RESUMEN
A graphite-like material boron carbide (BCx) was synthesized under various heat treatment conditions and extensively characterized. First, we synthesized the BCx precursor phase by a single-step reaction using a mixed solution of BBr3 and C6H6. We confirmed that the precursor phase had a graphite-like structure with B-C chemical bonds, but its crystallinity was poor. To improve their crystallinity, we annealed the precursor sample at high temperature using a high-frequency furnace and determined the annealing condition. We also investigated the magnetic properties of BCx. The high-temperature annealing for the precursor phase yields the highest Pauli paramagnetic susceptibility χPauli, indicating the highest density of states at the Fermi level. Accordingly, the high-temperature treatment for the precursor phase is significant to improve its crystallinity and physical properties. In addition, we synthesized a Ti-intercalated material TiBC by using the same procedure as that for making the BCx precursor phase. The crystal structure can be indexed by the AlB2 structure, indicating that Ti atoms are intercalated between the BC layers. The χPauli value of TiBC is obtained to be 1 order of magnitude smaller than that of BCx, suggesting the compensation of hole carriers by electron doping through Ti intercalation into the BCx system.
RESUMEN
Efforts to identify and develop new superconducting materials continue apace, motivated by both fundamental science and the prospects for application. For example, several new superconducting material systems have been developed in the recent past, including calcium-intercalated graphite compounds, boron-doped diamond and-most prominently-iron arsenides such as LaO(1-x)F(x)FeAs (ref. 3). In the case of organic superconductors, however, no new material system with a high superconducting transition temperature (T(c)) has been discovered in the past decade. Here we report that intercalating an alkali metal into picene, a wide-bandgap semiconducting solid hydrocarbon, produces metallic behaviour and superconductivity. Solid potassium-intercalated picene (K(x)picene) shows T(c) values of 7 K and 18 K, depending on the metal content. The drop of magnetization in K(x)picene solids at the transition temperature is sharp (<2 K), similar to the behaviour of Ca-intercalated graphite. The T(c) of 18 K is comparable to that of K-intercalated C(60) (ref. 4). This discovery of superconductivity in K(x)picene shows that organic hydrocarbons are promising candidates for improved T(c) values.
RESUMEN
The magnetocapacitance effect was investigated using impedance spectroscopy on single crystals of LuFe(2)O(4). The intrinsic impedance response could be separated from the interfacial response and showed a clear hysteresis loop below T(Ferri)â¼240 K under the magnetic field. The neutron diffraction experiment under the magnetic field proves the origin of the dielectric property related to the motion of the nanosized ferromagnetic domain boundary. These results imply that the modification of the microscopic domain structure is responsible for the magnetoelectric effect in LuFe(2)O(4).
RESUMEN
An epitaxial film of YbFe2O4, a candidate for oxide electronic ferroelectrics, was fabricated on yttrium-stabilized zirconia (YSZ) substrate by magnetron sputtering technique. For the film, second harmonic generation (SHG), and a terahertz radiation signal were observed at room temperature, confirming a polar structure of the film. The azimuth angle dependence of SHG shows four leaves-like profiles and is almost identical to that in a bulk single crystal. Based on tensor analyses of the SHG profiles, we could reveal the polarization structure and the relationship between the film structure of YbFe2O4 and the crystal axes of the YSZ substrate. The observed terahertz pulse showed anisotropic polarization dependence consistent with the SHG measurement, and the intensity of the emitted terahertz pulse reached about 9.2% of that emitted from ZnTe, a typical nonlinear crystal, implying that YbFe2O4 can be applied as a terahertz wave generator in which the direction of the electric field can be easily switched.
RESUMEN
Ferroelectric materials are widely used in modern electric devices such as memory elements, filtering devices and high-performance insulators. Ferroelectric crystals have a spontaneous electric polarization arising from the coherent arrangement of electric dipoles (specifically, a polar displacement of anions and cations). First-principles calculations and electron density analysis of ferroelectric materials have revealed that the covalent bond between the anions and cations, or the orbital hybridization of electrons on both ions, plays a key role in establishing the dipolar arrangement. However, an alternative model-electronic ferroelectricity-has been proposed in which the electric dipole depends on electron correlations, rather than the covalency. This would offer the attractive possibility of ferroelectric materials that could be controlled by the charge, spin and orbital degrees of freedom of the electron. Here we report experimental evidence for ferroelectricity arising from electron correlations in the triangular mixed valence oxide, LuFe(2)O(4). Using resonant X-ray scattering measurements, we determine the ordering of the Fe(2+) and Fe(3+) ions. They form a superstructure that supports an electric polarization consisting of distributed electrons of polar symmetry. The polar ordering arises from the repulsive property of electrons-electron correlations-acting on a frustrated geometry.
RESUMEN
Skewed band structures have been empirically described in ferroelectric materials to explain the functioning of recently developed ferroelectric tunneling junction (FTJs). Nonvolatile ferroelectric random access memory (FeRAM) and the artificial neural network device based on the FTJ system are rapidly developing. However, because the actual ferroelectric band structure has not been elucidated, precise designing of devices has to be advanced through appropriate heuristics. Here, we perform angle-resolved hard X-ray photoemission spectroscopy of ferroelectric BaTiO3 thin films for the direct observation of ferroelectric band skewing structure as the depth profiles of atomic orbitals. The depth-resolved electronic band structure consists of three depth regions: a potential slope along the electric polarization in the core, the surface and interface exhibiting slight changes. We also demonstrate that the direction of the energy shift is controlled by the polarization reversal. In the ferroelectric skewed band structure, we found that the difference in energy shifts of the atomic orbitals is correlated with the atomic configuration of the soft phonon mode reflecting the Born effective charges. These findings lead to a better understanding of the origin of electric polarization.
RESUMEN
The partial oxidation of [Ni(II/II)(2)(RCS(2))(4)] (R = Et (1), n-Pr (2), and n-Bu (3)) with iodine affords the MMX chain compounds [Ni(II/III)(2)(RCS(2))(4)I](infinity) (R = Et (4), n-Pr (5), and n-Bu (6)), respectively. The crystal structures of 4-6 consist of neutral one-dimensional (1-D) chains with a repeating -Ni-Ni-I- unit. The room-temperature (RT) structure of 4 indicates a charge-polarization (CP) state {-Ni((2.5-delta)+)-Ni((2.5+delta)+)-I(-)-Ni((2.5-delta)+)-Ni((2.5+delta)+)-I(-)- (delta << 0.5)} close to an averaged valence state judged by the Ni-I distances. In contrast, 5 and 6 exhibit a 3-fold periodicity of a -Ni-Ni-I- unit due to the disorder of the dithiocarboxylato ligands. Compounds 4-6 show typical semiconducting behavior and exhibit an intense sharp absorption band centered at 5400 cm(-1), which is attributed to a Mott-Hubbard gap due to a relatively large on-site Coulomb repulsion energy U of the nickel atoms. The high-temperature magnetic susceptibilities of 4-6 can be described by a 1-D Heisenberg antiferromagnetic chain model with |J|/k(B) ranging from 898(2) to 939(3) K. Compounds 4 and 5 undergo a spin-Peierls (SP) transition at relatively high T(sp) = 47 and 36 K, respectively, which are accompanied by superlattice reflections corresponding to a 2-fold -Ni-Ni-I- period below T(sp). By determining the superstructure of 4 at 26 K, we conclude that the valence-ordered state changes from the CP in the RT phase to the alternate charge-polarization (ACP) state of -Ni((2.5-delta)+)-Ni((2.5+delta)+)-I(-)-Ni((2.5+delta)+)-Ni((2.5-delta)+)-I(-)- in the SP phase. Such a spin-Peierls transition could not be observed for 6.
RESUMEN
The magnetic and dielectric properties of InFe2O4, InFeCuO4, and InGaCuO4 have been investigated. All these materials are isostructural with RFe2O4 (R = Y, Ho-Lu), which shows ferroelectricity due to iron-valence ordering. InFe2O4 exhibits ferrimagnetic ordering at T(C) approximately 242 K and a dielectric constant (epsilon) of approximately 10,000 at around room temperature. These properties resemble those of RFe2O4; the origins of the magnetic and dielectric phenomena are likely common in InFe2O4 and RFe2O4. From measurements of the other two materials, we found that both T(C) and epsilon are decreased in the order of InFe2O4, InFeCuO4, and InGaCuO4. This result strongly supports the previously reported explanation based on an electron transfer between the Fe-site ions for the corresponding rare-earth systems. Therefore, we propose that the dielectric properties of the oxides isostructural with RFe2O4 are plausibly governed by electron transfer; this situation is different from that of ordinary ferroelectrics and dielectrics, in which the displacement of cations and anions is important. In addition, InFeCuO4 and InGaCuO4 exhibit large epsilon values (epsilon > approximately 1500). In consideration of this property, we discuss the possible applications of these oxides.
RESUMEN
We give a brief review of the experimental research on a triangular mixed valence iron oxide RFe2O4 (R = Y, Dy, Ho, Er, Tm, Yb, Lu, Sc or In). Interest in this material has been increasing every year because of the fascinating but complicated interaction between spin, charge and the orbital state of iron ions in frustrated geometry. Reports collected in this review cover experimental research on crystallography, chemical analysis, bulk and thin film preparation, magnetic, dielectric, diffraction with neutrons, x-ray and electron, optical and x-ray absorption, Mössbauer spectroscopy and other methods that incorporate the use of modern scientific technology and knowledge. The report mainly focuses on experimental facts since 1990 on which an early review by Siratori has been published (Kimizuka et al 1990 Handbook on the Physics and Chemistry of Rare Earths vol 13, ed K A Gschneidner Jr and L Eyring (Amsterdam: North-Holland/Elsevier) pp 283-384).
RESUMEN
We report the observation of a modulated structure and a ferromagnetic insulating state in a high quality single crystal of a nine-layer BaRuO(3). Using x-ray scattering, the modulated satellites were observed to double the unit cell along the c-axis at low temperature. The ferromagnetic insulating state is confirmed by magnetic and resistivity measurements. Analyzing the peak profiles from the modulation and host structure respectively, showed a lattice distortion at Tâ¼55 K. These findings elucidate the intimate relationship between ferromagnetism and lattice distortion in a nine-layer BaRuO(3).
RESUMEN
A powerful method to determine the hidden structural parameters in functional molecules has been developed. Local valence arrangements that dominate the material properties are sometimes not three-dimensionally ordered. This method that comprises diffuse X-ray scattering and resonant X-ray scattering is suitable in such cases. Using this method, we present clear evidence of the low-dimensional valence arrangement in two halogen-bridged one-dimensional metal complexes, so-called MMX chains. This family allows us to control many physical and structural parameters by chemical substitution of bridging halogen, counterions, or metal ions, and one of our samples carries an unusual metallic phase. It is demonstrated with this complex that the present method makes it possible to have microscopic insight to low-dimensionally ordered systems.
RESUMEN
The molecular alignment of a merocyanine (MC) J-aggregate monolayer at the air-water interface was determined by a grazing incidence x-ray diffraction method. The obtained molecular arrangement apparently shows that the conventional formula, which accounts only for the transition dipole interaction, is not sufficient to figure out the exciton band wavelength, suggesting the importance of the electric dipole (ED) interaction. We derived a simple formula for the ED interaction energy under an extended dipole approximation and clarified the ED contribution in the MC J aggregate.