Simulations of rate of genetic gain in dry bean breeding programs.

KEY MESSAGE: A reference study for breeders aiming at maximizing genetic gain in common bean. Depending on trait heritability and genetic architecture, conventional approaches may provide an advantage over other frameworks. Dry beans (Phaseolus vulgaris L.) are a nutrient dense legume that is consumed by developed and developing nations around the world. The progress to improve this crop has been quite steady. However, with the continued rise in global populations, there are demands to expedite genetic gains. Plant breeders have been at the forefront at increasing yields in the common bean. As breeding programs are both time-consuming and resource intensive, resource allocation must be carefully considered. To assist plant breeders, computer simulations can provide useful information that may then be applied to the real world. This study evaluated multiple breeding scenarios in the common bean and involved five selection strategies, three breeding frameworks, and four different parental population sizes. In addition, the breeding scenarios were implemented in three different traits: days to flowering, white mold tolerance, and seed yield. Results from the study reflect the complexity of breeding programs, with the optimal breeding scenario varying based on trait being selected. Relative genetic gains per cycle of up to 8.69% for seed yield could be obtained under the use of the optimal breeding scenario. Principal component analyses revealed similarity between strategies, where single seed descent and the modified pedigree method would often aggregate. As well, clusters in the direction of the Hamming distance eigenvector are a good indicator of poor performance in a strategy.

Development of a Quick-Install Rapid Phenotyping System.

In recent years, there has been a growing need for accessible High-Throughput Plant Phenotyping (HTPP) platforms that can take measurements of plant traits in open fields. This paper presents a phenotyping system designed to address this issue by combining ultrasonic and multispectral sensing of the crop canopy with other diverse measurements under varying environmental conditions. The system demonstrates a throughput increase by a factor of 50 when compared to a manual setup, allowing for efficient mapping of crop status across a field with crops grown in rows of any spacing. Tests presented in this paper illustrate the type of experimentation that can be performed with the platform, emphasizing the output from each sensor. The system integration, versatility, and ergonomics are the most significant contributions. The presented system can be used for studying plant responses to different treatments and/or stresses under diverse farming practices in virtually any field environment. It was shown that crop height and several vegetation indices, most of them common indicators of plant physiological status, can be easily paired with corresponding environmental conditions to facilitate data analysis at the fine spatial scale.

Development of a Nuclear Magnetic Resonance Method and a Near Infrared Calibration Model for the Rapid Determination of Lipid Content in the Field Pea (Pisum sativum).

Pisum sativum is a leguminous crop suitable for cultivation worldwide. It is used as a forage or dried seed supplement in animal feed and, more recently, as a potential non-traditional oilseed. This study aimed to develop a low-cost, rapid, and non-destructive method for analyzing pea lipids with no chemical modifications that would prove superior to existing destructive solvent extraction methods. Different pea accession seed samples, prepared as either small portions (0.5 mm2) of endosperm or ground pea seed powder for comparison, were subjected to HR-MAS NMR analyses and whole seed samples underwent NIR analyses. The total lipid content ranged between 0.57-3.45% and 1.3-2.6% with NMR and NIR, respectively. Compared to traditional extraction with butanol, hexane-isopropanol, and petroleum ether, correlation coefficients were 0.77 (R2 = 0.60), 0.56 (R2 = 0.47), and 0.78 (R2 = 0.62), respectively. Correlation coefficients for NMR compared to traditional extraction increased to 0.97 (R2 = 0.99) with appropriate correction factors. PLS regression analyses confirmed the application of this technology for rapid lipid content determination, with trends fitting models often close to an R2 of 0.95. A better robust NIR quantification model can be developed by increasing the number of samples with more diversity.

QuLinePlus: extending plant breeding strategy and genetic model simulation to cross-pollinated populations-case studies in forage breeding.

Plant breeders are supported by a range of tools that assist them to make decisions about the conduct or design of plant breeding programs. Simulations are a strategic tool that enables the breeder to integrate the multiple components of a breeding program into a number of proposed scenarios that are compared by a range of statistics measuring the efficiency of the proposed systems. A simulation study for the trait growth score compared two major strategies for breeding forage species, among half-sib family selection and among and within half-sib family selection. These scenarios highlighted new features of the QuLine program, now called QuLinePlus, incorporated to enable the software platform to be used to simulate breeding programs for cross-pollinated species. Each strategy was compared across three levels of half-sib family mean heritability (0.1, 0.5, and 0.9), across three sizes of the initial parental population (10, 50, and 100), and across three genetic effects models (fully additive model, a mixture of additive, partial and over dominance model, and a mixture of partial dominance and over dominance model). Among and within half-sib selection performed better than among half-sib selection for all scenarios. The new tools introduced into QuLinePlus should serve to accurately compare among methods and provide direction on how to achieve specific goals in the improvement of plant breeding programs for cross breeding species.

Genome-wide association mapping of soybean chlorophyll traits based on canopy spectral reflectance and leaf extracts.

BACKGROUND: Chlorophyll is a major component of chloroplasts and a better understanding of the genetic basis of chlorophyll in soybean [Glycine max (L.) Merr.] might contribute to improving photosynthetic capacity and yield in regions with adverse environmental conditions. A collection of 332 diverse soybean genotypes were grown in 2 years (2009 and 2010) and chlorophyll a (eChl_A), chlorophyll b (eChl_B), and total chlorophyll (eChl_T) content as well as chlorophyll a/b ratio (eChl_R) in leaf tissues were determined by extraction and spectrometric determination. Total chlorophyll was also derived from canopy spectral reflectance measurements using a model of wavelet transformed spectra (tChl_T) as well as with a spectral reflectance index (iChl_T). RESULTS: A genome-wide associating mapping approach was employed using 31,253 single nucleotide polymorphisms (SNPs) to identify loci associated with the extract based eChl_A, eChl_B, eChl_R and eChl_T measurements and the two canopy spectral reflectance-based methods (tChl_T and iChl_T). A total of 23 (14 loci), 15 (7 loci) and 14 SNPs (10 loci) showed significant association with eChl_A, eChl_B and eChl_R respectively. A total of 52 unique SNPs were significantly associated with total chlorophyll content based on at least one of the three approaches (eChl_T, tChl_T and iChl_T) and likely tagged 27 putative loci for total chlorophyll content, four of which were indicated by all three approaches. CONCLUSIONS: Results presented here show that markers for chlorophyll traits can be identified in soybean using both extract-based and canopy spectral reflectance-based phenotypes, and confirm that high-throughput phenotyping-amenable canopy spectral reflectance measurements can be used for association mapping.

Genome-wide association study (GWAS) of carbon isotope ratio (δ13C) in diverse soybean [Glycine max (L.) Merr.] genotypes.

KEY MESSAGE: Using genome-wide association studies, 39 SNP markers likely tagging 21 different loci for carbon isotope ratio (δ (13) C) were identified in soybean. Water deficit stress is a major factor limiting soybean [Glycine max (L.) Merr.] yield. Soybean genotypes with improved water use efficiency (WUE) may be used to develop cultivars with increased yield under drought. A collection of 373 diverse soybean genotypes was grown in four environments (2 years and two locations) and characterized for carbon isotope ratio (δ(13)C) as a surrogate measure of WUE. Population structure was assessed based on 12,347 single nucleotide polymorphisms (SNPs), and genome-wide association studies (GWAS) were conducted to identify SNPs associated with δ(13)C. Across all four environments, δ(13)C ranged from a minimum of -30.55‰ to a maximum of -27.74‰. Although δ(13)C values were significantly different between the two locations in both years, results were consistent among genotypes across years and locations. Diversity analysis indicated that eight subpopulations could contain all individuals and revealed that within-subpopulation diversity, rather than among-subpopulation diversity, explained most (80%) of the diversity among the 373 genotypes. A total of 39 SNPs that showed a significant association with δ(13)C in at least two environments or for the average across all environments were identified by GWAS. Fifteen of these SNPs were located within a gene. The 39 SNPs likely tagged 21 different loci and demonstrated that markers for δ(13)C can be identified in soybean using GWAS. Further research is necessary to confirm the marker associations identified and to evaluate their usefulness for selecting genotypes with increased WUE.

Dissection of the E8 locus in two early maturing Canadian soybean populations.

Soybean [Glycine max (L.) Merr.] is a short-day crop for which breeders want to expand the cultivation range to more northern agro-environments by introgressing alleles involved in early reproductive traits. To do so, we investigated quantitative trait loci (QTL) and expression quantitative trait loci (eQTL) regions comprised within the E8 locus, a large undeciphered region (~7.0 Mbp to 44.5 Mbp) associated with early maturity located on chromosome GM04. We used a combination of two mapping algorithms, (i) inclusive composite interval mapping (ICIM) and (ii) genome-wide composite interval mapping (GCIM), to identify major and minor regions in two soybean populations (QS15524F2:F3 and QS15544RIL) having fixed E1, E2, E3, and E4 alleles. Using this approach, we identified three main QTL regions with high logarithm of the odds (LODs), phenotypic variation explained (PVE), and additive effects for maturity and pod-filling within the E8 region: GM04:16,974,874-17,152,230 (E8-r1); GM04:35,168,111-37,664,017 (E8-r2); and GM04:41,808,599-42,376,237 (E8-r3). Using a five-step variant analysis pipeline, we identified Protein far-red elongated hypocotyl 3 (Glyma.04G124300; E8-r1), E1-like-a (Glyma.04G156400; E8-r2), Light-harvesting chlorophyll-protein complex I subunit A4 (Glyma.04G167900; E8-r3), and Cycling dof factor 3 (Glyma.04G168300; E8-r3) as the most promising candidate genes for these regions. A combinatorial eQTL mapping approach identified significant regulatory interactions for 13 expression traits (e-traits), including Glyma.04G050200 (Early flowering 3/E6 locus), with the E8-r3 region. Four other important QTL regions close to or encompassing major flowering genes were also detected on chromosomes GM07, GM08, and GM16. In GM07:5,256,305-5,404,971, a missense polymorphism was detected in the candidate gene Glyma.07G058200 (Protein suppressor of PHYA-105). These findings demonstrate that the locus known as E8 is regulated by at least three distinct genomic regions, all of which comprise major flowering genes.

A comprehensive review of in planta stable transformation strategies.

Plant transformation remains a major bottleneck to the improvement of plant science, both on fundamental and practical levels. The recalcitrant nature of most commercial and minor crops to genetic transformation slows scientific progress for a large range of crops that are essential for food security on a global scale. Over the years, novel stable transformation strategies loosely grouped under the term "in planta" have been proposed and validated in a large number of model (e.g. Arabidopsis and rice), major (e.g. wheat and soybean) and minor (e.g. chickpea and lablab bean) species. The in planta approach is revolutionary as it is considered genotype-independent, technically simple (i.e. devoid of or with minimal tissue culture steps), affordable, and easy to implement in a broad range of experimental settings. In this article, we reviewed and categorized over 300 research articles, patents, theses, and videos demonstrating the applicability of different in planta transformation strategies in 105 different genera across 139 plant species. To support this review process, we propose a classification system for the in planta techniques based on five categories and a new nomenclature for more than 30 different in planta techniques. In complement to this, we clarified some grey areas regarding the in planta conceptual framework and provided insights regarding the past, current, and future scientific impacts of these techniques. To support the diffusion of this concept across the community, this review article will serve as an introductory point for an online compendium about in planta transformation strategies that will be available to all scientists. By expanding our knowledge about in planta transformation, we can find innovative approaches to unlock the full potential of plants, support the growth of scientific knowledge, and stimulate an equitable development of plant research in all countries and institutions.

Simulations of multiple breeding strategy scenarios in common bean for assessing genomic selection accuracy and model updating.

The aim of this study was to evaluate the accuracy of the ridge regression best linear unbiased prediction model across different traits, parent population sizes, and breeding strategies when estimating breeding values in common bean (Phaseolus vulgaris). Genomic selection was implemented to make selections within a breeding cycle and compared across five different breeding strategies (single seed descent, mass selection, pedigree method, modified pedigree method, and bulk breeding) following 10 breeding cycles. The model was trained on a simulated population of recombinant inbreds genotyped for 1010 single nucleotide polymorphism markers including 38 known quantitative trait loci identified in the literature. These QTL included 11 for seed yield, eight for white mold disease incidence, and 19 for days to flowering. Simulation results revealed that realized accuracies fluctuate depending on the factors investigated: trait genetic architecture, breeding strategy, and the number of initial parents used to begin the first breeding cycle. Trait architecture and breeding strategy appeared to have a larger impact on accuracy than the initial number of parents. Generally, maximum accuracies (in terms of the correlation between true and estimated breeding value) were consistently achieved under a mass selection strategy, pedigree method, and single seed descent method depending on the simulation parameters being tested. This study also investigated model updating, which involves retraining the prediction model with a new set of genotypes and phenotypes that have a closer relation to the population being tested. While it has been repeatedly shown that model updating generally improves prediction accuracy, it benefited some breeding strategies more than others. For low heritability traits (e.g., yield), conventional phenotype-based selection methods showed consistent rates of genetic gain, but genetic gain under genomic selection reached a plateau after fewer cycles. This plateauing is likely a cause of faster fixation of alleles and a diminishing of genetic variance when selections are made based on estimated breeding value as opposed to phenotype.

Automating high-throughput screening for anthracnose resistance in common bean using allele specific PCR.

BACKGROUND: Common beans (Phaseolus vulgaris L.) provide important protein and calories globally. Anthracnose (Colletotrichum lindemuthianum (Sacc. & Magnus) Briosi & Cavara, 1889) is a major disease in common bean and causes significant yield losses in bean production areas. Screening for markers linked to known disease resistance genes provides useful information for plant breeders to develop improved common bean varieties. The Kompetitive Allele Specific PCR (KASP) assay is an affordable genetic screening technique that can be used to accelerate breeding programs, but manual DNA extraction and KASP assay preparation are time-consuming. Several KASP markers have been developed for genes involved in resistance to bean anthracnose, which can reduce yield by up to 100%, but their usefulness is hindered by the labor required to screen a significant number of bean lines. Our research objective was to develop publicly available protocols for DNA extraction and KASP assaying using a liquid handling robot (LHR) which would facilitate high-throughput genetic screening with less active human time required. Anthracnose resistance markers were used to compare manual and automated results. RESULTS: The 12 bean anthracnose differential cultivars were screened for four anthracnose KASP markers linked to the resistance genes Co-1, Co-3 and Co-42 both by hand and with the use of an LHR. A protocol was written for DNA extraction and KASP assay thermocycling to implement the LHR. The LHR protocol reduced the active human screening time of 24 samples from 3h44 to 1h23. KASP calls were consistent across replicates but not always accurate for their known linked resistance genes, suggesting more specific markers still need to be developed. Using an LHR, information from KASP assays can be accumulated with little active human time. CONCLUSION: Results suggest that LHRs can be used to expedite time-consuming and tedious lab work such as DNA extraction or PCR plate filling. Notably, LHRs can be used to prepare KASP assays for large sample sizes, facilitating higher throughput use of genetic marker screening tools.

Eff-3DPSeg: 3D Organ-Level Plant Shoot Segmentation Using Annotation-Efficient Deep Learning.

Reliable and automated 3-dimensional (3D) plant shoot segmentation is a core prerequisite for the extraction of plant phenotypic traits at the organ level. Combining deep learning and point clouds can provide effective ways to address the challenge. However, fully supervised deep learning methods require datasets to be point-wise annotated, which is extremely expensive and time-consuming. In our work, we proposed a novel weakly supervised framework, Eff-3DPSeg, for 3D plant shoot segmentation. First, high-resolution point clouds of soybean were reconstructed using a low-cost photogrammetry system, and the Meshlab-based Plant Annotator was developed for plant point cloud annotation. Second, a weakly supervised deep learning method was proposed for plant organ segmentation. The method contained (a) pretraining a self-supervised network using Viewpoint Bottleneck loss to learn meaningful intrinsic structure representation from the raw point clouds and (b) fine-tuning the pretrained model with about only 0.5% points being annotated to implement plant organ segmentation. After, 3 phenotypic traits (stem diameter, leaf width, and leaf length) were extracted. To test the generality of the proposed method, the public dataset Pheno4D was included in this study. Experimental results showed that the weakly supervised network obtained similar segmentation performance compared with the fully supervised setting. Our method achieved 95.1%, 96.6%, 95.8%, and 92.2% in the precision, recall, F1 score, and mIoU for stem-leaf segmentation for the soybean dataset and 53%, 62.8%, and 70.3% in the AP, AP@25, and AP@50 for leaf instance segmentation for the Pheno4D dataset. This study provides an effective way for characterizing 3D plant architecture, which will become useful for plant breeders to enhance selection processes. The trained networks are available at https://github.com/jieyi-one/EFF-3DPSEG.

Improving predictive ability in sparse testing designs in soybean populations.

The availability of high-dimensional genomic data and advancements in genome-based prediction models (GP) have revolutionized and contributed to accelerated genetic gains in soybean breeding programs. GP-based sparse testing is a promising concept that allows increasing the testing capacity of genotypes in environments, of genotypes or environments at a fixed cost, or a substantial reduction of costs at a fixed testing capacity. This study represents the first attempt to implement GP-based sparse testing in soybeans by evaluating different training set compositions going from non-overlapped RILs until almost the other extreme of having same set of genotypes observed across environments for different training set sizes. A total of 1,755 recombinant inbred lines (RILs) tested in nine environments were used in this study. RILs were derived from 39 bi-parental populations of the Soybean Nested Association Mapping (NAM) project. The predictive abilities of various models and training set sizes and compositions were investigated. Training compositions included a range of ratios of overlapping (O-RILs) and non-overlapping (NO-RILs) RILs across environments, as well as a methodology to maximize or minimize the genetic diversity in a fixed-size sample. Reducing the training set size compromised predictive ability in most training set compositions. Overall, maximizing the genetic diversity within the training set and the inclusion of O-RILs increased prediction accuracy given a fixed training set size; however, the most complex model was less affected by these factors. More testing environments in the early stages of the breeding pipeline can provide a more comprehensive assessment of genotype stability and adaptation which are fundamental for the precise selection of superior genotypes adapted to a wide range of environments.

Prospects for Trifolium Improvement Through Germplasm Characterisation and Pre-breeding in New Zealand and Beyond.

Trifolium is the most used pastoral legume genus in temperate grassland systems, and a common feature in meadows and open space areas in cities and parks. Breeding of Trifolium spp. for pastoral production has been going on for over a century. However, the breeding targets have changed over the decades in response to different environmental and production pressures. Relatively small gains have been made in Trifolium breeding progress. Trifolium breeding programmes aim to maintain a broad genetic base to maximise variation. New Zealand is a global hub in Trifolium breeding, utilising exotic germplasm imported by the Margot Forde Germplasm Centre. This article describes the history of Trifolium breeding in New Zealand as well as the role and past successes of utilising genebanks in forage breeding. The impact of germplasm characterisation and evaluation in breeding programmes is also discussed. The history and challenges of Trifolium breeding and its effect on genetic gain can be used to inform future pre-breeding decisions in this genus, as well as being a model for other forage legumes.

Transpiration Rate of White Clover (Trifolium repens L.) Cultivars in Drying Soil.

Determining the performance of white clover cultivars under drought conditions is critical in dry climates. However, comparing the differences in cultivar performance requires equivalent soil water content for all plants, to reduce the water deficit threshold eliciting stomatal closure. In this study, the objective was to compare the rate of stomatal closure in eighty white clover cultivars in response to soil drying. Two glasshouse experiments were conducted, and the daily transpiration rate was measured by weighing each pot. The transpiration rate of the drought-stressed plants were normalized against the control plants to minimize effects from transpiration fluctuations and was recorded as the normalized transpiration rate (NTR). The daily soil water content was expressed as the fraction of transpirable soil water (FTSW). The FTSW threshold (FTSWc) was estimated after which the NTR decreases linearly. The FTSWc marks the critical point where the stomata start to close, and transpiration decreases linearly. The significant difference (p < 0.05) between the 10 cultivars with the highest and lowest FTSWc demonstrates the cultivars would perform better in short- or long-term droughts.

Deterministic and stochastic modelling of impacts from genomic selection and phenomics on genetic gain for perennial ryegrass dry matter yield.

Increasing the efficiency of current forage breeding programs through adoption of new technologies, such as genomic selection (GS) and phenomics (Ph), is challenging without proof of concept demonstrating cost effective genetic gain (∆G). This paper uses decision support software DeltaGen (tactical tool) and QU-GENE (strategic tool), to model and assess relative efficiency of five breeding methods. The effect on ∆G and cost ($) of integrating GS and Ph into an among half-sib (HS) family phenotypic selection breeding strategy was investigated. Deterministic and stochastic modelling were conducted using mock data sets of 200 and 1000 perennial ryegrass HS families using year-by-season-by-location dry matter (DM) yield data and in silico generated data, respectively. Results demonstrated short (deterministic)- and long-term (stochastic) impacts of breeding strategy and integration of key technologies, GS and Ph, on ∆G. These technologies offer substantial improvements in the rate of ∆G, and in some cases improved cost-efficiency. Applying 1% within HS family GS, predicted a 6.35 and 8.10% ∆G per cycle for DM yield from the 200 HS and 1000 HS, respectively. The application of GS in both among and within HS selection provided a significant boost to total annual ∆G, even at low GS accuracy rA of 0.12. Despite some reduction in ∆G, using Ph to assess seasonal DM yield clearly demonstrated its impact by reducing cost per percentage ∆G relative to standard DM cuts. Open-source software tools, DeltaGen and QuLinePlus/QU-GENE, offer ways to model the impact of breeding methodology and technology integration under a range of breeding scenarios.

Real-time, non-destructive and in-field foliage yield and growth rate measurement in perennial ryegrass (Lolium perenne L.).

BACKGROUND: In-field measurement of yield and growth rate in pasture species is imprecise and costly, limiting scientific and commercial application. Our study proposed a LiDAR-based mobile platform for non-invasive vegetative biomass and growth rate estimation in perennial ryegrass (Lolium perenne L.). This included design and build of the platform, development of an algorithm for volumetric estimation, and field validation of the system. The LiDAR-based volumetric estimates were compared against fresh weight and dry weight data across different ages of plants, seasons, stages of regrowth, sites, and row configurations. RESULTS: The project had three phases, the last one comprising four experiments. Phase 1: a LiDAR-based, field-ready prototype mobile platform for perennial ryegrassrecognition in single row plots was developed. Phase 2: real-time volumetric data capture, modelling and analysis software were developed and integrated and the resultant algorithm was validated in the field. Phase 3. LiDAR Volume data were collected via the LiDAR platform and field-validated in four experiments. Expt.1: single-row plots of cultivars and experimental diploid breeding populations were scanned in the southern hemisphere spring for biomass estimation. Significant (P < 0.001) correlations were observed between LiDAR Volume and both fresh and dry weight data from 360 individual plots (R2 = 0.89 and 0.86 respectively). Expt 2: recurrent scanning of single row plots over long time intervals of a few weeks was conducted, and growth was estimated over an 83 day period. Expt 3: recurrent scanning of single-row plots over nine short time intervals of 2 to 5 days was conducted, and growth rate was observed over a 26 day period. Expt 4: recurrent scanning of paired-row plots over an annual cycle of repeated growth and defoliation was conducted, showing an overall mean correlation of LiDAR Volume and fresh weight of R2 = 0.79 for 1008 observations made across seven different harvests between March and December 2018. CONCLUSIONS: Here we report development and validation of LiDAR-based volumetric estimation as an efficient and effective tool for measuring fresh weight, dry weight and growth rate in single and paired-row plots of perennial ryegrass for the first time, with a consistently high level of accuracy. This development offers precise, non-destructive and cost-effective estimation of these economic traits in the field for ryegrass and potentially other pasture grasses in the future, based on the platform and algorithm developed for ryegrass.

Genome-wide Association Analysis for Drought Tolerance and Associated Traits in Common Bean.

A genome-wide association study explored the genetic basis of variation for drought tolerance and related traits in a Middle American diversity panel comprising 96 common bean ( L.) genotypes. The panel was grown under irrigated and rainfed conditions and single nucleotide polymorphism (SNP) data were used to explore the genetic diversity and ancestry of the panel. Varying levels of admixtures and distinctly divergent individuals were observed. Estimations of genome-wide heterozygosity revealed that, on average, greater diversity is present in individuals with Mesoamerica (3.8%) ancestry, followed by admixed individuals (2.3%). The race Durango had the lowest level of heterozygosity (1.4%). We report 27 significant marker-trait associations based on best linear unbiased predictors. These associations include seven markers for shoot biomass at harvest under irrigation and five markers under rainfed conditions on () chromosome 11, two markers for shoot biomass at flowering under irrigation on 02 and 08, two markers for seed size under irrigated and rainfed conditions on 09, seven markers for lodging score under irrigation on 02 and 07, one marker for leaf elongation rate on 03 and one for wilting score on 11. Positional candidate genes, including on 11, associated with wilting, were identified. The SNP ss715639327 marker was located in the exon region of the gene, which codes for an aquaporin associated with water movement in beans. Significant quantitative trait loci identified in this study could be used in marker-assisted breeding to accelerate genetic improvement of drought tolerance in common bean.

Genome-Wide Association Analysis of Diverse Soybean Genotypes Reveals Novel Markers for Nitrogen Traits.

Nitrogen is a primary plant nutrient that plays a major role in achieving maximum economic yield. Insufficient availability most often limits soybean [Glycine max (L.) Merr.] crop growth. Symbiotic N2 fixation in soybean is highly sensitive to limited water availability, and breeding for reduced N2 fixation sensitivity to drought is considered an important objective to improve yields under drought. The objective of this study was to identify single nucleotide polymorphism (SNP) markers associated with N traits. A collection of 373 diverse soybean genotypes were grown in four field environments (2 yr and two locations) and characterized for N derived from atmosphere (Ndfa), N concentration ([N]), and C/N ratio. The population structure of 373 soybean genotypes was assessed based on 31,145 SNPs and genome-wide association analysis using a unified mixed model identified SNPs associated with Ndfa, [N], and C/N ratio. Although the Ndfa, [N], and C/N ratio values were significantly different between the two locations in both years, results were consistent among genotypes across years and locations. While numerous SNPs were identified by association analysis for each trait in only one of the four environments, 17, 19, and 24 SNPs showed a significant association with Ndfa, [N], and C/N ratio, respectively, in at least two environments as well as with the average across all four environments. These markers represent an important resource for pyramiding favorable alleles for drought tolerance and for identifying extremes for comparative physiological studies.