Stepwise formation of iridium(III) complexes with monocyclometalating and dicyclometalating phosphorus chelates.

With the motivation of assembling cyclometalated complexes without nitrogen-containing heterocycle, we report here the design and systematic synthesis of a class of Ir(III) metal complexes functionalized with facially coordinated phosphite (or phosphonite) dicyclometalate tripod, together with a variety of phosphine, chelating diphosphine, or even monocyclometalate phosphite ancillaries. Thus, treatment of [IrCl(3)(tht)(3)] with stoichiometric amount of triphenylphosphite (or diphenyl phenylphosphonite), two equiv of PPh(3), and in presence of NaOAc as cyclometalation promoter, gives formation of respective tripodal dicyclometalating complexes [Ir(tpit)(PPh(3))(2)Cl] (2a), [Ir(dppit)(PPh(3))(2)Cl] (2b), and [Ir(dppit)(PMe(2)Ph)(2)Cl] (2c) in high yields, where tpitH(2) = triphenylphosphite and dppitH(2) = diphenyl phenylphosphonite. The reaction sequence that afforded these complexes is established. Of particular interest is isolation of an intermediate [Ir(tpitH)(PPh(3))(2)Cl(2)] (1a) with monocyclometalated phosphite, together with the formation of [Ir(tpit)(tpitH)(PPh(3))] (3a) with all tripodal, bidentate, and monodentate phosphorus donors coexisting on the coordination sphere, upon treatment of 2a with a second equiv of triphenylphosphite. Spectroscopic studies were performed to explore the photophysical properties. For all titled Ir(III) complexes, virtually no emission can be observed in either solution at room temperature or 77 K CH(2)Cl(2) matrix. Time-dependent DFT calculation indicates that the lowest energy triplet manifold involves substantial amount of metal centered (3)MC dd contribution. Due to its repulsive potential energy surface (PES) that touches the PES of ground state, the (3)MC dd state executes predominant nonradiative deactivation process.

Emissive iridium(III) diimine complexes formed by double cyclometalation of coordinated triphenylphosphite.

We report on the synthesis of a new series of iridium(III) complexes functionalized with various diimine chromophores, together with a facially coordinated dicyclometalated phosphite chelate and a monodentate anionic ancillary. This conceptual design presents a novel strategy in obtaining a new class of iridium(III) diimine complexes without employment of traditional nitrogen-containing polyaromatic cyclometalates. Additionally, we discuss the basic charactersistics of the ground and lower-lying excited states involved, as documented by crystal structural, photophysical studies, and density functional theory calculations. Fabrication of the green-emitting organic light-emitting diodes with one such dopant, [Ir(dbbpy)(tpit)NCS] (2b), where dbbpy and tpit represent di-tert-butyl-2,2'-bipyridine and dicyclometalated triphenylphosphite, respectively, was successfully made, attaining a peak external quantum efficiency (η(ext)), a luminance efficiency (η(l)), and a power efficiency (η(p)) of 14.1%, 46.6 cd A(-1), and 39.9 lm W(-1), respectively.

Diphenyl(1-naphthyl)phosphine ancillary for assembling of red and orange-emitting Ir(III) based phosphors; strategic synthesis, photophysics, and organic light-emitting diode fabrication.

Treatment of a series of dinuclear Ir(III) complexes [(fnazo)(2)Ir(µ-Cl](2), [(fpiq)(2)Ir(µ-Cl](2), and [(fppy)(2)Ir(µ-Cl](2) with diphenyl(1-naphthyl)phosphine (dpnH) in decalin at 100 °C afforded the simple adducts, trans-N,N'-[(fnazo)(2)Ir(dpnH)Cl] (1a), trans-N,N'-[(fpiq)(2)Ir(dpnH)Cl] (1b), and trans-N,N'-[(fppy)(2)Ir(dpnH)Cl] (1c), for which the C(∧)N cyclometalating reagents, that is, fnazoH, fpiqH and fppyH, stands for 4-(4-fluorophenyl)quinazoline, 1-(4-fluorophenyl)isoquinoline and 4-fluorophenylpyridine, respectively. Single crystal X-ray diffraction study on 1a revealed existence of two trans-N,N' cyclometalates, with both chloride and dpnH donors located at the positions opposite to the phenyl substituents. Subsequent heating of 1a-1c at higher temperature afforded the second isomer (2a-2c), showing formation of cis-N,N' orientation for the aforementioned cyclometalates. Further thermolysis of either trans or cis-Ir(III) complexes 1 or 2 in presence of sodium acetate, which serves as both activator and chloride scavenger, gave successful isolation of a mixture of two fully cyclometalated Ir(III) complexes trans-N,N'-[(C(∧)N)(2)Ir(dpn)] (3a-3c) and cis-N,N'-[(C(∧)N)(2)Ir(dpn)] (4a-4c). Structural and photophysical properties of complexes 3a-3c and 4a-4c were measured and compared. Time-dependent density functional theory (DFT) studies suggested that, upon changing the C(∧)N cyclometalates from quinazolinyl, isoquinolinyl, and, finally, to pyridyl fragment, the lowest unoccupied molecular orbitals (LUMOs) are gradually shifted from the cyclometalating nitrogen heterocycles to the 1-naphthyl group of the phosphine chelate and, concomitantly altered the photophysical properties. An organic light-emitting diode (OLED) using orange-red phosphors 4a and 4b has been successfully fabricated. At the practical brightness of 500 cd·m(-2), decent external quantum efficiency of 10.6% and 12.5% could be reached for 4a and 4b, respectively, revealing the usefulness of relevant molecular architecture in designing triplet OLED emitters.

Photophysics of heteroleptic iridium(III) complexes of current interest; a closer look on relaxation dynamics.

The excited-state dynamics of heteroleptic iridium(III) complexes have been investigated using femto-nanosecond time-resolved luminescence and transient absorption spectroscopy. Two prototypical examples illustrated here are iridium(III) bis[2-(2,4-difluorophenyl)pyridinato-N,C(2')] quinaldinate (1) and iridium(III) bis[2-(2,4-difluorophenyl)pyridinato-N,C(2')][2-(6-methylbenzoxazol-2-yl)phenolate] (2). Upon photoexcitation at, for example, 400 nm, the emission decay, monitored at the region of phosphorescence, for both 1 and 2 consists of a system response limited rise (<300 ps) and a single exponential decay. Further single wavelength as well as full spectrum of femto-picosecond transient absorption acquired in CH(2)Cl(2) at room temperature reveals an ultrafast S(1) --> T(n) intersystem crossing (<1 ps) and a rapid T(n) --> T(1) internal conversion/vibrational relaxation within a time period of <10 ps. The results lead us to conclude that following Franck-Condon excitation, the time scale required to populate the lowest triplet state should be <10 ps.

Authentic-blue phosphorescent iridium(III) complexes bearing both hydride and benzyl diphenylphosphine; control of the emission efficiency by ligand coordination geometry.

Sequential treatment of IrCl(3) x nH(2)O with 2 equiv of benzyl diphenylphosphine (bdpH) and then 1 equiv of 3-trifluoromethyl-5-(2-pyridyl) pyrazole (fppzH) in 2-methoxyethanol gave formation to three isomeric complexes with formula [Ir(bdp)(fppz)(bdpH)H] (1-3). Their molecular structures were established by single crystal X-ray diffraction studies, showing existence of one monodentate phosphine bdpH, one terminal hydride, a cyclometalated bdp chelate, and a fppz chelate. Variation of the metal-ligand bond distances showed good agreement with those predicted by the trans effect. Raman spectroscopic analyses and the corresponding photophysical data are also recorded and compared. Among all isomers complex 1 showed the worst emission efficiency, while complexes 2 and 3 exhibited the greatest luminescent efficiency in solid state and in degassed CH(2)Cl(2) solution at room temperature, respectively. This structural relationship could be due to the simultaneously weakened hydride and the monodentate bdpH bonding that are destabilized by the trans-pyrazolate anion and cyclometalated benzyl group, respectively.

Pulse electrodeposition of iridium oxide on silicon nanotips for field emission study.

To improve electron field emission properties of anodic aluminum oxide (AAO) templated Si nanotips, IrO2 nanoparticles were deposited on the nanotips using bipolar pulse electrodeposition method. The IrO2 nanoparticles had a uniform size distribution with an average value of approximately 4 nm, and well dispersed on the ordered Si nanotips. Due to the small radius and a lower work function, the IrO2/Si nanotip exhibited field emission properties better than the bare Si nanotip with a field enhancement factor of approximately 128. The SEM and TEM were utilized to investigate the structure and morphology. The physical and chemical properties were evaluated XRD and X-ray photoelectron spectroscopy (XPS).

Blue-emitting Ir(III) phosphors with ancillary 4,6-difluorobenzyl diphenylphosphine based cyclometalate.

Treatment of difluorobenzyldiphenylphosphine with the Ir(III) dimer [(dfppy)2Ir(mu-Cl)]2 gives (N,N)-trans-[Ir(dfppy)2(dfbdpH)Cl], followed by skeletal isomerization to form its (N,N)-cis analogue, and then the fully cyclometalated complex [Ir(dfppy)2(dfbdp)]; the last complex and its derivative are suitable for fabrication of true-blue phosphorescent OLEDs.

Blue to true-blue phosphorescent Ir(III) complexes bearing a nonconjugated ancillary phosphine chelate: strategic synthesis, photophysics, and device integration.

We report the design and synthesis of Ir(III) complexes functionalized with substituted pyridyl cyclometalate or azolate chromophores, plus one newly designed nonconjugated phosphine chelate, which not only greatly restricts its participation in the lowest-lying electronic transition but also enhances the coordination strength. These two key factors lead to fine-tuning of the phosphorescence chromaticity toward authentic blue and simultaneously suppress, in part, the nonradiative deactivation. This conceptual design presents a novel strategy in achieving heretofore uncommon, high-efficiency blue and true-blue phosphorescence. The fabrication of the organic light-emitting devices (OLEDs) employing phosphorescent dopants [Ir(dfpbpy)(2)(P(wedge)N)] (1b) and [Ir(fppz)(2)(P(wedge)N)] (3) was successfully made, for which the abbreviations (dfpbpy)H, (fppz)H, and (P(wedge)N)H represent 2-(4,6-difluorophenyl)-4-tert-butylpyridine, 3-(trifluoromethyl)-5-(2-pyridyl)pyrazole, and 5-(diphenylphosphinomethyl)-3-(trifluoromethyl)pyrazole, respectively. Of particular interest is the 3-doped OLEDs, which exhibit remarkable maximum efficiencies of 6.9%, 8.1 cd A(-1), and 4.9 lm W(-1), together with a true-blue chromaticity CIE(x,y) = 0.163, with 0.145 recorded at 100 cd m(-2).

Luminescent platinum(II) complexes containing isoquinolinyl indazolate ligands: synthetic reaction pathway and photophysical properties.

New Pt(II) dichloride complexes [Pt(1-iqdzH)Cl2] (2a) and [Pt(3-iqdzH)Cl2] (2b), in which idqzH = 1- or 3-isoquinolinyl indazole, were prepared by treatment of the corresponding indazoles with K2PtCl4 in aqueous HCl solution. Despite their nonemissive nature, these complexes could react with excess indazole, sodium picolinate, and 3-trifluoromethyl-5-(2-pyridyl) pyrazole [(fppz)H] to afford the respective a and b series of luminescent complexes [Pt(1-iqdz)(L/\X)] and [Pt(3-iqdz)(L/\X)], where L/\X = 1-iqdz (1a), 3-iqdz (1b), pic (3a, 3b), and fppz (4a, 4b). Single-crystal X-ray diffraction studies of 1b, 2a, and 3b revealed a planar molecular geometry without notable intermolecular Pt...Pt contact in the solid crystal, a result of the steric repulsion imposed by the bulky indazole fragments. For coordination complexes 1, 3, and 4, photoluminescence in degassed CH2Cl2 revealed high quantum efficiency and short radiative lifetimes in the range of several microseconds. As supported by the spectral feature, the associated radiation lifetimes, and a computational approach based on time-dependent density function theory (TD-DFT), the origin of the emission is attributed to a mixed 3MLCT/3pipi transition. The TD-DFT approach further confirmed that, except for the series 1 complexes, the HOMO of 3-iqdz complexes 3b and 4b is much less located at the central Pt(II) atom than the HOMO orbitals of the respective 1-iqdz complexes 3a and 4a, leading to a smaller degree of MLCT contribution. Consequently, there are a blue-shifted emission signal and an inferior emission quantum yield for the 3-iqdz derivatives. OLED devices with a multilayer configuration of ITO/NPB/CBP:3a/BCP/Alq3/LiF/Al were fabricated using a CBP layer doped with various concentrations of 3a, ranging from 6% to 100%, within the emitting layer. The best device performance was realized using a 6% doping concentration, for which the external quantum yield of 4.93%, luminous efficiency of 12.19 cd/A, and power efficiency of 6.12 lm W-1 were observed at 20 mA/cm2, while a maximum luminescence as high as 20296 cd/m2 was also realized at 16 V, showing good prospect for the fabrication of Pt(II) based OLEDs.