Element Distributions in Bimetallic Aerogels.

ConspectusMetal aerogels assembled from nanoparticles have captured grand attention because they combine the virtues of metals and aerogels and are regarded as ideal materials to address current environmental and energy issues. Among these aerogels, those composed of two metals not only display combinations (superpositions) of the properties of their individual metal components but also feature novel properties distinctly different from those of their monometallic relatives. Therefore, quite some effort has been invested in refining the synthetic methods, compositions, and structures of such bimetallic aerogels as to boost their performance for the envisaged application(s). One such use would be in the field of electrocatalysis, whereby it is also of utmost interest to unravel the element distributions of the (multi)metallic catalysts to achieve a ratio of their bottom-to-up design. Regarding the element distributions in bimetallic aerogels, advanced characterization techniques have identified alloys, core-shells, and structures in which the two metal particles are segregated (i.e., adjacent but without alloy or core-shell structure formation). While an almost infinite number of metal combinations to form bimetallic aerogels can be envisaged, the knowledge of their formation mechanisms and the corresponding element distributions is still in its infancy. The evolution of the observed musters is all but well understood, not to mention the positional changes of the elements observed in operando or in beginning- vs end-of-life comparisons (e.g., in fuel cell applications).With this motivation, in this Account we summarize the endeavors made in element distribution monitoring in bimetallic aerogels in terms of synthetic methods, expected structures, and their evolution during electrocatalysis. After an introductory chapter, we first describe briefly the two most important characterization techniques used for this, namely, scanning transmission electron microscopy (STEM) combined with element mapping (e.g., energy-dispersive X-ray spectroscopy (EDXS)) and X-ray absorption spectroscopy (XAS). We then explain the universal methods used to prepare bimetallic aerogels with different compositions. Those are divided into one-step methods in which gels formed from mixtures of the respective metal salts are coreduced and two-step approaches in which monometallic nanoparticles are mixed and gelated. Subsequently, we summarize the current state-of-knowledge on the element distributions unraveled using diverse characterization methods. This is extended to investigations of the element distributions being altered during electrochemical cycling or other loads. So far, a theoretical understanding of these processes is sparse, not to mention predictions of element distributions. The Account concludes with a series of remarks on current challenges in the field and an outlook on the gains that the field would earn from a solid understanding of the underlying processes and a predictive theoretical backing.

Impact of Surface Composition Changes on the CO2-Reduction Performance of Au-Cu Aerogels.

Over the past decades, the electrochemical CO2-reduction reaction (CO2RR) has emerged as a promising option for facilitating intermittent energy storage while generating industrial raw materials of economic relevance such as CO. Recent studies have reported that Au-Cu bimetallic nanocatalysts feature a superior CO2-to-CO conversion as compared with the monometallic components, thus improving the noble metal utilization. Under this premise and with the added advantage of a suppressed H2-evolution reaction due to absence of a carbon support, herein, we employ bimetallic Au3Cu and AuCu aerogels (with a web thickness ≈7 nm) as CO2-reduction electrocatalysts in 0.5 M KHCO3 and compare their performance with that of a monometallic Au aerogel. We supplement this by investigating how the CO2RR-performance of these materials is affected by their surface composition, which we modified by systematically dissolving a part of their Cu-content using cyclic voltammetry (CV). To this end, the effect of this CV-driven composition change on the electrochemical surface area is quantified via Pb underpotential deposition, and the local structural and compositional changes are visually assessed by employing identical-location transmission electron microscopy and energy-dispersive X-ray analyses. When compared to the pristine aerogels, the CV-treated samples displayed superior CO Faradaic efficiencies (≈68 vs ≈92% for Au3Cu and ≈34 vs ≈87% for AuCu) and CO partial currents, with the AuCu aerogel outperforming the Au3Cu and Au counterparts in terms of Au-mass normalized CO currents among the CV-treated samples.

Decoupling the Contributions of Different Instability Mechanisms to the PEMFC Performance Decay of Non-noble Metal O2-Reduction Catalysts.

Non-noble metal catalysts (NNMCs) hold the potential to replace the expensive Pt-based materials currently used to speed up the oxygen reduction reaction (ORR) in proton exchange membrane fuel cell (PEMFC) cathodes, but they feature poor durability that inhibits their implementation in commercial PEMFCs. This performance decay is commonly ascribed to the operative demetallation of their ORR-active sites, the electro-oxidation of the carbonaceous matrix that hosts these active centers, and/or the chemical degradation of the ionomer, active sites, and/or carbon support by radicals derived from the H2O2 produced as an ORR by-product. However, little is known regarding the relative contributions of these mechanisms to the overall PEMFC performance loss. With this motivation, in this study, we combined four degradation protocols entailing different cathode gas feeds (i.e., air vs N2), potential hold values, and durations to decouple the relative impact of the above deactivation mechanisms to the overall performance decay. Our results indicate that H2O2-related instability does not depend on the operative voltage but only on the ORR charge. Moreover, the electro-oxidation of the carbon matrix at high potentials (which for the catalyst tested herein triggers at 0.7 V) seems to be more detrimental to the NNMCs' activity than the demetallation occurring at low potentials.

Spectroscopy vs. Electrochemistry: Catalyst Layer Thickness Effects on Operando/In Situ Measurements.

In recent years, operando/in situ X-ray absorption spectroscopy (XAS) has become an important tool in the electrocatalysis community. However, the high catalyst loadings often required to acquire XA-spectra with a satisfactory signal-to-noise ratio frequently imply the use of thick catalyst layers (CLs) with large ion- and mass-transport limitations. To shed light on the impact of this variable on the spectro-electrochemical results, in this study we investigate Pd-hydride formation in carbon-supported Pd-nanoparticles (Pd/C) and an unsupported Pd-aerogel with similar Pd surface areas but drastically different morphologies and electrode packing densities. Our in situ XAS and rotating disk electrode (RDE) measurements with different loadings unveil that the CL-thickness largely determines the hydride formation trends inferred from spectro-electrochemical experiments, therewith calling for the minimization of the CL-thickness in such experiments and the use of complementary thin-film control measurements.

57Fe-Enrichment effect on the composition and performance of Fe-based O2-reduction electrocatalysts.

Pt-group metal (PGM)-free catalysts of the Me-N-C type based on abundant and inexpensive elements have gained importance in the field of oxygen reduction reaction (ORR) electrocatalysis due to their promising ORR-activities. Their insufficient stability, however, has fueled the interest in obtaining an in-depth understanding of their composition, which requires highly sensitive techniques compatible with their low metal contents (typically <5 wt%). In the particular context of iron-based materials, 57Fe-Mössbauer spectroscopy is often used to provide such compositional information, but requires (partially) 57Fe-enriched precursors. As a consequence, the extrapolation of conclusions drawn from Mössbauer measurements on 57Fe-enriched catalysts to equivalent materials with the standard isotope distribution relies on the assumption that the metal precursor's isotopic profile does not affect the catalysts' composition and ORR-activity. To verify this hypothesis, in this study we prepared two series of Fe-based catalysts using distinctively different synthesis approaches and various relative contents of 57Fe-enriched precursors, and observed that the extent of the latter parameter significantly affected the catalysts' ORR-activity. This effect was successfully correlated with the Fe-speciation of the catalysts inferred from the characterization of these samples with Mössbauer and X-ray absorption spectroscopies. Ultimately, these results highlight the crucial importance of verifying the consistency of the catalysts' activity and composition upon comparing standard and 57Fe-enriched samples.

Potential-Induced Spin Changes in Fe/N/C Electrocatalysts Assessed by In Situ X-ray Emission Spectroscopy.

The commercial success of the electrochemical energy conversion technologies required for the decarbonization of the energy sector requires the replacement of the noble metal-based electrocatalysts currently used in (co-)electrolyzers and fuel cells with inexpensive, platinum-group metal-free analogs. Among these, Fe/N/C-type catalysts display promising performances for the reduction of O2 or CO2 , but their insufficient activity and stability jeopardize their implementation in such devices. To circumvent these issues, a better understanding of the local geometric and electronic structure of their catalytic active sites under reaction conditions is needed. Herein we shed light on the electronic structure of the molecular sites in two Fe/N/C catalysts by probing their average spin state with X-ray emission spectroscopy (XES). Chiefly, our in situ XES measurements reveal for the first time the existence of reversible, potential-induced spin state changes in these materials.

Surface distortion as a unifying concept and descriptor in oxygen reduction reaction electrocatalysis.

Tuning the surface structure at the atomic level is of primary importance to simultaneously meet the electrocatalytic performance and stability criteria required for the development of low-temperature proton-exchange membrane fuel cells (PEMFCs). However, transposing the knowledge acquired on extended, model surfaces to practical nanomaterials remains highly challenging. Here, we propose 'surface distortion' as a novel structural descriptor, which is able to reconciliate and unify seemingly opposing notions and contradictory experimental observations in regards to the electrocatalytic oxygen reduction reaction (ORR) reactivity. Beyond its unifying character, we show that surface distortion is pivotal to rationalize the electrocatalytic properties of state-of-the-art of PtNi/C nanocatalysts with distinct atomic composition, size, shape and degree of surface defectiveness under a simulated PEMFC cathode environment. Our study brings fundamental and practical insights into the role of surface defects in electrocatalysis and highlights strategies to design more durable ORR nanocatalysts.

On the Oxidation State of Cu2 O upon Electrochemical CO2 Reduction: An XPS Study.

The encouraging selectivity of copper oxides for the electroreduction of CO2 into ethylene and alcohols has led to a vivid debate on the possible relation between their operando (sub-)surface oxidation state (i. e. fully reduced or partially oxidized) and this distinct reactivity. The high roughness of the Cu oxides used in previous studies on this matter adds complexity to this controversy and motivated us to prepare quasi-planar Cu2 O thin films that displayed a CO2 reduction selectivity similar to that of oxide-derived copper catalysts reported in previous studies. Most importantly, when the post-mortem thin films were transferred for characterization in an air-free environment, X-ray photoelectron spectroscopy measurements confirmed their complete reduction in the course of the CO2 reduction reaction. Thus, our results indicate that the selectivity of the Cu oxides featured in previous studies stems from their enhanced roughness, highlighting the importance of controlled sample transfer upon post-mortem characterization with ex situ techniques.

State-of-the-art Nanofabrication in Catalysis.

We present recent developments in top-down nanofabrication that have found application in catalysis research. To unravel the complexity of catalytic systems, the design and use of models with control of size, morphology, shape and inter-particle distances is a necessity. The study of well-defined and ordered nanoparticles on a support contributes to the understanding of complex phenomena that govern reactions in heterogeneous and electro-catalysis. We review the strengths and limitations of different nanolithography methods such as electron beam lithography (EBL), photolithography, extreme ultraviolet (EUV) lithography and colloidal lithography for the creation of such highly tunable catalytic model systems and their applications in catalysis. Innovative strategies have enabled particle sizes reaching dimensions below 10 nm. It is now possible to create pairs of particles with distance controlled with an extremely high precision in the order of one nanometer. We discuss our approach to study these model systems at the single-particle level using X-ray absorption spectroscopy and show new ways to fabricate arrays of single nanoparticles or nanoparticles in pairs over a large area using EBL and EUV-achromatic Talbot lithography. These advancements have provided new insights into the active sites in metal catalysts and enhanced the understanding of the role of inter-particle interactions and catalyst supports, such as in the phenomenon of hydrogen spillover. We present a perspective on future directions for employing top-down nanofabrication in heterogeneous and electrocatalysis. The rapid development in nanofabrication and characterization methods will continue to have an impact on understanding of complex catalytic processes.

Unsupported Pt-Ni Aerogels with Enhanced High Current Performance and Durability in Fuel Cell Cathodes.

Highly active and durable oxygen reduction catalysts are needed to reduce the costs and enhance the service life of polymer electrolyte fuel cells (PEFCs). This can be accomplished by alloying Pt with a transition metal (for example Ni) and by eliminating the corrodible, carbon-based catalyst support. However, materials combining both approaches have seldom been implemented in PEFC cathodes. In this work, an unsupported Pt-Ni alloy nanochain ensemble (aerogel) demonstrates high current PEFC performance commensurate with that of a carbon-supported benchmark (Pt/C) following optimization of the aerogel's catalyst layer (CL) structure. The latter is accomplished using a soluble filler to shift the CL's pore size distribution towards larger pores which improves reactant and product transport. Chiefly, the optimized PEFC aerogel cathodes display a circa 2.5-fold larger surface-specific ORR activity than Pt/C and maintain 90 % of the initial activity after an accelerated stress test (vs. 40 % for Pt/C).

Electrochemical CO2 Reduction - A Critical View on Fundamentals, Materials and Applications.

The electrochemical reduction of CO(2) has been extensively studied over the past decades. Nevertheless, this topic has been tackled so far only by using a very fundamental approach and mostly by trying to improve kinetics and selectivities toward specific products in half-cell configurations and liquid-based electrolytes. The main drawback of this approach is that, due to the low solubility of CO(2) in water, the maximum CO(2) reduction current which could be drawn falls in the range of 0.01-0.02 A cm(-2). This is at least an order of magnitude lower current density than the requirement to make CO(2)-electrolysis a technically and economically feasible option for transformation of CO(2) into chemical feedstock or fuel thereby closing the CO(2) cycle. This work attempts to give a short overview on the status of electrochemical CO(2) reduction with respect to challenges at the electrolysis cell as well as at the catalyst level. We will critically discuss possible pathways to increase both operating current density and conversion efficiency in order to close the gap with established energy conversion technologies.

Quantification of PEFC Catalyst Layer Saturation via In Silico, Ex Situ, and In Situ Small-Angle X-ray Scattering.

The complex nature of liquid water saturation of polymer electrolyte fuel cell (PEFC) catalyst layers (CLs) greatly affects the device performance. To investigate this problem, we present a method to quantify the presence of liquid water in a PEFC CL using small-angle X-ray scattering (SAXS). This method leverages the differences in electron densities between the solid catalyst matrix and the liquid water filled pores of the CL under both dry and wet conditions. This approach is validated using ex situ wetting experiments, which aid the study of the transient saturation of a CL in a flow cell configuration in situ. The azimuthally integrated scattering data are fitted using 3D morphology models of the CL under dry conditions. Different wetting scenarios are realized in silico, and the corresponding SAXS data are numerically simulated by a direct 3D Fourier transformation. The simulated SAXS profiles of the different wetting scenarios are used to interpret the measured SAXS data which allows the derivation of the most probable wetting mechanism within a flow cell electrode.

Development and validation of a clinical score for identifying patients with high risk of latent autoimmune adult diabetes (LADA): The LADA primary care-protocol study.

BACKGROUND: Latent autoimmune diabetes in adults (LADA) is a type of diabetes mellitus showing overlapping characteristics between type 1 Diabetes Mellitus and type 2 Diabetes Mellitus (T2DM), and autoimmunity against insulin-producing pancreatic cells. For its diagnosis, at least one type of anti-pancreatic islet antibody (GADAb is the most common) is required. Many authors recommend performing this measure in all newly diagnosed patients with DM, but it is not possible in Primary Health Care (PHC) due to its high cost. Currently, a relevant proportion of patients diagnosed as T2DM could be LADA. Confusing LADA with T2DM has clinical and safety implications, given its different therapeutic approach. The main objective of the study is to develop and validate a clinical score for identifying adult patients with DM at high risk of LADA in PHC. METHODS: This is an observational, descriptive, cross-sectional study carried out in Primary Care Health Centers with a centralized laboratory. All people over 30 years of age diagnosed with diabetes within a minimum of 6 months and a maximum of 4 years before the start of the study will be recruited. Individuals will be recruited by consecutive sampling. The study variables will be obtained through clinical interviews, physical examinations, and electronic medical records. The following variables will be recorded: those related to Diabetes Mellitus, sociodemographic, anthropometric, lifestyle habits, laboratory parameters, presence of comorbidities, additional treatments, personal or family autoimmune disorders, self-perceived health status, Fourlanos criteria, and LADA diagnosis (as main variable) according to current criteria. DISCUSSION: The study will provide an effective method for identifying patients at increased risk of LADA and, therefore, candidates for antibody testing. However, a slight participation bias is to be expected. Differences between participants and non-participants will be studied to quantify this potential bias.

Validation of diagnosis of acute myocardial infarction and stroke in electronic medical records: a primary care cross-sectional study in Madrid, Spain (the e-MADVEVA Study).

OBJECTIVES: To validate the diagnoses of acute myocardial infarction (AMI) and stroke recorded in electronic medical records (EMR) and to estimate the population prevalence of both diseases in people aged ≥18 years. DESIGN: Cross-sectional validation study. SETTING: 45 primary care centres. PARTICIPANTS: Simple random sampling of diagnoses of AMI and stroke (International Classification of Primary Care-2 codes K75 and K90, respectively) registered by 55 physicians and random age-matched and sex-matched sampling of the records that included in primary care EMRs in Madrid (Spain). PRIMARY AND SECONDARY OUTCOME MEASURES: Sensitivity, specificity, positive and negative predictive values and overall agreement were calculated using the kappa statistic. Applied gold standards were ECGs, brain imaging studies, hospital discharge reports, cardiology reports and neurology reports. In the case of AMI, the ESC/ACCF/AHA/WHF Expert Consensus Document was also used. Secondary outcomes were the estimated prevalence of both diseases considering the sensitivity and specificity obtained (true prevalence). RESULTS: The sensitivity of a diagnosis of AMI was 98.11% (95% CI, 96.29 to 99.03), and the specificity was 97.42% (95% CI, 95.44 to 98.55). The sensitivity of a diagnosis of stroke was 97.56% (95% CI, 95.56 to 98.68), and the specificity was 94.51% (95% CI, 91.96 to 96.28). No differences in the results were found after stratification by age and sex (both diseases). The prevalence of AMI and stroke was 1.38% and 1.27%, respectively. CONCLUSION: The validation results show that diagnoses of AMI and stroke in primary care EMRs constitute a helpful tool in epidemiological studies. The prevalence of AMI and stroke was lower than 2% in the population aged over 18 years.

Structure of the catalytic sites in Fe/N/C-catalysts for O2-reduction in PEM fuel cells.

Fe-based catalytic sites for the reduction of oxygen in acidic medium have been identified by (57)Fe Mössbauer spectroscopy of Fe/N/C catalysts containing 0.03 to 1.55 wt% Fe, which were prepared by impregnation of iron acetate on carbon black followed by heat-treatment in NH(3) at 950 °C. Four different Fe-species were detected at all iron concentrations: three doublets assigned to molecular FeN(4)-like sites with their ferrous ions in a low (D1), intermediate (D2) or high (D3) spin state, and two other doublets assigned to a single Fe-species (D4 and D5) consisting of surface oxidized nitride nanoparticles (Fe(x)N, with x≤ 2.1). A fifth Fe-species appears only in those catalysts with Fe-contents ≥0.27 wt%. It is characterized by a very broad singlet, which has been assigned to incomplete FeN(4)-like sites that quickly dissolve in contact with an acid. Among the five Fe-species identified in these catalysts, only D1 and D3 display catalytic activity for the oxygen reduction reaction (ORR) in the acid medium, with D3 featuring a composite structure with a protonated neighbour basic nitrogen and being by far the most active species, with an estimated turn over frequency for the ORR of 11.4 e(-) per site per s at 0.8 V vs. RHE. Moreover, all D1 sites and between 1/2 and 2/3 of the D3 sites are acid-resistant. A scheme for the mechanism of site formation upon heat-treatment is also proposed. This identification of the ORR-active sites in these catalysts is of crucial importance to design strategies to improve the catalytic activity and stability of these materials.

Electrochemical Surface Area Quantification, CO2 Reduction Performance, and Stability Studies of Unsupported Three-Dimensional Au Aerogels versus Carbon-Supported Au Nanoparticles.

The efficient scale-up of CO2-reduction technologies is a pivotal step to facilitate intermittent energy storage and for closing the carbon cycle. However, there is a need to minimize the occurrence of undesirable side reactions like H2 evolution and achieve selective production of value-added CO2-reduction products (CO and HCOO-) at as-high-as-possible current densities. Employing novel electrocatalysts such as unsupported metal aerogels, which possess a highly porous three-dimensional nanostructure, offers a plausible approach to realize this. In this study, we first quantify the electrochemical surface area of an Au aerogel (≈5 nm in web thickness) using the surface oxide-reduction and copper underpotential deposition methods. Subsequently, the aerogel is tested for its CO2-reduction performance in an in-house developed, two-compartment electrochemical cell. For comparison purposes, similar measurements are also performed on polycrystalline Au and a commercial catalyst consisting of Au nanoparticles supported on carbon black (Au/C). The Au aerogel exhibits a faradaic efficiency of ≈97% for CO production at ≈-0.48 VRHE, with a suppression of H2 production compared to Au/C that we ascribe to its larger Au-particle size. Finally, identical-location transmission electron microscopy of both nanomaterials before and after CO2-reduction reveals that, unlike Au/C, the aerogel network retains its nanoarchitecture at the potential of peak CO production.

Green chemistry and first-principles theory enhance catalysis: synthesis and 6-fold catalytic activity increase of sub-5 nm Pd and Pt@Pd nanocubes.

Synthesizing metal nanoparticles with fine control of size, shape and surface properties is of high interest for applications such as catalysis, nanoplasmonics, and fuel cells. In this contribution, we demonstrate that the citrate-coated surfaces of palladium (Pd) and platinum (Pt)@Pd nanocubes with a lateral length <5 nm and low polydispersity in shape achieve superior catalytic properties. The synthesis achieves great control of the nanoparticle's physico-chemical properties by using only biogenic reagents and bromide ions in water while being fast, easy to perform and scalable. The role of the seed morphology is pivotal as Pt single crystal seeds are necessary to achieve low polydispersity in shape and prevent nanorods formation. In addition, electrochemical measurements demonstrate the abundancy of Pd{100} surface facets at a macroscopic level, in line with information inferred from TEM analysis. Quantum density functional theory calculations indicate that the kinetic origin of cubic Pd nanoshapes is facet-selective Pd reduction/deposition on Pd(111). Moreover, we underline both from an experimental and theoretical point of view that bromide alone does not induce nanocube formation without the synergy with formic acid. The superior performance of these highly controlled nanoparticles to perform the catalytic reduction of 4-nitrophenol was proved: polymer-free and surfactant-free Pd nanocubes outperform state-of-the-art materials by a factor >6 and a commercial Pd/C catalyst by more than one order of magnitude.

Validation of diabetes mellitus and hypertension diagnosis in computerized medical records in primary health care.

BACKGROUND: Computerized Clinical Records, which are incorporated in primary health care practice, have great potential for research. In order to use this information, data quality and reliability must be assessed to prevent compromising the validity of the results.The aim of this study is to validate the diagnosis of hypertension and diabetes mellitus in the computerized clinical records of primary health care, taking the diagnosis criteria established in the most prominently used clinical guidelines as the gold standard against which what measure the sensitivity, specificity, and determine the predictive values.The gold standard for diabetes mellitus was the diagnostic criteria established in 2003 American Diabetes Association Consensus Statement for diabetic subjects. The gold standard for hypertension was the diagnostic criteria established in the Joint National Committee published in 2003. METHODS: A cross-sectional multicentre validation study of diabetes mellitus and hypertension diagnoses in computerized clinical records of primary health care was carried out. Diagnostic criteria from the most prominently clinical practice guidelines were considered for standard reference.Sensitivity, specificity, positive and negative predictive values, and global agreement (with kappa index), were calculated. Results were shown overall and stratified by sex and age groups. RESULTS: The agreement for diabetes mellitus with the reference standard as determined by the guideline was almost perfect (κ=0.990), with a sensitivity of 99.53%, a specificity of 99.49%, a positive predictive value of 91.23% and a negative predictive value of 99.98%.Hypertension diagnosis showed substantial agreement with the reference standard as determined by the guideline (κ=0.778), the sensitivity was 85.22%, the specificity 96.95%, the positive predictive value 85.24%, and the negative predictive value was 96.95%. Sensitivity results were worse in patients who also had diabetes and in those aged 70 years or over. CONCLUSIONS: Our results substantiate the validity of using diagnoses of diabetes and hypertension found within the computerized clinical records for epidemiologic studies.

Effectiveness of PRECEDE model for health education on changes and level of control of HbA1c, blood pressure, lipids, and body mass index in patients with type 2 diabetes mellitus.

BACKGROUND: Individual health education is considered to be essential in the overall care of patients with type 2 diabetes (DM2), although there is some uncertainty regarding its metabolic control benefits. There have been very few randomized studies on the effects of individual education on normal care in DM2 patients with a control group, and none of these have assessed the long-term results. Therefore, this study aims to use this design to assess the effectiveness of the PRECEDE (Predisposing, Reinforcing, Enabling, Causes in Educational Diagnosis, and Evaluation) education model in the metabolic control and the reduction of cardiovascular risk factors, in patients with type 2 diabetes. METHODS: An open community effectiveness study was carried out in 8 urban community health centers in the North-East Madrid Urban Area (Spain). Six hundred patients with DM2 were randomized in two groups: PRECEDE or conventional model for health promotion education. The main outcome measures were glycated hemoglobin A1c, body mass index (BMI), blood pressure, lipids and control criteria during the 2-year follow-up period. RESULTS: Glycated hemoglobin A1c and systolic blood pressure (SBP) levels decreased significantly in the PRECEDE group (multivariate analysis of covariance, with baseline glycated hemoglobin A1c, SBP, and variables showing statistically significant differences between groups at baseline visits). The decrease levels in diastolic blood pressure (DBP), triglycerides and LDL cholesterol were nonsignificant. PRECEDE increased compliance in all control criteria, except for LDL cholesterol. BMI did not change during the study in either of the two models analyzed. CONCLUSIONS: PRECEDE health education model is a useful method in the overall treatment in patients with type 2 diabetes, which contributes to decrease glycated hemoglobin A1c and SBP levels and increase the compliance in all the control criteria, except for LDL cholesterol. TRIAL REGISTRATION NUMBER: ClinicalTrials.gov NCT01316367.

[Evaluation of hand hygiene compliance in a Primary Health Care area of Madrid]. / Evaluación del cumplimiento de higiene de las manos en un área de atención primaria de Madrid.

INTRODUCTION: Hand hygiene is the most effective measure for preventing infections related to healthcare. This study aims to evaluate the Hand hygiene compliance in Primary Health Care. METHODS: A cross-sectional study was carried out, collecting socio-demographic data and the hand hygiene compliance from 198 Primary Health Care workers. Their hand hygiene compliance was evaluated according to WHO criteria. RESULTS: The level of hand hygiene compliance was 8.1% (95% CI 6.2-10.1). Employment experience of over 20 years was significantly associated with low levels of compliance. CONCLUSION: Primary Health Care workers have a low hand hygiene compliance. Training programs need to be introduced to increase compliance and facilitate access to hydro-alcoholic solutions.