizing a recently discovered precatalyst, Pd-catalyzed Suzuki-Miyaura and Buchwald-Hartwig reactions involving cleavage of the C(acyl)-O bond of aryl esters that proceed under mild conditions are reported. The Pd(II) precatalyst is highly active because it is reduced to the Pd(0) active species more rapidly than previous precatalysts.

Mechanistic Study of an Improved Ni Precatalyst for Suzuki-Miyaura Reactions of Aryl Sulfamates: Understanding the Role of Ni(I) Species.

Nickel precatalysts are potentially a more sustainable alternative to traditional palladium precatalysts for the Suzuki-Miyaura coupling reaction. Currently, there is significant interest in Suzuki-Miyaura coupling reactions involving readily accessible phenolic derivatives such as aryl sulfamates, as the sulfamate moiety can act as a directing group for the prefunctionalization of the aromatic backbone of the electrophile prior to cross-coupling. By evaluating complexes in the Ni(0), (I), and (II) oxidation states we report a precatalyst, (dppf)Ni(o-tolyl)(Cl) (dppf = 1,1'-bis(diphenylphosphino)ferrocene), for Suzuki-Miyaura coupling reactions involving aryl sulfamates and boronic acids, which operates at a significantly lower catalyst loading and at milder reaction conditions than other reported systems. In some cases it can even function at room temperature. Mechanistic studies on precatalyst activation and the speciation of nickel during catalysis reveal that Ni(I) species are formed in the catalytic reaction via two different pathways: (i) the precatalyst (dppf)Ni(o-tolyl)(Cl) undergoes comproportionation with the active Ni(0) species; and (ii) the catalytic intermediate (dppf)Ni(Ar)(sulfamate) (Ar = aryl) undergoes comproportionation with the active Ni(0) species. In both cases the formation of Ni(I) is detrimental to catalysis, which is proposed to proceed via a Ni(0)/Ni(II) cycle. DFT calculations are used to support experimental observations and provide insight about the elementary steps involved in reactions directly on the catalytic cycle, as well as off-cycle processes. Our mechanistic investigation provides guidelines for designing even more active nickel catalysts.

Carbon Dioxide Insertion into Group 9 and 10 Metal-Element σ Bonds.

Carbon dioxide (CO2) is an appealing feedstock for the sustainable preparation of a variety of carbon-based commodity chemicals because of its high abundance, low cost, and nontoxicity. The high kinetic and thermodynamic stability of CO2, however, means that there are currently only a limited number of practical catalytic systems for the conversion of CO2 into more valuable chemicals, and continued research in this area is required. One promising approach for the eventual transformation of CO2 is to initially insert the molecule into transition-metal-element σ bonds such as M-H, M-OR, M-NR2, and M-CR3 bonds to form products of the type M-OC(O)E (E = H, OR, NR2, or CR3). CO2 insertion has been demonstrated in numerous stoichiometric reactions involving transition-metal complexes, but in cases where insertion results in the formation of strong M-O bonds, the products are often too stable to undergo further transformations. Group 9 and 10 transition-metal complexes (M = Ni, Pd, Pt, Co, Rh, or Ir) form relatively weak M-O bonds, and as a consequence, a number of group 9 and 10 transition-metal catalysts in which CO2 insertion is proposed as an elementary step in catalysis have been developed. In this Award Article, we summarize group 9 and 10 transition-metal complexes in which CO2 insertion into a metal-element σ bond to form a M-OC(O)E-type product has been observed. Mechanistic similarities and differences are highlighted by comparing CO2 insertion reactions in different types of group 9 and 10 metal-element σ bonds, and a general trend for predicting the rate-determining step of the insertion process is described based on the nucleophilicity of the element in the σ bond. Although we focus on stoichiometric reactivity, the relevance of CO2 insertion to catalytic reactions is also emphasized throughout the paper.

Dinuclear Pd(I) complexes with bridging allyl and related ligands.

There are many important synthetic methods that utilize palladium catalysts. In most of these reactions, the palladium species are proposed to exist exclusively in either the Pd(0) or Pd(II) oxidation states. However, in the last decade, dinuclear Pd(I) complexes have repeatedly been isolated from reaction mixtures previously suggested to involve only species in the Pd(0) and Pd(II) oxidation states. As a consequence, in order to design improved catalysts there is considerable interest in understanding the chemistry of dinuclear Pd(I) complexes. A significant proportion of the known dinuclear Pd(I) complexes are supported by bridging allyl or related ligands such as cyclopentadienyl or indenyl ligands. This review provides a detailed account of the synthesis, electronic structure and stoichiometric reactivity of dinuclear Pd(I) complexes with bridging allyl and related ligands. Additionally, it describes recent work where dinuclear Pd(I) complexes with bridging allyl ligands have been detected in catalytic reactions, such as cross-coupling, and discusses the potential implications for catalysis.