RESUMEN
C5a peptidase, also known as ScpA, is a surface associated serine protease derived from Streptococcus pyogenes and has been described as an important factor in streptococcus virulence, capable of cleaving complement components C5a, C3 and C3a. Although the interactions of ScpA with complement components is well studied, extensive screening of ScpA activity against other pro-inflammatory cytokines is lacking. Here, ScpA's ability to cleave human pro-inflammatory cytokines was tested, revealing its ability to cleave human IFNγ, IFNλ1, IFNλ2, C5, IL-37 but with significantly reduced activities. The functional consequence of ScpA's cleavage of IFNγ in its signalling through the Jak-Stat pathway has also been evaluated in an in vitro RPE1 cell model. These newly identified targets for ScpA highlight the complexity of streptococcus infections and indeed, the potential for ScpA to have a therapeutic role in the progression of inflammatory diseases involving these cytokines.
Asunto(s)
Interferón gamma , Interferones , Humanos , Interferones/metabolismo , Interferón gamma/metabolismo , Transducción de Señal , Streptococcus pyogenes/enzimología , Citocinas/metabolismo , Línea Celular , Interferón lambda , Proteínas Bacterianas/metabolismoRESUMEN
The early stages of the molecular self-assembly pathway leading to crystal nucleation have a significant influence on the properties and purity of organic materials. This mini review collates the work on organic mesoscale clusters and discusses their importance in nucleation processes, with a particular focus on their critical properties and susceptibility to sample treatment parameters. This is accomplished by a review of detection methods, including dynamic light scattering, nanoparticle tracking analysis, small angle X-ray scattering, and transmission electron microscopy. Considering the challenges associated with crystallisation of flexible and large-molecule active pharmaceutical ingredients, the dynamic nature of mesoscale clusters has the potential to expand the discovery of novel crystal forms. By collating literature on mesoscale clusters for organic molecules, a more comprehensive understanding of their role in nucleation will evolve and can guide further research efforts.
RESUMEN
Posttranslational modifications of proteins can impact their therapeutic efficacy, stability, and potential for pharmaceutical development. The Group AStreptococcus pyogenesC5a peptidase (ScpA) is a multi-domain protein composed of an N-terminal signal peptide, a catalytic domain (including propeptide), three fibronectin domains, and cell membrane-associated domains. It is one of several proteins produced by Group AS. pyogenesknown to cleave components of the human complement system. After signal peptide removal, ScpA undergoes autoproteolysis and cleaves its propeptide for full maturation. The exact location and mechanism of the propeptide cleavage, and the impact of this cleavage on stability and activity, are not clearly understood, and the exact primary sequence of the final enzyme is not known. A form of ScpA with no autoproteolysis fragments of propeptide present may be more desirable for pharmaceutical development from a regulatory and a biocompatibility in the body perspective. The current study describes an in-depth structural and functional characterization of propeptide truncated variants of ScpA expressed inEscherichia colicells. All three purified ScpA variants, ScpA, 79ΔPro, and 92ΔPro, starting with N32, D79, and A92 positions, respectively, showed similar activity against C5a, which suggests a propeptide-independent activity profile of ScpA. CE-SDS and MALDI top-down sequencing analyses highlight a time-dependent propeptide autoproteolysis of ScpA at 37 °C with a distinct end point at A92 and/or D93. In comparison, all three variants of ScpA exhibit similar stability, melting temperatures, and secondary structure orientation. In summary, this work not only highlights propeptide localization but also provides a strategy to recombinantly produce a final mature and active form of ScpA without any propeptide-related fragments.
Asunto(s)
Productos Biológicos , Streptococcus pyogenes , Humanos , Streptococcus pyogenes/metabolismo , Endopeptidasas/metabolismo , Señales de Clasificación de ProteínaRESUMEN
PURPOSE: To investigate the difference in methods to determine the osmolality in solutions of stabilizers used for long-acting injectable suspensions. METHODS: The osmolality was measured by freezing point depression and vapor pressure for 11 different polymers and surfactants (PEG 3350, 4000, 6000, 8000, 20,000, PVP K12, K17 and K30, poloxamer 188, 388 and 407, HPMC E5, Na-CMC, polysorbate 20 and 80, vitamin E-TPGS, phospholipid, DOSS and SDS) in different concentrations. RESULTS: Independently of the measuring method, an increase in osmolality with increasing concentration was observed for all polymers and surfactants, as would be expected due to the physicochemical origin of the osmolality. No correlation was found between the molecular weight of the polymers and the measured osmolality. The osmolality values were different for PVPs, PEGs, and Na-CMC using the two different measurement methods. The values obtained by the freezing point depression method tended to be similar or higher than the ones provided by vapor pressure, overall showing a significant difference in the osmolality measured by the two investigated methods. CONCLUSIONS: For lower osmolality values (e.g. surfactants), the choice of the measuring method was not critical, both the freezing point depression and vapor pressure could be used. However, when the formulations contained higher concentrations of excipients and/or thermosensitive excipients, the data suggests that the vapor pressure method would be more suited.
Asunto(s)
Depresión , Excipientes , Presión de Vapor , Congelación , Concentración Osmolar , Polímeros , TensoactivosRESUMEN
Antihistamines are capable of blocking mediator responses in allergic reactions including allergic rhinitis and dermatological reactions. By incorporating various H1 receptor antagonists into a lipid cubic phase network, these active ingredients can be delivered locally over an extended period of time owing to the mucoadhesive nature of the system. Local delivery can avoid inducing unwanted side effects, often observed after systematic delivery. Lipid-based antihistamine delivery systems are shown here to exhibit prolonged release capabilities. In vitro drug dissolution studies investigated the extent and release rate of two model first-generation and two model second-generation H1 antagonist antihistamine drugs from two monoacyglycerol-derived lipid models. To optimize the formulation approach, the systems were characterized macroscopically and microscopically by small-angle X-ray scattering and polarized light to ascertain the mesophase accessed upon an incorporation of antihistamines of varying solubilities and size. The impact of encapsulating the antihistamine molecules on the degree of mucoadhesivity of the lipid cubic systems was investigated using multiparametric surface plasmon resonance. With the ultimate goal of developing therapies for the treatment of allergic reactions, the ability of the formulations to inhibit mediator release utilizing RBL-2H3 mast cells with the propensity to release histamine upon induction was explored, demonstrating no interference from the lipid excipient on the effectiveness of the antihistamine molecules.
Asunto(s)
Sistemas de Liberación de Medicamentos/métodos , Antagonistas de los Receptores Histamínicos/administración & dosificación , Membrana Dobles de Lípidos/administración & dosificación , Humanos , Mucosa Nasal/metabolismoRESUMEN
A deep understanding of the molecular interactions of carbon nanodots with biomacromolecules is essential for wider applications of carbon nanodots both in vitro and in vivo. Herein, nitrogen and sulfur co-doped carbon dots (N,S-CDs) with a quantum yield of 16% were synthesized by a 1-step hydrothermal method. The N,S-CDs exhibited a good dispersion, with a graphite-like structure, along with the fluorescence lifetime of approximately 7.50 ns. Findings showed that the fluorescence of the N,S-CDs was effectively quenched by bovine hemoglobin as a result of the static fluorescence quenching. The mentioned quenching mechanism was investigated by the Stern-Volmer equation, temperature-dependent quenching, and fluorescence lifetime measurements. The binding constants, number of binding sites, and the binding average distance between the energy donor N,S-CDs and acceptor bovine hemoglobin were calculated as well. These findings will provide for valuable insights on the future bioapplications of N,S-CDs.
Asunto(s)
Carbono/química , Hemoglobinas/química , Hemoglobinas/metabolismo , Nitrógeno/química , Azufre/química , Animales , Bovinos , Puntos CuánticosRESUMEN
According to the World Health Organization, antimicrobial resistance is one of the top ten issues that pose a major threat to humanity. The lack of investment by the pharmaceutical industry has meant fewer novel antimicrobial agents are in development, exacerbating the problem. Emerging drug design strategies are exploring the repurposing of existing drugs and the utilization of novel drug candidates, like antimicrobial peptides, to combat drug resistance. This proactive approach is crucial in fighting global health threats. In this study, an additive combination of a repurposed anti-leprosy drug, clofazimine, and an antimicrobial peptide, nisin A, are preformulated using liquid antisolvent precipitation to generate a stable amorphous, ionized nanoparticle system to boost antimicrobial activity. The nanotechnology aims to improve the physicochemical properties of the inherently poorly water-soluble clofazimine molecules while also harnessing the previously unreported additive effect of clofazimine and nisin A. The approach transformed clofazimine into a more water-soluble salt, yielding amorphous nanoparticles stabilized by the antimicrobial peptide; and combined the two drugs into a more soluble and more active formulation. Blending pre-formulation strategies like amorphization, salt formation, and nanosizing to improve the inherent low aqueous solubility of drugs can open many new possibilities for the design of new antimicrobial agents. This fusion of pre-formulation technologies in combination with the multi-hurdle approach of selecting drugs with different effects on microbes could be key in the design platform of new antibiotics in the fight against antimicrobial resistance.
Asunto(s)
Antiinfecciosos , Clofazimina , Nisina , Clofazimina/química , Péptidos Antimicrobianos , AguaRESUMEN
Thuricin CD is a two-peptide antimicrobial produced by Bacillus thuringiensis. Unlike previous antibiotics, it has shown narrow spectrum activity against Clostridioides difficile, a bacterium capable of causing infectious disease in the colon. However, peptide antibiotics have stability, solubility, and permeability problems that can affect their performance in vivo. This work focuses on the bioactivity and bioavailability of thuricin CD with a view to developing a formulation for delivery of active thuricin CD peptides through the gastrointestinal tract (GIT) for local delivery in the colon. The results indicate that thuricin CD is active at low concentrations only when both peptides are present. While thuricin CD was degraded by proteases and was unstable and poorly soluble in gastric fluid, it showed increased solubility in intestinal fluid, probably due to micelle encapsulation. Based on this, thuricin CD was encapsulated in anionic liposomes, which showed increased activity compared to the free peptide, maintained activity after exposure to pepsin in gastric fluid and intestinal fluid, was stable in suspension for over 21 days at room temperature and for 60 days at 4 °C, and exhibited no toxicity to epithelial intestinal cells. These findings suggest that an anionic lipid-based nano formulation may be a promising approach for local oral delivery of thuricin CD.
Asunto(s)
Bacteriocinas , Liposomas , Péptidos Antimicrobianos , Antibacterianos/farmacologíaRESUMEN
HYPOTHESIS: The stabilization and isolation to dryness of drug nanoparticles has always been a challenge for nano-medicine production. In the past, the use of montmorillonite (MMT) clay carrier particles to adsorb drug nanoparticles and maintain their high surface area to volume ratio after isolation to dryness has proven to be effective. We hypothesise that the distribution of hydrophilic and hydrophobic patches on the clay's surface as well as its porosity/roughness, hinder the agglomeration of the drug nanoparticles to the extent that they retain their high surface area to volume ratio and display fast dissolution profiles. EXPERIMENTS: In this work, the distribution of hydrophobicity and hydrophilicity, and the porosity/roughness, of the surface of selected silica carrier particles were varied and the impact of these variations on drug nanoparticle attachment to the carrier particle and subsequent dissolution profiles was studied. FINDINGS: The fastest dissolution profiles at the highest drug nanoparticle loadings were obtained with a periodic mesoporous organosilane carrier particle which had a homogeneous distribution of hydrophobic and hydrophilic surface properties. Carrier particles with rough/porous surfaces and a combination of hydrophobic and hydrophilic patches resulted in nanocomposite powders with faster dissolution behaviour than carrier particles with predominantly either a hydrophobic or hydrophilic surface, or with non-porous/smoother surfaces.
Asunto(s)
Portadores de Fármacos , Nanopartículas , Portadores de Fármacos/química , Arcilla , Solubilidad , Nanopartículas/química , Dióxido de Silicio/química , Propiedades de Superficie , Tamaño de la PartículaRESUMEN
The impact of single or combinations of additives on the generation of nanosuspensions of two poorly water-soluble active pharmaceutical ingredients (APIs), fenofibrate (FF) and dalcetrapib (DCP), and their isolation to the dry state via antisolvent (AS) crystallization followed by freeze-drying was explored in this work. Combinations of polymeric and surfactant additives such as poly(vinyl alcohol) or hydroxypropyl methyl cellulose and sodium docusate were required to stabilize nanoparticles (â¼200-300 nm) of both APIs in suspension before isolation to dryness. For both FF and DCP, multiple additives generated the narrowest, most-stable particle size distribution, with the smallest particles in suspension, compared with using a single additive. An industrially recognized freeze-drying process was used for the isolation of these nanoparticles to dryness. When processed by the liquid AS crystallization followed by freeze-drying in the presence of multiple additives, a purer monomorphic powder for FF resulted than when processed in the absence of any additive or in the presence of a single additive. It was noted that all nanoparticles freeze-dried in the presence of additives had a flat, flaky habit resulting in large surface areas. Agglomeration occurred during freeze-drying, resulting in micron-size particles. However, after freeze-drying, powders produced with single or multiple additives showed similar dissolution profiles, irrespective of aging time before drying, thus attenuating the advantage of multiple additives in terms of size observed before the freeze-drying process.
RESUMEN
In the design of injectable antimicrobial dextran-alginate hydrogels, the impact of dextran oxidation and its subsequent changes in molecular weight and the incorporation of glycol chitosan on (i) gel mechanical strength and (ii) the inhibitory profile of an encapsulated bacteriocin, nisin A, are explored. As the degree of oxidation increases, the weight average molecular mass of the dextran decreases, resulting in a reduction in elastic modulus of the gels made. Upon encapsulation of the bacteriocin nisin into the gels, varying the dextran mass/oxidation level allowed the antimicrobial activity against S. aureus to be controlled. Gels made with a higher molecular weight (less oxidised) dextran show a higher initial degree of inhibition while those made with a lower molecular weight (more oxidised) dextran exhibit a more sustained inhibition. Incorporating glycol chitosan into gels composed of dextran with higher masses significantly increased their storage modulus and the gels' initial degree of inhibition.
Asunto(s)
Antiinfecciosos , Bacteriocinas , Hidrogeles , Dextranos , Staphylococcus aureusRESUMEN
Monoclonal antibodies provide highly specific and effective therapies for the treatment of chronic diseases. These protein-based therapeutics, or drug substances, are transported in single used plastic packaging to fill finish sites. According to good manufacturing practice guidelines, each drug substance needs to be identified before manufacturing of the drug product. However, considering their complex structure, it is challenging to correctly identify therapeutic proteins in an efficient manner. Common analytical techniques for therapeutic protein identification are SDS-gel electrophoresis, enzyme linked immunosorbent assays, high performance liquid chromatography and mass spectrometry-based assays. Although effective in correctly identifying the protein therapeutic, most of these techniques need extensive sample preparation and removal of samples from their containers. This step not only risks contamination but the sample taken for the identification is destroyed and cannot be re-used. Moreover, these techniques are often time consuming, sometimes taking several days to process. Here, we address these challenges by developing a rapid and non-destructive identification technique for monoclonal antibody-based drug substances. Raman spectroscopy in combination with chemometrics were used to identify three monoclonal antibody drug substances. This study explored the impact of laser exposure, time out of refrigerator and multiple freeze thaw cycles on the stability of monoclonal antibodies. and demonstrated the potential of using Raman spectroscopy for the identification of protein-based drug substances in the biopharmaceutical industry.
Asunto(s)
Anticuerpos Monoclonales , Espectrometría Raman , Espectrometría Raman/métodos , Anticuerpos Monoclonales/análisis , Espectrometría de Masas , Cromatografía Líquida de Alta PresiónRESUMEN
This work presents two new solid forms, a polymorph and a solvate, of the antifungal active pharmaceutical ingredient griseofulvin (GSF). The novel forms were characterized by powder X-ray diffraction, differential scanning calorimetry, and thermogravimetric analysis, and their crystal structures were determined by single-crystal X-ray diffraction. The new polymorphic form (GSF Form VI) was obtained upon drying at room temperature the GSF-acetonitrile solvate. GSF Form VI is a relict structure related to reported solvates of GSF. Thermal stability studies show that Form VI is metastable and monotropically related to the stable GSF Form I. The new GSF-n-butyl acetate solvate was obtained by crystallization from an n-butyl acetate solution. The stoichiometry of the n-butyl acetate solvate is 1:0.5. The solvate loses the solvent from the crystal lattice at a temperature between 363.15 and 374.15 K.
RESUMEN
Chronic wounds affect millions of people globally. This number is set to rise with the increasing incidence of antimicrobial-resistant bacterial infections, such as methicillin-resistant Staphylococcus aureus (MRSA), which impair the healing of chronic wounds. Lacticin 3147 is a two-peptide chain bacteriocin produced by Lactococcus lactis that is active against S. aureus including MRSA strains. Previously, poor physicochemical properties of the peptides were overcome by the encapsulation of lacticin 3147 into solid lipid nanoparticles. Here, a lacticin 3147 solid lipid nanoparticle gel is proposed as a topical treatment for S. aureus and MRSA wound infections. Initially, lacticin 3147's antimicrobial activity against S. aureus was determined before encapsulation into solid lipid nanoparticles. An optimised gel formulation with the desired physicochemical properties for topical application was developed, and the lacticin-loaded solid lipid nanoparticles and free lacticin 3147 aqueous solution were incorporated into separate gels. The release of lacticin 3147 from both the solid lipid nanoparticle and free lacticin gels was measured where the solid lipid nanoparticle gel exhibited increased activity for a longer period (11 days) compared to the free lacticin gel (9 days). Both gels displayed potent activity ex vivo against S. aureus-infected pig skin with significant bacterial eradication (> 75%) after 1 h. Thus, a long-acting potent lacticin 3147 solid lipid nanoparticle gel with the required physicochemical properties for topical delivery of lacticin 3147 to the skin for the potential treatment of S. aureus-infected chronic wounds was developed.
Asunto(s)
Antiinfecciosos , Staphylococcus aureus Resistente a Meticilina , Infección de Heridas , Animales , Porcinos , Staphylococcus aureus , Hidrogeles , Péptidos , Infección de Heridas/tratamiento farmacológico , AntibacterianosRESUMEN
In order to develop bacteriocins, like the lantibiotic nisin A, into effective alternatives to existing antibiotics, their biophysical and physicochemical properties must first be assessed, from solubility, to susceptibility and absorption. It has been well established that formulation strategies at early drug development stages can be crucial for successful outcomes during preclinical and clinical phases of development, particularly for molecules with challenging physicochemical properties. This work elucidates the physicochemical challenges of nisin A in terms of its susceptibility to digestive enzymes like pepsin, pancreatin and proteinase K and its poor solubility at physiological pHs. Low solution concentrations, below the minimum inhibitory concentration against Staphylococcus aureus, were obtained in phosphate buffered saline (PBS, pH 7.4) and in fasted state simulated intestinal fluid (FaSSIF, pH 6.5), while higher solubilities at more acidic pH's such as in a KCl/HCl buffer (pH 2) and in fasted state simulated gastric fluid (FaSSGF, pH 1.6) are observed. Tween® 80 (0.01% v/v) significantly increased the solution concentration of nisin A in PBS (pH 7.4, 24 hr). Pancreatin doubled nisin A's solution concentration at pH 7.4 (PBS) but reduced its' inhibitory activity to â¼ 20%, and pepsin almost completely degraded nisin (after 24 hr), but retained activity at biologically relevant exposure times (â¼15 min). Harnessing synergism between nisin A and either glycol chitosan or ε-poly lysine, combined with the solubilizing effect of Tween®, increased the antimicrobial activity of nisin A six fold in an in vitro oral administration model.
Asunto(s)
Antibacterianos/farmacología , Biopolímeros , Nisina/farmacología , Staphylococcus aureus/efectos de los fármacos , Administración Oral , Antibacterianos/administración & dosificación , Antibacterianos/química , Sistemas de Liberación de Medicamentos , Sinergismo Farmacológico , Humanos , Pruebas de Sensibilidad Microbiana , Nisina/administración & dosificación , Nisina/químicaRESUMEN
Lipid cubic phase (LCP) formulations enhance the intestinal solubility and bioavailability of hydrophobic drugs by reducing precipitation and facilitating their mass transport to the intestinal surface for absorption. LCPs with an ester linkage connecting the acyl chain to the glycerol backbone (monoacylglycerols), are susceptible to chemical digestion by several lipolytic enzymes including lipases, accelerating the release of hydrophobic agents from the lipid bilayers of the matrix. Unlike regular enzymes that transform soluble substrates, lipolytic enzymes act at the interface of water and insoluble lipid. Therefore, compounds that bind to this interface can enhance or inhibit the activity of enzymes to varying extent. Here, we explore how the lipolysis rate can be tuned by the interfacial interaction of porcine pancreatic lipase with monoolein LCPs containing a known lipase inhibitor, tetrahydrolipstatin. Release of the Biopharmaceutical Classification System (BCS) class IV drug, paclitaxel, from the inhibitor-modified LCP was examined in the presence of lipase and its effectors colipase and calcium. By combining experimental dynamic digestion studies, thermodynamic measurements and molecular dynamics simulations of the competitive inhibition of lipase by tetrahydrolipstatin, we reveal the role and mode of action of lipase effectors in creating a precisely-balanced degradation-controlled LCP release system for the poorly soluble paclitaxel drug.
Asunto(s)
Lipasa , Paclitaxel , Animales , Interacciones Hidrofóbicas e Hidrofílicas , Lipasa/metabolismo , Lípidos , Lipólisis , Páncreas/metabolismo , PorcinosRESUMEN
Long-acting injectables are a unique drug formulation strategy, providing a slow and sustained release of active pharmaceutical ingredients (APIs). In this study, a novel approach that combines liquid antisolvent precipitation with seeding to obtain a stable form of the API indomethacin while achieving the desired particle size distribution is described. It was proven that when a metastable form of indomethacin was initially nucleated, the rate of its transformation to the stable form was influenced by the presence of excipients and seeds (17.10 ± 0.20 µm), decreasing from 48 to 4 h. The final particle size (D50) of the indomethacin suspension produced without seeding was 7.33 ± 0.38 µm, and with seeding, it was 5.61 ± 0.14 µm. Additionally, it was shown that the particle size distribution of the seeds and the time point of seed addition were critical to obtain the desired solid-state form and that excipients played a crucial role during nucleation and polymorphic transformation. This alternative, energy-efficient bottom-up method for the production of drug suspensions with a reduced risk of contamination from milling equipment and fewer processing steps may prove to be comparable in terms of stability and particle size distribution to current industrially accepted top-down approaches.
RESUMEN
Sevelamer hydrochloride (SH) or Renagel® is an effective phosphate binder prescribed to prevent the absorption of phosphate in end stage renal disease (ESRD) patients. The relationship between SH structure and binding capacity and affinity is very important and can be used in characterising the sensitivity of the hydrogel to binding conditions. Thus, a series of hydrogels were prepared by varying the amount of crosslinker, whilst the other hydrogel components were kept constant. Variation of this parameter influenced the hydrogel structure as shown by swelling data, differential scanning calorimetry and solid state nuclear magnetic resonance spectroscopy. The hydrogels' physical characteristics were found to correlate with the number of phosphate binding sites and affinity obtained from the Langmuir-Freundlich Isotherm (L-FI) and affinity distribution spectra (AD). The hydrogels formed using lower amounts of crosslinker showed a slight increase in binding capacity but with lower affinity. However, the influence of the pH of the binding media on the binding parameters of sevelamer hydrochloride was significant. This is the first report on the use of AD spectra generated from L-FI binding parameters in hydrogels, which demonstrates the sensitivity of the affinity and binding site numbers to changes in hydrogel physical properties and the pH of the binding media.
Asunto(s)
Hidrogeles , Poliaminas , Humanos , Fosfatos/metabolismo , Poliaminas/química , SevelamerRESUMEN
The bacteriocin lacticin 3147 (lacticin) has shown activity against clinically relevant and antimicrobial-resistant bacteria such as Listeria monocytogenes and Clostridioides difficile. It is composed of two peptides, Ltnα and Ltnß, which work together to form pores in the membrane of Gram-positive bacteria. Lacticin possesses poor aqueous solubility and is degraded by intestinal proteases. In a previous study, peptides encapsulated into solid lipid nanoparticles (SLNs) displayed activity in aqueous media and were protected from enzyme degradation but showed a low encapsulation efficiency (EE%) for Ltnα. In this study, however, lacticin was encapsulated into SLNs both individually (single occupancy, SLNα + SLNß) and together (double occupancy SLNαß) via a nanoprecipitation technique. This achieved SLNs of uniform size with an EE% above 87% for both peptides at loadings of 9 or 18 mg/g of lipid under single occupancy or double occupancy respectively. SLNαß dispersions displayed more potent activity at 3.13 and 1.56 µg/ml lacticin than SLNα + SLNß dispersions. Thus, the SLNαß dispersion was chosen for further analysis. SLNαß dispersions showed no cytotoxicity to endothelial cells. The SLN release media (fasted state simulated intestinal fluid; FaSSIF) retained activity at 1 h and 3 h indicating that lacticin may be sufficiently protected from proteases present in the duodenum. Finally, a reconstituted freeze-dried SLNαß dispersion was stable and achieved 99.99% bacterial killing at 3.125 µg/ml lacticin. Thus, an SLN based lacticin delivery system was developed, potentially enabling oral administration of the bacteriocin to the colon to treat local infections such as C. difficile.