RESUMEN
Revealing the intrinsic relationships between the structure, properties, and performance of the electrochemical interface is a long-term goal in the electrochemistry and surface science communities because it could facilitate the rational design of electrochemical devices. Achieving this goal requires in situ characterization techniques that provide rich chemical information and high spatial resolution. Electrochemical tip-enhanced Raman spectroscopy (EC-TERS), which provides molecular fingerprint information with nanometer-scale spatial resolution, is a promising technique for achieving this goal. Since the first demonstration of this technique in 2015, EC-TERS has been developed for characterizing various electrochemical processes at the nanoscale and molecular level. Here, we review the development of EC-TERS over the past 5 years. We discuss progress in addressing the technical challenges, including optimizing the EC-TERS setup and solving tip-related issues, and provide experimental guidelines. We also survey the important applications of EC-TERS for probing molecular protonation, molecular adsorption, electrochemical reactions, and photoelectrochemical reactions. Finally, we discuss the opportunities and challenges in the future development of this young technique.
RESUMEN
Active oxygen species (AOS) play key roles in many important catalytic reactions relevant to clean energy and environment. However, it remains challenging to characterize the active sites for producing AOS and to image the surface properties of AOS, especially on multicomponent metallic catalyst surfaces. Herein, we utilize tip-enhanced Raman spectroscopy (TERS) to probe the local generation and diffusion of OH radicals on a Pd/Au(111) bimetallic catalyst surface. The reactive OH radicals can be catalytically generated from hydrogen peroxide (H2O2) at the metal surface, which then oxidizes the surface adsorbed thiolate, a reactant that is used as the TERS probe. By TERS imaging of the spatial distribution of unreacted thiolate molecules, we demonstrate that the Pd surface is active for generation of OH radicals and the Pd step edge shows much higher activity than the Pd terrace, whereas the Au surface is inactive. Furthermore, we find that the locally generated OH radicals at the Pd step edge could diffuse to both the Au and the Pd surface sites to induce oxidative reactions, with a diffusion length estimated to be about 5.4 nm. Our TERS imaging with few-nanometer spatial resolution not only unravels the active sites but also characterizes in real space the diffusion behavior of OH radicals. The results are highly valuable to understand AOS-triggered catalytic reactions. The strategy of using reactants with large Raman cross sections as TERS probes may broaden the application of TERS for studying catalysis with reactive small molecules.
RESUMEN
The over-use of antibiotics has caused a number of problems such as contamination of antibiotic residues and virus resistance, and therefore has attracted global attention. In this study, spectroscopic techniques and molecular docking were employed to predict conformational changes and binding interaction between two cephalosporins (cefaclor and cefixime) and calf thymus DNA (ctDNA). Fluorescence and UV-vis spectra suggested that static quenching was predominant and cephalosporin bound to the groove region of ctDNA. Binding parameters calculated by the Stern-Volmer and Scatchard equations showed that cephalosporin bound to ctDNA with a binding affinity in the order of 103 L mol-1 . Thermodynamic parameters further indicated that the reaction was a spontaneous process driven by enthalpy and entropy, and that the main binding force was an electrostatic force. The effects of iodide, denaturant, thermal denaturation and pH on a cephalosporin-Hoechst-DNA complex were also studied, and the results confirmed that cephalosporin bound to the groove area of DNA. Finally, these results were further confirmed by molecular docking and electrochemical studies.
Asunto(s)
Antibacterianos/química , Cefaclor/química , Cefixima/química , ADN/química , Técnicas Electroquímicas , Simulación del Acoplamiento Molecular , Animales , Sitios de Unión , Bovinos , Concentración de Iones de Hidrógeno , Conformación Molecular , Espectrometría de Fluorescencia , Espectrofotometría Ultravioleta , TermodinámicaRESUMEN
Electrochemical tip-enhanced Raman spectroscopy (EC-TERS) appears as a promising in situ nanospectroscopic tool for characterization and understanding of the electrochemical interfacial processes at the nanometer scale and molecular level. However, the wide application of EC-TERS is hampered by its low sensitivity as a result of the optical path distortion due to the refractive index mismatch of the multilayer media (air, glass, and electrolyte). Here, we propose a new side-illumination EC-TERS setup by coupling a water immersion objective with a high numerical aperture to a scanning tunneling microscope scanning head customized with a large open space and a compact spectroelectrochemical cell. It not only effectively eliminates the optical distortion but also increases the sensitivity remarkably, which allows sensitive monitoring of the electrochemical redox processes of anthraquinone molecules. More importantly, EC-TERS is able to independently control the tip position and laser illumination position. By utilizing this feature, we reveal that the irreversible reduction reaction of anthraquinone observed in EC-TERS is induced by the synergistic effect of the negative potential and laser illumination rather than the localized surface plasmon. The highly improved sensitivity and the flexibility to control the tip and laser illumination position on the nanometer scale endows EC-TERS as an important tool for the fundamental understanding of the photo- or plasmon electrochemistry and the interfacial structure-activity relationship of important electrochemical systems.
RESUMEN
Surface and interfaces play key roles in heterogeneous catalysis, electrochemistry and photo(electro)chemistry. Tip-enhanced Raman spectroscopy (TERS) combines plasmon-enhanced Raman spectroscopy with scanning probe microscopy to simultaneously provide a chemical fingerprint and morphological information for the sample at the nanometer spatial resolution. It is an ideal tool for achieving an in-depth understanding of the surface and interfacial processes, so that the relationship between structure and chemical performance can be established. We begin with the background of surfaces and interfaces and TERS, followed by a detailed discussion on some issues in experimental TERS, including tip preparation and TERS instrument configuration. We then focus on the progress of TERS for studying the surfaces and interfaces under different conditions, from ambient, to UHV, solid-liquid and electrochemical environments, followed by a brief introduction to the current understanding of the unprecedented high spatial resolution and surface selection rules. We conclude by discussing the future challenges for TERS practical applications in surfaces and interfaces.
RESUMEN
Tip-enhanced Raman spectroscopy can provide molecular fingerprint information with ultrahigh spatial resolution, but the tip will be easily contaminated, thus leading to artifacts. It also remains a great challenge to establish tip-enhanced fluorescence because of the quenching resulting from the proximity of the metal tip. Herein, we report shell-isolated tip-enhanced Raman and fluorescence spectroscopies by employing ultrathin shell-isolated tips fabricated by atomic layer deposition. Such shell-isolated tips not only show outstanding electromagnetic field enhancement in TERS but also exclude interference by contaminants, thus greatly promoting applications in solution. Tip-enhanced fluorescence has also been achieved using these shell-isolated tips, with enhancement factors of up to 1.7×103 , consistent with theoretical simulations. Furthermore, tip-enhanced Raman and fluorescence signals are acquired simultaneously, and their relative intensities can be manipulated by changing the shell thickness. This work opens a new avenue for ultrahigh resolution surface analysis using plasmon-enhanced spectroscopies.
RESUMEN
Electrochemical Raman spectroscopy is a powerful molecular level diagnostic technique for in situ investigation of adsorption and reactions on various material surfaces. However, there is still a big room to improve the optical path to meet the increasing request of higher detection sensitivity and spatial resolution. Herein, we proposed a novel electrochemical Raman setup based on a water immersion objective. It dramatically reduces mismatch of the refractive index in the light path. Consequently, significant improvement in detection sensitivity and spatial resolution has been achieved from both Zemax simulation and the experimental results. Furthermore, the thickness of electrolyte layer could be expanded to 2 mm without any influence on the signal collection. Such a thick electrolyte layer allows a much normal electrochemical response during the spectroelectrochemical investigations of the methanol oxidation.
RESUMEN
Silver is an ideal candidate for surface plasmon resonance (SPR)-based applications because of its great optical cross-section in the visible region. However, the uses of Ag in plasmon-enhanced spectroscopies have been limited due to their interference via direct contact with analytes, the poor chemical stability, and the Ag(+) release phenomenon. Herein, we report a facile chemical method to prepare shell-isolated Ag nanoparticle/tip. The as-prepared nanostructures exhibit an excellent chemical stability and plasmonic property in plasmon-enhanced spectroscopies for more than one year. It also features an alternative plasmon-mediated photocatalysis pathway by smartly blocking "hot" electrons. Astonishingly, the shell-isolated Ag nanoparticles (Ag SHINs), as "smart plasmonic dusts", reveal a â¼1000-fold ensemble enhancement of rhodamine isothiocyanate (RITC) on a quartz substrate in surface-enhanced fluorescence. The presented "smart" Ag nanostructures offer a unique way for the promotion of ultrahigh sensitivity and reliability in plasmon-enhanced spectroscopies.
RESUMEN
Interfacial properties are highly important to the performance of some energy-related systems. The in-depth understanding of the interface requires highly sensitive in situ techniques that can provide fingerprint molecular information at nanometer resolution. We developed an electrochemical tip-enhanced Raman spectroscopy (EC-TERS) by introduction of the light horizontally to the EC-STM cell to minimize the optical distortion and to keep the TERS measurement under a well-controlled condition. We obtained potential-dependent EC-TERS from the adsorbed aromatic molecule on a Au(111) surface and observed a substantial change in the molecule configuration with potential as a result of the protonation and deprotonation of the molecule. Such a change was not observable in EC-SERS (surface-enhanced), indicating EC-TERS can more faithfully reflect the fine interfacial structure than EC-SERS. This work will open a new era for using EC-TERS as an important nanospectroscopy tool for the molecular level and nanoscale analysis of some important electrochemical systems including solar cells, lithium ion batteries, fuel cells, and corrosion.
RESUMEN
After over 15 years of development, tip-enhanced Raman spectroscopy (TERS) is now facing a very important stage in its history. TERS offers high detection sensitivity down to single molecules and a high spatial resolution down to sub-nanometers, which make it an unprecedented nanoscale analytical technique offering molecular fingerprint information. The tip is the core element in TERS, as it is the only source through which to support the enhancement effect and provide the high spatial resolution. However, TERS suffers and will continue to suffer from the limited availability of TERS tips with a high enhancement, good stability, and high reproducibility. This review focuses on the tip-related issues in TERS. We first discuss the parameters that influence the enhancement and spatial resolution of TERS and the possibility to optimize the performance of a TERS system via an in-depth understanding of the enhancement mechanism. We then analyze the methods that have been developed for producing TERS tips, including vacuum-based deposition, electrochemical etching, electrodeposition, electroless deposition, and microfabrication, with discussion on the advantages and weaknesses of some important methods. We also tackle the issue of lifetime and protection protocols of TERS tips which are very important for the stability of a tip. Last, some fundamental problems and challenges are proposed, which should be addressed before this promising nanoscale characterization tool can exert its full potential. Graphical Abstract á .
Asunto(s)
Microscopía de Fuerza Atómica/instrumentación , Espectrometría Raman/instrumentación , Resonancia por Plasmón de Superficie/instrumentación , Animales , Diseño de Equipo , Humanos , Microtecnología , Nanopartículas/química , Nanotecnología/instrumentaciónRESUMEN
OBJECTIVE: To establish an HPLC method for determination of four flavonoids in rat plasma after oral Ecliptae Herba extract. METHODS: HPLC separation was carried out in a Neocleodur 100-5 C18 column (250 mm x 4.6 mm, 5 microm) with mobile phase A (consisting of methanol-0.2% phosphoric acid = 50:50) and mobile phase B (acetonitrile)with gradient elution at the flow rate of 1.0 mL/min. The detection wavelength was 350 nm and the column temperature was maintained at 40 degrees C. RESULTS: There were good linear relationships between concentration and peak area ratio of luteolin, apigenin, scutellarein and diosmetin in the ranges of 0.02-50 microg/mL with the recovery rates of 71.5%-90.2%. CONCLUSION: This method is rapid, accurate and reproducible for determination of luteolin, apigenin, scutellarein and diosmetin in rat plasma and study on pharmacokinetics of Ecliptae Herba extract.
Asunto(s)
Eclipta , Animales , Cromatografía Líquida de Alta Presión , Medicamentos Herbarios Chinos , Flavonoides , Extractos Vegetales , RatasRESUMEN
Polyurethane (PU) foams, pivotal in modern life, face challenges suh as fire hazards and environmental waste burdens. The current reliance of PU on potentially ecotoxic halogen-/phosphorus-based flame retardants impedes large-scale material recycling. Here, our demonstrated controllable catalytic cracking strategy, using cesium salts, enables self-evolving recycling of flame-retardant PU. The incorporation of cesium citrates facilitates efficient urethane bond cleavage at low temperatures (160 °C), promoting effective recycling, while encouraging pyrolytic rearrangement of isocyanates into char at high temperatures (300 °C) for enhanced PU fire safety. Even in the absence of halogen/phosphorus components, this foam exhibits a substantial increase in ignition time (+258.8%) and a significant reduction in total smoke release (-79%). This flame-retardant foam can be easily recycled into high-quality polyol under mild conditions, 60 °C lower than that for the pure foam. Notably, the trace amounts of cesium gathered in recycled polyols stimulate the regenerated PU to undergo self-evolution, improving both flame-retardancy and mechanical properties. Our controllable catalytic cracking strategy paves the way for the self-evolutionary recycling of high-performance firefighting materials.
RESUMEN
BACKGROUND: Chronic radiative chest wall ulcers are common in patients undergoing radiation therapy. If not treated early, then symptoms such as erosion, bleeding and infection will appear on the skin. In severe cases, ulcers invade the ribs and pleura, presenting a mortality risk. Small ulcers can be repaired with pedicle flaps. Because radioactive ulcers often invade the thorax, surgeons need to remove large areas of skin and muscle, and sometimes ribs. Repairing large chest wall defects are a challenge for surgeons. CASE SUMMARY: A 74-year-old female patient was admitted to our department with chest wall skin ulceration after radiation therapy for left breast cancer. The patient was diagnosed with chronic radioactive ulceration. After multidisciplinary discussion, the authors performed expansive resection of the chest wall ulcers and repaired large chest wall defects using a deep inferior epigastric perforator (DIEP) flap combined with a high-density polyethylene (HDPE) patch. The patient was followed-up 6 mo after the operation. No pigmentation or edema was found in the flap. CONCLUSION: DIEP flap plus HDPE patch is one of the better treatments for radiation-induced chest wall ulcers.
RESUMEN
The leakage and fire hazard of organic solid-liquid phase change material (PCM) tremendously limit its long-term and safe application in thermal energy storage and regulation. In this work, novel nanoflake-fabricated organic-inorganic supramolecular hierarchical microspheres denoted as BPL were synthesized through the electrostatically driven assembly of poly(ethylene ammonium phenylphosphamide) (BP) decorated layered double hydroxides using sodium dodecyl sulfate as a template. Then the BPL was simultaneously utilized as a porous supporting material and flame retardant for polyethylene glycol to fabricate shape-stabilized PCM (BS-PCM). Benefiting from the structural uniqueness of the BPL microsphere, the BS-PCM possessed a high latent heat capacity of 116.7 J g-1 and excellent thermoregulatory capability. Moreover, the BS-PCM had no apparent leakage after a 200-cycle heating/cooling process and showed excellent thermal reversibility, superior to similar solid-liquid PCMs reported in recent literature. More interestingly, unlike flammable PEG, BS-PCM showed excellent fire resistance when exposed to a fire source. The unique BPL porous microsphere provided not only a microcontainer with high storage capacity for solid-liquid PCM, but also a fire resistant barrier to PEG, supplying a promising solution for highly efficient and fire-safe thermal energy storage.
RESUMEN
Surface plasmons (SPs) of metals enable the tight focusing and strong absorption of light to realize an efficient utilization of photons at nanoscale. In particular, the SP-generated hot carriers have emerged as a promising way to efficiently drive photochemical and photoelectric processes under moderate conditions. In situ measuring of the transport process and spatial distribution of hot carriers in real space is crucial to efficiently capture the hot carriers. Here, we use electrochemical tip-enhanced Raman spectroscopy (EC-TERS) to in situ monitor an SP-driven decarboxylation and resolve the spatial distribution of hot carriers with a nanometer spatial resolution. The transport distance of about 20 nm for the reactive hot carriers is obtained from the TERS imaging result. The hot carriers with a higher energy have a shorter transport distance. These conclusions can be guides for the design and arrangement of reactants and devices to efficiently make use of plasmonic hot carriers.
RESUMEN
In the field of surface plasmon-mediated photocatalysis, the coupling reactions of p-aminothiophenol (PATP) and p-nitrothiophenol (PNTP) to produce p, p'-dimercaptoazobenzene (DMAB) are the most widely investigated systems. However, a clear understanding of the structure-function relationship is still required. Here, we used tip-enhanced Raman spectroscopy (TERS) to study the coupling reactions of PATP and PNTP on well-defined Ag(111) and Au(111) surfaces using 632.8 and 532 nm lasers. On Au(111), the oxidative coupling of PATP can proceed under irradiation by a 632.8 nm laser, and the reductive coupling of PNTP can only occur under irradiation by a 532 nm laser. Neither wavelength of laser light can induce the coupling reactions of these two molecules on Ag(111). Density functional theory (DFT) was used to calculate the stable adsorption configurations of PATP and PNTP on Ag(111) and Au(111). Both the adsorption configurations of the two molecules on the surfaces and laser energies were, experimentally and theoretically, found to determine whether the coupling reactions can occur on different substrates. These results may help the rational design of photocatalysts with enhanced reactivity.
RESUMEN
Defects can induce drastic changes of the electronic properties of two-dimensional transition metal dichalcogenides and influence their applications. It is still a great challenge to characterize small defects and correlate their structures with properties. Here, we show that tip-enhanced Raman spectroscopy (TERS) can obtain distinctly different Raman features of edge defects in atomically thin MoS2, which allows us to probe their unique electronic properties and identify defect types (e.g., armchair and zigzag edges) in ambient. We observed an edge-induced Raman peak (396 cm-1) activated by the double resonance Raman scattering (DRRS) process and revealed electron-phonon interaction in edges. We further visualize the edge-induced band bending region by using this DRRS peak and electronic transition region using the electron density-sensitive Raman peak at 406 cm-1. The power of TERS demonstrated in MoS2 can also be extended to other 2D materials, which may guide the defect engineering for desired properties.