RESUMEN
Integrating reactive radicals into membranes that resemble biological membranes has always been a pursuit for simultaneous organics degradation and water filtration. In this research, we discovered that a radical polymer (RP) that can directly trigger the oxidative degradation of sulfamethozaxole (SMX). Mechanistic studies by experiment and density functional theory simulations revealed that peroxyl radicals are the reactive species, and the radicals could be regenerated in the presence of O2. Furthermore, an interpenetrating RP network membrane consisting of polyvinyl alcohol and the RP was fabricated to demonstrate the simultaneous filtration of large molecules in the model wastewater stream and the degradation of ~ 85% of SMX with a steady permeation flux. This study offers valuable insights into the mechanism of RP-triggered advanced oxidation processes and provides an energy-efficient solution for the degradation of organic compounds and water filtration in wastewater treatment.
RESUMEN
Soluble extracellular metabolites (SEM) produced by microorganisms might significantly change during sludge bulking, which is a major operational problem caused by the excessive growth of filamentous bacteria. However, knowledge remains limited about the dynamics and potential role of SEM in the bulking of sludge. In this study, filamentous bulking was simulated in a laboratory-scale reactor and changes to SEM characteristics during the bulking process were investigated using excitation-emission matrix spectroscopy and ultrahigh-performance liquid chromatography-mass spectrometry. SEM components changed significantly at different phases of sludge bulking. Changes in SEM were closely correlated with the structure of the bacterial community. Based on the EEM profiles, significant increases in fulvic acid-like and humic acid-like substances in SEM were observed with the development of filamentous bulking. The degree of humification in SEM showed a clear increasing trend. Untargeted extracellular metabolomic analysis showed that the intensity of berberine and isorhamnetin in SEM increased significantly during the bulking phase, which might synergistically facilitate the development of filamentous bulking.
Asunto(s)
Aguas del Alcantarillado , Eliminación de Residuos Líquidos , Aguas del Alcantarillado/microbiología , Eliminación de Residuos Líquidos/métodos , Análisis Espectral , Bacterias , Espectrometría de Masas , Reactores BiológicosRESUMEN
As a thermally induced membrane separation process, membrane distillation (MD) has drawn more and more attention to the advantages of treating hypersaline wastewaters, especially the concentrate from the reverse osmosis (RO) process. One of the major obstacles in widespread MD application is the membrane fouling. We investigated the feasibility of direct contact membrane distillation (DCMD) for landfill leachate reverse osmosis concentrate (LFLRO) brine treatment and systematically assessed the efficiency of chemical cleaning for DCMD after processing LFLRO brine. The results showed that 80% water recovery rate was achieved when processing the LFLRO brine by DCMD, but membrane fouling occurred during the DCMD process, and manifested as the decreasing of permeate flux and the increasing of permeate conductivity. Analysis revealed that the serious flux reduction was primarily caused by the fouling layer, which consisted of organic matter and inorganic salts. Five cleaning methods were investigated for membrane cleaning, including hydrogen chloride (HCl)-sodium hydroxide (NaOH), ethylene diamine tetraacetic acid (EDTA)-NaOH, citric acid, sodium hypochlorite (NaClO) and sodium dodecyl sulphate (SDS) cleaning. Among the chemical cleaning methods investigated, the 3 wt.% SDS cleaning showed the best efficiency at recovering the performance of fouled membranes.
Asunto(s)
Contaminantes Químicos del Agua , Destilación , Filtración , Membranas Artificiales , Ósmosis , Contaminantes Químicos del Agua/análisisRESUMEN
To improve the mechanical properties of the electrospun nanofibrous membrane, the nonwoven fabrics and spacer fabrics were employed as support substrates to fabricate polyvinylidene fluoride (PVDF) nanofibrous composite membranes. The influences of the substrate on membrane morphology, hydrophobicity, pore size and pore size distribution, porosity, mechanical strength and permeability were comprehensive evaluated. The electrospun composite membranes had a three dimension bead-fiber interconnected open structure and a rough membrane surface. The membrane surface presented a multilevel re-entrant structure and all the water contact angles were above 140°. In contrast with the pure PVDF nanofibrous membrane, the stress at break and the elastic modulus of the composite membranes increased by 4.5-16 times and 17.5-37 times, respectively. Since the spacer fabrics had less resistance to mass transfer, the membranes composited with spacer fabrics exhibited greater permeate fluxes compared with the composite membranes with the nonwoven fabrics as substrates. During the membrane distillation test, the highest permeate flux was up to 49.3kg/m2/hr at the feed temperature of 80°C. The long-time and repeat operation of membrane distillation desalination indicated the fabricated membrane with a good resistance to scaling and wetting. The results suggested the potential of the electrospun composite membrane for membrane distillation application.
Asunto(s)
Membranas Artificiales , Nanofibras/química , Polivinilos/química , Purificación del Agua/métodos , Destilación , Interacciones Hidrofóbicas e HidrofílicasRESUMEN
In this study, real domestic wastewater treatment by forward osmosis-membrane distillation (FO-MD) integrated system was investigated in laboratory scale. The integrated membrane system presented a good separation performance and the removal efficiency of most contaminants in the domestic wastewater was higher than 90%. High molecular weight contaminants were completely removed, while a few low molecular weight contaminants permeated through the membrane. The FO membrane fouling layer mainly consisted of organic substances like polysaccharides and proteins, and was very loose and could be effectively removed by rinsing the membrane surface with tap water. By comparison, the MD membrane fouling was mainly induced by inorganic salts and was not as severe as that of the FO membrane. During 120 h continuous operation, the FO-MD integrated system exhibited satisfying performance stability and maintained a high water yield and high product water quality. The results indicated the potential of the FO-MD integrated system for municipal wastewater treatment in coastal cities, water purification and desalination.
Asunto(s)
Reactores Biológicos , Membranas Artificiales , Aguas Residuales/análisis , Destilación/métodos , Composición Familiar , Ósmosis , Eliminación de Residuos Líquidos , Contaminantes del Agua , Purificación del Agua/métodos , Calidad del AguaRESUMEN
To understand the mass transfer behaviors in hollow fiber membrane contactors, ozone fluxes affected by various conditions and membranes were investigated. For physical absorption, mass transfer rate increased with liquid velocity and the ozone concentration in the gas. Gas flow rate was little affected when the velocity was larger than the critical value, which was 6.1 × 10-3m/s in this study. For chemical absorption, the flux was determined by the reaction rate between ozone and the absorbent. Therefore, concentration, species, and pH affected the mass transfer process markedly. For different absorbents, the order of mass transfer rate was the same as the reaction rate constant, which was phenol, sodium nitrite, hydrogen peroxide, and oxalate. Five hydrophobic membranes with various properties were employed and the mass transfer behavior can be described by the Graetz-Lévèque equation for the physical absorption process. The results showed the process was controlled by liquid film and the gas phase conditions, and membrane properties did not affect the ozone flux. For the chemical absorption, gas film, membrane and liquid film affected the mass transfer together, and none of them were negligible.
Asunto(s)
Membranas Artificiales , Ozono/química , Peróxido de Hidrógeno/química , PorosidadRESUMEN
In this study, we fabricated a composite membrane for membrane distillation (MD) by modifying a commercial hydrophobic polyvinylidene fluoride (PVDF) membrane with a nanocomposite coating comprising silica nanoparticles, chitosan hydrogel and fluoro-polymer. The composite membrane exhibits asymmetric wettability, with the modified surface being in-air hydrophilic and underwater oleophobic, and the unmodified surface remaining hydrophobic. By comparing the performance of the composite membrane and the pristine PVDF membrane in direct contact MD experiments using a saline emulsion with 1000 ppm crude oil (in water), we showed that the fabricated composite membrane was significantly more resistant to oil fouling compared to the pristine hydrophobic PVDF membrane. Force spectroscopy was conducted for the interaction between an oil droplet and the membrane surface using a force tensiometer. The difference between the composite membrane and the pristine PVDF membrane in their interaction with an oil droplet served to explain the difference in the fouling propensities between these two membranes observed in MD experiments. The results from this study suggest that underwater oleophobic coating can effectively mitigate oil fouling in MD operations, and that the fabricated composite membrane with asymmetric wettability can enable MD to desalinate hypersaline wastewater with high concentrations of hydrophobic contaminants.
Asunto(s)
Destilación/instrumentación , Membranas Artificiales , Nanopartículas/química , Petróleo , Polivinilos/química , Purificación del Agua/métodos , Destilación/métodos , Emulsiones/química , Interacciones Hidrofóbicas e Hidrofílicas , Polímeros/química , Dióxido de Silicio/química , Propiedades de Superficie , Aguas Residuales/química , Purificación del Agua/instrumentación , HumectabilidadRESUMEN
A combined process was developed to inhibit the corrosion both in the pipeline of reclaimed water supplies (PRWS) and in downstream recirculating cooling water systems (RCWS) using the reclaimed water as makeup. Hydroxyl carboxylate-based corrosion inhibitors (e.g., gluconate, citrate, tartrate) and zinc sulfate heptahydrate, which provided Zn(2+) as a synergistic corrosion inhibition additive, were added prior to the PRWS when the phosphate (which could be utilized as a corrosion inhibitor) content in the reclaimed water was below 1.7 mg/L, and no additional corrosion inhibitors were required for the downstream RCWS. Satisfactory corrosion inhibition was achieved even if the RCWS was operated under the condition of high numbers of concentration cycles. The corrosion inhibition requirement was also met by the appropriate combination of PO4(3-) and Zn(2+) when the phosphate content in the reclaimed water was more than 1.7 mg/L. The process integrated not only water reclamation and reuse, and the operation of a highly concentrated RCWS, but also the comprehensive utilization of phosphate in reclaimed water and the application of non-phosphorus corrosion inhibitors. The proposed process reduced the operating cost of the PRWS and the RCWS, and lowered the environmental hazard caused by the excessive discharge of phosphate. Furthermore, larger amounts of water resources could be conserved as a result.
Asunto(s)
Ácidos Carboxílicos/química , Radical Hidroxilo/química , Temperatura , Purificación del Agua/métodos , Corrosión , Fosfatos/química , Reciclaje , Abastecimiento de Agua , Sulfato de Zinc/químicaRESUMEN
Polyethylene terephthalate mesh (PET) enhanced cellulose acetate membranes were fabricated via a phase inversion process. The membrane fabrication parameters that may affect the membrane performance were systematically evaluated including the concentration and temperature of the casting polymer solution and the temperature and time of the evaporation, coagulation and annealing processes. The water permeability and reverse salt flux were measured in forward osmosis (FO) mode for determination of the optimal membrane fabrication conditions. The optimal FO membrane shows a typical asymmetric sandwich structure with a mean thickness of about 148.2µm. The performance of the optimal FO membrane was tested using 0.2mol/L NaCl as the feed solution and 1.5mol/L glucose as the draw solution. The membrane displayed a water flux of 3.47L/(m(2)·hr) and salt rejection of 95.48% in FO mode. While in pressure retarded osmosis (PRO) mode, the water flux was 4.74L/(m(2)·hr) and salt rejection 96.03%. The high ratio of water flux in FO mode to that in PRO mode indicates that the fabricated membrane has a lower degree of internal concentration polarization than comparable membranes.
Asunto(s)
Celulosa/análogos & derivados , Filtración/instrumentación , Membranas Artificiales , Tereftalatos Polietilenos/química , Purificación del Agua/instrumentación , Celulosa/química , Interacciones Hidrofóbicas e Hidrofílicas , Ósmosis , Permeabilidad , Purificación del Agua/métodosRESUMEN
Membrane distillation (MD) has promising potential in the water purification and wastewater treatment industries; however, fouling and wetting are the main obstacles to its commercialization, and higher fluxes and energy efficiencies are essential. Magneto-responsive membranes (MagMem) with integrated magnetic nanoparticles (MNPs) enable in situ fouling mitigation and switchable separation by nano-mixing or nano-heating, triggered by external magnetic fields, in a range of membrane processes, but not yet been demonstrated in MD. This perspective discussed the potential paths of MagMem utilization in MD based on the research status and dilemmas of MD. It can be envisioned that MagMem will lead to a paradigm shift in MD, especially by in situ fouling/wetting mitigation and enhancing energy efficiency via in-place actuation and localized heating by MNPs. Moreover, remotely controllable pore tuning and specific or switchable wettability can also be anticipated. Overall, MagMem provides attractive opportunities for advanced robust and efficient MD.
Asunto(s)
Nanopartículas , Purificación del Agua , Humectabilidad , Destilación , Membranas ArtificialesRESUMEN
Posttransplant lymphoproliferative disease (PTLD) is a major therapeutic challenge that has been difficult to study using human cells because of a lack of suitable models for mechanistic characterization. Here, we show that ex vivo-differentiated B cells isolated from a subset of healthy donors can elicit pathologies similar to PTLD when transferred into immunodeficient mice. The primary driver of PTLD-like pathologies were IgM-producing plasmablasts with Epstein-Barr virus (EBV) genomes that expressed genes commonly associated with EBV latency. We show that a small subset of EBV+ peripheral blood-derived B cells expressing self-reactive, nonmutated B cell receptors (BCRs) expand rapidly in culture in the absence of BCR stimulation. Furthermore, we found that in vitro and in vivo expansion of EBV+ plasmablasts required BCR signaling. Last, treatment of immunodeficient mice with the BCR pathway inhibitor, ibrutinib, delays onset of PTLD-like pathologies in vivo. These data have implications for the diagnosis and care of transplant recipients who are at risk of developing PTLD.
Asunto(s)
Infecciones por Virus de Epstein-Barr , Trastornos Linfoproliferativos , Humanos , Animales , Ratones , Infecciones por Virus de Epstein-Barr/complicaciones , Infecciones por Virus de Epstein-Barr/terapia , Herpesvirus Humano 4 , Trastornos Linfoproliferativos/terapia , Transducción de Señal , Linfocitos BRESUMEN
Spiramycin removal from wastewater using four nanofiltration (NF) membranes (NF270, NF90, ESNA1-K1 and ESNA1-LF2-LD) was studied. The effects of operating pressure, feed temperature, feed concentration, cation and anion ions on the permeate flux rate and spiramycin rejection were investigated. The results show that increasing operating pressure resulted in the increase of both permeate flux and spiramycin rejection. The flux rate increased almost linearly with temperature, while the spiramycin rejection decreased. The permeate flux rate declined relatively with increasing feed concentration of spiramycin for NF270 and ESNA1-LF2-LD membranes compared with NF90 and ESNA1-K membranes. The presence of cations reduced spiramycin rejection, with the strength of influence for the NF270 NF membrane following the order Mg(2+)>Ca(2+)>K(+). The presence of anions also resulted in decreased spiramycin rejection, the strength of the effect following the order NO(3)(-)>Cl(-)>SO(4)(2-) for the NF270 membrane.
Asunto(s)
Filtración/instrumentación , Membranas Artificiales , Nanoestructuras , Espiramicina/química , Contaminantes Químicos del Agua/química , Temperatura , Eliminación de Residuos Líquidos/métodos , Aguas Residuales , Purificación del Agua/métodosRESUMEN
Membrane distillation (MD) is regarded as a promising technology for treatment of landfill leachate membrane concentrate (LLMC) due to its merits of low cost and high rejection of non-volatile components. However, the high concentration of pollutants in the wastewater will cause severe membrane fouling, resulting in costly cleaning and maintenance. In this study, Fenton pretreatment was applied to alleviate membrane fouling during MD treatment of LLMC. Compared to rapid flux decline of 88.2% at concentration factor (CF) of 3 for raw LLMC, MD flux only decreased by 17.4% at CF = 6 for treating acidic Fenton effluent without subsequent pH adjustment (Fe2+ and H2O2 concentration were 600 mg/L and 1457 mg/L, respectively). The pH neutralization of Fenton effluent or merely acidification of LLMC could not achieve such excellent fouling mitigation. It was concluded that both oxidation and acidification were critical and the collaboration mechanism was revealed to explain low membrane fouling. Firstly, Fenton oxidation removed organic contaminants, reduced the hydrophobicity of organic substances and increased the percentage of carboxylic group within LLMC. Thus, hydrophobic (HP) attraction was weakened but multivalent cation bridging became dominant fouling mechanism for neutral Fenton effluent. Then, acidification weakened multivalent cation bridging by inhibiting the deprotonation of carboxylic group, further mitigating membrane fouling. However, acidification of LLMC caused more severe organic fouling due to decrease in electrostatic (EL) repulsion. In addition to low membrane fouling, satisfactory total organic carbon (TOC) rejection rate of 96.23% was achieved during combined Fenton-MD process. This study demonstrated that Fenton pretreatment without pH neutralization could effectively alleviate MD fouling and elucidated the synergistic mechanism between oxidation and acidification for fouling mitigation.
Asunto(s)
Contaminantes Ambientales , Contaminantes Químicos del Agua , Destilación , Peróxido de Hidrógeno , Concentración de Iones de HidrógenoRESUMEN
The ecological behavior of bacteriophages (phages), the most abundant biological entity in wastewater treatment systems, is poorly understood, especially that of temperate phages. Here, the temporal dynamics of lytic and temperate phages in a laboratory-scale activated sludge reactor with a sludge bulking issue was investigated using coupled sludge metagenomic and viromic analyses. The lysogenic fragments (prophages) identified were widely distributed in the reconstructed metagenome-assembled genomes (61.7%, n = 227). However, only 12.3% of the identified prophages experienced lysogenic-lytic switching, and the abundance contribution of prophages to free virus communities was only 0.02-0.3%, indicating low activity of temperate phages. Although the sludge community changed dramatically during reactor operation, no massive prophage induction events were detected. Statistical analyses showed strong correlations between sludge concentration and free virus and temperate phage communities, suggesting microbial density-dependent virus dynamics in the sludge microbiota.
Asunto(s)
Bacteriófagos , Microbiota , Aguas del Alcantarillado , Lisogenia , ProfagosRESUMEN
A method of direct contact membrane distillation (DCMD) with a self-made hollow polyvinylidene fluoride membrane was applied to prepare high concentration polyaluminum chloride (PACl) with high A1b content based on chemical synthesis. The permeate flux and A1 species distribution were investigated. The experimental results showed that the permeate flux decreased from 14 to 6 kg/(m2 x hr) at the end of the DCMD process, which can be mainly attributed to the formation of NaCl deposits on the membrane surface. The Alb content decreased slightly, only from 86.3% to 84.4%, when the DCMD experiment finished, correspondingly the A1c content increased slightly from 7.2% to 8.5%, and the A1a content remained at 7% during the whole DCMD process. A PACl with A1b content of 84% at total aluminum concentration 2.2 mol/L was successfully prepared by the chemical synthesis-DCMD method.
Asunto(s)
Hidróxido de Aluminio/síntesis química , Destilación/métodos , Membranas Artificiales , Aluminio/química , Hidróxido de Aluminio/química , Conductividad Eléctrica , Microscopía Electrónica de Rastreo , Permeabilidad , Polivinilos/química , Soluciones , Espectrometría por Rayos X , Temperatura , Agua/químicaRESUMEN
Excessive discharge of phosphorus into the water bodies is the key factor to cause eutrophication. The fruit and vegetable wastewater contains large amounts of phosphorus, and it may be directly discharged into water bodies, which has a great burden on the municipal sewage pipe network. Therefore, coagulation was used to remove phosphorus, recovered the phosphorus from the wastewater into the precipitate, and then the precipitate was pyrolyzed as an efficient adsorbent for phosphate removal. By comparing the adsorption effects of adsorbents (XT-300, XT-400, and XT-500) with pyrolysis temperatures of 300 °C, 400 °C, and 500 °C on phosphate in actual phosphorus-containing wastewater and simulated phosphorus-containing wastewater at different adsorbent dosage (4 g/L, 7 g/L, and 10 g/L), it was found that XT-300 had the best performance of adsorption, and the adsorption of phosphate was endothermic and obeyed the Langmuir isotherms and Elovich kinetics. The influence of pH, coexisting anions, and the structure of XT-300 revealed that the removal of phosphate was associated with electrostatic attraction, pore filling, but could not be determined whether it was related to surface precipitation. This study provides a way and method for the recovery and utilization of phosphorus in fruit and vegetable wastewater and proves that the synthetic adsorbent was an efficient phosphorus adsorbent. In the long term, we can try to use the adsorbent after phosphorus adsorption to promote plant growth in agricultural systems.
RESUMEN
SMAD4 encodes a member of the SMAD family of proteins involved in the TGF-ß signaling pathway. Potentially heritable, autosomal dominant, gain-of-function heterozygous variants of SMAD4 cause a rare developmental disorder, the Myhre syndrome, which is associated with a wide range of developmental and post-developmental phenotypes that we now characterize as a novel segmental progeroid syndrome. Whole-exome sequencing of a patient referred to our International Registry of Werner Syndrome revealed a heterozygous p.Arg496Cys variant of the SMAD4 gene. To investigate the role of SMAD4 mutations in accelerated senescence, we generated cellular models overexpressing either wild-type SMAD4 or mutant SMAD4-R496C in normal skin fibroblasts. We found that cells expressing the SMAD4-R496C mutant exhibited decreased proliferation and elevated expression of cellular senescence and inflammatory markers, including IL-6, IFNγ, and a TGF-ß target gene, PAI-1. Here we show that transient exposure to TGF-ß, an inflammatory cytokine, followed by chronic IFNγ stimulation, accelerated rates of senescence that were associated with increased DNA damage foci and SMAD4 expression. TGF-ß, IFNγ, or combinations of both were not sufficient to reduce proliferation rates of fibroblasts. In contrast, TGF-ß alone was able to induce preadipocyte senescence via induction of the mTOR protein. The mTOR inhibitor rapamycin mitigated TGF-ß-induced expression of p21, p16, and DNA damage foci and improved replicative potential of preadipocytes, supporting the cell-specific response to this cytokine. These findings collectively suggest that persistent DNA damage and cross-talk between TGF-ß/IFNγ pathways contribute to a series of molecular events leading to cellular senescence and a segmental progeroid syndrome.
Asunto(s)
Senescencia Celular , Daño del ADN , Senescencia Celular/genética , Criptorquidismo , Daño del ADN/genética , Facies , Trastornos del Crecimiento , Deformidades Congénitas de la Mano , Humanos , Discapacidad Intelectual , Mutación , Proteína Smad4/genética , Factor de Crecimiento Transformador beta/genéticaRESUMEN
The direct contact membrane distillation applied for fluoride removal from brackish groundwater was investigated. The self-prepared polyvinylidene fluoride membrane exhibited high rejection of inorganic salt solutes. The maximum permeate flux 35.6 kg/(m2 x hr) was obtained with the feed solution at 80 degrees C and the cold distillate water at 20 degrees C. The feed concentration had no significant impact on the permeate flux and the rejection in fluoride. The precipitation of CaCO3 would clog the hollow fiber inlets and foul the membrane surface with increasing concentration factor when natural groundwater was used directly as the feed, which resulted in a rapid decline in the module efficiency. This phenomenon was diminished by acidification of the feed. The experimental results showed that the permeate flux and the quality of obtained distillate kept stable before concentration factor reached 5.0 with the acidified groundwater as feed. The membrane module efficiency began to decline gradually when the feed continued to be concentrated, which can be mainly attributed to the formation of CaF2 deposits on the membrane surface. In addition, a 300 hr continuous fluoride removal experiment of acidified groundwater was carried out with concentration factor at 4.0, the permeate flux kept stable and the permeate fluoride was not detected.
Asunto(s)
Fluoruros/aislamiento & purificación , Contaminantes Químicos del Agua/aislamiento & purificación , Destilación , Estudios de Factibilidad , Concentración de Iones de Hidrógeno , TemperaturaRESUMEN
The feasibility of employing nanofiltration for the removal of chromium (VI) from wastewater was investigated. Poly (m-phenylene isophthalamide) (PMIA) was used to fabricate asymmetric nanofiltration membrane through the phase-inversion technique. Scanning electron microscopy (SEM) and atomic force microscopy (AFM) were used to characterize the obtained membrane, and the both confirmed a much smoother surface which could reduce membrane fouling. The PMIA membrane showed different rejections to electrolytes in a sequence of Na2SO4 > MgSO4 > NaCl > MgCl2, which was similar to the sequence of the negatively charged nanofiltration membranes. Separation experiments on chromium(VI) solution were conducted at various operating conditions, such as feed concentration, applied pressure and pH. It is concluded that chromium(VI) could be effectively removed from chromium-containing wastewater by the PMIA nanofiltration membranes while maintaining their pollution resistance under alkaline condition.
Asunto(s)
Cromo/aislamiento & purificación , Filtración/métodos , Membranas Artificiales , Nanotecnología/métodos , Ácidos Ftálicos/química , Polímeros/química , Eliminación de Residuos Líquidos/métodos , Cromo/química , Purificación del Agua/métodosRESUMEN
To meet the increasing worldwide need for freshwater, it has become critical to exploit non-potable saline water. Solar membrane distillation (MD) is a promising desalination technique, which does not require conventional energy and can reduce the cost of water production. We developed a cost-effective and high-efficiency photothermal membrane that employs TiN nanoparticles as an absorber of sunlight and energy converter. Due to a strong photothermal effect, the solar energy efficiency significantly improved. With optimal membrane and MD operating conditions, we obtained an MD flux of 0.940 kg/m2âh and a solar efficiency of 64.1% under 1.0 kW/m2 solar irradiation. Compared with a bare poly(vinylidene fluoride) (PVDF) membrane, 65.8% more pure water was produced. Furthermore, the temperature polarization encountered in the conventional MD process was relieved on account of the unique interfacial heating of the photothermal coating, which also contributed to the high solar efficiency. In addition, the membrane was quite stable and the permeate water was of a high, potable quality. The as-prepared photothermal membrane demonstrated a good performance and application prospects for solar MD.