Inactivation of Bacteria in Water by Ferrate(VI): Efficiency and Mechanisms.

Ferrate (Fe(VI)) is an emerging green disinfectant and has received increasing attention nowadays. This study conducted systematic analyses of Fe(VI) disinfection on six typical bacteria in different water matrices. The results showed that Fe(VI) was more effective in inactivating Gram-negative (G-) bacteria than Gram-positive (G+) bacteria, and the disinfection performance of Fe(VI) was better in a phosphate buffer than that in a borate buffer and secondary effluent. The inactivation rate constants of G- bacteria were significantly higher than those of G+ bacteria. The cell membrane damage of G- bacteria was also more severe than that of G+ bacteria after Fe(VI) treatment. The cell wall structure, especially cell wall thickness, might account for the difference of the inactivation efficiency between G- bacteria and G+ bacteria. Moreover, it is revealed that Fe(VI) primarily reacted with proteins rather than other biological molecules (i.e., phospholipids, peptidoglycan, and lipopolysaccharide). This was further evidenced by the reduction of bacterial autofluorescence due to the destruction of bacterial proteins during Fe(VI) inactivation. Overall, this study advances the understanding of Fe(VI) disinfection mechanisms and provides valuable information for the Fe(VI) application in water disinfection.

Microalgae Commercialization Using Renewable Lignocellulose Is Economically and Environmentally Viable.

Conventional phototrophic cultivation for microalgae production suffers from low and unstable biomass productivity due to limited and unreliable light transmission outdoors. Alternatively, the use of a renewable lignocellulose-derived carbon source, cellulosic hydrolysate, offers a cost-effective and sustainable pathway to cultivate microalgae heterotrophically with high algal growth rate and terminal density. In this study, we evaluate the feasibility of cellulosic hydrolysate-mediated heterotrophic cultivation (Cel-HC) for microalgae production by performing economic and environmental comparisons with phototrophic cultivation through techno-economic analysis and life cycle assessment. We estimate a minimum selling price (MSP) of 4722 USD/t for producing high-purity microalgae through Cel-HC considering annual biomass productivity of 300 t (dry weight), which is competitive with the conventional phototrophic raceway pond system. Revenues from the lignocellulose-derived co-products, xylose and fulvic acid fertilizer, could further reduce the MSP to 2976 USD/t, highlighting the advantages of simultaneously producing high-value products and biofuels in an integrated biorefinery scheme. Further, Cel-HC exhibits lower environmental impacts, such as cumulative energy demand and greenhouse gas emissions, than phototrophic systems, revealing its potential to reduce the carbon intensity of algae-derived commodities. Our results demonstrate the economic and environmental competitiveness of heterotrophic microalgae production based on renewable bio-feedstock of lignocellulose.

Biology and morphometric relationship of gall inducers Contarinia sp. and corresponding parasitoids for swollen galls of Nitraria sibirica pall.

Galls function as provide shelter for gall inducers, guarding them against their natural enemies. Previous research has illuminated the interactions between galls, gall inducers, and their corresponding parasitoids within various caltrop plants. However, less is known about these relationships within Nitraria sibirica, particularly regarding the efficacy of parasitism. Therefore, this study aimed to identify the morphometric relationships among the swollen galls, gall inducers, and their parasitoids. Two species of gall inducers and three species of parasitoids were obtained from the swollen galls of N. sibirica. The correlations of the parasitization indexes, the lifespan of gall inhabitants, and temperature and the morphometric relationships between the galls and their inhabitants were analyzed. The dominant gall inducer identified was Contarinia sp. (Diptera: Cecidomyiidae). Furthermore, it was observed that three solitary parasitoids attacked Contarinia sp. in the swollen galls, with only Eupelmus gelechiphagus acting as an idiobiont ectoparasitoid. The dominant parasitoids were Platygaster sp. and Cheiloneurus elegans at sites 1 and 2, respectively, with Platygaster sp. displaying greater abundance than C. elegans in the swollen galls. The lifespan of the gall inhabitants shortened gradually as the temperature increased. Moreover, the optimal number of gall chambers ranged from two to four per swollen gall with maximized fitness, which can be considered the optimal population density for the gall inducer Contarinia sp. Morphometric analysis exhibited a strong linear correlation between gall size and chamber number or the number of gall inhabitants, as well as a weak correlation between gall size and body size of the primary inhabitants of swollen galls. Our results highlight the importance of the biological investigation of parasitoids and gall inducers living in closed galls with multiple chambers and may pave the way for potential application in biological control.

Improvement in municipal wastewater treatment alters lake nitrogen to phosphorus ratios in populated regions.

Large-scale and rapid improvement in wastewater treatment is common practice in developing countries, yet this influence on nutrient regimes in receiving waterbodies is rarely examined at broad spatial and temporal scales. Here, we present a study linking decadal nutrient monitoring data in lakes with the corresponding estimates of five major anthropogenic nutrient discharges in their surrounding watersheds over time. Within a continuous monitoring dataset covering the period 2008 to 2017, we find that due to different rates of change in TN and TP concentrations, 24 of 46 lakes, mostly located in China's populated regions, showed increasing TN/TP mass ratios; only 3 lakes showed a decrease. Quantitative relationships between in-lake nutrient concentrations (and their ratios) and anthropogenic nutrient discharges in the surrounding watersheds indicate that increase of lake TN/TP ratios is associated with the rapid improvement in municipal wastewater treatment. Due to the higher removal efficiency of TP compared with TN, TN/TP mass ratios in total municipal wastewater discharge have continued to increase from a median of 10.7 (95% confidence interval, 7.6 to 15.1) in 2008 to 17.7 (95% confidence interval, 13.2 to 27.2) in 2017. Improving municipal wastewater collection and treatment worldwide is an important target within the 17 sustainable development goals set by the United Nations. Given potential ecological impacts on biodiversity and ecosystem function of altered nutrient ratios in wastewater discharge, our results suggest that long-term strategies for domestic wastewater management should not merely focus on total reductions of nutrient discharges but also consider their stoichiometric balance.

Mass Spectrometry-Based Proteomics for Discovering Salivary Biomarkers in Periodontitis: A Systematic Review.

Periodontitis is one of the primary causes of tooth loss, and is also related to various systemic diseases. Early detection of this condition is crucial when it comes to preventing further oral damage and the associated health complications. This study offers a systematic review of the literature published up to April 2023, and aims to clearly explain the role of proteomics in identifying salivary biomarkers for periodontitis. Comprehensive searches were conducted on PubMed and Web of Science to shortlist pertinent studies. The inclusion criterion was those that reported on mass spectrometry-driven proteomic analyses of saliva samples from periodontitis cohorts, while those on gingivitis or other oral diseases were excluded. An assessment for risk of bias was carried out using the Newcastle-Ottawa Scale and Quality Assessment of Diagnostic Accuracy Studies or the NIH quality assessment tool, and a meta-analysis was performed for replicable candidate biomarkers, i.e., consistently reported candidate biomarkers (in specific saliva samples, and periodontitis subgroups, reported in ≥2 independent cohorts/reports) were identified. A Gene Ontology enrichment analysis was conducted using the Database for Annotation, Visualization, and Integrated Discovery bioinformatics resources, which consistently expressed candidate biomarkers, to explore the predominant pathway wherein salivary biomarkers consistently manifested. Of the 15 studies included, 13 were case-control studies targeting diagnostic biomarkers for periodontitis participants (periodontally healthy/diseased, n = 342/432), while two focused on biomarkers responsive to periodontal treatment (n = 26 participants). The case-control studies were considered to have a low risk of bias, while the periodontitis treatment studies were deemed fair. Summary estimate and confidence/credible interval, etc. determination for the identified putative salivary biomarkers could not be ascertained due to the low number of studies in each case. The results from the included case-control studies identified nine consistently expressed candidate biomarkers (from nine studies with 230/297 periodontally healthy/diseased participants): (i) those that were upregulated: alpha-amylase, serum albumin, complement C3, neutrophil defensin, profilin-1, and S100-P; and (ii) those that were downregulated: carbonic anhydrase 6, immunoglobulin J chain, and lactoferrin. All putative biomarkers exhibited consistent regulation patterns. The implications of the current putative marker proteins identified were reviewed, with a focus on their potential roles in periodontitis diagnosis and pathogenesis, and as putative therapeutic targets. Although in its early stages, mass spectrometry-based salivary periodontal disease biomarker proteomics detection appeared promising. More mass spectrometry-based proteomics studies, with or without the aid of already available clinical biochemical approaches, are warranted to aid the discovery, identification, and validation of periodontal health/disease indicator molecule(s). Protocol registration number: CRD42023447722; supported by RD-02-202410 and GRF17119917.

Synergistic Nanowire-Enhanced Electroporation and Electrochlorination for Highly Efficient Water Disinfection.

Conventional water disinfection methods such as chlorination typically involve the generation of harmful disinfection byproducts and intensive chemical consumption. Emerging electroporation disinfection techniques using nanowire-enhanced local electric fields inactivate microbes by damaging their outer structures without byproduct formation or chemical dosing. However, this physical-based method suffers from a limited inactivation efficiency under high water flux due to an insufficient contact time. Herein, we integrate electrochlorination with nanowire-enhanced electroporation to achieve a synergistic flow-through process for efficient water disinfection targeting bacteria and viruses. Electroporation at the cathode induces sub-lethal damages on the microbial outer structures. Subsequently, electrogenerated active chlorine at the anode aggravates these electroporation-induced injuries to the level of lethal damage. This sequential flow-through disinfection system achieves complete disinfection (>6.0-log) under a very high water flux of 2.4 × 104 L/(m2 h) with an applied voltage of 2.0 V. This disinfection efficiency is 8 times faster than that of electroporation alone. Further, the specific energy consumption for the disinfection by this novel process is extremely low (8 × 10-4 kW h/m3). Our results demonstrate a promising method for rapid and energy-efficient water disinfection by coupling electroporation with electrochlorination to meet vital needs for pathogen elimination.

Evaluation of Fe(VI)/Fe(II) combined with sludge adsorbents in secondary effluent organic matter removal.

Wastewater reclamation and reuse are important methods that help to achieve an equilibrium within demand and offer, and also one of the important ways to reduce carbon emission. The existence of secondary effluent organic matter (EfOM) will bring potential threat to the environment in reuse process. Therefore, it is important to develop reclaimed water reuse technology that effectively remove EfOM. In this study, the removal of EfOM performance of ferrates enhanced by FeCl2 (Fe(VI)/Fe(II)) combined with sludge adsorbents (SAs) was evaluated by using the continuous-flow process (FeSDF), which was composed of Fe(VI)/Fe(II), SAs, densadeg and filtration. The results showed that when the inflow rate was 1 L/h, the optimal operating conditions of FeSDF including 5 mg/L of Fe(VI), 1 mg/L of Fe(II), 1 g/L of SA and 50% of the reflux ratio. Bulk organic indicators, including chemical oxygen demand, dissolved organic carbon, ammonia, total nitrogen, total phosphorus, turbidity, and ultraviolet absorbance at 254 nm in the effluent met the water quality standard for scenic environment use (GB/T 18921-2019 in China). The addition of Fe(II) makes the coagulation process by Fe(VI) produce more Fe(III) and produce more quality of sedimentary flocs and improve the removal efficiency of EfOM. The removal of organic micro-pollutants (OMPs) was mainly due to ferrate oxidation and SA adsorption in FeSDF, and the removal of most of the OMPs was more than 90%. The total fluorescence intensity removal efficiency in FeSDF was 63.8%. Moreover, the genotoxicity of the FeSDF effluent decreased to 0.73 µg 4-nitroquiniline-N-oxide/L, and the reduction efficiency reached 97.6%. The actual efficiency of most of the indicators is greater than the expected efficiency, indicating that there is a synergistic comprehensive effect during the whole process operation of FeSDF.

Biology, parasitoid complex and potential distribution of saxaul's dominant defoliators, Teia dubia (Lepidoptera: Lymantriidae).

Natural enemies that impact pest populations must be understood in order to build integrated pest control strategies and to understand the most important aspects affecting pest dynamics. Haloxylon ammodendron (C. A. Mey.) Bunge is an important perennial plant species extensively used in sand stabilization and wind prevention in arid areas. This study aimed to determine the main defoliators that damage H. ammodendron and the parasitoid complex associated with them. Twelve species of defoliators were found in Northern Xinjiang, and Teia dubia (Tauscher) (Lepidoptera: Lymantriidae), Scrobipalpa sp. (Lepidoptera: Gelechiidae), and Eucharia festiva Hüfnagel (Lepidoptera: Arctiidae) were the dominant pests. T. dubia is the predominant defoliator with three generations a year. Northwest China, Central Asia, and the Mediterranean region are potentially suitable habitats for T. dubia in the world, while Xinjiang is the primary distribution area in China. Parasitoids belonging to seven species and four families were reared from the larvae of T. dubia, they were all endoparasitoids and koinobiont. Cotesia sp. (Hymenoptera: Braconidae) is the dominant parasitoid and prefer to parasitic in the 3rd-5th instar larvae. The present study provides the basis for understanding the species composition and natural enemies of lepidopteran defoliators. It will be an effective tool for the integrated pest management programs of H. ammodendron forest.

Removal of methylisothiazolinone biocide from wastewater by VUV/UV advanced oxidation process: Kinetics, mechanisms and toxicity.

Methylisothiazolinone (MIT) is frequently used as antimicrobial in household and industrial products, and poses ecological and health risks to aquatic organisms and humans. In this study, vacuum ultraviolet (VUV)/ultraviolet (UV) irradiation was found highly efficient for removal of MIT. The rate constant of MIT degradation (kobs) under VUV/UV irradiation was 3.75 µEinstein-1 cm2, which was around 12.5 times higher than that under UV irradiation. The •OH concentration during the VUV/UV process was 1.0 × 10-12 M. The contributions of UV photolysis and •OH oxidation to MIT degradation under VUV/UV irradiation were 7.3% and 92.7%, respectively. The optimum solution pH (6.0-7.1) gave kobs 33%-39% higher than those at pH 3.9 and 9.3. CO32-/HCO3- inhibited MIT degradation and the kobs decreased by 74% when the concentration of CO32-/HCO3- was increased to 1 mM. The order of MIT removal efficiency under VUV/UV irradiation was ultrapure water > secondary effluent > reverse osmosis (RO) concentrate, because of the light screening and •OH quenching effect of actual wastewater. In RO concentrate, the rate constant of MIT degradation under VUV/UV irradiation was 22% higher than that obtained under UV irradiation. The reduction of TOC, UV254, and total fluorescence regional integration of the RO concentrate during VUV/UV process were 7.2%, 34.9%, and 52.3%, respectively. Twelve main transformation products of MIT were identified after VUV/UV degradation. The main degradation mechanisms of MIT were sulfur atom oxidation and hydroxyl addition. Quantitative structure-activity relationship analysis showed that VUV/UV degradation was an efficient method to remove the toxicity of MIT.

Wastewater treatment and reuse situations and influential factors in major Asian countries.

As Asia is the most populous continent in the world, the contradiction between water supply and demand is increasing. Wastewater treatment and reclaimed water use are important means to solve the contradiction between supply and demand and realize the sustainability of the water management system. Based on the data collected from 48 typical countries and regions in Asia, this study evaluates the possible influential factors on wastewater treatment and reclaimed water use such as Gross Domestic Product (GDP) level, water resource availability, water withdrawn and water stress. It is identified that per capita GDP and water stress are important factors affecting wastewater treatment and reclaimed water use. Although reclaimed water use in most Asian countries is still at the early stage, the development of wastewater treatment is conducive to the development of reclaimed water. The results of this study are believed to be useful in improving water management and sustainability levels in Asian countries.

Ammonia-Mediated Bromate Inhibition during Ozonation Promotes the Toxicity Due to Organic Byproduct Transformation.

Ammonia (NH4+) and hydrogen peroxide (H2O2) have been widely used to inhibit bromate formation during ozonation. However, organic byproducts can also pose a risk under these conditions. During bromate inhibition, the influence of NH4+ and H2O2 on organic byproducts and their toxicity should be elucidated. Our study found that NH4+ suppressed organic bromine, but might result in increased toxicity. Adding 0.5 mg/L of NH4+-N substantially increased both the formation of cytotoxicity and genotoxicity (DNA double-strand breaks) of organic byproducts from 0.6 to 1.6 mg-phenol/L, and from 0.3 to 0.8 µg-4-NQO/L (0.5 mg/L Br-, 5 mg/L O3). NH4+ decreased bromate, but increased the overall toxicity of the integrated byproducts (organic byproducts and bromate). Organic nitrogen measurements and 15N isotope analysis showed enhanced incorporation of nitrogen into organic matter when NH4+ and Br- coexisted during ozonation. NH4+ decreased the formation of brominated acetonitriles, but enhanced the formation of brominated nitromethanes and brominated acetamides. These brominated nitrogenous byproducts were partially responsible for this increase in toxicity. Different from ammonia, H2O2 could reduce both bromate and the toxicity of organic byproducts. In the presence of 0.5 mg/L Br- and 10 mg/L O3, adding H2O2 (0.5 mM) substantially suppressed bromate, cytotoxicity formation and genotoxicity formation by 88%, 63% and 67%. This study highlights that focusing on bromate control with NH4+ addition might result in higher toxicity. Efforts are needed to effectively control the toxicities of bromate and organic byproducts simultaneously.

Carbon Fiber-Based Flow-Through Electrode System (FES) for Water Disinfection via Direct Oxidation Mechanism with a Sequential Reduction-Oxidation Process.

Flow-through configuration for electrochemical disinfection is considered as a promising approach to minimize the formation of toxic byproducts and energy consumption via the enhanced convective mass transport as compared with conventional flow-by one. Under this hydrodynamic condition, it is essential to ascertain the effect of sequential electro-redox processes with the cathode/anode then anode/cathode arrangements on disinfection performance. Here, carbon fiber felt (CFF) was utilized to construct two flow-through electrode systems (FESs) with sequential reduction-oxidation (cathode-anode) or oxidation-reduction (anode-cathode) processes to systematically compare their disinfection performance toward a model Escherichia coli ( E. coli) pathogen. In-situ sampling and live/dead backlight staining experiments revealed that E. coli inactivation mainly occurred on anode via an adsorption-inactivation-desorption process. In reduction-oxidation system, after the cathode-pretreatment, bulk solution pH increased significantly, leading to the negative charge of E. coli cells. Hence, E. coli cells were adsorbed and inactivated easily on the subsequent anode, finally resulting in its much better disinfection performance and energy efficiency than the oxidation-reduction system. Application of 3.0 V resulted in ∼6.5 log E. coli removal at 1500 L m-2 h-1 (50 mL min-1), suggesting that portable devices can be designed from CFF-based FES with potential application for point-of-use water disinfection.

UV/chlorine oxidation of the phosphonate antiscalant 1-Hydroxyethane-1, 1-diphosphonic acid (HEDP) used for reverse osmosis processes: Organic phosphorus removal and scale inhibition properties changes.

Reverse osmosis (RO) technology plays an increasingly important role in municipal wastewater reclamation. However, the antiscalants used in RO systems showed adverse effects to the ecosystem: impending the removal of hardness from RO concentrates; inducing phosphorus pollution in receiving water; enhancing the trace metal migration in the environment. In this study, UV/chlorine advanced oxidation process was used to oxidize a typical phosphoric antiscalant (1-Hydroxyethane-1, 1-diphosphonic Acid, HEDP). UV/chlorine showed significant synergetic effects on HEDP degradation compared to UV irradiation or chlorination alone. Compared to UV/H2O2 oxidation, UV/chlorine process is more efficient for HEDP transformation with chlorine dosages ranging from 0.1 to 0.4 mmoL/L. Chorine dosage showed dual effects on HEDP oxidation by UV/chlorine: the increasing trend of transformation efficiency of HEDP got slower with increasing chlorine dosage. The transformation efficiency of HEDP by UV/chlorine oxidation decreased from 39% to 14% with pH increasing from 4.5 to 9.0, likely due to the higher quantum yields and lower radical quenching rates of HOCl than those of OCl-. The transformation efficiency of HEDP decreased 14% and 42% with 30 mM of chloride and bicarbonate, respectively. The presence of nitrate promoted the oxidation of HEDP by UV/chlorine: the transformation efficiency increased 5% and 83% with the presence of 5 mM and 30 mM nitrate, respectively. Based on the static scale inhibition tests, UV/chlorine oxidation is effective at removing the scale inhibition ability of HEDP. During UV/chlorine process, the maximum scale inhibition ratio decreased from 66% to 34% as the removal of phosphonate ligand from HEDP increased to 80%.

Formation and control of disinfection byproducts and toxicity during reclaimed water chlorination: A review.

Chlorination is essential to the safety of reclaimed water; however, this process leads to concern regarding the formation of disinfection byproducts (DBPs) and toxicity. This study reviewed the formation and control strategies for DBPs and toxicity in reclaimed water during chlorination. Both regulated and emerging DBPs have been frequently detected in reclaimed water during chlorination at a higher level than those in drinking water, indicating they pose a greater risk to humans. Luminescent bacteria and Daphnia magna acute toxicity, anti-estrogenic activity and cytotoxicity generally increased after chlorination because of the formation of DBPs. Genotoxicity by umu-test and estrogenic activity were decreased after chlorination because of destruction of toxic chemicals. During chlorination, water quality significantly impacted changes in toxicity. Ammonium tended to attenuate toxicity changes by reacting with chlorine to form chloramine, while bromide tended to aggravate toxicity changes by forming hypobromous acid. During pretreatment by ozonation and coagulation, disinfection byproduct formation potential (DBPFP) and toxicity formation potential (TFP) occasionally increase, which is accompanied by DOC removal; thus, the decrease of DOC was limited to indicate the decrease of DBPFP and TFP. It is more important to eliminate the key fraction of precursors such as hydrophobic acid and hydrophilic neutrals. During chlorination, toxicities can increase with the increasing chlorine dose and contact time. To control the excessive toxicity formation, a relatively low chlorine dose and short contact time were required. Quenching chlorine residual with reductive reagents also effectively abated the formation of toxic compounds.

Nanowire-Modified Three-Dimensional Electrode Enabling Low-Voltage Electroporation for Water Disinfection.

More than 10% of the people in the world still suffer from inadequate access to clean water. Traditional water disinfection methods (e.g., chlorination and ultraviolet radiation) include concerns about the formation of carcinogenic disinfection byproducts (DBPs), pathogen reactivation, and/or excessive energy consumption. Recently, a nanowire-assisted electroporation-disinfection method was introduced as an alternative. Here, we develop a new copper oxide nanowire (CuONW)-modified three-dimensional copper foam electrode using a facile thermal oxidation approach. An electroporation-disinfection cell (EDC) equipped with two such electrodes has achieved superior disinfection performance (>7 log removal and no detectable bacteria in the effluent). The disinfection mechanism of electroporation guarantees an exceedingly low operation voltage (1 V) and level of energy consumption (25 J L(-1)) with a short contact time (7 s). The low operation voltage avoids chlorine generation and thus reduces the potential of DBP formation. Because of irreversible electroporation damage on cell membranes, no regrowth and/or reactivation of bacteria occurs during storage after EDC treatment. Water disinfection using EDCs has great potential for practical applications.

Investigation of the characteristics of biofilms grown in gas-phase biofilters with and without ozone injection by CLSM technique.

Recently, ozone injection technique was developed as a novel biomass control method to reduce bed clogging in biofilters treating volatile organic compounds (VOCs). However, the effects of ozone on the characteristics of biofilms are still unknown. In this study, two identical lab-scale biofilters treating gaseous toluene were operated in parallel except that one was continuously injected with 200 mg/m(3) ozone. Four glass slides were placed inside each biofilter on day 57 and then were taken out sequentially after 1, 2, 4, and 6 weeks of cultivation. The biofilms grown on the glass slides were stained by the ViaGram™ Red + Bacterial Gram Stain and Viability Kit and observed through the confocal laser scanning microscopy (CLSM). According to the CLSM images of 1, 2, and 4 weeks, the ozonated biofilm was significantly thinner than the control biofilm, which demonstrated that ozone could effectively control the biomass in the biofilter. For the biofilter without ozone injection, the ratios of viable cells (0.51~0.89) and the ratios of Gram-positive bacteria (0.22~0.57) both decreased within 4 weeks of cultivation. The CLSM image analysis results also demonstrated that a continuous injection of 200 mg/m(3) ozone was able to significantly enhance the ratio of viable cells to 0.77~0.97 and allow the dominance of Gram-positive bacteria in the biofilms with the ratio 0.46~0.88 instead of Gram-negative bacteria. For the 6-week samples, the biofilm thickness of the control system was reduced significantly which indicated the detachment of accumulated biofilms might occur in the samples without ozone.

Shifts of live bacterial community in secondary effluent by chlorine disinfection revealed by Miseq high-throughput sequencing combined with propidium monoazide treatment.

Chlorine disinfection is a commonly used disinfection process in wastewater treatment, but its effects on the indigenous bacterial community in treated wastewater have not been fully elucidated. In this study, secondary effluent samples collected in four wastewater treatment plants (WWTPs) were selected for chlorine disinfection. Shifts in the bacterial community compositions in secondary effluent samples upon chlorine disinfection, both immediately and after 24 h of storage, were investigated using Illumina MiSeq sequencing combined with propidium monoazide (PMA) treatment. The results showed that the phylum Proteobacteria was sensitive to chlorine, with the relative proportions of Proteobacteria decreased from 39.2 to 75.9 % in secondary effluent samples to 7.5 to 62.2 % immediately after chlorine disinfection. The phylogenetic analysis indicated that the most dominant genera belonging to Proteobacteria were sensitive to chlorine. In contrast, the phyla Firmicutes and Planctomycetes showed a certain resistance to chlorine, with their relative proportions increasing from 5.1 to 23.1 % and 0.8 to 9.3 % to 11.3 to 44.6 % and 1.5 to 13.3 %, respectively. Most dominant genera belonging to Firmicutes showed resistance to chlorine. A significant reduction in the richness and diversity of the bacterial community was observed after 24 h of storage of chlorinated secondary effluent. During the 24-h storage process, the relative proportions of most dominant phyla shifted in reverse from the changes induced by chlorine disinfection. Overall, chlorine disinfection not only changes the bacterial community compositions immediately after the disinfection process but also exerts further impacts over a longer period (24 h).

Effective degradation of methylisothiazolone biocide using ozone: Kinetics, mechanisms, and decreases in toxicity.

Methylisothiazolone (MIT) is a common biocide that is widely used in water-desalination reverse-osmosis processes. The transformation of MIT during water treatment processes is poorly understood. The kinetics and mechanisms involved in the degradation of MIT during ozonation were investigated in this study. Ozonation was found to be a useful way of degrading MIT in water, and the degradation rate constant was 0.11 (±0.1) × 103 L/(mol·s). The degradation rate constant did not change when the pH was increased from 3 to 9. The pre-exponential factor A and the activation energy Ea for the ozonation process were 7.564 × 1013 L/(mol·s) and 66.74 kJ/mol, respectively. The decrease in the MIT concentration and the amount of ozone consumed were measured, and the stoichiometric factor α for the ozone consumption to MIT removal ratio was found to be 1.8. Several ozonation products were detected using time-of-flight mass spectrometry. Almost 32% of the organic sulfur in the MIT was oxidized to release sulfate ions, which caused a decrease in pH. Sulfur atoms were oxidized to sulfone species and then hydrolyzed to give sulfate during ozonation. Addition reactions involving carbon-carbon double bonds and the oxidation of α-carbon atoms also occurred. MIT was found to be lethal to Daphnia magna Straus (D. magna) with a median lethal concentration of 18.2 µmol/L. Even though the primary ozonation products of MIT still showed some toxicity to D. magna, ozone could minimize the toxic effect after a long reaction time.

Characterization of dissolved organic matter in the secondary effluent of pulp and paper mill wastewater before and after coagulation treatment.

Meeting the regulatory discharge standards for pulp and paper mill wastewater has become ever more difficult because of its recalcitrant and colored dissolved organic matter (DOM). In this study, the variation of DOM from the secondary effluent of pulp and paper mill wastewater before and after coagulation was investigated based on hydrophobicity/hydrophilicity, apparent molecular weight (MW) and fluorescence. DOM fractions of the secondary effluent were all with the apparent MW <20 kDa. Particularly, the hydrophobic acids (HOA) fraction, mainly composed of humic-like materials, was the major component, and it also had the highest color and SUVA254 (UV254 to dissolved organic carbon ratio). Hydrophilic bases (HIB) and hydrophilic neutrals (HIN) fractions were the other important parts besides HOA. Coagulation can remove all DOM fractions to different extent, and it was more effective for organic compounds with MW > 5 kDa. The removal efficiencies of humic-like, fulvic-like and soluble microbial by-product-like constituents in HOA and HIB fractions were much higher than in other fractions. Even so, the coagulation effluent still contained large amounts of contaminants with complicated fluorophores and apparent MW <5 kDa, and HOA and HIN fractions were also the major parts in the coagulation effluent.