RESUMEN
INTRODUCTION: The purpose of this study was to investigate the registration accuracy between intraoral-scanned crowns and cone-beam computed tomography (CBCT)-scanned crowns in various registration methods. METHODS: The samples consisted of 18 Korean adult patients, whose pretreatment intraoral scans and CBCT images were available. A 3-dimensional (3D) dental model was fabricated using a TRIOS intraoral scanner (3Shape, Copenhagen, Denmark) and the OrthoAnalyzer program (version 1.7.1.4; 3Shape). After the CBCT image was taken, 3D volume rendering was performed to fabricate a 3D dental model using InVivo5 software (version 5.1; Anatomage, San Jose, Calif). Registration of the 3D dental crowns made from intraoral- and CBCT-scanned images was performed with Rapidform 2006 software (Inus Technology, Seoul, Korea) by a single operator. According to registration methods, 3 groups were established: individual-arch-total-registration group, individual-arch-segment-registration group, and bimaxillary-arch-centric-occlusion-registration group (n = 18 per group). After the amounts of shell/shell deviation were obtained, the mixed model analysis of variance and Bonferroni correction were performed. RESULTS: Although there was no significant difference in the registration accuracy between the individual-arch-total-registration group and individual-arch-segment-registration group, the bimaxillary-arch-centric-occlusion-registration group exhibited the lowest registration accuracy (maxillary and mandibular teeth, all 0.21 mm in the individual-arch-total-registration group; all 0.20 mm in the individual-arch-segment-registration group vs 0.26 mm and 0.25 mm in the bimaxillary-arch-centric-occlusion-registration group; P <0.001). Color-coded visualization charts exhibited that most red spots were localized on the occlusal surface of the posterior teeth in all 3 groups. CONCLUSIONS: When considering the registration accuracy and convenience of the process, the individual-arch-total-registration method can be regarded as an efficient tool when integrating CBCT-scanned crown and intraoral-scanned crown.
Asunto(s)
Tomografía Computarizada de Haz Cónico , Modelos Dentales , Adulto , Coronas , Humanos , Procesamiento de Imagen Asistido por Computador , Imagenología Tridimensional , República de CoreaRESUMEN
INTRODUCTION: This research aimed to compare the estimation error of the root axis using 3-dimensional (3D) tooth models at the midtreatment stage between the whole-surface scan (WSS) and lingual-surface scan (LSS) methods. METHODS: The sample consisted of 208 teeth (26 each of central incisors, canines, second premolars, and first molars in the maxillary and mandibular dentition) from 13 patients whose pre- and midtreatment intraoral scan and cone-beam computed tomography (CBCT) were available. The 3D tooth models were constructed by merging the intraoral-scan crowns and the CBCT-scan roots obtained at the pretreatment stage. To estimate the root axis at the midtreatment stage, we superimposed the individual 3D tooth models onto the midtreatment intraoral scan obtained by the WSS and LSS methods. The midtreatment CBCT scan was used as the gold standard to determine the real root axis. The estimated root axis in terms of mesiodistal angulation and buccolingual inclination was measured in the WSS and LSS methods, and statistical analysis was performed. RESULTS: The estimation errors of the mesiodistal angulation and buccolingual inclination were <2.0° in both methods. The LSS method demonstrated a statistically larger but clinically insignificant estimation error than the WSS method in the mandibular canine (mesiodistal angulation, 1.95° vs 1.62°) and the total tested teeth (mesiodistal angulation, 1.40° vs 1.29°; buccolingual inclination, 1.51° vs 1.41°). CONCLUSIONS: Because the estimation errors of the root axis angle using the 3D tooth model by the WSS and LSS methods were within the clinically acceptable range, the root axis can be estimated by both methods.
Asunto(s)
Modelos Dentales , Raíz del Diente , Tomografía Computarizada de Haz Cónico , Humanos , Maxilar/diagnóstico por imagen , Corona del Diente/diagnóstico por imagen , Raíz del Diente/diagnóstico por imagenRESUMEN
INTRODUCTION: The purpose of this study was to examine changes in registration accuracy after including occlusal surface and incisal edge areas in addition to the buccal surface when integrating laser-scanned and maxillofacial cone-beam computed tomography (CBCT) dental images. METHODS: CBCT scans and maxillary dental casts were obtained from 30 patients. Three methods were used to integrate the images: R1, only the buccal and labial surfaces were used; R2, the incisal edges of the anterior teeth and the buccal and distal marginal ridges of the second molars were used; and R3, labial surfaces, including incisal edges of anterior teeth, and buccal surfaces, including buccal and distal marginal ridges of the second molars, were used. Differences between the 2 images were evaluated by color-mapping methods and average surface distances by measuring the 3-dimensional Euclidean distances between the surface points on the 2 images. RESULTS: The R1 method showed more discrepancies between the laser-scanned and CBCT images than did the other methods. The R2 method did not show a significant difference in registration accuracy compared with the R3 method. CONCLUSIONS: The results of this study indicate that accuracy when integrating laser-scanned dental images into maxillofacial CBCT images can be increased by including occlusal surface and incisal edge areas as registration areas.
Asunto(s)
Tomografía Computarizada de Haz Cónico/métodos , Aumento de la Imagen/métodos , Procesamiento de Imagen Asistido por Computador/métodos , Rayos Láser , Maxilar/diagnóstico por imagen , Simulación por Computador , Humanos , Modelos DentalesRESUMEN
INTRODUCTION: The purpose of this study was to assess the reproducibility of in-vivo and ex-vivo scans using an intraoral scanner. METHODS: Twenty adults with no missing teeth except for third molars were included in the study. Alginate impressions were taken, and plaster models were made from the impressions. Each subject underwent full-arch intraoral scanning twice with a TRIOS scanner (3Shape, Copenhagen, Denmark) at an interval of 2 weeks, and, the plaster models were scanned at the same interval with the same scanner. The first images of each scan were superimposed on the second scanned images using surface-based registration. In each case, the differences between the 2 scanned images were evaluated with color mapping. The reproducibility between the in-vivo and ex-vivo scans was compared using independent t tests and Bland-Altman analysis. RESULTS: The discrepancies between the first and second images were greater in the posterior than in the anterior regions for both the in-vivo and ex-vivo scans. Average surface differences between the first and second images were greater for the in-vivo scans (0.04 mm) than for the ex-vivo scans (0.02 mm). The Bland-Altman plots showed that the reproducibility of both scans was within the limits of agreement. CONCLUSIONS: The reproducibility of in-vivo scanning was comparable with ex-vivo scanning, although it showed a slight difference (0.02 mm) compared with ex-vivo scanning.
Asunto(s)
Imagenología Tridimensional , Diente/diagnóstico por imagen , Adulto , Técnica de Impresión Dental , Humanos , Reproducibilidad de los ResultadosRESUMEN
This case report describes a surgical orthodontic case that used the recently introduced surgery-first approach to correct a severe skeletal Class III malocclusion. A 19-year-old woman presented with severe mandibular prognathism and facial asymmetry; she had been waiting for growth completion in order to pursue surgical correction. After prediction of the postsurgical tooth movement and surgical simulation, 2-jaw surgery that included maxillary advancement and differential mandibular setback was performed using a surgery-first approach. Immediate facial improvement was achieved and postsurgical orthodontic treatment was efficiently carried out. The total treatment time was 16 months. The patient's facial appearance improved significantly and a stable surgical orthodontic outcome was obtained.
Asunto(s)
Asimetría Facial/complicaciones , Maloclusión de Angle Clase III/cirugía , Mandíbula/anomalías , Adulto , Tomografía Computarizada de Haz Cónico , Asimetría Facial/diagnóstico por imagen , Asimetría Facial/cirugía , Femenino , Humanos , Maloclusión de Angle Clase III/complicaciones , Maloclusión de Angle Clase III/diagnóstico por imagen , Mandíbula/diagnóstico por imagen , Mandíbula/cirugía , Radiografía PanorámicaRESUMEN
INTRODUCTION: Our objective was to investigate the dimensional accuracy of digital dental models obtained from the cone-beam computed tomography (CBCT) scans of alginate impressions according to the time elapsed after the impressions were taken. METHODS: Alginate impressions were obtained of 20 adults using 2 alginate materials: Alginoplast (Heraeus Kulzer, Hanau, Germany) and Cavex (Cavex Holland, Haarlem, The Netherlands). These impressions were stored in wet conditions and scanned by CBCT immediately after impression-taking and after storage times of 12, 24, 36, 48, 60, and 72 hours. After reconstruction of the 3-dimensional digital dental models, the models were measured, and the data were analyzed to determine the dimensional changes according to the time elapsed. The changes within the measurement error were regarded as clinically acceptable in this study. RESULTS: The measurement errors ranged from 0.27 to 0.29 mm in the digital dental models obtained from CBCT scans of the alginate impressions. All measurements showed decreasing accuracy with greater elapsed time after the impressions were taken. Changes above the measurement error occurred at 24 and 36 hours for Cavex and Alginoplast, respectively. CONCLUSIONS: Digital dental models can be obtained from CBCT scans of alginate impressions without sending them to a remote laboratory. However, the impressions need to be scanned within 24 hours; otherwise, dimensional changes lead to errors that exceed the error of measurement.
Asunto(s)
Alginatos/química , Tomografía Computarizada de Haz Cónico/estadística & datos numéricos , Materiales de Impresión Dental/química , Procesamiento de Imagen Asistido por Computador/estadística & datos numéricos , Imagenología Tridimensional/métodos , Modelos Dentales/estadística & datos numéricos , Adulto , Algoritmos , Técnica de Impresión Dental/estadística & datos numéricos , Femenino , Humanos , Masculino , Ensayo de Materiales , Propiedades de Superficie , Factores de Tiempo , Agua/químicaRESUMEN
OBJECTIVE: The purposes of this study were to evaluate the survival rate of a tube-type mandibular fixed retainer and compare it to conventional multistrand retainers. MATERIALS AND METHODS: In all, 66 patients who had completed their orthodontic treatment were enrolled in this study. They were allocated randomly to a tube-type retainer group or a 0.020 multistrand fixed retainer group. In case of the tube-type retainer, a thermoactive 0.012 NiTi was placed into 6â¯mini-tubes passively bonded to the anterior teeth. The patients were recalled at 1, 3, 6, 12, and 24 months after retainer placement. During the 2year follow-up period, any first-time failure of retainers was recorded. Kaplan-Meier survival analysis and log-rank tests were used to compare the failure rates between the two types of retainers. RESULTS: Of the 34 patients, 14 (41.2%) showed failure in the multistrand retainer group, whereas only 2 of 32 (6.3%) reported failure in the tube-type retainer group. There was a statistically significant difference in failure between the multistrand retainer and the tube-type retainer (log-rank test, Pâ¯= 0.001). The hazard ratio was 11.937 (95% confidence interval 2.708-52.620; Pâ¯= 0.005). CONCLUSION: The tube-type retainer can be used with fewer concerns about recurrent retainer detachments during orthodontic retention.
RESUMEN
OBJECTIVE: This study aimed to evaluate the accuracy of deep learning-based integrated tooth models (ITMs) by merging intraoral scans and cone-beam computed tomography (CBCT) scans for three-dimensional (3D) evaluation of root position during orthodontic treatment and to compare the fabrication process of integrated tooth models (ITMs) with manual method. MATERIAL AND METHODS: Intraoral scans and corresponding CBCT scans before and after treatment were obtained from 15 patients who completed orthodontic treatment with premolar extraction. A total of 600 ITMs were generated using deep learning technology and manual methods by merging the intraoral scans and CBCT scans at pretreatment. Posttreatment intraoral scans were integrated into the tooth model, and the resulting estimated root positions were compared with the actual root position at posttreatment CBCT. Discrepancies between the estimated and actual root position including average surface differences, arch widths, inter-root distances, and root axis angles were obtained in both the deep learning and manual method, and these measurements were compared between the two methods. RESULTS: The average surface differences of estimated and actual ITMs in the manual method were 0.02 mm and 0.03 mm for the maxillary and mandibular arches, respectively. In the deep learning method, the discrepancies were 0.07 mm and 0.08 mm for the maxillary and mandibular arches, respectively. For the measurements of arch widths, inter-root distances, and root axis angles, there were no significant differences between estimated and actual models both in the manual and in the deep learning methods, except for some measurements. Comparing the two methods, only three measurements showed significant differences. The procedure times taken to obtain the measurements were longer in the manual method than in the deep learning method. CONCLUSION: Both deep learning and manual methods showed similar accuracy in the integration of intraoral scans and CBCT images. Considering time and efficiency, the deep learning automatic method for ITMs is highly recommended for clinical practice.
Asunto(s)
Aprendizaje Profundo , Tomografía Computarizada de Haz Cónico Espiral , Tomografía Computarizada de Haz Cónico/métodos , Humanos , Maxilar/diagnóstico por imagen , Modelos Dentales , Raíz del Diente/diagnóstico por imagenRESUMEN
The aim of this study was to compare how the displacement of the mandibular condyle changed after symmetric or asymmetric mandibular setback surgery using the surgery-first approach (SFA). Patients who underwent mandibular setback surgery using the SFA were selected and divided into a symmetry group (n = 18) with differences of less than 2 mm between the right and left setback, and an asymmetry group (n = 18) with a difference of greater than 2 mm. Cone-beam computed tomography (CBCT)-generated cephalograms were obtained after three-dimensional superimposition of CBCT images taken before surgery (T0), within one week after surgery (T1), and seven months after surgery (T2). The condylar positions were measured. Condylar positional changes according to time were compared between the two groups and correlation analysis was performed. There were significant positional changes in mandibular condyles over time in both groups. However, most of these changes returned to their initial state. In the asymmetry group, there was a greater internal rotation of the mandibular condyle on the lesser setback side. The correlation analysis results revealed that only the setback difference was associated with rotational displacement of the condyle on the lesser setback side at two time points (T1-T0, T2-T0). In the SFA, significant condylar displacement occurred immediately after both symmetric and asymmetric mandibular setback surgery, and the right/left difference in mandibular setback showed a significant positive correlation with rotational displacement. Although more significant rotational displacement of the mandibular condyle was observed after asymmetric mandibular setback surgery, the amount was not large enough to be clinically significant.
Asunto(s)
Maloclusión de Angle Clase III , Prognatismo , Humanos , Prognatismo/cirugía , Osteotomía Sagital de Rama Mandibular/efectos adversos , Osteotomía Sagital de Rama Mandibular/métodos , Estudios Retrospectivos , Maloclusión de Angle Clase III/cirugía , Cóndilo Mandibular/diagnóstico por imagen , Cóndilo Mandibular/cirugíaRESUMEN
OBJECTIVES: To investigate the association between three-dimensional (3D) skeletal variables and self-recognition of facial asymmetry in skeletal Class III patients. MATERIALS AND METHODS: Questionnaires and cone beam computed tomography of 74 patients (42 men and 32 women; mean age: 22.8 ± 4.5 years) with skeletal Class III and facial asymmetry were collected retrospectively. Patients were classified into three groups: group Sy (recognition of symmetry), group NS (not sure), and group Asy (recognition of asymmetry), according to their responses to the questionnaires. To assess 3D anatomic differences in the maxillomandibular region, six 3D hard tissue variables: maxillary height, ramal length, frontal ramal inclination (FRI), lateral ramal inclination (LRI), mandibular body length (Mn BL), and mandibular body height (Mn BH) were compared among the three self-recognition groups. Six 3D hard tissue variables and Menton deviation were reduced into three factors and their association with the self-recognition of facial asymmetry was investigated. RESULTS: Maxillary height, FRI, LRI, Mn BH, and Menton deviation demonstrated significant differences among the three self-recognition groups. The reduced factors, which consisted of transverse and vertical parameters, and vertical parameter of the mandibular corpus, demonstrated significant differences among the three self-recognition groups. The difference in Mn BH influenced the self-recognition of facial asymmetry. CONCLUSIONS: Both the transverse and vertical parameter of the skeleton were determinant in self-recognition of facial asymmetry. Identification of the skeletal difference in the lateral view involving LRI and Mn BH should be included for assessment of facial asymmetry.
Asunto(s)
Asimetría Facial , Maloclusión de Angle Clase III , Adolescente , Adulto , Cefalometría/métodos , Tomografía Computarizada de Haz Cónico , Asimetría Facial/diagnóstico por imagen , Femenino , Humanos , Imagenología Tridimensional/métodos , Masculino , Maloclusión de Angle Clase III/diagnóstico por imagen , Mandíbula/diagnóstico por imagen , Estudios Retrospectivos , Adulto JovenRESUMEN
Root damage is a significant complication of orthodontic miniscrew implant placement. Although root damage is rare, its proper management should be clearly understood by practitioners. This article reports the iatrogenic root perforation of a mandibular lateral incisor caused by the placement of a miniscrew. Despite a large radiolucent area caused by chronic apical periodontitis, the perforation was successfully repaired by using a recently developed material, mineral trioxide aggregate. The treatment, clinical implications, and clinical guidelines for preventing root damage during miniscrew placement in orthodontic practice are discussed.
Asunto(s)
Implantes Dentales/efectos adversos , Enfermedad Iatrogénica , Incisivo/lesiones , Métodos de Anclaje en Ortodoncia/efectos adversos , Raíz del Diente/lesiones , Compuestos de Aluminio/uso terapéutico , Apicectomía/métodos , Compuestos de Calcio/uso terapéutico , Enfermedad Crónica , Combinación de Medicamentos , Estudios de Seguimiento , Humanos , Incisivo/cirugía , Masculino , Mandíbula/patología , Persona de Mediana Edad , Métodos de Anclaje en Ortodoncia/instrumentación , Óxidos/uso terapéutico , Periodontitis Periapical/etiología , Periodontitis Periapical/cirugía , Obturación Retrógrada/métodos , Materiales de Obturación del Conducto Radicular/uso terapéutico , Silicatos/uso terapéutico , Colgajos Quirúrgicos , Raíz del Diente/cirugíaRESUMEN
INTRODUCTION: A precision 3-dimensional (3D) head model can be fabricated by integrating a digital dental model into a maxillofacial 3D image. The integration requires accurate registration of 2 image modalities. The aims of this study were to determine the registration errors for implementation of laser-scanned dental images into cone-beam computed tomography (CBCT) scan data and to examine the influence of the registration area on the accuracy of registration. METHODS: The CBCT scans were obtained from 30 adults, and the maxillofacial 3D images were reconstructed. Maxillary and mandibular dental casts were taken from the same subjects and scanned with a 3D laser scanner. The laser-scanned maxillary and mandibular dentition images were incorporated into the CBCT images of each arch in 3 ways according to the registration area: only the buccal surfaces, only the lingual surfaces, and both the buccal and lingual surfaces. Surface-based registration was performed by using an iterative closest point algorithm, and its errors were evaluated by measuring the 3D Euclidean distances between the surface points on the 2 images. RESULTS: The registration errors ranged from 0.27 to 0.33 mm. The mandibular arch did not show significant differences in registration errors according to the selected area for the registration. The maxillary arch, however, showed significant differences according to the registration area. When the lingual surfaces only were used for registration, the errors were greater than for the other 2 methods. The errors were least when both the buccal and lingual surfaces were used for registration. CONCLUSIONS: The results of this study indicate that accuracy in the integration of laser-scanned dental images into the maxillofacial CBCT images increases when a broad area is used for registration.
Asunto(s)
Tomografía Computarizada de Haz Cónico/métodos , Huesos Faciales/anatomía & histología , Procesamiento de Imagen Asistido por Computador/normas , Maxilares/anatomía & histología , Rayos Láser , Diente/anatomía & histología , Adulto , Algoritmos , Simulación por Computador , Arco Dental/anatomía & histología , Femenino , Encía/anatomía & histología , Humanos , Aumento de la Imagen/métodos , Masculino , Mandíbula/anatomía & histología , Maxilar/anatomía & histología , Modelos Dentales , Programas Informáticos , Adulto JovenRESUMEN
The purpose of this retrospective study was to elucidate potential confounding factors affecting initial stability of miniscrews inserted to enhance orthodontic anchorage. Four hundred and seven miniscrews inserted in 168 patients treated by 17 orthodontic residents were analysed in a consecutive chart review. The outcome variable was the stability of the miniscrew, measured as a dichotomous variable, 0 if the miniscrew loosened during a 1 week period after insertion to the time of orthodontic force application and a value of 1 otherwise. Potential confounding variables examined were gender, age, jaw, insertion site, tissue type, length and diameter of the miniscrew, and number of previous insertions. Generalized estimating equations (GEE) methods were used to estimate the influence of each factor on stability for the correlated binary outcomes of each patient. A weighted analysis for the GEE approach was also performed for the convergence calculation of the estimation procedure due to a value of 0 in one of the cells. Crude odds ratio (cOR) and adjusted odds ratio (aOR) and their 95 per cent confidence intervals (CI) were calculated for this purpose. The overall success rate after 1 week was 93.1 per cent (379/407). The screws inserted by more experienced clinicians (more than 20 miniscrews) were found to have approximately a 3.6-fold higher success rate of initial stability compared with those inserted by less experienced clinicians after adjusting for the insertion site (aOR = 3.63, P = 0.015). The results of the present study suggest that the initial stability depends on insertion site and clinician experience.
Asunto(s)
Implantación Dental Endoósea/métodos , Implantes Dentales , Métodos de Anclaje en Ortodoncia/instrumentación , Diseño de Aparato Ortodóncico , Adolescente , Adulto , Tornillos Óseos , Competencia Clínica , Implantación Dental Endoósea/instrumentación , Fracaso de la Restauración Dental , Femenino , Humanos , Masculino , Oseointegración , Valor Predictivo de las Pruebas , Estudios Retrospectivos , Factores de Riesgo , Factores Sexuales , Resultado del Tratamiento , Adulto JovenAsunto(s)
Pérdida de Hueso Alveolar/complicaciones , Incisivo/patología , Diseño de Aparato Ortodóncico , Aparatos Ortodóncicos , Migración del Diente/terapia , Fenómenos Biomecánicos , Aleaciones Dentales/química , Femenino , Humanos , Persona de Mediana Edad , Miniaturización , Níquel/química , Alambres para Ortodoncia , Titanio/química , Migración del Diente/etiología , Técnicas de Movimiento Dental/instrumentación , Técnicas de Movimiento Dental/métodosRESUMEN
OBJECTIVE: The aim of this study was to examine whether integration accuracy increases upon removing artifacts from the registration area when integrating maxillofacial cone beam computed tomography (CBCT) scans and intraoral scans. STUDY DESIGN: Three methods were implemented according to the region of interest (ROI): R0, all teeth included as the registration area (artifacts included); R1, anterior teeth included as the registration area (artifacts in premolars and molars not included); and R2, anterior teeth and second molars included as the registration area (artifacts in premolars and first molars not included). Discrepancies between the 2 images were evaluated by using color-mapping methods. The average surface distance was calculated by measuring the shell/shell deviations for overall discrepancies and 3-dimensional distances between the surface points on the 2 images for registration discrepancies. RESULTS: The R1 method showed more discrepancies between the CBCT and intraoral scans compared with the other 2 methods. The R2 method showed smaller overall discrepancy values compared with the R1 method. Most CBCT artifacts were located in the posterior area. Registration discrepancies were greatest in the x-dimension. CONCLUSIONS: The results suggest that intraoral and CBCT scans might be integrated by using a registration method that involves exclusion of artifacts and inclusion of the second molar on both sides.
Asunto(s)
Modelos Dentales , Diente , Artefactos , Tomografía Computarizada de Haz Cónico , HumanosRESUMEN
PURPOSE: The purpose of this study was to evaluate the accuracy of virtual 3-dimensional (3D) cephalograms constructed using the principle of biplanar radiography by comparing them with cone-beam computed tomography(CBCT) images. MATERIALS AND METHODS: Thirty orthodontic patients were enrolled in this study. Frontal and lateral cephalograms were obtained with the use of a head posture aligner and reconstructed into 3D cephalograms using biplanar radiography software. Thirty-four measurements representing the height, width, depth, and oblique distance were computed in 3 dimensions, and compared with the measurements from the 3D images obtained by CBCT, using the paired t-test and Bland-Altman analysis. RESULTS: Comparison of height, width, depth, and oblique measurements showed no statistically significant differences between the measurements obtained from 3D cephalograms and those from CBCT images (P>0.05). Bland-Altman plots also showed high agreement between the 3D cephalograms and CBCT images. CONCLUSION: Accurate 3D cephalograms can be constructed using the principle of biplanar radiography if frontal and lateral cephalograms can be obtained with a head posture aligner. Three-dimensional cephalograms generated using biplanar radiography can replace CBCT images taken for diagnostic purposes.
RESUMEN
BACKGROUND AND OVERVIEW: Ectopic eruption of permanent molars is one of the challenges that arise in the early mixed dentition period, particularly when the root of the primary second molar is resorbed due to mesial angulation of the impacted first molar. The authors introduce a simple and efficient method to unlock ectopically erupting first molars using a light wire. CASE DESCRIPTION: The authors describe the cases of 2 girls (8 and 7 years old) who sought treatment for locking of their maxillary and mandibular first molars, respectively. A 0.012-inch nickel titanium wire was compressed and bonded to the first molars and primary second molars to unlock the first molars. The primary second molars were splinted to the adjacent primary first molars and canines using bonded multistranded wires. As the compressed wires straightened over time, the locked first molars were tipped back without any substantial mesial movement of the primary teeth. After unlocking the molars, the nickel titanium wires were removed to allow spontaneous eruption of the first molars. CONCLUSIONS AND PRACTICAL IMPLICATIONS: Although the primary molar roots were considerably resorbed, the ectopically erupting first molars were unlocked successfully without any substantial movement of the primary teeth. The clinical procedure was simple, and no laboratory procedures were needed. In addition, the anchorage burden was reduced with the use of light forces. The authors suggest that primary second molars with substantial root resorption due to ectopic eruption of permanent first molars can be saved simply and efficiently.
Asunto(s)
Resorción Radicular , Erupción Ectópica de Dientes , Diente Impactado , Femenino , Humanos , Maxilar , Diente Molar/cirugía , Erupción Dental , Técnicas de Movimiento Dental , Diente Impactado/cirugíaRESUMEN
OBJECTIVE: To evaluate the construction reproducibility of a composite tooth model (CTM) composed of an intraoral-scanned crown and a cone-beam computed tomography (CBCT)-scanned root. METHODS: The study assessed 240 teeth (30 central incisors, 30 canines, 30 second premolars, and 30 first molars in the maxillary and mandibular arches) from 15 young adult patients whose pre-treatment intraoral scan and CBCT were available. Examiner-Reference (3 years' experience in CTM construction) and Examiners-A and Examiner-B (no experience) constructed the individual CTMs independently by performing the following steps: image acquisition and processing into a three-dimensional model, integration of intraoral-scanned crowns and CBCT-scanned teeth, and replacement of the CBCT-scanned crown with the intraoral-scanned crown. The tooth axis angle in terms of mesiodistal angulation and buccolingual inclination of the CTMs constructed by the three examiners were measured. To assess the construction reproducibility of CTMs, intraclass correlation coefficient (ICC) assessments were performed. RESULTS: The ICC values of mesiodistal angulation and buccolingual inclination among the 3 examiners showed excellent agreement (0.950-0.992 and 0.965-0.993; 0.976-0.994 and 0.973-0.995 in the maxillary and mandibular arches, respectively). CONCLUSIONS: The CTM showed excellent construction reproducibility in mesiodistal angulation and buccolingual inclination regardless of the construction skill and experience levels of the examiners.
RESUMEN
INTRODUCTION: The purpose of this study was to investigate various factors associated with initial miniscrew stability for the prediction of the success rate. METHODS: A total of 378 miniscrews in 154 patients were examined by reviewing their charts. Potential confounding variables examined were age, sex, jaw (maxilla or mandible), placement site, tissue mobility (firm or movable tissue), type, length, and diameter of the miniscrew, and the number of previous operations. The outcome variable of this study was initial stability, defined as the stability of the miniscrew from placement to orthodontic force application. We used the generalized estimating equations method to estimate the influence of each factor on stability for the correlated outcomes of each patient. RESULTS: The overall success rate was 83.6% for all miniscrews (316 of 378). After adjusting for the type of miniscrew, the relative success rate in the mandible was 0.48 times that in the maxilla but without statistical significance (crude odds ratio = 0.52, P = 0.13; adjusted odds ratio = 0.48, P = 0.09). There was no statistically significant association of any factors in this model with respect to initial stability. CONCLUSIONS: These results suggest that initial stability cannot be guaranteed or predicted. For this reason, any treatment plan should consider the possibility of failure.
Asunto(s)
Tornillos Óseos , Implantación Dental Endoósea/métodos , Métodos de Anclaje en Ortodoncia/instrumentación , Oseointegración , Factores de Edad , Densidad Ósea , Competencia Clínica , Oclusión Dental Céntrica , Análisis Factorial , Femenino , Predicción , Humanos , Modelos Lineales , Masculino , Mandíbula/cirugía , Maxilar/cirugía , Miniaturización , Diseño de Aparato Ortodóncico , Paladar Duro/cirugía , Factores Sexuales , Resultado del Tratamiento , Adulto JovenRESUMEN
INTRODUCTION: The purposes of this study were to determine bone density at various orthodontic implant sites and compare them according to depth and area (anterior and posterior, buccal and lingual, and maxilla and mandible). METHODS: Maxillofacial computed tomography scan data were obtained from 30 adults with normal occlusion. Bone density was recorded in Hounsfield units with simulated placement of miniscrews with the V-Implant program (CyberMed, Seoul, Korea). Bone density was measured to a depth of 6 mm at 1-mm intervals in 60 interdental areas (30 in the maxilla, 30 in the mandible), and mean bone density was calculated at each site. RESULTS: Bone density tended to decrease with increasing depth, particularly in the posterior area. Mean bone density showed a progressive increase from posterior to anterior except for the mandibular buccal side, which had no significant differences. A comparison of the mean bone densities between the buccal and lingual sides in the mandible showed that the lingual side had higher values in the anterior area and vice versa in the posterior area. On the other hand, there were no distinct differences between the buccal and lingual sides in the maxilla. A comparison of the mean bone densities between the maxilla and the mandible showed higher values in the mandible, and these differences were more significant on the buccal side of the posterior. CONCLUSIONS: The differences in bone densities according to depth and area should be considered when selecting and placing miniscrew implants for orthodontic anchorage.