More Accurate Measurement of Return Peak Current in Cyclic Voltammetry Using Diffusional Baseline Fitting.

The difficulty associated with accurately measuring the height of the back peak (Ipb) in cyclic voltammetry (CV) has long plagued electrochemists. Most commonly, Ipb is measured by extrapolating a linear fit from a selected region of a voltammogram after the switching potential (Eλ), but without substantial separation between the peak potential (Ep) and Eλ, this approach always overestimates the background current and so underestimates Ipb. Moreover, experimental conditions can present challenges for this method as an appropriate region for linear fitting is often lacking due to neighboring peaks or solvent electrolysis current. Here, we present a new method for finding the baseline current for the back peak in CV experiments. By examining the CV data as a function of time rather than potential, it is possible to fit a generalized Cottrell or Shoup-Szabo equation to the current decay of the forward peak and extrapolate this function as a baseline for the return peak. This approach was tested by using simulated and experimental data in a variety of conditions, including data demonstrating linear and radial diffusional control. We found that the method allows for more accurate determination of back peak currents, especially when linear fits are complicated by narrow electrochemical windows or radial diffusion. A user-friendly Python program was written to automatically find an appropriate fitting range for this analysis and measure peak currents. We have made this program available to the electrochemical community at large.

Functionalized α-Cyanostilbene Derivatives for Detection of Hypoxia or Proteostasis Imbalance in Live Cells.

α-Cyanostilbene represents one of the easily functionalized aggregation-induced emission (AIE) scaffolds. It has been widely adopted for the construction of fluorescent materials for broad applications. Here, we further expanded the utilization of α-cyanostilbene derivatives for the detection of hypoxia or proteostasis imbalance in live cells. Four different amine containing donors were introduced to construct α-cyanostilbene derivatives (R-ASC) with donor-acceptor scaffolds. Equipped with the cysteine (Cys) reactive group, maleimide (MI), R-ASC-MI shows fluorescence turn-on property upon binding with unfolded proteins in vitro and in live cells under proteostatic stress. By virtue of R-ASC-MI, the level of unfolded protein loads in cells can be quantified by flow cytometry, or visualized under microscope. Furthermore, we also characterized the performance of R-ASC-NO2, synthetic precursors of R-ASC-MI, in cellular hypoxia. R-ASC-NO2 revealed upregulated activities of nitroreductase, as well as increased hydrophobicity in live cells, under either chemical (NaN3) induced or atmospheric (1 % O2) hypoxia. Together, the advantages of easy modification and high signal-to-noise ratio of new α-cyanostilbene derivatives reported in this work highlight the great potential of α-cyanostilbene in constructing functional biosensors and many other domains.

Elucidating the Mechanism of Efficient Eu(III) and Yb(III) Sensitisation from a Re(I) Tetrazolato Triangular Assembly.

The reaction of Re(CO)5Br with deprotonated 1H-(5-(2,2':6',2''-terpyridine)pyrid-2-yl)tetrazole yields a triangular assembly formed by tricarbonyl Re(I) vertices. Photophysical measurements reveal blue-green emission with a maximum at 520 nm, 32 % quantum yield, and 2430 ns long-lived excited state decay lifetime in deaerated dichloromethane solution. Coordination of lanthanoid ions to the terpyridine units red-shifts the emission to 570 nm and also reveals efficient (90 %) and fast sensitisation of both Eu(III) and Yb(III) at room temperature, with a similar rate constant kET on the order of 107 s-1. Efficient sensitisation of Eu(III) from Re(I) is unprecedented, especially when considering the close proximity in energy between the donor and acceptor excited states. On the other hand, comparative measurements at 77 K reveal that energy transfer to Yb(III) is two orders of magnitude slower than that to Eu(III). A two-step mechanism of sensitisation is therefore proposed, whereby the rate-determining step is a thermally activated energy transfer step between the Re(I) centre and the terpyridine functionality, followed by rapid energy transfer to the respective Ln(III) excited states. At 77 K, the direct Re(I) to Eu(III) energy transfer seems to proceed via a ligand-mediated superexchange Dexter-type mechanism.

A sulphide resistant Ag|AgCl reference electrode for long-term monitoring.

Reference electrodes which demonstrate long-term potential stability are essential for many continuous monitoring applications and are commonly based on Ag|AgCl electrodes; however, these electrodes are susceptible to poisoning from aqueous sulphide species which are commonly present in wastewater and natural groundwater. This work presents a sulphide resistant solid-state reference electrode (SSRE) based on a composite material using suspended KCl electrolyte and sacrificial AgCl in a cross-linked polyvinyl acetate polymer matrix. Sulphidation of the sacrificial AgCl produces a stable Ag2S precipitate and prevents further ingress of the poisoning sulphide species through the composite material. A novel SSRE using this material is compared to a control SSRE without suspended AgCl and a typical liquid filled reference electrode. These three reference electrodes are studied using electrochemical impedance spectroscopy (EIS), and their application is also studied in potentiometric pH sensing and cyclic voltammetry (CV). The long-term sulphide resistance of the two SSREs is also studied with potentiometry, and cross-sections of these electrodes were examined using micro X-ray fluorescence (µXRF). Both SSREs demonstrated higher impedance than the liquid reference electrode but were similar to other SSREs reported in the literature. This impedance did not result a meaningful difference in potentiometric pH sensing or CV experiments done using typical scan rates. The KCl/AgCl SSRE exhibited remarkable sulphide resistance, with all samples demonstrating a stable potential without maintenance after ca. 120 days of continuous immersion in 1 g L-1 Na2S solution, whereas KCl SSRE samples all demonstrated significant drift before this time. µXRF sulphur maps revealed that suspended AgCl prevented sulphide ingress, thus protecting the embedded Ag|AgCl electrode. This work presents a reference electrode that could enable long-term monitoring in challenging sulphide solutions, and also highlights a novel approach for preventing reference electrode poisoning which could be more widely explored.

Wide-Bite-Angle Diphosphine Ligands in Thermally Activated Delayed Fluorescent Copper(I) Complexes: Impact on the Performance of Electroluminescence Applications.

We report a series of seven cationic heteroleptic copper(I) complexes of the form [Cu(P^P)(dmphen)]BF4, where dmphen is 2,9-dimethyl-1,10-phenanthroline and P^P is a diphosphine chelate, in which the effect of the bite angle of the diphosphine ligand on the photophysical properties of the complexes was studied. Several of the complexes exhibit moderately high photoluminescence quantum yields in the solid state, with ΦPL of up to 35%, and in solution, with ΦPL of up to 98%. We were able to correlate the powder photoluminescence quantum yields with the % Vbur of the P^P ligand. The most emissive complexes were used to fabricate both organic light-emitting diodes and light-emitting electrochemical cells (LECs), both of which showed moderate performance. Compared to the benchmark copper(I)-based LECs, [Cu(dnbp)(DPEPhos)]+ (maximum external quantum efficiency, EQEmax = 16%), complex 3 (EQEmax = 1.85%) showed a much longer device lifetime (t1/2 = 1.25 h and >16.5 h for [Cu(dnbp)(DPEPhos)]+ and complex 3, respectively). The electrochemiluminescence (ECL) properties of several complexes were also studied, which, to the best of our knowledge, constitutes the first ECL study for heteroleptic copper(I) complexes. Notably, complexes exhibiting more reversible electrochemistry were associated with higher annihilation ECL as well as better performance in a LEC.

Metathesis Reactions between Heavy d-8 Fluorides and I(III)-Pyridine Complexes.

The reaction between trans-[AuF2(pyridine)2]+ and [PhI(pyridine)2]2+ results in the formation of PhIF2 and [Au(pyridine)4]3+. Investigation of the reaction pathway using model Pd and Pt analogues of the gold complex indicate that the most likely mechanism is attack by the Au-F onto the I(III), rather than a redox process. This demonstrates that the Au(III)-F fragment can behave in a nucleophilic manner even in a relatively electron-poor cationic complex.

Mixed annihilation electrogenerated chemiluminescence of iridium(iii) complexes.

Previously reported annihilation ECL of mixtures of metal complexes have generally comprised Ir(ppy)3 or a close analogue as a higher energy donor/emitter (green/blue light) and [Ru(bpy)3]2+ or its derivative as a lower energy acceptor/emitter (red light). In contrast, here we examine Ir(ppy)3 as the lower energy acceptor/emitter, by combining it with a second Ir(iii) complex: [Ir(df-ppy)2(ptb)]+ (where ptb = 1-benzyl-1,2,3-triazol-4-ylpyridine). The application of potentials sufficient to attain the first single-electron oxidation and reduction products can be exploited to detect Ir(ppy)3 at orders of magnitude lower concentration, or enhance its maximum emission intensity at high concentration far beyond that achievable through conventional annihilation ECL of Ir(ppy)3 involving comproportionation. Moreover, under certain conditions, the colour of the emission can be selected through the applied electrochemical potentials. We have also prepared a novel Ir(iii) complex with a sufficiently low reduction potential that the reaction between its reduced form and Ir(ppy)3+ cannot populate the excited state of either luminophore. This enabled, for the first time, the exclusive formation of either excited state through the application of higher cathodic or anodic potentials, but in both cases, the ECL was greatly diminished by parasitic dark reactions.

Aggregation-Induced Electrochemiluminescence of Platinum(II) Complexes.

We report the electrochemiluminescence properties of square-planar Pt(II) complexes that result from the formation of supramolecular nanostructures. We define this new phenomenon as aggregation-induced electrochemiluminescence (AIECL). In this system, self-assembly changes the HOMO and LUMO energies, making their population accessible via ECL pathways and leading to the generation of the luminescent excited state. Significantly, the emission from the self-assembled system is the first example of electrochemiluminescence (ECL) of Pt(II) complexes in aqueous solution having higher efficiency than the standard, Ru(bpy)32+.The finding can lead to a new generation of bright emitters that can be used as ECL labels.

9-Vinylanthracene Based Fluorogens: Synthesis, Structure-Property Relationships and Applications.

Fluorescent dyes with aggregation-induced emission (AIE) properties exhibit intensified emission upon aggregation. They are promising candidates to study biomolecules and cellular changes in aqueous environments when aggregation formation occurs. Here, we report a group of 9-position functionalized anthracene derivatives that were conveniently synthesized by the palladium-catalyzed Heck reaction. Using fluorometric analyses, these dyes were confirmed to show AIE behavior upon forming aggregates at high concentrations, in viscous solvents, and when poorly solubilized. Their photophysical properties were then further correlated with their structural features, using density functional theory (DFT) calculation. Finally, we demonstrated their potential applications in monitoring pH changes, quantifying globular proteins, as well as cell imaging with confocal microscopy.

A Strong cis-Effect in an Imidazole-Imidazolium-Substituted Alkene.

We report the first example of an alkene with two carbon-bound substituents (imidazole and imidazolium rings) where the Z-isomer has a greater thermodynamic stability than the E-isomer which persists in both the gas phase and in solution. Theoretical calculations, solution fluorescence spectroscopy and gas-phase ion mobility mass spectrometry studies confirm the preference for the Z-isomer, the stability of which is traced to a non-covalent interaction between the imidazole lone pair and the imidazolium ring.

Considering the chemical energy requirements of the tri-n-propylamine co-reactant pathways for the judicious design of new electrogenerated chemiluminescence detection systems.

The introduction of a 'co-reactant' was a critical step in the evolution of electrogenerated chemiluminescence (ECL) from a laboratory curiosity to a widely utilised detection system. In conjunction with a suitable electrochemiluminophore, the co-reactant enables generation of both the oxidised and reduced precursors to the emitting species at a single electrode potential, under the aqueous conditions required for most analytical applications. The most commonly used co-reactant is tri-n-propylamine (TPrA), which was developed for the classic tris(2,2'-bipyridine)ruthenium(II) ECL reagent. New electrochemiluminophores such as cyclometalated iridium(III) complexes are also evaluated with this co-reactant. However, attaining the excited states in these systems can require much greater energy than that of tris(2,2'-bipyridine)ruthenium(II), which has implications for the co-reactant reaction pathways. In this tutorial review, we describe a simple graphical approach to characterise the energetically feasible ECL pathways with TPrA, as a useful tool for the development of new ECL detection systems.

Access to the Parent Tetrakis(pyridine)gold(III) Trication, Facile Formation of Rare Au(III) Terminal Hydroxides, and Preliminary Studies of Biological Properties.

In this paper we report on the use of [NO][BF4] to access tricationic tetrakis(pyridine)gold(III) from Au powder, a species inaccessible using the more traditional (tetrahydrothiophene)AuCl route. It is then demonstrated that this family of compounds can be used to access new terminal Au(III) hydroxides, a challenging class of compounds, and the first crystallographically characterized examples employing bidentate ligands. Finally, preliminary biological studies indicate good activity for derivatives featuring polydentate ligands against the HeLa and PC3 cell lines but also strong inhibition of primary HUVEC cells.

Labeling phospholipid membranes with lipid mimetic luminescent metal complexes.

Lipid-mimetic metallosurfactant based luminophores are promising candidates for labeling phospholipid membranes without altering their biophysical characteristics. The metallosurfactants studied exhibit high structural and physicochemical similarity to phospholipid molecules, designed to incorporate into the membrane structure without the need for covalent attachment to a lipid molecule. In this work, two lipid-mimetic phosphorescent metal complexes are described: [Ru(bpy)2(dn-bpy)](2+) and [Ir(ppy)2(dn-bpy)](+) where bpy is 2,2'-bipyridine, dn-bpy is 4,4'-dinonyl-2,2'-bipyridine and ppy is 2-phenylpyridine. Apart from being lipid-mimetic in size, shape and physical properties, both complexes exhibit intense photoluminescence and enhanced photostability compared with conventional organic fluorophores, allowing for prolonged observation. Moreover, the large Stokes shift and long luminescence lifetime associated with these complexes make them more suitable for spectroscopic studies. The complexes are easily incorporated into dimyristoil-phosphatidyl-choline (DMPC) liposomes by mixing in the organic solvent phase. DLS reveals the labeled membranes form liposomes of similar size to that of neat DMPC membrane. Synchrotron Small-Angle X-ray Scattering (SAXS) measurements confirmed that up to 5% of either complex could be incorporated into DMPC membranes without producing any structural changes in the membrane. Fluorescence microscopy reveals that 0.5% label content is sufficient for imaging. Atomic Force Microscopic imaging confirms that liposomes of the labeled bilayers on a mica surface can fuse into a flat lamellar membrane that is morphologically identical to neat lipid membranes. These results demonstrate the potential of such lipid-mimetic luminescent metal complexes as a new class of labels for imaging lipid membranes.

The fate of NHC-stabilized dicarbon.

The attempted synthesis of NHC-stabilized dicarbon (NHC=C=C=NHC) through deprotonation of a doubly protonated precursor ([NHC-CH=CH-NHC](2+) ) is reported. Rather than deprotonation, a clean reduction to NHC=CH-CH=NHC is observed with a variety of bases. The apparent resistance towards deprotonation to the target compound led to a reinvestigation of the electronic structure of NHC→CC←NHC, which showed that the highest occupied molecular orbital/lowest unoccupied molecular orbital (HOMO/LUMO) gap is likely too small to allow for isolation of this species. This is in contrast to the recent isolation of the cyclic alkylaminocarbene analogue (cAAC=C=C=cAAC), which has a large HOMO-LUMO gap. A detailed theoretical study illuminates the differences in electronic structures between these molecules, highlighting another case of the potential advantages of using cAAC rather than NHC as a ligand. The bonding analysis suggests that the dicarbon compounds are well represented in terms of donor-acceptor interactions L→C2 ←L (L=NHC, cAAC).

Electrogenerated chemiluminescence of tris(2,2' bipyridine)ruthenium(II) using common biological buffers as co-reactant, pH buffer and supporting electrolyte.

A series of aliphatic tertiary amines (HEPES, POPSO, EPPS and BIS-TRIS) commonly used to buffer the pH in biological experiments, were examined as alternative, non-toxic co-reactants for the electrogenerated chemiluminescence (ECL) of tris(2,2'-bipyridine)ruthenium(ii) ([Ru(bpy)3](2+)). These were found to be very attractive as "multi-tasking" reagents, serving not only as co-reactants, but also fulfiling the roles of pH buffer and supporting electrolyte within an aqueous environment; thus significantly simplifying the overall ECL analysis. Sub-nanomolar detection limits were obtained for [Ru(bpy)3](2+) in the presence of BIS-TRIS, making this species an valuable option for co-reactant ECL-based bioanalytical applications.

Facile formation of homoleptic Au(III) trications via simultaneous oxidation and ligand delivery from [PhI(pyridine)2](2+).

We report the first examples of Au(III) tricationic complexes bound only by neutral monodentate ligands, which are a new class of gold reagents. Oxidative addition to the bis-pyridine Au(I) cation, [Au(4-DMAP)2](+), using a series of dicationic I(III) oxidants of the general form [PhI(L)2](2+) (L = pyridine, 4-DMAP, 4-cyanopyridine) allows ready access to homoleptic and pseudo-homoleptic Au(III) complexes [Au(4-DMAP)2(L)2](3+). The facile oxidative addition of Au(I) species additionally demonstrates the efficacy of PhI(L)2](2+) reagents as halide-free oxidants for Au(I). Comparisons are made via attempts to oxidize NHC-Au(I)Cl, where introduction of the chloride anion results in complex mixtures via ligand and chloride exchange, demonstrating the advantage of using the pyridine-based homoleptic compounds. The new Au(III) trications show intriguing reactivity with water, yielding dinuclear oxo-bridged and rare terminal Au(III)-OH complexes.

Red-green-blue electrogenerated chemiluminescence utilizing a digital camera as detector.

Exploiting the distinct excitation and emission properties of concomitant electrochemiluminophores in conjunction with the inherent color selectivity of a conventional digital camera, we create a new strategy for multiplexed electrogenerated chemiluminescence detection, suitable for the development of low-cost, portable clinical diagnostic devices. Red, green and blue emitters can be efficiently resolved over the three-dimensional space of ECL intensity versus applied potential and emission wavelength. As the relative contribution ratio of each emitter to the photographic RGB channels is constant, the RGB ECL intensity versus applied-potential curves could be effectively isolated to a single emitter at each potential.

Control of excitation and quenching in multi-colour electrogenerated chemiluminescence systems through choice of co-reactant.

We demonstrate a new approach to manipulate the selective emission in mixed electrogenerated chemiluminescence (ECL) systems, where subtle changes in co-reactant properties are exploited to control the relative electron-transfer processes of excitation and quenching. Two closely related tertiary-amine co-reactants, tri-n-propylamine and N,N-diisopropylethylamine, generate remarkably different emission profiles: one provides distinct green and red ECL from [Ir(ppy)3] (ppy=2-phenylpyridinato-C2,N) and a [Ru(bpy)3](2+) (bpy=2,2'-bipyridine) derivative at different applied potentials, whereas the other generates both emissions simultaneously across a wide potential range. These phenomena can be rationalized through the relative exergonicities of electron-transfer quenching of the excited states, in conjunction with the change in concentration of the quenchers over the applied potential range.

Understanding electrogenerated chemiluminescence efficiency in blue-shifted iridium(III)-complexes: an experimental and theoretical study.

Compared to tris(2-phenylpyridine)iridium(III) ([Ir(ppy)3 ]), iridium(III) complexes containing difluorophenylpyridine (df-ppy) and/or an ancillary triazolylpyridine ligand [3-phenyl-1,2,4-triazol-5-ylpyridinato (ptp) or 1-benzyl-1,2,3-triazol-4-ylpyridine (ptb)] exhibit considerable hypsochromic shifts (ca. 25-60 nm), due to the significant stabilising effect of these ligands on the HOMO energy, whilst having relatively little effect on the LUMO. Despite their lower photoluminescence quantum yields compared with [Ir(ppy)3 ] and [Ir(df-ppy)3 ], the iridium(III) complexes containing triazolylpyridine ligands gave greater electrogenerated chemiluminescence (ECL) intensities (using tri-n-propylamine (TPA) as a co-reactant), which can in part be ascribed to the more energetically favourable reactions of the oxidised complex (M(+) ) with both TPA and its neutral radical oxidation product. The calculated iridium(III) complex LUMO energies were shown to be a good predictor of the corresponding M(+) LUMO energies, and both HOMO and LUMO levels are related to ECL efficiency. The theoretical and experimental data together show that the best strategy for the design of efficient new blue-shifted electrochemiluminophores is to aim to stabilise the HOMO, while only moderately stabilising the LUMO, thereby increasing the energy gap but ensuring favourable thermodynamics and kinetics for the ECL reaction. Of the iridium(III) complexes examined, [Ir(df-ppy)2 (ptb)](+) was most attractive as a blue-emitter for ECL detection, featuring a large hypsochromic shift (λmax =454 and 484 nm), superior co-reactant ECL intensity than the archetypal homoleptic green and blue emitters: [Ir(ppy)3 ] and [Ir(df-ppy)3 ] (by over 16-fold and threefold, respectively), and greater solubility in polar solvents.

Triamidetriamine bearing macrobicyclic and macrotricyclic ligands: potential applications in the development of copper-64 radiopharmaceuticals.

A versatile and straightforward synthetic approach is described for the preparation of triamide bearing analogues of sarcophagine hexaazamacrobicyclic cage ligands without the need for a templating metal ion. Reaction of 1,1,1-tris(aminoethyl)ethane (tame) with 3 equiv of 2-chloroacetyl chloride, yields the tris(α-chloroamide) synthetic intermediate 6, which when treated with either 1,1,1-tris(aminoethyl)ethane or 1,4,7-triazacyclononane furnished two novel triamidetriamine cryptand ligands (7 and 8 respectively). The Co(III) and Cu(II) complexes of cryptand 7 were prepared; however, cryptand 8 could not be metalated. The cryptands and the Co(III) complex 9 have been characterized by elemental analysis, (1)H and (13)C NMR spectroscopy, and X-ray crystallography. These studies confirm that the Co(III) complex 9 adopts an octahedral geometry with three facial deprotonated amido-donors and three facial amine donor groups. The Cu(II) complex 10 was characterized by elemental analysis, single crystal X-ray crystallography, cyclic voltammetry, and UV-visible absorption spectroscopy. In contrast to the Co(III) complex (9), the Cu(II) center adopts a square planar coordination geometry, with two amine and two deprotonated amido donor groups. Compound 10 exhibited a quasi-reversible, one-electron oxidation, which is assigned to the Cu(2+/3+) redox couple. These cryptands represent interesting ligands for radiopharmaceutical applications, and 7 has been labeled with (64)Cu to give (64)Cu-10. This complex showed good stability when subjected to L-cysteine challenge whereas low levels of decomplexation were evident in the presence of L-histidine.