RESUMEN
The synthesis and structures of nitrile complexes of V(N[tBu]Ar)3, 2 (Ar = 3,5-Me2C6H3), are described. Thermochemical and kinetic data for their formation were determined by variable temperature Fourier transform infrared (FTIR), calorimetry, and stopped-flow techniques. The extent of back-bonding from metal to coordinated nitrile indicates that electron donation from the metal to the nitrile plays a less prominent role for 2 than for the related complex Mo(N[tBu]Ar)3, 1. Kinetic studies reveal similar rate constants for nitrile binding to 2, but the activation parameters depend critically on the nature of R in RCN. Activation enthalpies range from 2.9 to 7.2 kcal·mol-1, and activation entropies from -9 to -28 cal·mol-1·K-1 in an opposing manner. Density functional theory (DFT) calculations provide a plausible explanation supporting the formation of a π-stacking interaction between a pendant arene of the metal anilide of 2 and the arene substituent on the incoming nitrile in favorable cases. Data for ligand binding to 1 do not exhibit this range of activation parameters and are clustered in a small area centered at ΔH = 5.0 kcal·mol-1 and ΔS = -26 cal·mol-1·K-1. Computational studies are in agreement with the experimental data and indicate a stronger dependence on electronic factors associated with the change in spin state upon ligand binding to 1.
RESUMEN
The rate and mechanism of the elimination of N2O from trans-R3Sn-O-NâN-O-SnR3 (R = Ph (1Ph) and R = Cy (1Cy)) to form R3Sn-O-SnR3 (R = Ph (2Ph) and R = Cy (2Cy)) have been studied using both NMR and IR techniques to monitor the reactions in the temperature range of 39-79 °C in C6D6. Activation parameters for this reaction are ΔH⧧ = 15.8 ± 2.0 kcal·mol-1 and ΔS⧧ = -28.5 ± 5 cal·mol-1·K-1 for 1Ph and ΔH⧧ = 22.7 ± 2.5 kcal·mol-1 and ΔS⧧ = -12.4 ± 6 cal·mol-1·K-1 for 1Cy. Addition of O2, CO2, N2O, or PPh3 to sealed tube NMR experiments did not alter in a detectable way the rate or product distribution of the reactions. Computational DFT studies of elimination of hyponitrite from trans-Me3Sn-O-NâN-O-SnMe3 (1Me) yield a mechanism involving initial migration of the R3Sn group from O to N passing through a marginally stable intermediate product and subsequent N2O elimination. Reactions of 1Ph with protic acids HX are rapid and lead to formation of R3SnX and trans-H2N2O2. Reaction of 1Ph with the metal radical â¢Cr(CO)3C5Me5 at low concentrations results in rapid evolution of N2O. At higher â¢Cr(CO)3C5Me5 concentrations, evolution of CO2 rather than N2O is observed. Addition of 1 atm or less CO2 to benzene or toluene solutions of 2Ph and 2Cy resulted in very rapid reaction to form the corresponding carbonates R3Sn-O-C(âO)-O-SnR3 (R = Ph (3Ph) and R = Cy (3Cy)) at room temperature. Evacuation results in fast loss of bound CO2 and regeneration of 2Ph and 2Cy. Variable temperature data for formation of 3Cy yield ΔHo = -8.7 ± 0.6 kcal·mol-1, ΔSo = -17.1 ± 2.0 cal·mol-1·K-1, and ΔGo298K = -3.6 ± 1.2 kcal·mol-1. DFT studies were performed and provide additional insight into the energetics and mechanisms for the reactions.
RESUMEN
Reaction of [Pd(IPr)2] (IPr = 1,3-bis(2,6-diisopropylphenyl)imidazol-2-ylidene) and O2 leads to the surprising discovery that at low temperature the initial reaction product is a highly labile peroxide complex cis-[Pd(IPr)2(η2-O2)]. At temperatures â³ -40 °C, cis-[Pd(IPr)2(η2-O2)] adds a second O2 to form trans-[Pd(IPr)2(η1-O2)2]. Squid magnetometry and EPR studies yield data that are consistent with a singlet diradical ground state with a thermally accessible triplet state for this unique bis-superoxide complex. In addition to reaction with O2, cis-[Pd(IPr)2(η2-O2)] reacts at low temperature with H2O in methanol/ether solution to form trans-[Pd(IPr)2(OH)(OOH)]. The crystal structure of trans-[Pd(IPr)2(OOH)(OH)] is reported. Neither reaction with O2 nor reaction with H2O occurs under comparable conditions for cis-[Pd(IMes)2(η2-O2)] (IMes = 1,3-bis(2,4,6-trimethylphenyl)imidazol-2-ylidene). The increased reactivity of cis-[Pd(IPr)2(η2-O2)] is attributed to the enthalpy of binding of O2 to [Pd(IPr)2] (-14.5 ± 1.0 kcal/mol) that is approximately one-half that of [Pd(IMes)2] (-27.9 ± 1.5 kcal/mol). Computational studies identify the cause as interligand repulsion forcing a wider C-Pd-C angle and tilting of the NHC plane in cis-[Pd(IPr)2(η2-O2)]. Arene-arene interactions are more favorable and serve to further stabilize cis-[Pd(IMes)2(η2-O2)]. Inclusion of dispersion effects in DFT calculations leads to improved agreement between experimental and computational enthalpies of O2 binding. A complete reaction diagram is constructed for formation of trans-[Pd(IPr)2(η1-O2)2] and leads to the conclusion that kinetic factors inhibit formation of trans-[Pd(IMes)2(η1-O2)2] at the low temperatures at which it is thermodynamically favored. Failure to detect the predicted T-shaped intermediate trans-[Pd(NHC)2(η1-O2)] for either NHC = IMes or IPr is attributed to dynamic effects. A partial potential energy diagram for initial binding of O2 is constructed. A range of low-energy pathways at different angles of approach are present and blur the distinction between pure "side-on" or "end-on" trajectories for oxygen binding.
RESUMEN
The kinetics of the reaction of Ph3SnH with excess â¢Cr(CO)3C5Me5 = â¢Cr, producing HCr and Ph3Sn-Cr, was studied in toluene solution under 2-3 atm CO pressure in the temperature range of 17-43.5 °C. It was found to obey the rate equation d[Ph3Sn-Cr]/dt = k[Ph3SnH][â¢Cr] and exhibit a normal kinetic isotope effect (kH/kD = 1.12 ± 0.04). Variable-temperature studies yielded ΔH = 15.7 ± 1.5 kcal/mol and ΔS = -11 ± 5 cal/(mol·K) for the reaction. These data are interpreted in terms of a two-step mechanism involving a thermodynamically uphill hydrogen atom transfer (HAT) producing Ph3Sn⢠and HCr, followed by rapid trapping of Ph3Sn⢠by excess â¢Cr to produce Ph3Sn-Cr. Assuming an overbarrier of 2 ± 1 kcal/mol in the HAT step leads to a derived value of 76.0 ± 3.0 kcal/mol for the Ph3Sn-H bond dissociation enthalpy (BDE) in toluene solution. The reaction enthalpy of Ph3SnH with excess â¢Cr was measured by reaction calorimetry in toluene solution, and a value of the Sn-Cr BDE in Ph3Sn-Cr of 50.4 ± 3.5 kcal/mol was derived. Qualitative studies of the reactions of other R3SnH compounds with â¢Cr are described for R = nBu, tBu, and Cy. The dehydrogenation reaction of 2Ph3SnH â H2 + Ph3SnSnPh3 was found to be rapid and quantitative in the presence of catalytic amounts of the complex Pd(IPr)(P(p-tolyl)3). The thermochemistry of this process was also studied in toluene solution using varying amounts of the Pd(0) catalyst. The value of ΔH = -15.8 ± 2.2 kcal/mol yields a value of the Sn-Sn BDE in Ph3SnSnPh3 of 63.8 ± 3.7 kcal/mol. Computational studies of the Sn-H, Sn-Sn, and Sn-Cr BDEs are in good agreement with experimental data and provide additional insight into factors controlling reactivity in these systems. The structures of Ph3Sn-Cr and Cy3Sn-Cr were determined by X-ray crystallography and are reported. Mechanistic aspects of oxidative addition reactions in this system are discussed.
RESUMEN
The reaction of Pt(COD)2 with one equivalent of tri-tert-butylstannane, Bu(t)3SnH, at room temperature yields Pt(SnBu(t)3)(COD)(H)(3) in quantitative yield. In the presence of excess Bu(t)3SnH, the reaction goes further, yielding the dinuclear bridging stannylene complex [Pt(SnBu(t)3)(µ-SnBu(t)2)(H)2]2 (4). The dinuclear complex 4 reacts rapidly and reversibly with CO to furnish [Pt(SnBu(t)3)(µ-SnBu(t)2)(CO)(H)2]2 (5). Complex 3 reacts with N,N'-di-tert-butylimidazol-2-ylidene, IBu(t), at room temperature to give the dinuclear bridging hydride complex [Pt(SnBu(t)3)(IBu(t))(µ-H)]2 (6). Complex 6 reacts with CO, C2H4, and H2 to give the corresponding mononuclear Pt complexes Pt(SnBu(t)3)(IBu(t))(CO)(H)(7), Pt(SnBu(t)3)(IBu(t))(C2H4)(H)(8), and Pt(SnBu(t)3)(IBu(t))(H)3 (9), respectively. The reaction of IBu(t) with the complex Pt(SnBu(t)3)2(CO)2 (10) yielded an abnormal Pt-carbene complex Pt(SnBu(t)3)2(aIBu(t))(CO) (11). DFT computational studies of the dimeric complexes [Pt(SnR3)(NHC)(µ-H)]2, the potentially more reactive monomeric complexes Pt(SnR3)(NHC)(H) and the trihydride species Pt(SnBu(t)3)(IBu(t))(H)3 have been performed, for NHC = IMe and R = Me and for NHC = IBu(t) and R = Bu(t). The structures of complexes 3-8 and 11 have been determined by X-ray crystallography and are reported.
RESUMEN
The enthalpy of oxygen atom transfer (OAT) to V[(Me3SiNCH2CH2)3N], 1, forming OV[(Me3SiNCH2CH2)3N], 1-O, and the enthalpies of sulfur atom transfer (SAT) to 1 and V(N[t-Bu]Ar)3, 2 (Ar = 3,5-C6H3Me2), forming the corresponding sulfides SV[(Me3SiNCH2CH2)3N], 1-S, and SV(N[t-Bu]Ar)3, 2-S, have been measured by solution calorimetry in toluene solution using dbabhNO (dbabhNO = 7-nitroso-2,3:5,6-dibenzo-7-azabicyclo[2.2.1]hepta-2,5-diene) and Ph3SbS as chalcogen atom transfer reagents. The V-O BDE in 1-O is 6.3 ± 3.2 kcal·mol(-1) lower than the previously reported value for 2-O and the V-S BDE in 1-S is 3.3 ± 3.1 kcal·mol(-1) lower than that in 2-S. These differences are attributed primarily to a weakening of the V-Naxial bond present in complexes of 1 upon oxidation. The rate of reaction of 1 with dbabhNO has been studied by low temperature stopped-flow kinetics. Rate constants for OAT are over 20 times greater than those reported for 2. Adamantyl isonitrile (AdNC) binds rapidly and quantitatively to both 1 and 2 forming high spin adducts of V(III). The enthalpies of ligand addition to 1 and 2 in toluene solution are -19.9 ± 0.6 and -17.1 ± 0.7 kcal·mol(-1), respectively. The more exothermic ligand addition to 1 as compared to 2 is opposite to what was observed for OAT and SAT. This is attributed to less weakening of the V-Naxial bond in ligand binding as opposed to chalcogen atom transfer and is in keeping with structural data and computations. The structures of 1, 1-O, 1-S, 1-CNAd, and 2-CNAd have been determined by X-ray crystallography and are reported.
Asunto(s)
Calcógenos/química , Complejos de Coordinación/química , Nitrilos/química , Vanadio/química , Sitios de Unión , Complejos de Coordinación/síntesis química , Cinética , Modelos Moleculares , Estructura Molecular , Teoría Cuántica , TermodinámicaRESUMEN
Thermodynamic, kinetic, and computational studies are reported for oxygen atom transfer (OAT) to the complex V(N[t-Bu]Ar)3 (Ar = 3,5-C6H3Me2, 1) from compounds containing N-O bonds with a range of BDEs spanning nearly 100 kcal mol(-1): PhNO (108) > SIPr/MesCNO (75) > PyO (63) > IPr/N2O (62) > MesCNO (53) > N2O (40) > dbabhNO (10) (Mes = mesityl; SIPr = 1,3-bis(diisopropyl)phenylimidazolin-2-ylidene; Py = pyridine; IPr = 1,3-bis(diisopropyl)phenylimidazol-2-ylidene; dbabh = 2,3:5,6-dibenzo-7-azabicyclo[2.2.1]hepta-2,5-diene). Stopped flow kinetic studies of the OAT reactions show a range of kinetic behavior influenced by both the mode and strength of coordination of the O donor and its ease of atom transfer. Four categories of kinetic behavior are observed depending upon the magnitudes of the rate constants involved: (I) dinuclear OAT following an overall third order rate law (N2O); (II) formation of stable oxidant-bound complexes followed by OAT in a separate step (PyO and PhNO); (III) transient formation and decay of metastable oxidant-bound intermediates on the same time scale as OAT (SIPr/MesCNO and IPr/N2O); (IV) steady-state kinetics in which no detectable intermediates are observed (dbabhNO and MesCNO). Thermochemical studies of OAT to 1 show that the V-O bond in O≡V(N[t-Bu]Ar)3 is strong (BDE = 154 ± 3 kcal mol(-1)) compared with all the N-O bonds cleaved. In contrast, measurement of the N-O bond in dbabhNO show it to be especially weak (BDE = 10 ± 3 kcal mol(-1)) and that dissociation of dbabhNO to anthracene, N2, and a (3)O atom is thermodynamically favorable at room temperature. Comparison of the OAT of adducts of N2O and MesCNO to the bulky complex 1 show a faster rate than in the case of free N2O or MesCNO despite increased steric hindrance of the adducts.
RESUMEN
The 3,4,8,9-tetramethyl-1,6-diphospha-bicyclo-[4.4.0]deca-3,8-diene (P2(C6H10)2) framework containing a P-P bond has allowed for an unprecedented selectivity toward functionalization of a single phosphorus lone pair with reference to acyclic diphosphane molecules. Functionalization at the second phosphorus atom was found to proceed at a significantly slower rate, thus opening the pathway for obtaining mixed functional groups for a pair of P-P bonded λ(5)-phosphorus atoms. Reactivity with the chalcogen-atom donors MesCNO (Mes = 2,4,6-C6H2Me3) and SSbPh3 has allowed for the selective synthesis of the diphosphane chalcogenides OP2(C6H10)2 (87%), O2P2(C6H10)2 (94%), SP2(C6H10)2 (56%), and S2P2(C6H10)2 (87%). Computational studies indicate that the oxygen-atom transfer reactions involve penta-coordinated phosphorus intermediates that have four-membered {PONC} cycles. The P-E bond dissociation enthalpies in EP2(C6H10)2 were measured via calorimetric studies to be 134.7 ± 2.1 kcal/mol for P-O, and 93 ± 3 kcal/mol for P-S, respectively, in good agreement with the computed values. Additional reactivity with breaking of the P-P bond and formation of diphosphinate O3P2(C6H10)2 was only observed to occur upon heating of dimethylsulfoxide solutions of the precursor. Reactivity of diphosphane P2(C6H10)2 with azides allowed the isolation of monoiminophosphoranes (RN)P2(C6H10)2(R = Mes, CPh3, SiMe3), and treatment with additional MesN3 yielded symmetric and unsymmetric diiminodiphosphoranes (RN)(MesN)P2(C6H10)2 (91% for R = Mes). Metalation reactions with the bulky diiminodiphosphorane ligand (MesN)2P2(C6H10)2 (nppn) allowed for the isolation and characterization of (nppn)Mo(η(3)-C3H5)Cl(CO)2 (91%), (nppn)NiCl2 (76%), and [(nppn)Ni(η(3)-2-C3H4Me)][OTf] showing that these ligands provide an attractive preorganized binding pocket for both late and early transition metals.
RESUMEN
Pt(IV) complexes trans-Pt(PEt3)2(R)(Br)3 (R = Br, aryl and polycyclic aromatic fragments) photoeliminate molecular bromine with quantum yields as high as 82%. Photoelimination occurs both in the solid state and in solution. Calorimetry measurements and DFT calculations (PMe3 analogs) indicate endothermic and endergonic photoeliminations with free energies from 2 to 22 kcal/mol of Br2. Solution trapping experiments with high concentrations of 2,3-dimethyl-2-butene suggest a radical-like excited state precursor to bromine elimination.
RESUMEN
Treatment of V(N[(t)Bu]Ar)(3) (1) (Ar = 3,5-Me(2)C(6)H(3)) with O(2) was shown by stopped-flow kinetic studies to result in the rapid formation of (η(1)-O(2))V(N[(t)Bu]Ar)(3) (2) (ΔH() = 3.3 ± 0.2 kcal/mol and ΔS() = -22 ± 1 cal mol(-1) K(-1)), which subsequently isomerizes to (η(2)-O(2))V(N[(t)Bu]Ar)(3) (3) (ΔH() = 10.3 ± 0.9 kcal/mol and ΔS() = -6 ± 4 cal mol(-1) K(-1)). The enthalpy of binding of O(2) to form 3 is -75.0 ± 2.0 kcal/mol, as measured by solution calorimetry. The reaction of 3 and 1 to form 2 equiv of O≡V(N[(t)Bu]Ar)(3) (4) occurs by initial isomerization of 3 to 2. The results of computational studies of this rearrangement (ΔH = 4.2 kcal/mol; ΔH() = 16 kcal/mol) are in accord with experimental data (ΔH = 4 ± 3 kcal/mol; ΔH() = 14 ± 3 kcal/mol). With the aim of suppressing the formation of 4, the reaction of O(2) with 1 in the presence of (t)BuCN was studied. At -45 °C, the principal products of this reaction are 3 and (t)BuC(âO)N≡V(N[(t)Bu]Ar)(3) (5), in which the bound nitrile has been oxidized. Crystal structures of 3 and 5 are reported.
RESUMEN
The reactivity of a number of two-coordinate [Pd(L)(L')] (L = N-heterocyclic carbene (NHC) and L' = NHC or PR(3)) complexes with O(2) has been examined. Stopped-flow kinetic studies show that O(2) binding to [Pd(IPr)(P(p-tolyl)(3))] to form cis-[Pd(IPr)(P(p-tolyl)(3))(η(2)-O(2))] occurs in a rapid, second-order process. The enthalpy of O(2) binding to the Pd(0) center has been determined by solution calorimetry to be -26.2(1.9) kcal/mol. Extension of this work to the bis-NHC complex [Pd(IPr)(2)], however, did not lead to the formation of the expected diamagnetic complex cis-[Pd(IPr)(2)(η(2)-O(2))] but to paramagnetic trans-[(Pd(IPr)(2)(η(1)-O(2))(2)], which has been fully characterized. Computational studies addressing the energetics of O(2) binding have been performed and provide insight into reactivity changes as steric pressure is increased.
RESUMEN
The enthalpies of oxygen atom transfer (OAT) from mesityl nitrile oxide (MesCNO) to Me(3)P, Cy(3)P, Ph(3)P, and the complex (Ar[(t)Bu]N)(3)MoP (Ar = 3,5-C(6)H(3)Me(2)) have been measured by solution calorimetry yielding the following P-O bond dissociation enthalpy estimates in toluene solution (±3 kcal mol(-1)): Me(3)PO [138.5], Cy(3)PO [137.6], Ph(3)PO [132.2], (Ar[(t)Bu]N)(3)MoPO [108.9]. The data for (Ar[(t)Bu]N)(3)MoPO yield an estimate of 60.2 kcal mol(-1) for dissociation of PO from (Ar[(t)Bu]N)(3)MoPO. The mechanism of OAT from MesCNO to R(3)P and (Ar[(t)Bu]N)(3)MoP has been investigated by UV-vis and FTIR kinetic studies as well as computationally. Reactivity of R(3)P and (Ar[(t)Bu]N)(3)MoP with MesCNO is proposed to occur by nucleophilic attack by the lone pair of electrons on the phosphine or phosphide to the electrophilic C atom of MesCNO forming an adduct rather than direct attack at the terminal O. This mechanism is supported by computational studies. In addition, reaction of the N-heterocyclic carbene SIPr (SIPr = 1,3-bis(diisopropyl)phenylimidazolin-2-ylidene) with MesCNO results in formation of a stable adduct in which the lone pair of the carbene attacks the C atom of MesCNO. The crystal structure of the blue SIPr·MesCNO adduct is reported, and resembles one of the computed structures for attack of the lone pair of electrons of Me(3)P on the C atom of MesCNO. Furthermore, this adduct in which the electrophilic C atom of MesCNO is blocked by coordination to the NHC does not undergo OAT with R(3)P. However, it does undergo rapid OAT with coordinatively unsaturated metal complexes such as (Ar[(t)Bu]N)(3)V since these proceed by attack of the unblocked terminal O site of the SIPr·MesCNO adduct rather than at the blocked C site. OAT from MesCNO to pyridine, tetrahydrothiophene, and (Ar[(t)Bu]N)(3)MoN was found not to proceed in spite of thermochemical favorability.
Asunto(s)
Nitrilos/química , Óxidos/química , Oxígeno/química , Fosfinas/química , Calorimetría , Cinética , TermodinámicaRESUMEN
Ball milling of sodium oxides and alkali metal halide salts under a pressure of 2 atm nitrous oxide at temperatures of 38 ± 4 °C is reported. After 2.5 h of ball milling, FTIR data for both 14N2O and 15N2O additions show conclusively that cis-Na2N2O2 is formed based on excellent agreement with data reported earlier by Jansen and Feldmann who prepared pure crystalline cis-Na2N2O2 by reaction of sodium oxide and nitrous oxide for 2 h at 360 °C in a tube furnace. Continued ball milling under nitrous oxide leads to slow buildup of NaNO3 with yields on the order of 24% achieved in 20 h. Production of nitrate only occurs during active ball milling. Studies over the first 10 h reveal a trend among potassium halide salts: KBr â KCl > KI â« KF. Ball milling of sodium oxide alone under an atmosphere of N2O gives much lower yields than ball milling in the presence of added alkali metal halide salt. Ball milling of sodium oxide and nitrous oxide in fluorocarbon oil, silicone oil, calcium fluoride, clinoptilolite, molecular sieves, and silica gel does not lead to significant yields of either cis-Na2N2O2 or NaNO3.
RESUMEN
Variable temperature equilibrium studies were used to derive thermodynamic data for formation of eta(1) nitrile complexes with Mo(N[(t)Bu]Ar)(3), 1. (1-AdamantylCN = AdCN: DeltaH(degrees) = -6 +/- 2 kcal mol(-1), DeltaS(degrees) = -20 +/- 7 cal mol(-1) K(-1). C(6)H(5)CN = PhCN: DeltaH(degrees) = -14.5 +/- 1.5 kcal mol(-1), DeltaS(degrees) = -40 +/- 5 cal mol(-1) K(-1). 2,4,6-(H(3)C)(3)C(6)H(2)CN = MesCN: DeltaH(degrees) = -15.4 +/- 1.5 kcal mol(-1), DeltaS(degrees) = -52 +/- 5 cal mol(-1) K(-1).) Solution calorimetric studies show that the enthalpy of formation of 1-[eta(2)-NCNMe(2)] is more exothermic (DeltaH(degrees) = -22.0 +/- 1.0 kcal mol(-1)). Rate and activation parameters for eta(1) binding of nitriles were measured by stopped flow kinetic studies (AdCN: DeltaH(on)(++) = 5 +/- 1 kcal mol(-1), DeltaS(on)(++) = -28 +/- 5 cal mol(-1) K(-1); PhCN: DeltaH(on)(++) = 5.2 +/- 0.2 kcal mol(-1), DeltaS(on)(++) = -24 +/- 1 cal mol(-1) K(-1); MesCN: DeltaH(on)(++) = 5.0 +/- 0.3 kcal mol(-1), DeltaS(on)(++) = -26 +/- 1 cal mol(-1) K(-1)). Binding of Me(2)NCN was observed to proceed by reversible formation of an intermediate complex 1-[eta(1)-NCNMe(2)] which subsequently forms 1-[eta(2)-NCNMe(2)]: DeltaH(++)(k1) = 6.4 +/- 0.4 kcal mol(-1), DeltaS(++)(k1) = -18 +/- 2 cal mol(-1) K(-1), and DeltaH(++)(k2) = 11.1 +/- 0.2 kcal mol(-1), DeltaS(++)(k2) = -7.5 +/- 0.8 cal mol(-1) K(-1). The oxidative addition of PhSSPh to 1-[eta(1)-NCPh] is a rapid second-order process with activation parameters: DeltaH(++) = 6.7 +/- 0.6 kcal mol(-1), DeltaS(++) = -27 +/- 4 cal mol(-1) K(-1). The oxidative addition of PhSSPh to 1-[eta(2)-NCNMe(2)] also followed a second-order rate law but was much slower: DeltaH(++) = 12.2 +/- 1.5 kcal mol(-1) and DeltaS(++) = -25.4 +/- 5.0 cal mol(-1) K(-1). The crystal structure of 1-[eta(1)-NC(SPh)NMe(2)] is reported. Trapping of in situ generated 1-[eta(1)-NCNMe(2)] by PhSSPh was successful at low temperatures (-80 to -40 degrees C) as studied by stopped flow methods. If 1-[eta(1)-NCNMe(2)] is not intercepted before isomerization to 1-[eta(2)-NCNMe(2)] no oxidative addition occurs at low temperatures. The structures of key intermediates have been studied by density functional theory, confirming partial radical character of the carbon atom in eta(1)-bound nitriles. A complete reaction profile for reversible ligand binding, eta(1) to eta(2) isomerization, and oxidative addition of PhSSPh has been assembled and gives a clear picture of ligand reactivity as a function of hapticity in this system.
RESUMEN
The reaction of PR(3) (R = Cy, (i)Pr) with 1-adamantyl azide (N(3)Ad) in benzene results in an equilibrium of the starting material and the phosphazide R(3)PN(3)Ad. Thermodynamic and kinetic measurements were taken of the reaction of P(i)Pr(3) with N(3)Ad and yielded DeltaH = -18.7 +/- 1.0 kcal mol(-1), DeltaS = -52.5 +/- 2.0 cal mol(-1) K(-1), DeltaH() = +12.0 +/- 1.0 kcal mol(-1), and DeltaS() = -25.3 +/- 1.2 cal mol(-1) K(-1). The phosphazides, R(3)PN(3)Ad, do not readily lose N(2) for R = Cy and (i)Pr; however, the reaction of PMe(3) with N(3)Ad results in a smooth formation of the phosphazene Me(3)PNAd with N(2) loss. Calorimetric investigations of this reaction led to an estimation of DeltaH = -40 +/- 3 kcal mol(-1) for the loss of N(2) from the intermediate phosphazide R(3)PN(3)Ad and also yield an estimation of 72 +/- 5 kcal mol(-1) for the bond dissociation energy of the PN bond in R(3)PNAd. The X-ray crystal structure of Cy(3)PN(3)Ad is reported.
RESUMEN
The enthalpies of binding of a number of N-donor ligands to the complex Mo(P(i)Pr(3))(2)(CO)(3) in toluene have been determined by solution calorimetry and equilibrium measurements. The measured binding enthalpies span a range of approximately 10 kcal mol(-1): DeltaH(binding) = -8.8 +/- 1.2 (N(2)-Mo(P(i)Pr(3))(2)(CO)(3)); -10.3 +/- 0.8 (N(2)); -11.2 +/- 0.4 (AdN(3) (Ad = 1-adamantyl)); -13.8 +/- 0.5 (N(2)CHSiMe(3)); -14.9 +/- 0.9 (pyrazine = pz); -14.8 +/- 0.6 (2,6-Me(2)pz); -15.5 +/- 1.8 (Me(2)NCN); -16.6 +/- 0.4 (CH(3)CN); -17.0 +/- 0.4 (pyridine); -17.5 +/- 0.8 ([4-CH(3)pz][PF(6)] (in tetrahydrofuran)); -17.6 +/- 0.4 (C(6)H(5)CN); -18.6 +/- 1.8 (N(2)CHC( horizontal lineO)OEt); and -19.3 +/- 2.5 kcal mol(-1) (pz)Mo(P(i)Pr(3))(2)(CO)(3)). The value for the isonitrile AdNC (-29.0 +/- 0.3) is 12.3 kcal mol(-1) more exothermic than that of the nitrile AdCN (-16.7 +/- 0.6 kcal mol(-1)). The enthalpies of binding of a range of arene nitrile ligands were also studied, and remarkably, most nitrile complexes were clustered within a 1 kcal mol(-1) range despite dramatic color changes and variation of nu(CN). Computed structural and spectroscopic parameters for the complexes Mo(P(i)Pr(3))(2)(CO)(3)L are in good agreement with experimental data. Computed binding enthalpies for Mo(P(i)Pr(3))(2)(CO)(3)L exhibit considerable scatter and are generally smaller compared to the experimental values, but relative agreement is reasonable. Computed enthalpies of binding using a larger basis set for Mo(PMe(3))(2)(CO)(3)L show a better fit to experimental data than that for Mo(P(i)Pr(3))(2)(CO)(3)L using a smaller basis set. Crystal structures of Mo(P(i)Pr(3))(2)(CO)(3)(AdCN), W(P(i)Pr(3))(2)(CO)(3)(Me(2)NCN), W(P(i)Pr(3))(2)(CO)(3)(2,6-F(2)C(6)H(3)CN), W(P(i)Pr(3))(2)(CO)(3)(2,4,6-Me(3)C(6)H(2)CN), W(P(i)Pr(3))(2)(CO)(3)(2,6-Me(2)pz), W(P(i)Pr(3))(2)(CO)(3)(AdCN), Mo(P(i)Pr(3))(2)(CO)(3)(AdNC), and W(P(i)Pr(3))(2)(CO)(3)(AdNC) are reported.
RESUMEN
Synthetic studies are reported that show that the reaction of either H2SnR2 (R = Ph, n-Bu) or HMo(CO)3(Cp) (1-H, Cp = eta(5)-C5H5) with Mo(N[t-Bu]Ar)3 (2, Ar = 3,5-C6H3Me2) produce HMo(N[t-Bu]Ar)3 (2-H). The benzonitrile adduct (PhCN)Mo(N[t-Bu]Ar)3 (2-NCPh) reacts rapidly with H2SnR2 or 1-H to produce the ketimide complex (Ph(H)C=N)Mo(N[t-Bu]Ar)3 (2-NC(H)Ph). The X-ray crystal structures of both 2-H and 2-NC(H)Ph are reported. The enthalpy of reaction of 1-H and 2 in toluene solution has been measured by solution calorimetry (DeltaH = -13.1 +/- 0.7 kcal mol(-1)) and used to estimate the Mo-H bond dissociation enthalpy (BDE) in 2-H as 62 kcal mol(-1). The enthalpy of reaction of 1-H and 2-NCPh in toluene solution was determined calorimetrically as DeltaH = -35.1 +/- 2.1 kcal mol(-1). This value combined with the enthalpy of hydrogenation of [Mo(CO)3(Cp)]2 (1(2)) gives an estimated value of 90 kcal mol(-1) for the BDE of the ketimide C-H of 2-NC(H)Ph. These data led to the prediction that formation of 2-NC(H)Ph via nitrile insertion into 2-H would be exothermic by approximately 36 kcal mol(-1), and this reaction was observed experimentally. Stopped flow kinetic studies of the rapid reaction of 1-H with 2-NCPh yielded DeltaH(double dagger) = 11.9 +/- 0.4 kcal mol(-1), DeltaS(double dagger) = -2.7 +/- 1.2 cal K(-1) mol(-1). Corresponding studies with DMo(CO)3(Cp) (1-D) showed a normal kinetic isotope effect with kH/kD approximately 1.6, DeltaH(double dagger) = 13.1 +/- 0.4 kcal mol(-1) and DeltaS(double dagger) = 1.1 +/- 1.6 cal K(-1) mol(-1). Spectroscopic studies of the much slower reaction of 1-H and 2 yielding 2-H and 1/2 1(2) showed generation of variable amounts of a complex proposed to be (Ar[t-Bu]N)3Mo-Mo(CO)3(Cp) (1-2). Complex 1-2 can also be formed in small equilibrium amounts by direct reaction of excess 2 and 1(2). The presence of 1-2 complicates the kinetic picture; however, in the presence of excess 2, the second-order rate constant for H atom transfer from 1-H has been measured: 0.09 +/- 0.01 M(-1) s(-1) at 1.3 degrees C and 0.26 +/- 0.04 M(-1) s(-1) at 17 degrees C. Study of the rate of reaction of 1-D yielded kH/kD = 1.00 +/- 0.05 consistent with an early transition state in which formation of the adduct (Ar[t-Bu]N)3Mo...HMo(CO)3(Cp) is rate limiting.
RESUMEN
The factors controlling both the binding of small molecules to several tungsten complexes and agostic bonding in the W(CO)3(PCy3)2 complex have been examined through B3LYP hybrid density functional theory and ab initio MP2 calculations with and without basis set superposition error (BSSE) corrections. This approach attempts to isolate insofar as possible the separate effects of intrinsic bonding interactions, electron induction by ligands, and steric hindrance and strain. An important conclusion from this study is that for bimolecular reactions, BSSE corrections must be included for quantitative predictions. There is a reasonably good correlation between the BSSE-corrected B3LYP and MP2 results for bond dissociation enthalpies (BDEs) of very small molecules (H2, N2, and CO), but generally B3LYP BDEs tend to be smaller than the corresponding MP2 values. In the few cases where a comparison with experimental data can be appropriately made, it appears that the BSSE-corrected MP2 BDEs are more reliable. Using N2 as a probe molecule, the strength of the agostic bond in W(CO)3(PCy3)2 has been examined by calculating the BDE of N2 in a series of tungsten complexes with increasing electron inducing effect without agostic bonding, then extrapolating the expected trend to the case of agostically bonded W(CO)3(PCy3)2. Comparison of the extrapolated value to the calculated BDE of W(CO)3(PCy3)2(N2) yields an estimated strength of the agostic bond of from 7 to 9 kcal mol-1. Approximately 5 kcal mol-1 of the interaction is assigned to the net agostic interaction associated with moving from a nonagostic local minimum configuration of the PCy3 ligands to the agostically bonded global minimum.
RESUMEN
Reaction of a large excess of H(2)S with 2 mol of (*)Cr(CO)(3)C(5)Me(5) yields HCr(CO)(3)C(5)Me(5) and HSCr(CO)(3)C(5)Me(5). Kinetic studies of this reaction show two reaction pathways are followed. At pressures of CO above 10-15 atm and temperatures =10 degrees C, a third-order rate law d[P]/dt = k(3rd) (order)[(*)Cr(CO)(3)C(5)Me(5)](2)[H(2)S] is followed. The value of the third-order rate constant 70 +/- 5 M(-)(2) s(-)(1) is essentially independent of temperature in the range -30 to +10 degrees C. As the pressure of CO is reduced, mixed-order kinetics is followed, and under argon atmosphere the reaction obeys the following second-order rate law: d[P]/dt = k(2nd) (order)[(*)Cr(CO)(3)C(5)Me(5)][H(2)S]. The value of k(2nd) (order) was found to be 0.20 +/- 0.05 M(-)(1) s(-)(1) at 1 degrees C and 0.30 +/- 0.05 M(-)(1) s(-)(1) at 10 degrees C. This reaction channel is proposed to proceed by rate-determining ligand substitution and formation of the hydrogen sulfide substituted radical complex (*)Cr(H(2)S)(CO)(2)C(5)Me(5). The rate of ligand substitution of (*)Cr(CO)(3)C(5)Me(5) by PMe(2)Ph yielding the phosphine-substituted radical (*)Cr(PMe(2)Ph)(CO)(2)C(5)Me(5) has been reinvestigated and shown to have rate constants and activation parameters similar to those proposed for rate-determining formation of (*)Cr(H(2)S)(CO)(2)C(5)Me(5). A reasonable fit to data at intermediate pressures of CO is obtained at T = 10 degrees C by combining the 17e(-) second order and 19e(-) third-order mechanisms for oxidative addition. The complex HSCr(CO)(3)C(5)Me(5) can react with an additional 2 mol of (*)Cr(CO)(3)C(5)Me(5) yielding HCr(CO)(3)C(5)Me(5) + C(5)Me(5)(CO)(2)Cr=S=Cr(CO)(2)C(5)Me(5) + 2CO. At a temperature of 50 degrees C under 1 atm of CO the net reaction 4(*)Cr(CO)(3)C(5)Me(5) + H(2)S --> 2HCr(CO)(3)C(5)Me(5) + C(5)Me(5)(CO)(2)Cr=S=Cr(CO)(2)C(5)Me(5) + 2CO occurs within minutes without formation of detectable amounts of HSCr(CO)(3)C(5)Me(5).
RESUMEN
Reaction of H-Cr(CO)(3)C(5)Me(5) with *NO at 1-2 atm pressure in toluene solution yields Cr(NO)(CO)(2)C(5)Me(5) as the sole metal-containing product in addition to N(2)O and HNO(2) as the principle nitrogen-containing products. N(2)O and HNO(2) are attributed to decomposition of the initial product HNO. Kinetic studies yield the rate law d[P]/dt = -k(2nd)( )(order)[HCr(CO)(3)C(5)Me(5)][*NO]; k(2nd)( )(order) = 0.14 M(-)(1) s(-)(1) at 10 degrees C, with DeltaH() = 11.7 +/- 1.5 kcal/mol and DeltaS() = -16.3 +/- 3.5 cal/(mol deg). The rate of reaction is not inhibited by CO. The kinetic isotope effect for reaction of D-Cr(CO)(3)C(5)Me(5) is k(H)/k(D) = 1.7. These observations are consistent with a first step involving direct H (D) atom transfer from the metal hydride to *NO, forming HNO. Also supporting this mechanism is the approximately 150-times slower reaction of H-Mo(CO)(3)C(5)Me(5) and failure to observe reaction for H-W(CO)(3)C(5)Me(5) in keeping with metal-hydrogen bond strengths Cr < Mo < W. Reaction of PhS-Cr(CO)(3)C(5)Me(5) with NO at 1-2 atm pressure in toluene solution also forms Cr(NO)(CO)(2)C(5)Me(5) as the sole metal-containing product. The initial product is the unstable nitrosothiol PhS-NO. Kinetic studies yield the rate law d[P]/dt = -k(1st)( )(order)[PhS-Cr(CO)(3)C(5)Me(5)]; k(1st)( )(order) = 3.1 +/- 0.3 x 10(-)(3) s(-)(1) at 10 degrees C, with DeltaH() = 21.6 +/- 1.2 kcal/mol, DeltaS() = + 3.9 +/- 1.5 cal/(mol deg). The rate of reaction is independent of both NO and CO pressure. The transition state in the first-order process is proposed to involve migration of bound thiolate to coordinated CO, forming Cr(CO)(2) (eta(2)-C(=O)SPh)C(5)Me(5). The enthalpy of reaction of *Cr(CO)(3)C(5)Me(5) and NO yielding Cr(NO)(CO)(2)C(5)Me(5) and CO has been measured by solution calorimetry: DeltaH degrees = -33.2 +/- 1.8 kcal/mol. The Cr-NO bond strength is estimated as approximately 70 kcal/mol and provides the net thermodynamic driving force for the proposed elimination of the unstable molecules HNO and PhSNO.