Augmented reality display with high eyebox uniformity over the full field of view based on a random mask grating.

Ensuring uniform illuminance in waveguide-based augmented reality (AR) display devices is crucial for providing an immersive and comfortable visual experience. However, there is a lack of a straightforward and efficient design method available to achieve illuminance uniformity over the full field of view. To address this issue, we propose a novel design that utilizes random mask gratings (RMGs) as the folding grating and the out-coupling grating. Unlike traditional approaches that modify the grating structure, we control the diffraction efficiency distribution by adjusting the filling factor of the mask while keeping the grating structure unchanged in one RMG. The grating structures are designed and optimized based on rigorous coupled wave analysis and particle swarm optimization. The feasibility of our method is verified by the simulation results in Lighttools. In the FOV range of 20°×15°, the eyebox uniformities of all fields are greater than 0.78, which can provide a good visual experience for users.

Fan-in/fan-out for heterogeneous 19-core fibers based on metasurfaces with nonuniform phase plates.

In space-division-multiplexed transmission systems, it is essential to realize fan-in/fan-out devices that connect the cores between multicore fibers and single-mode fibers. In this Letter, we propose a metasurface-based fan-in/fan-out device with nonuniform phase plates for heterogeneous 19-core fibers across the full C band. Our results show that an average insertion loss of 0.85 dB and a maximum crosstalk of -25.5 dB can be achieved at 1550 nm. Across the C band, the insertion loss and crosstalk are better than 2.78 dB and -19.96 dB, respectively. The proposed concept can flexibly handle various fiber configurations without additional complexity.

Sodium alginate/sodium lignosulfonate hydrogel based on inert Ca2+ activation for water conservation and growth promotion.

Soil degradation has become a major global problem owing to the rapid development of agriculture. The problems of soil drought and decreased soil fertility caused by soil degradation severely affect the development of the agricultural and forestry industries. In this study, we designed sodium alginate (SA)/sodium lignosulfonate (SLS) hydrogel based on the activation and crosslinking of inert Ca2+. CaCO3 and SA were mixed, and then, inert Ca2+ was activated to prepare a gel with a stable structure and a uniform interior and exterior. The crosslinking activated by inert Ca2+ enhanced the stability of the hydrogel, and the optimal swelling rate of the hydrogel reached 28.91 g/g, thereby effectively improving the water-holding capacity of the soil (77.6-108.83 g/kg). SLS was degraded into humic acid (HA) and gradually released, demonstrating a positive growth-promoting effect in plant growth experiments. The SA/SLS hydrogel can be used for soil water retention and mitigation to significantly decrease the water loss rate of soil. This study will assist in addressing soil drought and fertility loss.

Bidirectional wide-angle waveguide grating antennas with flat-top far-field patterns for optical phased arrays.

To build advanced all solid-state LiDAR, optical phased arrays (OPAs) with a large field of view are highly desirable. As a critical building block, a wide-angle waveguide grating antenna is proposed here. Instead of aiming at the elimination of downward radiation of waveguide grating antennas (WGAs) to improve efficiencies, we in turn utilize the downward radiation and double the range of beam steering. In addition to widened field of views, the steered beams in two directions come from a common set of power splitters, phase shifters and antennas, which greatly reduces chip complexity and power consumption, especially for large-scale OPAs. Beam interference and power fluctuation in the far field due to downward emission can be decreased by specially designed SiO2/Si3N4 antireflection coating. The WGA exhibits balanced emissions in both the upward and downward directions, in which the field of view in each direction is more than 90°. The normalized intensity remains almost the same with a small variation of 10% from -39° to 39° for the upward emission and from -42° to 42° for the downward emission. This WGA is featured by a flat-top radiation pattern in far field, high emission efficiency and good tolerance to device fabrication errors. It holds good potential to achieve wide-angle optical phased arrays.

Hybrid waveguide based augmented reality display system with extra large field of view and 2D exit pupil expansion.

For a waveguide display device, the field of view (FOV) is a key parameter for evaluating its optical performance. To address this issue, we propose a hybrid waveguide system, which is composed of two projectors, two in-couplers, two half-mirror arrays and an out-coupler. We use two projectors to generate the left and right parts of the output image separately, which can increase the upper limit of the FOV significantly. Unlike conventional waveguide-based system, we use half-mirror arrays instead of folding gratings to realize 2D exit pupil expansion. By doing so, the total internal reflection condition can always be met during the pupil expansion process. To solve the difficulty in designing collimating optical system with large FOV, we propose a method of tilting the projection system. The hybrid waveguide system can realize a FOV of 88°(H) × 53°(V).

Composite film with adjustable number of layers for slow release of humic acid and soil remediation.

In this study, to improve the soil amendment performance of film materials, composite films with the adjustable number of layers and controlled slow-release time were prepared using sodium alginate (SA), chitosan (CS) and activated charcoal (AC) as raw materials. The prepared multilayer films exhibited a wide pH response range and excellent slow-release time. The cumulative release of humic acid (HA) increased from 19.87 ± 0.98% to 66.72 ± 1.06% with increasing the pH from 4.0 to 10.0 after 700 h of slow-release. In addition, after 50 d of remediation in red soil, plantation soil, and saline soil, the NH4+-N, Olsen-P, Olsen-K, and organic matter contents in the three soils were increased by 2.91-28.62 mg/kg, 46.97-70.43 mg/kg, 55.89-77.01 mg/kg, and 12.47-22.52 g/kg, respectively, and were able to provide sustained crop growth promotion effect. This study demonstrates the promising application of multilayer film in soil remediation and agricultural production.

Polarization-controlled efficient and unidirectional surface plasmon polariton excitation enabled by metagratings in a generalized Kretschmann configuration.

In this paper, we propose a generalized Kretschmann configuration that employs a metagrating to replace the prism, realizing polarization-controlled efficient and unidirectional surface plasmon polariton (SPP) excitation. This dielectric phase gradient metagrating on the top surface of a silica substrate is designed to deflect incident light, which subsequently launches SPP wave by means of momentum matching on the metal film coated on the bottom surface. A series of metagratings is designed to enable the SPP excitation by circularly or linearly polarized incident light. The flexibility and tunability of this design to efficiently control SPPs show potential to find wide applications in diverse integrated optics and SPP devices.

Broadband aberration-corrected snapshot spectrometer with a toroidal slicer mirror.

We demonstrate a broadband aberration-corrected snapshot spectrometer by developing a toroidal slicer mirror as the focusing mirror. A collimating slicer mirror and an integrated grating divide the entire wavelength range into several windows. The toroidal sub-mirrors of the focusing mirror compensate for the coma and correct the astigmatism at different windows to compress the spectral spots over the waveband. From 200 to 1000 nm, the RMS spot radii are less than 30 µm and the spectral resolution at 600 nm is 151.8 pm. The optics have a small volume of 11 cm×11 cm×1.5 cm by employing a folded structure.

Simultaneous Temperature and Strain Measurements Using Polarization-Maintaining Few-Mode Bragg Gratings.

Simultaneous measurement of temperature and strain was demonstrated using a polarization-maintaining few-mode Bragg grating (PM-FMF-FBG) based on the wavelength and phase modulation of the even L P 11 mode. The wavelength shift sensitivity and the interrogated phase sensitivity of the temperature and strain were measured to be 10 pm·°C-1 and 0.73 pm·µÎµ-1 and -3.2 × 10-2 rad·°C-1 and 4 × 10-4 rad·µÎµ-1, respectively, with a discrimination efficiency of 98%. The polarization interference led to selective polarization excitation of the reflection spectra, and the calculated phase sensitivity agreed with the experimental results.

Design of a high-performance in-coupling grating using differential evolution algorithm for waveguide display.

Illuminance nonuniformity caused by natural vignetting can seriously affect the display quality of large-field-of-view (FOV) waveguide displays. In this paper, an optimization method based on the differential evolution algorithm is proposed for in-coupling grating design to improve coupling efficiency and compensate for natural vignetting. The in-coupling grating parameters are optimized to achieve efficiency distributions in which efficiency increases continuously with incidence angle, realizing uniform illuminance over a large FOV of 45°. The angular uniformity reaches 0.89. Additionally, average diffraction efficiency reaches 89.13% for transverse-electric polarization at 532 nm and 76% in the wavelength region between 450 and 700 nm.

Compact high-resolution spectrometer using two plane gratings with triple dispersion.

We demonstrate a compact high-resolution spectrometer scheme using two plane gratings. In this approach, the rays are first diffracted by a fixed grating, then incident on a rotating grating at the Littrow diffraction angle, and are finally diffracted and reflected back to the fixed grating again. Thus, triple dispersion (TD) occurs during measurement, increasing the resolution. The formulae of this compact high-resolution spectrometer are rigorously derived. A design simulation with two gratings of 1050 lines/mm is performed and discussed. In addition, a prototype of this spectrometer has been built and tested. Its spectral resolution reaches a precision of 36 pm.

Compact broadband high-resolution infrared spectrometer with a dihedral reflector.

We demonstrate a compact broadband high-resolution spectrometer approach. A dihedral reflector is used to reflect the dispersed light back to the grating for a second diffraction, folding the light path in a compact space, and enhancing the spectral resolution. The theoretical formulas for the system are strictly derived. In addition, a prototype of this spectrometer for fiber communication in the infrared wavelength range has been built. The optics can fit inside a volume of 12 cm × 14 cm × 5 cm and its spectral resolution is 57 pm over a wide wavelength range from 1250 nm to 1650 nm.

Design of a uniform-illumination binocular waveguide display with diffraction gratings and freeform optics.

Uniform illuminance over the expanded exit pupil is an important requirement for waveguide display systems with a wide field of view (FOV). To address this issue, we develop a monochromatic binocular waveguide display in this paper. Two surface-relief diffraction gratings are designed as in-couplers and out-couplers. The parameters of the gratings are optimized to achieve uniform diffraction efficiency distributions over a broad angular range. The grating couplers enable the system to realize a diagonal FOV of 40°. A freeform surface prism is designed as the projection optics. The diameters of the two exit pupils are 12 mm in the expanding direction at an eye relief of 19 mm.

[Detection System for High-Resolution and Broadband-2D Spectrogram].

In order to meet the demand of detecting the high-resolution and broadband-2D spectrogram for echelle-prism cross-dispersion, the design method is given, and the 2D spectrogram detection system with high-resolution and low noise is designed by analyzing the relation between the detector and the optical system and proving designing method of detecting the area spectrogram. The system includes a main control unit, a detector driving unit, a signal processing unit, a data storage unit and a data transmission unit, etc. With Hamamatsu's S10141-1109S CCD as the detector, the detection system features high sensitivity, broadband spectrogram, high signal to noise ratio. Combined with the echelle-prism cross-dispersion optical path to perform experiments, the results show that, the detection system can acquire high-resolution 2D spectrogram image in the range of 200 to 600 nm, the monochromatic image at 253.652 nm of Hg lamp covers 5 pixels, and the resolvable wavelength reaches 6.3 pm.

Sodium lignosulfonate/graphene composites for efficient desalination by incorporating CoS to control pore size.

The phenomenon of overlapping double layers due to micropores inhibits capacitive deionization performance, which is improved by increasing the pore size. In this study, a novel ternary composite electrode (sodium lignosulfonate/reduced graphene oxide/cobalt sulfide, LGC) was designed using a two-step hydrothermal method. CoS with high pseudocapacitance modifies sodium lignosulfonate and graphene connected by hydrogen bonding, benefiting from the constitutive steric structure. The electrochemical performance was significantly enhanced, and the desalination capacity substantially improved. The LGC electrode specific capacitance was as high as 354.47 F g-1 at a 1 A g-1 current density. The desalination capacity of the capacitive deionization device comprising LGC and activated carbon in 1 M NaCl electrolyte reached 28.04 mg g-1 at an operating condition of 1.2 V, 7 mL min-1. Additionally, the LGC electrodes degraded naturally post the experiment by simply removing the CoS, suggesting that the LGC composites are promising material for capacitive deionization electrodes.

RGO-Induced Flower-like Ni-MOF In Situ Self-Assembled Electrodes for High-Performance Hybrid Supercapacitors.

Currently, the primary bottlenecks that hinder the widespread application of supercapacitors are low energy density and narrow potential windows. Herein, the hybrid supercapacitor with high energy density and wide potential window is constructed via an in situ self-assembly method employing RGO-induced flower-like MOF(Ni). Benefiting from the synergistic effect between RGO and MOF(Ni), the interfacial interactions are effectively improved, and the contact area with the electrolyte is enhanced, which increases the ion transfer kinetics and overall electrochemical performance. The MOF(Ni)@RGO electrode exhibits a specific capacitance of 1267.73 F g-1 at a current density of 1 A g-1. Crucially, the assembled MOF(Ni)@RGO//BC with a broad potential window and good stability employing a MOF(Ni)@RGO anode and biomass carbon cathode, combined with a 2 M PVA-KOH gel-electrolyte, achieves a maximum energy density of 70.16 Wh kg-1 at a power density of 2200.09 W kg-1, outperforming most reported supercapacitors. This hybrid supercapacitor exhibits excellent stability and high energy density, providing a novel strategy for further large-scale applications.

Custom-designed polyphenol lignin for the enhancement of poly(vinyl alcohol)-based wood adhesive.

Adhesives are used extensively in the wood industry. As resource and environmental issues become increasingly severe, the development of green and sustainable biomass-based adhesives has attracted increasing attention. In this work, a green wood adhesive is developed from poly(vinyl alcohol) and lignin with molecular designs of lignin extending beyond those in nature. The lignin undergoes extraction from corncob residue, aldehydration, and phenolisation (phenol, resorcinol, and catechol) to significantly increase the phenolic hydroxyl groups (over 7.92 mmol/g), which has the effect of enhancing the hydrogen bonding force between the adhesive and the wood, thereby greatly improving adhesive performance. Compared with pure PVA, polyphenol lignin-containing PVA showed improved adhesion strength and hydrophobicity. PVA/resorcinol-lignin has the significantly improved wood lap shear strength (6.27 MPa, 77.6 % improvement) and hydrophobicity (almost 100 % increase in wet shear strength). This research not only provides a green and high-performance alternative raw material for wood adhesives but also broadens the path for large-scale application of biomass.

[Optical path difference in off-plane quasi-Littrow dispersion mountings].

The present paper analyzes the relative relation between the meridian and sagittal rays in off-plane quasi-Littrow (OP-QL) dispersion mountings. It's concluded that the off-plane angle will cause the rotation of the beam and result in the mismatch between the sagittal beams on different optical elements. Therefore the total optical path difference (OPD) should be an accumulation of corresponding beams instead of the sagittal beam of each element itself. Then, a directional derivative based method is put forward to calculate the OPD for spherical mirrors in various directions. Based on the method, the numerical OPD for OP-QL mountings is solved. Finally, this methodology is validated with both echelette and echelle examples.

Rapid fabrication of tough sodium alginate/MXene/poly(vinyl alcohol) dual-network hydrogel electrolytes for flexible all-solid-state supercapacitors.

With the rapid development of flexible portable devices, polymer-based hydrogel electrolytes have drawn tremendous attention and widespread interest to replace conventional liquid electrolytes. Herein, an eco-friendly, low cost and fast method was adopted to synthesize novel cross-linked dual-network hydrogel electrolytes (PVA/SA/MXene-NaCl) within 5 min due to the formation of borate bonds. The unique dual-network structure of hydrogel enabled hydrogel electrolytes to efficiently dissipate energy under deformation and the formation of borate bonds endowed hydrogel with self-healing ability. Benefited from the introduction of NaCl and MXene, the hydrogels displayed a high ionic conductivity (40.8 mS/cm) and enhanced mechanical strength (650 kPa). Notedly, the flexible supercapacitor with low concentration of NaCl (0.3 mol L-1) delivered a superior areal capacitance of 130.8 mF cm-2 at 1 mA cm-2 and 106.2 mF cm-2 at 3 mA cm-2, and simultaneously offered remarkable capacitance retention under the state of bending, self-healing (five cycles), compression and stretching. Moreover, as-assembled supercapacitor maintained about 88.9 % of its original capacitance and 90.5 % of Coulombic efficiency after 5000 charge-discharge cycles. Our research presented a simple and universally pathway to prepare flexible energy storage devices with excellent mechanical and electrochemical properties.

Sodium alginate-based gel electrodes without binder for high-performance supercapacitors.

Binder use results in an expansion of the dead volume of the active material and a decline in the active sites, which will lead to a decrease in the electrochemical activity of the electrode. Therefore, the construction of electrode materials without the binder has been the research focus. Here, a novel ternary composite gel electrode without the binder (reduced graphene oxide/sodium alginate/copper cobalt sulfide, rGSC) were designed using a convenient hydrothermal method. Benefiting from the dual-network structure of rGS via the hydrogen bonding between rGO and sodium alginate not only better encapsulates CuCo2S4 with high pseudo-capacitance, but also simplifies the electron transfer path, and reduces the electron transfer resistance, which leads to a remarkable enhanced electrochemical performance. The rGSC electrode exhibits a specific capacitance of up to 1600.25 F g-1 when the scan rate is 10 mV s-1. The asymmetric supercapacitor was constructed with rGSC and activated carbon as the positive and negative electrode in a 6 M KOH electrolyte. It has a large specific capacitance and high energy/power density (10.7 Wh kg-1/1329.1 W kg-1). This work proposes a promising strategy for designing gel electrodes for higher energy density and larger capacitance without the binder.