Targeted next-generation sequencing for comprehensive genetic analysis of external apical root resorption during orthodontic treatment with premolar extraction in the Korean population.

INTRODUCTION: External apical root resorption (EARR) is one of the most common unfavorable consequences of orthodontic treatment and causes loss of tooth structure. The present study aimed to investigate the genetics of EARR using next-generation sequencing comprehensively. METHODS: Targeted next-generation sequencing was performed for comprehensive genetic analysis of 118 Korean orthodontic patients. The patients were divided into 2 groups on the basis of their EARR value. The association of clinical and genetic parameters with EARR was assessed using the χ2 test or t test for matched pairs, followed by Bonferroni correction and linear regression analysis. In addition, haplotype analysis and in silico prediction were conducted to evaluate functional effects. RESULTS: No statistically significant difference was observed between clinical and treatment-related parameters and EARR. The single nucleotide polymorphisms SPP1 rs9138 (P = 0.001) and SFRP2 rs3810765 (P = 0.04) showed only nominal significance between EARR groups. However, these 2 SNPs were not significant after Bonferroni correction for multiple testing (cutoff P = 0.05/142 = 3.52 × 10-4). Variations in SPP1 rs9138 and SFRP2 rs3810765 may be related to EARR during orthodontic treatment. In summary, not only genes related to inflammatory reactions but also those related to Wnt signaling to affect the degree of EARR during orthodontic teeth movement.

Clinical applications of miniscrews that broaden the scope of non-surgical orthodontic treatment.

Previously, in the case of malocclusion owing to skeletal discrepancy in adults, the amount of tooth movement was limited since there was no reliable skeletal anchorage device. The only way to treat this case was by repositioning the maxilla and mandible via orthognathic surgery, but most patients are reluctant to undergo surgery owing to the risk and expenses incurred. However, with the current introduction and use of miniscrews as temporary anchorage devices, the entire dental arch can be relocated to a target position without surgery, thus broadening the scope of non-surgical orthodontic treatment compared to the past. For a non-surgical approach to improve skeletal discrepancy, anteroposterior, vertical and transverse displacements of the dental arch are necessary. In this case, the localization of the centre of resistance of the whole arch must precede the appliance design with an appropriate biomechanical design. Especially, in the transverse dimension, the envelope of discrepancy is reportedly narrow, and the tooth movement must accompany the orthopaedic correction involving the midpalatal suture expansion. Recently, in adults with transverse maxillomandibular discrepancy, miniscrew-assisted rapid palatal expansion (MARPE) can be performed. Moreover, compared to surgically assisted rapid palatal expansion, MARPE reduces the cost to the patient and achieves clinically acceptable stable maxillary expansion. In this article, we will discuss the role of total arch movement and MARPE in widening the scope of non-surgical orthodontic treatment, despite the inherent limitations of miniscrews' mechanical aspects.

Tissue-specific biomarkers in gingival crevicular fluid are correlated with external root resorption caused by constant mechanical load: an in vivo study.

OBJECTIVES: This study investigated the association of changes in cementum protein-1 (CEMP-1), dentine phosphoprotein (DPP), and c-terminal cross-linked telopeptide of type I collagen (CTX-I) levels in human gingival crevicular fluid (GCF) under constant load with external root resorption volume and amount of tooth movement. MATERIALS AND METHODS: In total, 11 healthy adult patients (mean age, 23.5 years [range, 18.3-37.7]; four men and seven women) were enrolled. GCF samples were obtained from premolars at T0, T1 (1 day), T2 (1 week), T3 (2 weeks), T4 (4 weeks), and T5 (8 weeks) under constant 100-gm buccal tipping force. Opposite premolars were used as controls. Teeth were extracted at T5, followed by quantification of external root resorption volume and histological analysis. RESULTS: In the test group, T5/T0 ratios of CEMP-1 and DPP levels, differential CEMP-1 levels between T5 and T0, and differential DPP levels between T2 and T0 correlated positively with root resorption volume (r = 0.734, 0.730, 0.627, and 0.612, respectively, all p < 0.05). CEMP-1 levels at T0 and T3 correlated negatively with root resorption volume (r = -0.603 and -0.706; all p < 0.05). CTX-I levels at T5 correlated positively with the amount of tooth movement (r = 0.848, p < 0.01). CONCLUSIONS: Alterations in CEMP-1 and DPP levels in human GCF at specific timepoints during orthodontic treatment may be associated with different degrees of external root resorption. CLINICAL RELEVANCE: This study demonstrates that changes in the levels of tissue-specific biomarkers in GCF may facilitate early detection of external root resorption during orthodontic tooth movement.

Differences in soft-tissue thickness changes after bimaxillary surgery between patients with vertically high angle and normal angle.

INTRODUCTION: We evaluated soft-tissue thickness changes after bimaxillary surgery according to vertical facial patterns in patients with skeletal Class III malocclusion with mandibular prognathism. METHODS: Forty-three Korean patients (16 men and 27 women; mean age, 22.6 ± 4.1 years) with skeletal Class III malocclusion who underwent bimaxillary surgery were divided into 2 groups: normal-angle group (N group) and high-angle group (H group), on the basis of the presurgical angle of the mandibular plane relative to the sella-nasion plane (SN-MP). Changes in hard-tissue landmarks and soft-tissue thickness before and after surgery were analyzed from reconstructed 3-dimensional cone-beam computed tomography images. Postoperative soft-tissue thickness in both groups was compared with that in 40 patients with normal skeletal Class I malocclusion in the reference group. RESULTS: Group N (27°-37°) and group H (>37°) did not differ significantly in terms of sex and age before surgery. Preoperative pogonion (Pog) thickness was significantly less in group H (9.7 ± 1.6 mm) than in group N (10.8 ± 1.9 mm) (P = 0.042). Adjusted multiple linear regression analysis showed a weak positive linear relationship between the SN-MP before surgery and soft-tissue Pog thickness change (R2 of 0.361; P = 0.001) after surgery, but the area below the lower lips was not completely normalized despite surgery. CONCLUSIONS: The thickness of the soft-tissue Pog may increase slightly after surgery in patients with skeletal Class III malocclusion with a higher preoperative mandibular plane angle, but normalization in the area cannot be completely achieved despite surgery.

Evaluation of success rate and biomechanical stability of ultraviolet-photofunctionalized miniscrews with short lengths.

INTRODUCTION: The aim of this research was to verify that ultraviolet light (UV)-photofunctionalization improves the success rate and biomechanical stability of miniscrews regardless of length, and to evaluate the comparability of biomechanical stability between UV-photofunctionalized miniscrews with short lengths and untreated miniscrews with conventional lengths. METHODS: Eight male beagles (age, 12-15 months; weight, 10-13 kg) received a total of 64 miniscrews, including 7-mm and 4-mm untreated and UV-photofunctionalized, acid-etched miniscrews with the use of a random block design. The cumulative success rates were examined in all studied groups. The insertion and removal torques and screw mobility were measured. Microcomputed tomographic scans and histomorphometric analyses were performed at 8 weeks postoperatively. RESULTS: The success rates of 7-mm UV-untreated and UV-photofunctionalized miniscrews were 87.5% and 100%, respectively, vs 43.8% for the 4-mm UV-untreated and 4-mm UV-photofunctionalized miniscrews. The rates were significantly different in accordance with the length (P <0.001). There were no differences in the insertion and removal torque and screw mobility between groups according to the length or UV treatment. However, the 4-mm UV-untreated miniscrews yielded a mean bone area ratio of 6.35 ± 7.43%, whereas the 7-mm UV-photofunctionalized miniscrew yielded a mean ratio of 32.17 ± 8.34% (P = 0.037). CONCLUSIONS: The UV-photofunctionalization significantly increased the biomechanical stability and led to increased bone and miniscrew contact area in dogs with miniscrews of the same length. However, the most important factor that affected the success rate of the miniscrew was the length.

Accuracy of bracket position using thermoplastic and 3D-printed indirect bonding trays.

AIM: The positional accuracy of bracket placement planned through tooth setup vs actual placement was evaluated by means of conventional thermoplastic indirect bonding trays and customized 3D-printed indirect bonding trays. MATERIALS AND METHODS: A total of 280 bracket positions placed on the crowns of 10 dental plaster models were evaluated. The manual setup method and a thermoplastic indirect bonding tray were used for the manual group. For the CAD/CAM group, the bracket was positioned using a digital setup and a corresponding 3D-printed tray. The positional accuracy of the bracket placement on the duplicated gypsum model using the trays was evaluated by means of 3D software. Six errors of bracket position (height, depth, mesiodistal, torque, rotation, and tip errors), including linear and angular errors, were measured. Differences in variables were compared across subgroups using the independent t test or the Mann-Whitney U test. RESULTS: Only the height error differed significantly (P < 0.05) between groups (manual: 0.2 mm; CAD/CAM: 0.12 mm). For both incisors and molars, the manual group showed significantly greater height errors than the CAD/CAM group (P < 0.05). The analysis of variance of the position error to the whole bracket showed statistically significant differences between tooth positions, linear measurements, and angular measurements (P < 0.05). CONCLUSION: A 3D-printed indirect bonding tray showed accuracy similar to that of conventional methods for bracket placement, with slightly greater bracket height accuracy. Further studies should strive to improve accuracy in terms of tooth positions.

Registration of digital dental models and cone-beam computed tomography images using 3-dimensional planning software: Comparison of the accuracy according to scanning methods and software.

INTRODUCTION: The registration of cone-beam computed tomography (CBCT) images and digital dental models is required for the design and manufacturing of dental devices such as implant guides and surgical wafers. This study aims to register intraoral scan (IS) models and cast scan (CS) models onto CBCT images using 3-dimensional (3D) planning software and evaluate the registration accuracy according to scanning methods and 3D planning software. METHODS: The CBCT image of an artificial skull model with reference markers was taken. The CS model and the IS model were obtained from the same skull model, registered onto the CBCT image using 3D planning software packages providing manual registration (MR) function and point-based registration (PR) functions, and set as the experimental groups. After registration, shell to shell deviations and positional differences between the reference model and the experimental models were evaluated. RESULTS: The shell to shell deviations ranged from 0.03 to 0.18 mm. Deviations in both the maxilla and mandible were significantly different according to scanning methods and software packages. In the anteroposterior direction, the IS-MR and CS-MR groups showed significantly different positions. In the superoinferior direction, the MR and PR groups showed significantly different positions. CONCLUSIONS: The registration using the PR function of the 3D planning software packages was significantly more accurate than the registration using the MR function. There was no significant difference between the registrations using the IS model and the CS model when using the PR functions.

Local injection of RANKL facilitates tooth movement and alveolar bone remodelling.

OBJECTIVES: To investigate the effect of local injection of receptor activator of nuclear factor kappa B ligand (RANKL) on experimental tooth movement and subsequent alveolar bone remodelling in mice. MATERIALS AND METHODS: Sixty mice were randomised to receive daily local RANKL or phosphate-buffered saline injections in the buccal premaxillary bone for 14 of 21 days of incisor movement, followed by a 21-day retention period. Five mice from each group were euthanised on days 0, 3, 7, 14, 21 and 42, and specimens were prepared for haematoxylin and eosin, tartrate-resistant acid phosphatase and immunohistochemical staining. Five mice from each group were subjected to serial microcomputed tomography until day 42 for tooth movement and bone volume quantification. RESULTS: The experimental group showed significantly greater tooth movement and bone volume reduction on days 14 and 21; an increased osteoclast number on days 3, 7, 14 and 21; and no difference on day 42. Higher RANKL expression was observed on days 7 and 14, with remarkable alkaline phosphatase activity. No significant systemic changes were observed. CONCLUSION: Local RANKL injection leads to increased osteoclastic activity and facilitates tooth movement, followed by subsequent alveolar bone formation; this implies a reversible transitional acceleration of bone resorption.

The 3-dimensional zone of the center of resistance of the mandibular posterior teeth segment.

INTRODUCTION: We sought the 3-dimensional (3D) zone of the center of resistance (ZCR) of mandibular posterior teeth groups (group 1: first molar; group 2: both molars; group 3: both molars and second premolar; group 4: both molars and both premolars) with the use of 3D finite element analysis. METHODS: 3D finite element models comprised the mandibular posterior teeth, periodontal ligament, and alveolar bone. In the symmetric bilateral model, a 100-g midline force was applied on a median sagittal plane at 0.1-mm intervals to determine the anteroposterior and vertical positions of the ZCR (where the applied force induced translation). The most reliable buccolingual position of the ZCR was then determined in the unilateral model. The combination of the anteroposterior, vertical, and buccolingual positions was defined as the ZCR. RESULTS: The ZCRs of groups 1-4 were, respectively, 0.48, 0.46, 0.50, and 0.53 of the mandibular first molar root length from the alveolar crest level and located slightly distobuccally at anteroposterior ratios of 2:3.0, 2:2.3, 2:2.4, and 2:2.5 to each sectional arch length and at buccolingual ratios of 2:1.5, 2:1.1, 2:1.6, and 2:2.4 to the first molar's buccolingual width. CONCLUSIONS: The ZCR can be a useful reference for 3D movement planning of mandibular posterior teeth or segments.

Outcomes of early versus late treatment of severe Class II high-angle patients.

INTRODUCTION: The aim of this work was to compare the skeletal and dental outcomes of 1- versus 2-phase treatment in Class II subjects with difficult-to-treat high-angle severe Class II malocclusions. METHODS: The sample of 120 cases was collected from the private offices of 3 experienced clinicians. The following selection criteria were used: (1) ANB ≥6°, (2) SN-GoGn ≥37° or mandibular plane to Frankfort horizontal plane ≥30°; and (3) overjet ≥6 mm. Patients were classified into either the early or the late treatment group according to dental age (early Tx: ≥5 primary teeth; late Tx: otherwise). Thirty-four angular, linear, and proportional measurements were determined for each patient. Statistical significance was assessed with the use of a 2-tailed t test, analysis of covariance test, and chi-square test. RESULTS: The results showed that early 2-phase treatment for severe Class II high-angle patients offered no skeletal anteroposterior advantages over late 1-phase treatment. Severe high-angle Class II patients also showed similar dental anteroposterior outcomes with the use of both approaches. Vertically there was a higher frequency of increased mandibular plane angles and extrusion of upper incisors and lower molars in the late treatment group. CONCLUSIONS: Early 2-phase treatment for severe Class II high-angle patients offered no skeletal or dental advantage over late 1-phase treatment.

Long-Term Stability of Pre-Orthodontic Orthognathic Bimaxillary Surgery Using Intraoral Vertical Ramus Osteotomy Versus Conventional Surgery.

PURPOSE: The aim of the present study was to compare the long-term stability of bimaxillary surgery using an intraoral vertical ramus osteotomy (IVRO) with and without presurgical orthodontic treatment. MATERIALS AND METHODS: The present retrospective study included 31 consecutive patients with skeletal Class III malocclusions who had undergone bimaxillary surgery (Le Fort I osteotomy and bilateral IVRO). Patients were divided into 2 groups based on treatment type: pre-orthodontic orthognathic surgery (POGS; n = 17) and conventional surgery with presurgical orthodontic treatment (CS; n = 14). Lateral cephalograms were obtained before surgery, 1 day after surgery, 1 month after surgery, 1 year after surgery, and 2 years after surgery to evaluate skeletal and soft tissue changes between the 2 groups. Data were analyzed using χ2 tests, Mann-Whitney U tests, repeated-measures analyses of variance, and independent t tests. RESULTS: There was no significant difference in skeletal or soft tissue measurements-with the exception of the angle between the sella-and-nasion plane and the occlusal plane (SN-OP; P < .001)-between the CS and POGS groups at 2 years after IVRO. The SN-OP had increased in the CS group but decreased in the POGS group at 2 years after surgery. CONCLUSIONS: These findings suggest that POGS and CS have similar long-term stability in patients with skeletal Class III malocclusion.

Precision and trueness of dental models manufactured with different 3-dimensional printing techniques.

INTRODUCTION: In this study, we assessed the precision and trueness of dental models printed with 3-dimensional (3D) printers via different printing techniques. METHODS: Digital reference models were printed 5 times using stereolithography apparatus (SLA), digital light processing (DLP), fused filament fabrication (FFF), and the PolyJet technique. The 3D printed models were scanned and evaluated for tooth, arch, and occlusion measurements. Precision and trueness were analyzed with root mean squares (RMS) for the differences in each measurement. Differences in measurement variables among the 3D printing techniques were analyzed by 1-way analysis of variance (α = 0.05). RESULTS: Except in trueness of occlusion measurements, there were significant differences in all measurements among the 4 techniques (P <0.001). For overall tooth measurements, the DLP (76 ± 14 µm) and PolyJet (68 ± 9 µm) techniques exhibited significantly different mean RMS values of precision than the SLA (88 ± 14 µm) and FFF (99 ± 14 µm) techniques (P <0.05). For overall arch measurements, the SLA (176 ± 73 µm) had significantly different RMS values than the DLP (74 ± 34 µm), FFF (89 ± 34 µm), and PolyJet (69 ± 18 µm) techniques (P <0.05). For overall occlusion measurements, the FFF (170 ± 55 µm) exhibited significantly different RMS values than the SLA (94 ± 33 µm), DLP (120 ± 28 µm), and PolyJet (96 ± 33 µm) techniques (P <0.05). There were significant differences in mean RMS values of trueness of overall tooth measurements among all 4 techniques: SLA (107 ± 11 µm), DLP (143 ± 8 µm), FFF (188 ± 14 µm), and PolyJet (78 ± 9 µm) (P <0.05). For overall arch measurements, the SLA (141 ± 35 µm) and PolyJet (86 ± 17 µm) techniques exhibited significantly different mean RMS values of trueness than DLP (469 ± 49 µm) and FFF (409 ± 36 µm) (P <0.05). CONCLUSIONS: The 3D printing techniques showed significant differences in precision of all measurements and in trueness of tooth and arch measurements. The PolyJet and DLP techniques were more precise than the FFF and SLA techniques, with the PolyJet technique having the highest accuracy.

Effect of growth hormone treatment on craniofacial growth in children: Idiopathic short stature versus growth hormone deficiency.

BACKGROUND/PURPOSE: Few studies have evaluated craniofacial growth in boys and girls with idiopathic short stature (ISS) during growth hormone (GH) treatment. The aim of this study was to evaluate the effect of GH treatment on craniofacial growth in children with ISS, compared with those with growth hormone deficiency (GHD). METHODS: This study included 36 children (mean age, 11.3 ± 1.8 years) who were treated with GH consecutively. Lateral cephalograms were analyzed before and 2 years after start of GH treatment. RESULTS: There were no significant differences in age and sex between ISS and GHD groups and the reference group from semilongitudinal study (10 boys and 8 girls from each group). Before treatment, girls with ISS showed a skeletal Class II facial profile compared with the GHD and reference groups (p = 0.003). During GH treatment, the amount of maxillary length increased beyond norm in the ISS and GHD groups in boys (p = 0.035) > 3 standard deviation score (SDS). Meanwhile, mandibular ramus height (p = 0.001), corpus length, and total mandibular length (p = 0.007 for both) increased more in girls with ISS than in girls with GHD. Lower and total anterior facial heights increased more in girls with ISS than in girls with GHD (p = 0.021 and p = 0.007, respectively), > 7-11 SDS. CONCLUSION: GH should be administered carefully when treating girls with ISS, because GH treatment has great effects on vertical overgrowth of the mandible and can result in longer face.

Intraoral Vertical Ramus Osteotomy Results in Good Long-Term Mandibular Stability in Patients With Mandibular Prognathism and Anterior Open Bite.

PURPOSE: Few studies have evaluated the outcomes of intraoral vertical ramus osteotomy (IVRO) for the correction of skeletal Class III malocclusion with an anterior open bite and the potential for postoperative relapse. Therefore, this study evaluated the stability of outcomes of IVRO for mandibular prognathism with and without an anterior open bite. MATERIAL AND METHODS: This retrospective cohort study included consecutive patients with skeletal Class III malocclusion with (AOB group) and without (NAOB group) an anterior open bite who underwent IVRO at Yonsei Dental Hospital (Seoul, Korea). Lateral cephalograms were analyzed for predictor (open bite, yes or no) and outcome (horizontal and vertical relapse in the mandible) variables before and 7 days, 1 year, and 2 years after surgery. Other variables included the patients' demographic characteristics. Data were analyzed using independent t tests, repeated measures analysis of variance, Pearson correlation coefficients, and multiple linear regression analysis. RESULTS: The 2 groups (n = 15 each) were matched for baseline demographic characteristics. During the 2-year postoperative period, anterior and superior mandibular movements were observed in the NAOB group, whereas posterior and superior movements were observed in the AOB group. However, there were no meaningful intergroup differences in horizontal and vertical relapses of the mandible at all time points, although the amount of postoperative inferior relapse increased with a decrease in the amount of initial overbite. CONCLUSIONS: IVRO for the correction of skeletal Class III malocclusion resulted in good postoperative stability over time, regardless of the presence of a preoperative open bite, although the amount of postoperative inferior relapse showed a weak negative correlation with the initial overbite. Thus, IVRO can be a clinically acceptable treatment for skeletal Class III malocclusion with an anterior open bite.

Stability of Pre-Orthodontic Orthognathic Surgery Using Intraoral Vertical Ramus Osteotomy Versus Conventional Treatment.

PURPOSE: Postoperative skeletal and dental changes were evaluated in patients with mandibular prognathism who underwent mandibular setback surgery using an intraoral vertical ramus osteotomy (IVRO) with and without presurgical orthodontic treatment. MATERIAL AND METHODS: This retrospective cohort study included consecutive patients with skeletal Class III malocclusions who underwent IVRO. Patients treated with pre-orthodontic orthognathic surgery (POGS) were compared with patients treated with conventional surgery (CS) with presurgical orthodontics (control) using lateral cephalograms (taken preoperatively, 7 days postoperatively, and 12 months postoperatively). Predictor (group and timing), outcome (cephalometric measurements over time), and other (ie, baseline characteristics) variables were evaluated to determine the differences in postoperative horizontal and vertical positional changes of the mandible, such as point B. Baseline demographics were similar between the groups (N = 37; CS group, n = 17; POGS group, n = 20). The data were analyzed with an independent t test, the Mann-Whitney U test, the Fisher exact t test, Pearson correlation analysis, and simple linear regression analysis. RESULTS: The mean setback of the mandible at point B was similar, but the mandible of the POGS group, particularly the distal segment, moved superiorly during the postoperative period in conjunction with the removal of premature occlusal contacts (P < .001). In the CS group, the mandible had significantly more backward movement 12 months after surgery compared with the POGS group (P < .01). In the POGS group, horizontal and vertical postsurgical changes were linearly correlated with the amount of setback and vertical movement of the mandible. CONCLUSIONS: Mandibular setback surgery using IVRO without presurgical orthodontics leads to considerably different postoperative skeletal and dental changes compared with conventional treatment, with more superior movement being observed at point B during the 1-year postoperative period.

Is There a Difference in Stability After Intraoral Vertical Ramus Osteotomy Between Vertically High-Angle and Normal-Angle Patients?

PURPOSE: Few studies have evaluated the relapse pattern of intraoral vertical ramus osteotomy (IVRO) for the correction of mandibular prognathism with a high angle. The aim of this study was to measure the association between vertical facial types (high and normal mandibular plane angle) and relapse after IVRO for the management of mandibular prognathism. MATERIALS AND METHODS: The retrospective cohort study sample (skeletal Class III patients) was divided into 2 groups according to the angle of the sella-nasion plane relative to the mandibular plane (SN-MP) at the initial examination. Lateral cephalograms were analyzed for the predictor (facial type) and outcome (cephalometric changes over time) variables before surgery, 7 days after surgery, and 12 months after surgery. The 2 groups were matched for sample size (n = 20 in each). Data were analyzed using repeated-measures analysis of variance with Bonferroni correction. RESULTS: The normal-angle group (group N, SN-MP from 27° to 37°) and high-angle group (group H, SN-MP >37°) were not significantly different in terms of gender and age at the initial examination. Seven days after surgery, the mandibles in group H moved 2.5 mm more superiorly than those in group N (P = .013); consequently, the amount of overbite correction in group H was approximately 2 mm greater than that in group N (P = .002). Nevertheless, 12 months after surgery, there was no statistically significant difference in relapse of the maxilla and mandible between the 2 groups. In the 2 groups, the mandible moved approximately 0.7 mm superiorly during retention. CONCLUSIONS: These findings suggest that IVRO is a clinically acceptable and stable treatment modality for mandibular prognathism with a high angle.

Changes in the craniofacial complex and alveolar bone height of young adults: Applications to dental medicine.

The few studies on craniofacial complex changes in adults have reported contradictory findings. The aim of this study was to radiographically evaluate changes in the craniofacial complex and alveolar bone height of young adults over a 4-year period. This prospective study included 82 young adults (62 men; mean age, 19.0 ± 0.8 years; 20 women; mean age, 18.8 ± 0.9 years). Three radiographic examinations were performed longitudinally: the first (T0) was conducted at the start of the study, the second (T1) was conducted 2 years later, and the third (T2) was conducted at the end of the study period. As part of these examinations, lateral cephalograms, maxillary and mandibular anterior periapical radiographs, and bilateral posterior bitewing radiographs were obtained. During the 4-year follow-up period, all linear cephalometric measurements were significantly greater in men than in women. The amount of increase in the anterior facial height between T1 and T2 was lower in women than in men (P = 0.029). The rate of uprighting of the upper incisors was lower in men than in women over time (P = 0.020). The apex of the nose moved inferiorly between T0 and T2 (P = 0.006). The average overall change in the alveolar bone height was 0.27 mm and the yearly change was 0.07 mm over the 4-year period (P< 0.001). Significant changes in the skeletal, dental, and soft tissue, as well as, natural changes in alveolar bone, occur in young adults over time. Clin. Anat. 29:1011-1017, 2016. © 2016 Wiley Periodicals, Inc.

Evaluation of the surface characteristics of anodic oxidized miniscrews and their impact on biomechanical stability: An experimental study in beagle dogs.

INTRODUCTION: In this study, we aimed to assess the surface characteristics and the biomechanical stability of miniscrews with an anodic oxidized surface compared with machined surface miniscrews in beagle dogs. METHODS: Self-drilled, titanium-aluminum-vanadium alloy miniscrews with an anodic oxidized surface (n = 48) or a machined surface (n = 48) were placed into the mandibles of 12 beagle dogs. The surface characteristics of both types of miniscrews were analyzed before implantation with scanning electron microscopy and atomic force microscopy. Insertion torque was measured during placement of all 96 miniscrews. Half of the implants in each group (24 specimens per subgroup) received 200 to 250 g of tensile force for 3-week or 12-week loading periods. Removal torque was measured in 12 specimens of each subgroup, and bone-implant contact and bone volume were quantified in the other 12 specimens of each subgroup. RESULTS: Atomic force microscopy measurements demonstrated that the anodic oxidized surface miniscrews had significantly higher roughness parameters than did the machined surface miniscrews (P < 0.001). The 2 types of miniscrews were not significantly different in insertion and removal torque values or in bone-implant contacts and bone volumes, regardless of the loading period. CONCLUSIONS: Anodic oxidized miniscrews have different surface roughness profiles but no clinically significant superiority in biomechanical stability compared with machined surface miniscrews.

Effect of malocclusion severity on oral health-related quality of life and food intake ability in a Korean population.

INTRODUCTION: The aim of this study was to evaluate the effect of malocclusion severity on oral health-related quality of life and food intake ability in adult patients, controlling for sex, age, and the type of dental clinic visited. METHODS: The sample consisted of 472 Korean patients (156 male, 316 female) with a mean age of 21.1 (SD, 8.6) years in a dental hospital and a private clinic. The correlations between the Korean version of the Oral Health Impact Profile-14 (OHIP-14K), subjective food intake ability (FIA) for 5 key foods, and Index of Orthodontic Treatment Need-Dental Health Component (IOTN-DHC) were investigated. RESULTS: The mean IOTN-DHC and OHIP-14K scores were significantly higher for the dental hospital patients than for the private clinic patients (IOTN-DHC, P <0.001; OHIP-14K, P <0.05). Malocclusion severity was significantly higher in male than in female subjects (P <0.001). Older patients perceived their oral health-related quality of life more negatively than did the teens (P <0.001). As the severity of the malocclusion increased, oral health-related quality of life and masticatory function worsened (OHIP-14K, P <0.001; FIA, P <0.05). CONCLUSIONS: As the severity of the malocclusion and the age of the patients increased, oral health-related quality of life and masticatory function relatively deteriorated. This finding provides evidence that severe malocclusions are associated with lower quality of life and less masticatory efficiency in older patients.

Retrospective study of maxillary sinus dimensions and pneumatization in adult patients with an anterior open bite.

INTRODUCTION: The aim of this study was to evaluate differences in the maxillary sinus floor levels between adults with an anterior open bite and those without. METHODS: This retrospective study included 30 subjects: 15 adults with an anterior open bite (mean age, 21.5 ± 4.3 years) and 15 control subjects with normal occlusion (mean age, 21.7 ± 3.1 years). Cone-beam computed tomography and lateral cephalograms were analyzed before treatment. RESULTS: The open-bite group exhibited a significantly greater maxillary posterior alveolar height (P <0.05). The craniocaudal heights of the maxillary sinus in the region between the first and second molars and between the second premolar and first molar were significantly greater in the open bite group (40.5 and 39.0 mm, respectively) than in the control group (36.7 and 34.7 mm, respectively; P <0.05 for both). The basal bone heights in the regions between the first and second molars, the second premolar and first molar, and the first and second premolars were significantly smaller in the open-bite group than in the control group (P <0.001 for all). CONCLUSIONS: Vertical pneumatization of the maxillary sinus floor in the region between the first and second molars and between the second premolar and first molar is greater in adults with an anterior open bite than in those without, whereas basal bone height in the maxillary posterior region is lower in the open-bite patients.