RESUMEN
Minimal understanding of the formation mechanism and structure of polydopamine (pDA) and its natural analogue, eumelanin, impedes the practical application of these versatile polymers and limits our knowledge of the origin of melanoma. The lack of conclusive structural evidence stems from the insolubility of these materials, which has spawned significantly diverse suggestions of pDA's structure in the literature. We discovered that pDA is soluble in certain ionic liquids. Using these ionic liquids (ILs) as solvents, we present an experimental methodology to solvate pDA, enabling us to identify pDA's chemical structure. The resolved pDA structure consists of self-assembled supramolecular aggregates that contribute to the increasing complexity of the polymer. The underlying molecular energetics of pDA solvation and a macroscopic picture of the disruption of the aggregates using IL solvents have been investigated, along with studies of the aggregation mechanism in water.
RESUMEN
The regulation of water content in polymeric membranes is important in a number of applications, such as reverse electrodialysis and proton-exchange fuel-cell membranes. External thermal and water management systems add both mass and size to systems, and so intrinsic mechanisms of retaining water and maintaining ionic transport in such membranes are particularly important for applications where small system size is important. For example, in proton-exchange membrane fuel cells, where water retention in the membrane is crucial for efficient transport of hydrated ions, by operating the cells at higher temperatures without external humidification, the membrane is self-humidified with water generated by electrochemical reactions. Here we report an alternative solution that does not rely on external regulation of water supply or high temperatures. Water content in hydrocarbon polymer membranes is regulated through nanometre-scale cracks ('nanocracks') in a hydrophobic surface coating. These cracks work as nanoscale valves to retard water desorption and to maintain ion conductivity in the membrane on dehumidification. Hydrocarbon fuel-cell membranes with surface nanocrack coatings operated at intermediate temperatures show improved electrochemical performance, and coated reverse-electrodialysis membranes show enhanced ionic selectivity with low bulk resistance.
Asunto(s)
Membranas Artificiales , Nanotecnología , Polímeros/química , Agua/análisis , Materiales Biomiméticos/química , Biomimética , Cactaceae/metabolismo , Desecación , Diálisis , Electroquímica , Humedad , Interacciones Hidrofóbicas e Hidrofílicas , Estomas de Plantas/metabolismo , Protones , Propiedades de Superficie , TemperaturaRESUMEN
Biological ion channels have remarkable ion selectivity, permeability and rectification properties, but it is challenging to develop artificial analogues. Here, we report a metal-organic framework-based subnanochannel (MOFSNC) with heterogeneous structure and surface chemistry to achieve these properties. The asymmetrically structured MOFSNC can rapidly conduct K+, Na+ and Li+ in the subnanometre-to-nanometre channel direction, with conductivities up to three orders of magnitude higher than those of Ca2+ and Mg2+, equivalent to a mono/divalent ion selectivity of 103. Moreover, by varying the pH from 3 to 8 the ion selectivity can be tuned further by a factor of 102 to 104. Theoretical simulations indicate that ion-carboxyl interactions substantially reduce the energy barrier for monovalent cations to pass through the MOFSNC, and thus lead to ultrahigh ion selectivity. These findings suggest ways to develop ion selective devices for efficient ion separation, energy reservation and power generation.
Asunto(s)
Estructuras Metalorgánicas , Metales/química , Nanoestructuras/química , Cationes Monovalentes , Conductividad Eléctrica , HumanosRESUMEN
The fabrication of oriented, crystalline films of metal-organic frameworks (MOFs) is a critical step toward their application to advanced technologies such as optics, microelectronics, microfluidics and sensing. However, the direct synthesis of MOF films with controlled crystalline orientation remains a significant challenge. Here we report a one-step approach, carried out under mild conditions, that exploits heteroepitaxial growth for the rapid fabrication of oriented polycrystalline MOF films on the centimetre scale. Our methodology employs crystalline copper hydroxide as a substrate and yields MOF films with oriented pore channels on scales that primarily depend on the dimensions of the substrate. To demonstrate that an anisotropic crystalline morphology can translate to a functional property, we assembled a centimetre-scale MOF film in the presence of a dye and showed that the optical response could be switched 'ON' or 'OFF' by simply rotating the film.
Asunto(s)
Estructuras Metalorgánicas/química , Anisotropía , Compuestos Inorgánicos/química , Modelos Moleculares , Conformación Molecular , Nanotubos/química , PorosidadRESUMEN
Optical quality metal organic framework (MOF) thin films were integrated, for the first time, to the best of our knowledge, with structured optical fiber substrates to develop MOF-fiber sensors. The MOF-fiber structure, UiO-66 (Zr-based MOF is well known for its water stability), is a thin film that acts as an effective analyte collector. This provided a Fabry-Perot sensor in which concentrations of up to 15 mM Rhodamine-B were detected via wavelength shifts in the interference spectrum.
Asunto(s)
Interferometría/instrumentación , Fibras Ópticas , Compuestos Organometálicos/química , Contaminantes Químicos del Agua/análisis , Agua/química , Circonio/químicaRESUMEN
Adsorbents for CO2 capture need to demonstrate efficient release. Light-induced swing adsorption (LISA) is an attractive new method to release captured CO2 that utilizes solar energy rather than electricity. MOFs, which can be tailored for use in LISA owing to their chemical functionality, are often unstable in moist atmospheres, precluding their use. A MOF is used that can release large quantities of CO2 via LISA and is resistant to moisture across a large pH range. PCN-250 undergoes LISA, with UV flux regulating the CO2 desorption capacity. Furthermore, under UV light, the azo residues within PCN-250 have constrained, local, structural flexibility. This is dynamic, rapidly switching back to the native state. Reusability tests demonstrate a 7.3 % and 4.9 % loss in both adsorption and LISA capacity after exposure to water for five cycles. These minimal changes confirm the structural robustness of PCN-250 and its great potential for triggered release applications.
RESUMEN
A critical materials challenge over the next quarter century is the sustainable use and management of the world's natural resources, particularly the scarcest of them. Chemistry's ability to get more from less is epitomized by porous coordination polymers, also known as metal-organic frameworks (MOFs), which use a minimum amount of material to build maximum surface areas with fine control over pore size. Their large specific surface area and tunable porosity make MOFs useful for applications including small-molecule sensing, separation, catalysis, and storage and release of molecules of interest. Proof-of-concept projects have demonstrated their potential for environmental applications such as carbon separation and capture, water purification, carcinogen sequestration, byproduct separation, and resource recovery. To translate these from the laboratory into devices for actual use, however, will require synthesis of MOFs with new functionality and structure. This Account summarizes recent progress in the use of nano- and microparticles to control the function, location, and 3D structure of MOFs during MOF self-assembly, creating novel, hybrid, multifunctional, ultraporous materials as a first step towards creating MOF-based devices. The use of preformed ceramic, metallic, semiconductive, or polymeric particles allows the particle preparation process to be completely independent of the MOF synthesis, incorporating nucleating, luminescent, magnetic, catalytic, or templating particles into the MOF structure. We discuss success in combining functional nanoparticles and porous crystals for applications including molecular sieve detectors, repositionable and highly sensitive sensors, pollutant-sequestering materials, microfluidic microcarriers, drug-delivery materials, separators, and size-selective catalysts. In sections within the Account, we describe how functional particles can be used for (1) heterogeneous nucleation (seeding) of MOFs, (2) preparation of framework composites with novel properties, (3) MOF positioning on a substrate (patterning), and (4) synthesis of MOFs with novel architectures.
RESUMEN
Positron annihilation lifetime spectroscopy (PALS) has been shown to be highly sensitive to conformational, structural and microenvironmental transformations arising from subtle geometric changes in molecular geometry in self-assembling biomimetic systems. The ortho-positronium (oPs) may be considered an active probe that can provide information on intrinsic packing and mobility within low molecular weight solids, viscous liquids, and soft matter systems. In this perspective we provide a critical overview of the literature in this field, including the evolution of analysis software and experimental protocols with commentary upon the practical utility of PALS. In particular, we discuss how PALS can provide unique insight into the macroscopic transport properties of several porous biomembrane-like nanostructures and suggest how this insight may provide information on the release of drugs from these matrices to aid in developing therapeutic interventions. We discuss the potentially exciting and fruitful application of this technique to membrane dynamics, diffusion and permeability. We propose that PALS can provide novel molecular level information that is complementary to conventional characterisation techniques.
Asunto(s)
Materiales Biomiméticos/química , Sondas Moleculares/química , 1,2-Dipalmitoilfosfatidilcolina/química , Materiales Biomiméticos/metabolismo , Colesterol/química , Fluidez de la Membrana , Sondas Moleculares/metabolismo , Nanoestructuras/química , Reología , Temperatura , Agua/químicaRESUMEN
Self-assembled amphiphile nanostructures of colloidal dimensions such as cubosomes and hexosomes are of interest as delivery vectors in pharmaceutical and nanomedicine applications. Translation would be assisted through a better of understanding of the effects of drug loading on the internal nanostructure, and the relationship between this nanostructure and drug release profile. Positron annihilation lifetime spectroscopy (PALS) is sensitive to local microviscosity and is used as an in situ molecular probe to examine the Q2 (cubosome) â H2 (hexosome) â L2 phase transitions of the pharmaceutically relevant phytantriol-water system in the presence of a model hydrophobic drug, vitamin E acetate (VitEA). It is shown that the ortho-positronium lifetime (τ) is sensitive to molecular packing and mobility and this has been correlated with the rheological properties of individual lyotropic liquid crystalline mesophases. Characteristic PALS lifetimes for L2 (τ4â¼ 4 ns) â¼ H2 (τ4â¼ 4 ns) > Q(2 Pn3m) (τ4â¼ 2.2 ns) are observed for the phytantriol-water system, with the addition of VitEA yielding a gradual increase in τ from τâ¼ 2.2 ns for cubosomes to τâ¼ 3.5 ns for hexosomes. The dynamic chain packing at higher temperatures and in the L2 and H2 phases is qualitatively less "viscous", consistent with rheological measurements. This information offers increased understanding of the relationship between internal nanostructure and species permeability.
Asunto(s)
Alcoholes Grasos/química , Nanoestructuras/química , Análisis Espectral , Química Farmacéutica , Coloides , Microscopía Electrónica de Transmisión , Modelos Biológicos , Estructura Molecular , Tamaño de la PartículaRESUMEN
Lipid lamellar mesophases and their colloidal dispersions (liposomes) are increasingly being deployed in vivo as drug delivery vehicles, and also as models of biological membranes in fundamental biophysics studies. The permeability and diffusion of small molecules such as drugs is accommodated by a change in local curvature and molecular packing (mesophase behaviour) of the bilayer membrane molecules. Positron annihilation lifetime spectroscopy (PALS) is capable of providing in situ molecular level information on changes in free volume and void space arising from such changes in a non-perturbative manner. In this work PALS was used to systematically characterise the temperature-induced melting transitions (Tm) of saturated and unsaturated phospholipid-water systems while systematically varying lipid chain length, as both bulk lamellar mesophase and as aqueous colloidal dispersions (liposomes). A four-component fit of the data was used that provides separate PALS lifetimes for the aqueous (τ3) and organic domains (τ4). The oPs lifetime (τ4), for the lamellar phases of DSPC (C18:0), DPPC (C16:0), DMPC (C14:0) and DLPC (C12:0) was found to be independent of chain length, with characteristic lifetime value τ4 â¼ 3.4 ns. τ4 is consistently larger in the dispersed liposomes compared to the bulk mesophases, suggesting that the hydrocarbon chains are more mobile. The use of contemporary and consistent analytical approaches as described in this study is the key to future deployment of PALS to interrogate the in situ influence of drugs on membrane and cellular microenvironments.
Asunto(s)
Liposomas/química , Cristales Líquidos/química , Fosfolípidos/química , Electrones , Hidrocarburos/química , Membrana Dobles de Lípidos/química , Permeabilidad , Transición de Fase , Análisis Espectral , Temperatura de TransiciónRESUMEN
Metal organic frameworks (MOFs) offer the highest surface areas per gram of any known material. As such, they epitomise resource productivity in uses where specific surface area is critical, such as adsorption, storage, filtration and catalysis. However, the ability to control the position of MOFs is also crucial for their use in devices for applications such as sensing, delivery, sequestration, molecular transport, electronics, energy production, optics, bioreactors and catalysis. In this review we present the current technologies that enable the precise positioning of MOFs onto different platforms. Methods for permanent localisation, dynamic localisation, and spatial control of functional materials within MOF crystals are described. Finally, examples of devices in which the control of MOF position and functionalisation will play a major technological role are presented.
RESUMEN
Porosity loss, also known as physical aging, in glassy polymers hampers their long term use in gas separations. Unprecedented interactions of porous aromatic frameworks (PAFs) with these polymers offer the potential to control and exploit physical aging for drastically enhanced separation efficiency. PAF-1 is used in the archetypal polymer of intrinsic microporosity (PIM), PIM-1, to achieve three significant outcomes. 1) hydrogen permeability is drastically enhanced by 375% to 5500 Barrer. 2) Physical aging is controlled causing the selectivity for H2 over N2 to increase from 4.5 to 13 over 400 days of aging. 3) The improvement with age of the membrane is exploited to recover up to 98% of H2 from gas mixtures with N2 . This process is critical for the use of ammonia as a H2 storage medium. The tethering of polymer side chains within PAF-1 pores is responsible for maintaining H2 transport pathways, whilst the larger N2 pathways gradually collapse.
RESUMEN
The present study reports the synthesis of spray-coated cross-linked polyelectrolyte multilayer membranes. Membrane cross-linking was performed using alkyne-azide "click" chemistry, where alkyne and azide functional groups were used to modify the poly(acrylic acid) (PAA) and the poly(allylamine) hydrochloride (PAH) polyelectrolytes. The results demonstrate that deposition at lower ionic strength produced smoother and denser membrane structures. Pore size analysis using neutral poly(ethylene glycol) revealed a decrease in the membrane pore size as the degree of cross-linking was increased, resulting in the membrane rejecting divalent CaCl2 at levels of up to 80%, and 50% rejection of monovalent NaCl. When poly(sodium-4-styrenesulfonate) (PSS) was combined with small amounts of cross-linkable PAA, significant flux increases were observed in the multilayer membranes with no observable reduction in ion rejection.
RESUMEN
Cross-linked poly(ethylene glycol) diacrylate (PEGDA) hydrogels with uniformly controlled nanoporous structures templated from hexagonal lyotropic liquid crystals (LLC) represent separation membrane materials with potentially high permeability and selectivity due to their high pore density and narrow pore size distribution. However, retaining LLC templated nanostructures is a challenge as the polymer gels are not strong enough to sustain the surface tension during the drying process. In the current study, cross-linked PEGDA gels were reinforced with a silica network synthesized via an in situ sol-gel method, which assists in the retention of the hexagonal LLC structure. The silica precursor does not obstruct the formation of hexagonal phases. After surfactant removal and drying, these hexagonal structures in samples with a certain amount of tetraethoxysilane (TEOS) loading are well retained while the nanostructures are collapsed in samples without silica reinforcement, leading to the hypothesis that the reinforcement provided by the silica network stabilizes the LLC structure. The study examines the conditions necessary for a sufficient and well dispersed silica network in PEGDA gels that contributes to the retention of original LLC structures, which potentially enables broad applications of these gels as biomedical and membrane materials.
Asunto(s)
Reactivos de Enlaces Cruzados/química , Hidrogeles/química , Cristales Líquidos/química , Polietilenglicoles/química , Gel de Sílice/química , Nanoestructuras/química , Silanos/química , Tensión Superficial , Tensoactivos/químicaRESUMEN
The selectivity and rebinding capacity of molecularly imprinted polymers selective for propranolol (1) using the room temperature ionic liquids [BMIM][BF4], [BMIM][PF6], [HMIM][PF6] and [OMIM][PF6] and CHCl3 were examined. The observed IF (imprinting factor) values for MIPBF4, MIPPF6 and MIPCHCl3 were 1.0, 1.98 and 4.64, respectively. The longer chain HMIM and OMIM systems returned lower IF values of 1.1 and 2.3, respectively. MIPPF6 also showed a 25% binding capacity reduction vs. MIPCHCl3 (5 µmol g(−1)vs. 7 µmol g(−1) respectively). MIPCHCl3 and MIPPF6 differed in terms of BET surface area (306 m(2) g(−1)vs. 185 m(2) g(−1)), pore size (1.10 and 2.19 nm vs. 0.97 and 7.06 nm), the relative number of pores (Type A: 10.4 vs. 7.5%; Type B: 8.5 vs. 3.0%), and surface zeta potential (−37.9 mV vs. −20.3 mV). The MIP specificity for 1 was examined by selective rebinding studies with caffeine (2) and ephedrine (3). MIPPF6 rebound higher quantities of 2 than MIPCHCl3, but this was largely due to non-specific binding. Both MIPCHCl3 and MIPPF6 showed a higher affinity for 3 than for 2. Reduction in the Room Temperature Ionic Liquid (RTIL) porogen volume had little impact on the polymer morphology, but did result in a modest decrease in IF from 2.6 to 2.3 and in the binding capacity (30% to 19%). MIPCHCl3 retained the highest template specificity on rebinding from CHCl3 (IF = 4.6) dropping to IF = 0.6 in MeOH/[BMIM][PF6]. The MIPCHCl3 binding capacity remained constant using CHCl3, CH2Cl2 and MeOH (4652%), dropped to 6% on addition of [BMIM][PF6] and increased to 83% in H2O (but at the expense of specificity with IFH2O = 1.4). MIPPF6 rebinding from MeOH saw an increase in specific rebinding to IF = 4.9 and also an increase in binding capacity to 48% when rebinding 1 from MeOH and to 42% and 45% with H2O and CH2Cl2, respectively, although in the latter case the increased capacity was at the cost of specificity with IFCH2Cl2 = 1.2. Overall the MIPPF6 capacity and specificity were enhanced on addition of MeOH.
RESUMEN
Aging in super glassy polymers such as poly(trimethylsilylpropyne) (PTMSP), poly(4-methyl-2-pentyne) (PMP), and polymers with intrinsic microporosity (PIM-1) reduces gas permeabilities and limits their application as gas-separation membranes. While super glassy polymers are initially very porous, and ultra-permeable, they quickly pack into a denser phase becoming less porous and permeable. This age-old problem has been solved by adding an ultraporous additive that maintains the low density, porous, initial stage of super glassy polymers through absorbing a portion of the polymer chains within its pores thereby holding the chains in their open position. This result is the first time that aging in super glassy polymers is inhibited whilst maintaining enhanced CO2 permeability for one year and improving CO2/N2 selectivity. This approach could allow super glassy polymers to be revisited for commercial application in gas separations.
RESUMEN
Mixed matrix materials (MMMs) containing metal-organic framework (MOF) nanoparticles are attractive for membrane carbon capture. Particularly, adding <5 mass % MOFs in polymers dramatically increased gas permeability, far surpassing the Maxwell model's prediction. However, no sound mechanisms have been offered to explain this unusual low-loading phenomenon. Herein, we design an ideal series of MMMs containing polyethers (one of the leading polymers for CO2/N2 separation) and discrete metal-organic polyhedra (MOPs) with cage sizes of 2-5 nm. Adding 3 mass % MOP-3 in a polyether increases the CO2 permeability by 100% from 510 to 1000 Barrer at 35 °C because of the increased gas diffusivity. No discernible changes in typical physical properties governing gas transport properties are detected, such as glass transition temperature, fractional free volume, d-spacing, etc. We hypothesize that this behavior is attributed to fractal-like networks formed by highly porous MOPs, and for the first time, we validate this hypothesis using small-angle X-ray scattering analysis.
RESUMEN
Microchannels are fabricated using a photosensitive polymer to which microporosity is tuned with different X-ray doses. Using hard X-ray irradiation, the micropattern is positioned with various geometries in a multi-level, three-dimensional structure, while controlling the pore size and transport properties of small molecules. This highly reliable fabrication process has potential for use in microfluidic devices with enhanced transport properties through microchannels.
RESUMEN
The metal-organic framework beryllium benzene tribenzoate (Be-BTB) has recently been reported to have one of the highest gravimetric hydrogen uptakes at room temperature. Storage at room temperature is one of the key requirements for the practical viability of hydrogen-powered vehicles. Be-BTB has an exceptional 298 K storage capacity of 2.3 wt % hydrogen. This result is surprising given that the low adsorption enthalpy of 5.5 kJ mol(-1). In this work, a combination of atomistic simulation and continuum modeling reveals that the beryllium rings contribute strongly to the hydrogen interaction with the framework. These simulations are extended with a thermodynamic energy optimization (TEO) model to compare the performance of Be-BTB to a compressed H2 tank and benchmark materials MOF-5 and MOF-177 in a MOF-based fuel cell. Our investigation shows that none of the MOF-filled tanks satisfy the United States Department of Energy (DOE) storage targets within the required operating temperatures and pressures. However, the Be-BTB tank delivers the most energy per volume and mass compared to the other material-based storage tanks. The pore size and the framework mass are shown to be contributing factors responsible for the superior room temperature hydrogen adsorption of Be-BTB.
Asunto(s)
Benceno/química , Benzoatos/química , Berilio/química , Hidrógeno/química , Compuestos Organometálicos/química , TemperaturaRESUMEN
The volumetric hydrogen capacity remains one of the most challenging criteria for on-board hydrogen storage system requirements. Here a new concept for hydrogen storage of porous aromatic frameworks (PAFs) impregnated with lithium-decorated fullerenes (Li6C60) is described. The loading of Li6C60 and the effect on the adsorption of hydrogen (H2) has been investigated by molecular simulation. It is shown that the incorporation of Li6C60 can enhance the volumetric capacity of H2 from 12 to 44 g L(-1), a 260% increase at 10 bar and 77 K. The impregnation of Li6C60 increases the heat of adsorption and surface area at the cost of the available pore volume. However, the increase in adsorbed hydrogen outweighs any pore volume loss under optimized Li6C60 loading and operating conditions. In addition, the H2 volumetric uptake is shown to correlate with the volumetric surface area at all pressures whereas the H2 gravimetric uptake correlates with the heat of adsorption at low pressures, surface area at moderate pressures, and pore volume at high pressures.