Silver electroceutical technology to treat sarcopenia.

While the world is rapidly transforming into a superaging society, pharmaceutical approaches to treat sarcopenia have hitherto not been successful due to their insufficient efficacy and failure to specifically target skeletal muscle cells (skMCs). Although electrical stimulation (ES) is emerging as an alternative intervention, its efficacy toward treating sarcopenia remains unexplored. In this study, we demonstrate a silver electroceutical technology with the potential to treat sarcopenia. First, we developed a high-throughput ES screening platform that can simultaneously stimulate 15 independent conditions, while utilizing only a small number of human-derived primary aged/young skMCs (hAskMC/hYskMC). The in vitro screening showed that specific ES conditions induced hypertrophy and rejuvenation in hAskMCs, and the optimal ES frequency in hAskMCs was different from that in hYskMCs. When applied to aged mice in vivo, specific ES conditions improved the prevalence and thickness of Type IIA fibers, along with biomechanical attributes, toward a younger skMC phenotype. This study is expected to pave the way toward an electroceutical treatment for sarcopenia with minimal side effects and help realize personalized bioelectronic medicine.

Fully Automated Continuous Centrifugal Microfluidics Isolates Natural Killer Cells with High Performance and Minimal Stress.

Natural killer (NK) cells are a part of the innate immune system, providing the first line of defense against cancer cells and pathogens at an early stage. Hence, they are attracting attention as a valuable resource for allogeneic cell immunotherapy. However, NK cells exist with limited proportion in blood, and obtaining sufficient clinical-grade NK cells with highly viable and minimal stress is critical for successful immune cell therapy. Conventional purification methods via immunoaffinity or density gradient centrifugation had several limitations in yield, purity, and cellular stress, which might cause an increased risk for graft versus host disease and reduced efficacy due to NK cell malfunction, exhaustion, and apoptosis. Moreover, reducing the variations of isolation performance caused by the manual process is another unmet need for uniform quality of the living drug. Here, an automated system using an NK disc (NKD) based on continuous centrifugal microfluidics (CCM) technology was developed to isolate NK cells from whole blood with high yield, purity, reproducibility, and low stress. The CCM technology, which operates fluidic manipulation under disc rotation, enabled precise extraction of the ultra-thin target fluid layer generated by blood centrifugation. Compared to the conventional manual method, the CCM-NKD isolated NK cells with higher yield (recovery rate) and purity, while maintaining better reproducibility. Furthermore, since the CCM-NKD maintained substantially milder centrifugation conditions (120 ×g for 10 min) compared to the conventional approach (1200 ×g for 20 min), it showed reduced cellular stress and increased antioxidant capacity in the isolated NK cells. Based on the results, the CCM-NKD is expected to be a useful tool to provide highly intact and viable cell weapons for successful immune cell therapy.

Cell Seeding Technology for Microarray-Based Quantitative Human Primary Skeletal Muscle Cell Analysis.

Pipetting techniques play a crucial role in obtaining reproducible and reliable results, especially when seeding cells on small target areas, such as on microarrays, biochips or microfabricated cell culture systems. For very rare cells, such as human primary skeletal muscle cells (skMCs), manual (freehand) cell seeding techniques invariably result in nonuniform cell spreading and heterogeneous cell densities, giving rise to undesirable variations in myogenesis and differentiation. To prevent such technique-dependent variation, we have designed and fabricated a simple, low-cost pipet guidance device (PGD), and holder that works with hand-held pipettes. This work validates the accuracy and reproducibility of the PGD platform and compares its effectiveness with manual and robotic seeding techniques. The PGD system ensures reproducibility of cell seeding, comparable to that of more expensive robotic dispensing systems, resulting in a high degree of cell uniformity and homogeneous cell densities, while also enabling cell community studies. As compared to freehand pipetting, PGD-assisted seeding of C2C12 mouse myoblasts showed 5.3 times more myotube formation and likewise myotubes derived from PGD-seeded human primary skMCs were 3.6 times thicker and 2.2 times longer. These results show that this novel, yet simple PGD-assisted pipetting technique provides precise cell seeding on small targets, ensuring reproducible and reliable high-throughput cell assays.

An Ultrasoft and Flexible PDMS-Based Balloon-Type Implantable Device for Controlled Drug Delivery.

Non-biodegradable implants have undergone extensive investigation as drug delivery devices to enable advanced healthcare toward personalized medicine. However, fibroblast encapsulation is one of the major challenges in all non-biodegradable implants, besides other challenges such as high initial burst, risk of membrane rupture, high onset time, non-conformal contact with tissues, and tissue damage. To tackle such challenges, we propose a novel ultrasoft and flexible balloon-type drug delivery device for unidirectional and long-term controlled release. The ultrasoft balloon-type device (USBD) was fabricated by using selective bonding between 2 polydimethylsiloxane (PDMS) membranes and injecting a fluid into the non-bonded area between them. The balloon acted as a reservoir containing a liquid drug, and at the same time, the membrane of the balloon itself acted as the pathway for release based on diffusion. The release was modulated by tuning the thickness and composition of the PDMS membrane. Regardless of the thickness and composition, all devices exhibited zero-order release behavior. The longest zero-order release and nearly zero-order release were achieved for 30 days and 58 days at a release rate of 1.16 µg/day and 1.68 µg/day, respectively. In vivo evaluation was performed for 35 days in living rats, where the USBD maintained zero-order and nearly zero-order release for 28 days and 35 days, respectively. Thanks to the employment of ultrasoft and flexible membranes and device design, the USBD could achieve minimal tissue damage and foreign body responses. It is expected that the proposed device may provide a novel approach for long-term drug delivery with new therapeutic modalities.

Electroceutical approach ameliorates intracellular PMP22 aggregation and promotes pro-myelinating pathways in a CMT1A in vitro model.

Charcot-Marie-Tooth disease subtype 1A (CMT1A) is one of the most prevalent demyelinating peripheral neuropathies worldwide, caused by duplication of the peripheral myelin protein 22 (PMP22) gene, which is expressed primarily in Schwann cells (SCs). PMP22 overexpression in SCs leads to intracellular aggregation of the protein, which eventually results in demyelination. Unfortunately, previous biochemical approaches have not resulted in an approved treatment for CMT1A disease, compelling the pursuit for a biophysical approach such as electrical stimulation (ES). However, the effects of ES on CMT1A SCs have remained unexplored. In this study, we established PMP22-overexpressed Schwannoma cells as a CMT1A in vitro model, and investigated the biomolecular changes upon applying ES via a custom-made high-throughput ES platform, screening for the condition that delivers optimal therapeutic effects. While PMP22-overexpressed Schwannoma exhibited intracellular PMP22 aggregation, ES at 20 Hz for 1 h improved this phenomenon, bringing PMP22 distribution closer to healthy condition. ES at this condition also enhanced the expression of the genes encoding myelin basic protein (MBP) and myelin-associated glycoprotein (MAG), which are essential for assembling myelin sheath. Furthermore, ES altered the gene expression for myelination-regulating transcription factors Krox-20, Oct-6, c-Jun and Sox10, inducing pro-myelinating effects in PMP22-overexpressed Schwannoma. While electroceuticals has previously been applied in the peripheral nervous system towards acquired peripheral neuropathies such as pain and nerve injury, this study demonstrates its effectiveness towards ameliorating biomolecular abnormalities in an in vitro model of CMT1A, an inherited peripheral neuropathy. These findings will facilitate the clinical translation of an electroceutical treatment for CMT1A.

An electroceutical approach enhances myelination via upregulation of lipid biosynthesis in the dorsal root ganglion.

As the myelin sheath is crucial for neuronal saltatory conduction, loss of myelin in the peripheral nervous system (PNS) leads to demyelinating neuropathies causing muscular atrophy, numbness, foot deformities and paralysis. Unfortunately, few interventions are available for such neuropathies, because previous pharmaceuticals have shown severe side effects and failed in clinical trials. Therefore, exploring new strategies to enhance PNS myelination is critical to provide solution for such intractable diseases. This study aimed to investigate the effectiveness of electrical stimulation (ES) to enhance myelination in the mouse dorsal root ganglion (DRG)-anex vivomodel of the PNS. Mouse embryonic DRGs were extracted at E13 and seeded onto Matrigel-coated surfaces. After sufficient growth and differentiation, screening was carried out by applying ES in the 1-100 Hz range at the beginning of the myelination process. DRG myelination was evaluated via immunostaining at the intermediate (19 daysin vitro(DIV)) and mature (30 DIV) stages. Further biochemical analyses were carried out by utilizing ribonucleic acid sequencing, quantitative polymerase chain reaction and biochemical assays at both intermediate and mature myelination stages. Imaging of DRG myelin lipids was carried out via time-of-flight secondary ion mass spectrometry (ToF-SIMS). With screening ES conditions, optimal condition was identified at 20 Hz, which enhanced the percentage of myelinated neurons and average myelin length not only at intermediate (129% and 61%) but also at mature (72% and 17%) myelination stages. Further biochemical analyses elucidated that ES promoted lipid biosynthesis in the DRG. ToF-SIMS imaging showed higher abundance of the structural lipids, cholesterol and sphingomyelin, in the myelin membrane. Therefore, promotion of lipid biosynthesis and higher abundance of myelin lipids led to ES-mediated myelination enhancement. Given that myelin lipid deficiency is culpable for most demyelinating PNS neuropathies, the results might pave a new way to treat such diseases via electroceuticals.

Implantable Electroceutical Approach Improves Myelination by Restoring Membrane Integrity in a Mouse Model of Peripheral Demyelinating Neuropathy.

Although many efforts are undertaken to treat peripheral demyelinating neuropathies based on biochemical interventions, unfortunately, there is no approved treatment yet. Furthermore, previous studies have not shown improvement of the myelin membrane at the biomolecular level. Here, an electroceutical treatment is introduced as a biophysical intervention to treat Charcot-Marie-Tooth (CMT) disease-the most prevalent peripheral demyelinating neuropathy worldwide-using a mouse model. The specific electrical stimulation (ES) condition (50 mV mm-1 , 20 Hz, 1 h) for optimal myelination is found via an in vitro ES screening system, and its promyelinating effect is validated with ex vivo dorsal root ganglion model. Biomolecular investigation via time-of-flight secondary ion mass spectrometry shows that ES ameliorates distribution abnormalities of peripheral myelin protein 22 and cholesterol in the myelin membrane, revealing the restoration of myelin membrane integrity. ES intervention in vivo via flexible implantable electrodes shows not only gradual rehabilitation of mouse behavioral phenotypes (balance and endurance), but also restored myelin thickness, compactness, and membrane integrity. This study demonstrates, for the first time, that an electroceutical approach with the optimal ES condition has the potential to treat CMT disease and restore impaired myelin membrane integrity, shifting the paradigm toward practical interventions for peripheral demyelinating neuropathies.

A fully automated primary neuron purification system using continuous centrifugal microfluidics.

Progress in neurological research has experienced bottlenecks owing to the limited availability of purified primary neurons. Since neuronal cells are non-proliferative, it is necessary to obtain purified neurons from animal models or human patients for experimental work. However, currently available methods for purifying primary neurons are time-consuming (taking approximately 1 week), and suffer from insufficient viability and purity. Here, we report a method for rapid enrichment of neurons from the mouse embryonic dorsal root ganglion (DRG), using a fully-automated continuous centrifugal microfluidics (CCM) based neuron purification disc (NPD). Non-neuronal cells were removed via negative depletion by combining density gradient centrifugation and immunomagnetic separation. The CCM-NPD platform enables effective isolation of intact neurons within 13 min, which is approximately 800 times faster than the conventional chemical purification method. Furthermore, the neurons purified using the CCM-NPD platform showed better neurite growth, along with higher viability (93.5%) and purity (97.0%) after 1 week of culture, compared to the chemical purification method. Therefore, the proposed automated and rapid system yields purified DRG neurons with high viability and purity, while avoiding the use of harsh chemicals. We believe this system will significantly mitigate the shortage of purified primary neurons and advance neurological research.