High-temperature bulk metallic glasses developed by combinatorial methods.

Since their discovery in 19601, metallic glasses based on a wide range of elements have been developed2. However, the theoretical prediction of glass-forming compositions is challenging and the discovery of alloys with specific properties has so far largely been the result of trial and error3-8. Bulk metallic glasses can exhibit strength and elasticity surpassing those of conventional structural alloys9-11, but the mechanical properties of these glasses are critically dependent on the glass transition temperature. At temperatures approaching the glass transition, bulk metallic glasses undergo plastic flow, resulting in a substantial decrease in quasi-static strength. Bulk metallic glasses with glass transition temperatures greater than 1,000 kelvin have been developed, but the supercooled liquid region (between the glass transition and the crystallization temperature) is narrow, resulting in very little thermoplastic formability, which limits their practical applicability. Here we report the design of iridium/nickel/tantalum metallic glasses (and others also containing boron) with a glass transition temperature of up to 1,162 kelvin and a supercooled liquid region of 136 kelvin that is wider than that of most existing metallic glasses12. Our Ir-Ni-Ta-(B) glasses exhibit high strength at high temperatures compared to existing alloys: 3.7 gigapascals at 1,000 kelvin9,13. Their glass-forming ability is characterized by a critical casting thickness of three millimetres, suggesting that small-scale components for applications at high temperatures or in harsh environments can readily be obtained by thermoplastic forming14. To identify alloys of interest, we used a simplified combinatorial approach6-8 harnessing a previously reported correlation between glass-forming ability and electrical resistivity15-17. This method is non-destructive, allowing subsequent testing of a range of physical properties on the same library of samples. The practicality of our design and discovery approach, exemplified by the identification of high-strength, high-temperature bulk metallic glasses, bodes well for enabling the discovery of other glassy alloys with exciting properties.

Ultrastrong steel via minimal lattice misfit and high-density nanoprecipitation.

Next-generation high-performance structural materials are required for lightweight design strategies and advanced energy applications. Maraging steels, combining a martensite matrix with nanoprecipitates, are a class of high-strength materials with the potential for matching these demands. Their outstanding strength originates from semi-coherent precipitates, which unavoidably exhibit a heterogeneous distribution that creates large coherency strains, which in turn may promote crack initiation under load. Here we report a counterintuitive strategy for the design of ultrastrong steel alloys by high-density nanoprecipitation with minimal lattice misfit. We found that these highly dispersed, fully coherent precipitates (that is, the crystal lattice of the precipitates is almost the same as that of the surrounding matrix), showing very low lattice misfit with the matrix and high anti-phase boundary energy, strengthen alloys without sacrificing ductility. Such low lattice misfit (0.03 ± 0.04 per cent) decreases the nucleation barrier for precipitation, thus enabling and stabilizing nanoprecipitates with an extremely high number density (more than 1024 per cubic metre) and small size (about 2.7 ± 0.2 nanometres). The minimized elastic misfit strain around the particles does not contribute much to the dislocation interaction, which is typically needed for strength increase. Instead, our strengthening mechanism exploits the chemical ordering effect that creates backstresses (the forces opposing deformation) when precipitates are cut by dislocations. We create a class of steels, strengthened by Ni(Al,Fe) precipitates, with a strength of up to 2.2 gigapascals and good ductility (about 8.2 per cent). The chemical composition of the precipitates enables a substantial reduction in cost compared to conventional maraging steels owing to the replacement of the essential but high-cost alloying elements cobalt and titanium with inexpensive and lightweight aluminium. Strengthening of this class of steel alloy is based on minimal lattice misfit to achieve maximal precipitate dispersion and high cutting stress (the stress required for dislocations to cut through coherent precipitates and thus produce plastic deformation), and we envisage that this lattice misfit design concept may be applied to many other metallic alloys.

Dealloying Kinetics of AgAu Nanoparticles by In Situ Liquid-Cell Scanning Transmission Electron Microscopy.

Understanding the formation and evolution of bicontinuous nanoporous structure during dealloying has been one of the most challenging subjects of dealloying research. However, previous in situ investigations either suffer from insufficient spatial resolution (e.g., X-ray tomography) or lack morphology visualization and mass information (e.g., scanning tunneling microscopy). In this work, we report the kinetics of the whole course of dealloying by utilizing liquid-cell aberration-corrected scanning transmission electron microscopy. With Z-contrast imaging analysis, the in situ sub-nanoscale characterization reveals two new phenomena, an initial period of dealloying indicative of an initial length scale for bulk dealloying and a large volume shrinkage in a nanoscale alloy precursor. We explain the particle-size-dependent volume shrinkage with the formation of a dense shell and quantify the dependence with a simple geometric model. These insights into the mechanisms of dealloying will enable deliberate designs of nanoporous structures.

Hierarchical structures of amorphous solids characterized by persistent homology.

This article proposes a topological method that extracts hierarchical structures of various amorphous solids. The method is based on the persistence diagram (PD), a mathematical tool for capturing shapes of multiscale data. The input to the PDs is given by an atomic configuration and the output is expressed as 2D histograms. Then, specific distributions such as curves and islands in the PDs identify meaningful shape characteristics of the atomic configuration. Although the method can be applied to a wide variety of disordered systems, it is applied here to silica glass, the Lennard-Jones system, and Cu-Zr metallic glass as standard examples of continuous random network and random packing structures. In silica glass, the method classified the atomic rings as short-range and medium-range orders and unveiled hierarchical ring structures among them. These detailed geometric characterizations clarified a real space origin of the first sharp diffraction peak and also indicated that PDs contain information on elastic response. Even in the Lennard-Jones system and Cu-Zr metallic glass, the hierarchical structures in the atomic configurations were derived in a similar way using PDs, although the glass structures and properties substantially differ from silica glass. These results suggest that the PDs provide a unified method that extracts greater depth of geometric information in amorphous solids than conventional methods.

Heavily Doped and Highly Conductive Hierarchical Nanoporous Graphene for Electrochemical Hydrogen Production.

Heavy chemical doping and high electrical conductivity are two key factors for metal-free graphene electrocatalysts to realize superior catalytic performance toward hydrogen evolution. However, heavy chemical doping usually leads to the reduction of electrical conductivity because the catalytically active dopants give rise to additional electron scattering and hence increased electrical resistance. A hierarchical nanoporous graphene, which is comprised of heavily chemical doped domains and a highly conductive pure graphene substrate, is reported. The hierarchical nanoporous graphene can host a remarkably high concentration of N and S dopants up to 9.0 at % without sacrificing the excellent electrical conductivity of graphene. The combination of heavy chemical doping and high conductivity results in high catalytic activity toward electrochemical hydrogen production. This study has an important implication in developing multi-functional electrocatalysts by 3D nanoarchitecture design.

Formation and Characterization of Hydrogen Boride Sheets Derived from MgB2 by Cation Exchange.

Two-dimensional (2D) materials are promising for applications in a wide range of fields because of their unique properties. Hydrogen boride sheets, a new 2D material recently predicted from theory, exhibit intriguing electronic and mechanical properties as well as hydrogen storage capacity. Here, we report the experimental realization of 2D hydrogen boride sheets with an empirical formula of H1B1, produced by exfoliation and complete ion-exchange between protons and magnesium cations in magnesium diboride (MgB2) with an average yield of 42.3% at room temperature. The sheets feature an sp2-bonded boron planar structure without any long-range order. A hexagonal boron network with bridge hydrogens is suggested as the possible local structure, where the absence of long-range order was ascribed to the presence of three different anisotropic domains originating from the 2-fold symmetry of the hydrogen positions against the 6-fold symmetry of the boron networks, based on X-ray diffraction, X-ray atomic pair distribution functions, electron diffraction, transmission electron microscopy, photo absorption, core-level binding energy data, infrared absorption, electron energy loss spectroscopy, and density functional theory calculations. The established cation-exchange method for metal diboride opens new avenues for the mass production of several types of boron-based 2D materials by countercation selection and functionalization.

Correlation between Local Structure Order and Spatial Heterogeneity in a Metallic Glass.

Although nanoscale spatial heterogeneity of metallic glasses has been demonstrated by extensive experimental and theoretical investigations, the nature of spatial heterogeneity remains poorly known owing to the absence of a structural depiction of the inhomogeneity from experimental insight. Here we report the experimental characterization of the spatial heterogeneity of a metallic glass by utilizing state-of-the-art angstrom-beam electron diffraction and scanning transmission electron microscopy. The subnanoscale electron diffraction reveals that the nanoscale spatial heterogeneity and corresponding density fluctuation have a close correlation with the local structure variation from icosahedronlike to tetragonal crystal-like order. The structural insights of spatial heterogeneity have important implications in understanding the properties and dynamics of metallic glasses.

Persistent homology and many-body atomic structure for medium-range order in the glass.

The characterization of the medium-range (MRO) order in amorphous materials and its relation to the short-range order is discussed. A new topological approach to extract a hierarchical structure of amorphous materials is presented, which is robust against small perturbations and allows us to distinguish it from periodic or random configurations. This method is called the persistence diagram (PD) and introduces scales to many-body atomic structures to facilitate size and shape characterization. We first illustrate the representation of perfect crystalline and random structures in PDs. Then, the MRO in amorphous silica is characterized using the appropriate PD. The PD approach compresses the size of the data set significantly, to much smaller geometrical summaries, and has considerable potential for application to a wide range of materials, including complex molecular liquids, granular materials, and metallic glasses.

Broadband dielectric spectroscopy of glucose aqueous solution: Analysis of the hydration state and the hydrogen bond network.

Recent studies of saccharides' peculiar anti-freezing and anti-dehydration properties point to a close association with their strong hydration capability and destructuring effect on the hydrogen bond (HB) network of bulk water. The underlying mechanisms are, however, not well understood. In this respect, examination of the complex dielectric constants of saccharide aqueous solutions, especially over a broadband frequency region, should provide interesting insights into these properties, since the dielectric responses reflect corresponding dynamics over the time scales measured. In order to do this, the complex dielectric constants of glucose solutions between 0.5 GHz and 12 THz (from the microwave to the far-infrared region) were measured. We then performed analysis procedures on this broadband spectrum by decomposing it into four Debye and two Lorentz functions, with particular attention being paid to the ß relaxation (glucose tumbling), δ relaxation (rotational polarization of the hydrated water), slow relaxation (reorientation of the HB network water), fast relaxation (rotation of the non-HB water), and intermolecular stretching vibration (hindered translation of water). On the basis of this analysis, we revealed that the hydrated water surrounding the glucose molecules exhibits a mono-modal relaxational dispersion with 2-3 times slower relaxation times than unperturbed bulk water and with a hydration number of around 20. Furthermore, other species of water with distorted tetrahedral HB water structures, as well as increases in the relative proportion of non-HB water molecules which have a faster relaxation time and are not a part of the surrounding bulk water HB network, was found in the vicinity of the glucose molecules. These clearly point to the HB destructuring effect of saccharide solutes in aqueous solution. The results, as a whole, provide a detailed picture of glucose-water and water-water interactions in the vicinity of the glucose molecules at various time scales from sub-picosecond to hundreds of picoseconds.

Atomic observation of catalysis-induced nanopore coarsening of nanoporous gold.

Dealloyed nanoporous metals have attracted much attention because of their excellent catalytic activities toward various chemical reactions. Nevertheless, coarsening mechanisms in these catalysts have not been experimentally studied. Here, we report in situ atomic-scale observations of the structural evolution of nanoporous gold during catalytic CO oxidation. The catalysis-induced nanopore coarsening is associated with the rapid diffusion of gold atoms at chemically active surface steps and the surface segregation of residual Ag atoms, both of which are stimulated by the chemical reaction. Our observations provide the first direct evidence that planar defects hinder nanopore coarsening, suggesting a new strategy for developing structurally stable and highly active heterogeneous catalysts.

Extraordinary Supercapacitor Performance of a Multicomponent and Mixed-Valence Oxyhydroxide.

We report a novel multicomponent mixed-valence oxyhydroxide-based electrode synthesized by electrochemical polarization of a de-alloyed nanoporous NiCuMn alloy. The multicomponent oxyhydroxide has a high specific capacitance larger than 627 F cm(-3) (1097±95 F g(-1) ) at a current density of 0.25 A cm(-3) , originating from multiple redox reactions. More importantly, the oxyhydroxide electrode possesses an extraordinarily wide working-potential window of 1.8 V in an aqueous electrolyte, which far exceeds the theoretically stable window of water. The realization of both high specific capacitance and high working-potential windows gives rise to a high energy density, 51 mWh cm(-3) , of the multicomponent oxyhydroxide-based supercapacitor for high-energy and high-power applications.

Nanoporous Graphene with Single-Atom Nickel Dopants: An Efficient and Stable Catalyst for Electrochemical Hydrogen Production.

Single-atom nickel dopants anchored to three-dimensional nanoporous graphene can be used as catalysts of the hydrogen evolution reaction (HER) in acidic solutions. In contrast to conventional nickel-based catalysts and graphene, this material shows superior HER catalysis with a low overpotential of approximately 50 mV and a Tafel slope of 45 mV dec(-1) in 0.5 M H2SO4 solution, together with excellent cycling stability. Experimental and theoretical investigations suggest that the unusual catalytic performance of this catalyst is due to sp-d orbital charge transfer between the Ni dopants and the surrounding carbon atoms. The resultant local structure with empty C-Ni hybrid orbitals is catalytically active and electrochemically stable.

CW-THz vector spectroscopy and imaging system based on 1.55-µm fiber-optics.

We present a continuous-wave terahertz (THz) vector spectroscopy and imaging system based on a 1.5-µm fiber optic uni-traveling-carrier photodiode and InGaAs photo-conductive receiver. Using electro-optic (EO) phase modulators for THz phase control with shortened optical paths, the system achieves fast vector measurement with effective phase stabilization. Dynamic ranges of 100 dB · Hz and 75 dB · Hz at 300 GHz and 1 THz, and phase stability of 1.5° per minute are obtained. With the simultaneous measurement of absorbance and relative permittivity, we demonstrate non-destructive analyses of pharmaceutical cocrystals inside tablets within a few minutes.

Compact and stable THz vector spectroscopy using silicon photonics technology.

We present a compact and stable terahertz (THz) vector spectroscopy system using silicon photonics technology. A silicon-based integrated phase control circuit greatly reduces the physical size of the continuous-wave THz spectroscopy system and enhances environmental phase stability. Differential lightwave phase control using two carrier-injection electro-optic modulators enables fast and linear phase sweeps of THz-waves. Using the silicon-photonic circuit, we demonstrate a THz vector spectrometer; the dynamic ranges are 65 and 35 dB at 300 GHz and 1 THz with 1-ms integration time and phase variation is less than ± 10° without thermal packaging.

Local structural modelling and local pair distribution function analysis for Zr-Pt metallic glass.

In disordered glass structures, the structural modelling and analyses based on local experimental data are not yet established. Here we investigate the icosahedral short-range order (SRO) in a Zr-Pt metallic glass using local structural modelling, which is a reverse Monte Carlo simulation dedicated to two-dimensional angstrom-beam electron diffraction (ABED) patterns, and local pair distribution function (PDF) analysis. The local structural modelling invariably leads to the icosahedral SRO atomic configurations that are similarly distorted by starting from some different initial configurations. Furthermore, the SRO configurations with 11-13 coordination numbers reproduce almost identical ABED patterns, indicating that these SRO structures are similar to each other. Further local PDF analysis explicitly indicates the presence of the wide distribution of atomic bond distances, which is comparable to the global PDF profile, even at the SRO level. The SRO models based on the conventional MD simulation can be strengthened by comparison with those obtained by the present local structural modelling and local PDF analysis based on the ABED data.

Atomic origins of the high catalytic activity of nanoporous gold.

Distinct from inert bulk gold, nanoparticulate gold has been found to possess remarkable catalytic activity towards oxidation reactions. The catalytic performance of nanoparticulate gold strongly depends on size and support, and catalytic activity usually cannot be observed at characteristic sizes larger than 5 nm. Interestingly, significant catalytic activity can be retained in dealloyed nanoporous gold (NPG) even when its feature lengths are larger than 30 nm. Here we report atomic insights of the NPG catalysis, characterized by spherical-aberration-corrected transmission electron microscopy (TEM) and environmental TEM. A high density of atomic steps and kinks is observed on the curved surfaces of NPG, comparable to 3-5 nm nanoparticles, which are stabilized by hyperboloid-like gold ligaments. In situ TEM observations provide compelling evidence that the surface defects are active sites for the catalytic oxidation of CO and residual Ag stabilizes the atomic steps by suppressing {111} faceting kinetics.

Direct observation of local atomic order in a metallic glass.

The determination of the atomic configuration of metallic glasses is a long-standing problem in materials science and solid-state physics. So far, only average structural information derived from diffraction and spectroscopic methods has been obtained. Although various atomic models have been proposed in the past fifty years, a direct observation of the local atomic structure in disordered materials has not been achieved. Here we report local atomic configurations of a metallic glass investigated by nanobeam electron diffraction combined with ab initio molecular dynamics simulation. Distinct diffraction patterns from individual atomic clusters and their assemblies, which have been theoretically predicted as short- and medium-range order, can be experimentally observed. This study provides compelling evidence of the local atomic order in the disordered material and has important implications in understanding the atomic mechanisms of metallic-glass formation and properties.

Unveiling a Chemisorbed Crystallographically Heterogeneous Graphene/L10-FePd Interface with a Robust and Perpendicular Orbital Moment.

A crystallographically heterogeneous interface was fabricated by growing hexagonal graphene (Gr) using chemical vapor deposition (CVD) on a tetragonal FePd epitaxial film grown by magnetron sputtering. FePd was alternately arranged with Fe and Pd in the vertical direction, and the outermost surface atom was identified primarily as Fe rather than Pd. This means that FePd has a high degree of L10-ordering, and the outermost Fe bonds to the carbon of Gr at the interface. When Gr is grown by CVD, the crystal orientation of hexagonal Gr toward tetragonal L10-FePd selects an energetically stable structure based on the van der Waals (vdW) force. The atomic relationship of Gr/L10-FePd, which is an energetically stable interface, was unveiled theoretically and experimentally. The Gr armchair axis was parallel to FePd [100]L10, where Gr was under a small strain by chemical bonding. Focusing on the interatomic distance between the Gr and FePd layers, the distance was theoretically and experimentally determined to be approximately 0.2 nm. This shorter distance (≈0.2 nm) can be explained by the chemisorption-type vdW force of strong orbital hybridization, rather than the longer distance (≈0.38 nm) of the physisorption-type vdW force. Notably, depth-resolved X-ray magnetic circular dichroism analyses revealed that the orbital magnetic moment (Ml) of Fe in FePd emerged at the Gr/FePd interface (@inner FePd: Ml = 0.16 µB → @Gr/FePd interface: Ml = 0.32 µB). This interfacially enhanced Ml showed obvious anisotropy in the perpendicular direction, which contributed to interfacial perpendicular magnetic anisotropy (IPMA). Moreover, the interfacially enhanced Ml and interfacially enhanced electron density exhibited robustness. It is considered that the shortening of the interatomic distance produces a robust high electron density at the interface, resulting in a chemisorption-type vdW force and orbital hybridization. Eventually, the robust interfacial anisotropic Ml emerged at the crystallographically heterogeneous Gr/L10-FePd interface. From a practical viewpoint, IPMA is useful because it can be incorporated into the large bulk perpendicular magnetic anisotropy (PMA) of L10-FePd. A micromagnetic simulation assuming both PMA and IPMA predicted that perpendicularly magnetized magnetic tunnel junctions (p-MTJs) using Gr/L10-FePd could realize 10-year data retention in a small recording layer with a circular diameter and thickness of 10 and 2 nm, respectively. We unveiled the energetically stable atomic structure in the crystallographically heterogeneous interface, discovered the emergence of the robust IPMA, and predicted that the Gr/L10-FePd p-MTJ is significant for high-density X nm generation magnetic random-access memory (MRAM) applications.

Local structure analysis of amorphous materials by angstrom-beam electron diffraction.

The structure analysis of amorphous materials still leaves much room for improvement. Owing to the lack of translational or rotational symmetry of amorphous materials, it is important to develop a different approach from that used for crystals for the structure analysis of amorphous materials. Here, the angstrom-beam electron diffraction method was used to obtain the local structure information of amorphous materials at a sub-nanometre scale. In addition, we discussed the relationship between the global and local diffraction intensities of amorphous structures, and verified the effectiveness of the proposed method through basic diffraction simulations. Finally, some applications of the proposed method to structural and functional amorphous materials are summarized.

Relationship between diffraction peak, network topology, and amorphous-forming ability in silicon and silica.

The network topology in disordered materials is an important structural descriptor for understanding the nature of disorder that is usually hidden in pairwise correlations. Here, we compare the covalent network topology of liquid and solidified silicon (Si) with that of silica (SiO2) on the basis of the analyses of the ring size and cavity distributions and tetrahedral order. We discover that the ring size distributions in amorphous (a)-Si are narrower and the cavity volume ratio is smaller than those in a-SiO2, which is a signature of poor amorphous-forming ability in a-Si. Moreover, a significant difference is found between the liquid topology of Si and that of SiO2. These topological features, which are reflected in diffraction patterns, explain why silica is an amorphous former, whereas it is impossible to prepare bulk a-Si. We conclude that the tetrahedral corner-sharing network of AX2, in which A is a fourfold cation and X is a twofold anion, as indicated by the first sharp diffraction peak, is an important motif for the amorphous-forming ability that can rule out a-Si as an amorphous former. This concept is consistent with the fact that an elemental material cannot form a bulk amorphous phase using melt quenching technique.