X-ray photoelectron and scanning Auger electron spectroscopy study of electrodeposited ZnCr coatings on steel.

Zn-Cr alloyed coatings electrochemically deposited are of high interest for leading steel manufacturing companies because of their novel properties and high corrosion resistance compared with conventional Zn coatings on steel. For tuning and optimizing the properties of the electrodeposited Zn-Cr coatings, a broad range of the deposition conditions must be studied. For this reason, two different types of material were investigated in this study, one with a low electrolyte temperature and one with an elevated electrolyte pH, compared with the standard values. Because different corrosion performance and delamination behaviour of the layers were observed for the two types, advanced surface analysis was conducted to understand the origin of this behaviour and to discover differences in the formation of the coatings. The topmost surface, the shallow subsurface region, and the whole bulk down to the coating-steel interface surface were analysed in detail by X-ray photoelectron spectroscopy (XPS) and high-resolution scanning Auger electron spectroscopy to determine the elemental and the chemical composition. For better understanding of the resulting layer structure, multiple reference samples and materials were measured and their Auger and XPS spectra were fitted to the experimental data. The results showed that one coating type is composed of metallic Zn and Cr, with oxide residing only on the surface and interface, whereas the other type contains significant amounts of Zn and Cr oxides throughout the whole coating thickness.

Nanoscale analysis of surface oxides on ZnMgAl hot-dip-coated steel sheets.

In this work, the first few nanometres of the surface of ZnMgAl hot-dip-galvanised steel sheets were analysed by scanning Auger electron spectroscopy, angle-resolved X-ray photoelectron spectroscopy and atomic force microscopy. Although the ZnMgAl coating itself is exhibiting a complex micro-structure composed of several different phases, it is shown that the topmost surface is covered by a smooth, homogeneous oxide layer consisting of a mixture of magnesium oxide and aluminium oxide, exhibiting a higher amount of magnesium than aluminium and a total film thickness of 4.5 to 5 nm. Especially by the combined analytical approach of surface-sensitive methods, it is directly demonstrated for the first time that within surface imprints--created by industrial skin rolling of the steel sheet which ensures a smooth surface appearance as well as reduced yield-point phenomenon--the original, smooth oxide layer is partly removed and that a layer of native oxides, exactly corresponding to the chemical structure of the underlying metal phases, is formed.

Laser microstructuring of photomodified fluorinated ethylene propylene surface for confined growth of Chinese hamster ovary cells and single cell isolation.

We present a method for laser lithography of cell-adhesive arrays on a fluoropolymer surface. The method is based on 172 nm excimer-lamp photomodification in ammonia atmosphere followed by microstructuring by laser ablation. The improved wettability of the polymer is caused by new chemical groups on the surface after the UV treatment that we proved by Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy analyses. The cell adhesion properties of micropatterned structures were tested by cultivation of mammalian cells. We show that single elongated cells can grow confined to lines with sharply defined boundaries of the cell-covered areas. In preliminary experiments, we also demonstrate that the described technique allows the production of single-cell arrays with variable cell shape.

Advantage of monitoring skin vibration as an index of arteriovenous fistular blood flow.

Monitoring of the skin vibration is disturbed little by environmental noise. Therefore, the skin vibration is more relevant than bruit on the skin by means of monitoring the fistular blood flow. Frequency analysis of the skin vibration generated by an internal arteriovenous fistula indicated two peaks of power spectral density (PSD), one in the frequency range of 4-10 Hz and the other from 100-300 Hz. The analysis of the skin vibration generated by an external fistula, however, showed only one peak in the range of 4-10 Hz and a moderate flat PSD level in the range of 100-300 Hz. The PSD level in the range of 100-300 Hz decreased dramatically or disappeared when the fistular blood flow diminshed or ceased. Therefore, the optimal frequency for monitoring skin vibration may be the range of 100-300 Hz.

Carbapenem and penem antibiotics. VI. Synthesis and antibacterial activity of 2-heteroaromatic-thiomethyl and 2-carbamoyloxymethyl 1-methylcarbapenems.

The synthesis and antibacterial activity of the 1-methylcarbapenems, 2-heteroaromatic-thiomethyl and 2-carbamoyloxymethyl derivatives having a 6-[(R)-1-hydroxyethyl] side chain, are described. The introduction of a methyl substituent at the C-1 position was accomplished by a newly developed procedure using crotyl halides and zinc dust. The 2-hydroxymethyl carbapenems as key intermediates allowed an easy entry into the preparation of title carbapenems.

Novel adenosine A1 receptor antagonists. Synthesis and structure-activity relationships of a novel series of 3-(2-cyclohexenyl-3-oxo-2,3-dihydropyridazin-6-yl)-2-phenylpyrazolo[1,5 -a]pyridines.

A novel series of 3-(2-cyclohexenyl-3-oxo-2,3-dihydropyridazin-6-yl)-2-phenylpyrazol o[1,5-a]pyridines was synthesized and evaluated for in vitro adenosine A1 and A2A receptor binding activities. Most of the cyclohexenyl derivatives (7a-e, 8a-s) were found to be potent adenosine A1 receptor antagonists. In a series of analogues of FR166124 (3a), alcohol 7c, nitrile 7e and amide derivatives (7d, 8c, 8r) were found to be more potent A1 antagonists with higher A2A/A1 selectivity than FR166124. Amongst them, 8r showed considerable water solubility (33.3 mg/mL), but lower than that of the sodium salt of FR166124 (> 200 mg/mL). Additionally, FR166124 had strong diuretic activity by both p.o. and iv administration in rats (minimum effective dose=0.1 and 0.032 mg/kg, respectively).

Design, synthesis and biological evaluation of a novel series of potent, orally active adenosine A1 receptor antagonists with high blood-brain barrier permeability.

A novel series of 3-(2-substituted-3-oxo-2,3-dihydropyridazin-6-yl)-2-phenylpyrazolo[1,5-a]pyridines (5-38) were synthesized and evaluated for their in vitro adenosine A1 and A(2A) receptor binding activities, and in vitro metabolism by rat liver in order to search for orally active compounds. Most of the test compounds were potent adenosine A1 receptor antagonists with high A1 selectivity and the A1 affinity and A1 selectivity of carbonyl derivatives (5-11) was particularly high. In particular, compound 7 was an extremely potent and selective adenosine A1 antagonist with high A1 selectivity (Ki=0.026 nM, A(2A)/A1=5400). In terms of metabolic stability, 2-oxopropyl (5), 2-hydroxypropyl (12), N-methylacetamide (16), 2-(piperidin-1-yl)ethyl (28) and 1-methylpiperidin-4-yl (32, FR194921) were the most stable compounds in this series of analogues. Further in vivo evaluation indicated that compounds 5, 13, 17, 28 and 32 were detected in both plasma and brain after oral administration in rats. In particular, 32 displayed good plasma and brain concentrations (dose: 32 mg/kg (n=3); after 30 min, plasma conc.=3390+/-651nM, brain conc.=3670+/-496nM; after 60min, plasma conc.=1580+/-348nM, brain conc.=2143+/-434nM), and a good brain/plasma ratio (1.11+/-0.060 (30min), 1.39+/-0.172 (60min)). As a result, we could show that 32 is a good candidate for an orally active adenosine A1 receptor antagonist with high blood-brain barrier permeability and good bioavailability (Ki=6.6nM, A(2A)/A1=820, BA=60.6+/-4.9% (32 mg/kg)).

Carbapenem and penem antibiotics. VII. Synthesis and antibacterial activity of 1 beta-methyl-2-(quaternary heteroaromatic-thiomethyl) carbapenems.

The synthesis and antibacterial activity of a series of 1 beta-methylcarbapenems having quaternary heteroaromatic-thiomethyl groups at the C-2 position are described. Both 2-hydroxymethyl and 2-chloromethyl carbapenems (1 and 7) respectively served as the common key intermediates for the preparation of these compounds. Of these, the 4-pyridiniothiomethyl derivatives exhibited the best antibacterial properties and turned out to possess high in vivo efficacy as well.

Discovery of FR166124, a novel water-soluble pyrazolo-[1,5-a]pyridine adenosine A1 receptor antagonist.

Novel 3-(2-cycloalkyl and cycloalkenyl-3-oxo-2,3-dihydropyridazin-6-yl)-2-phenylpyrazo lo [1,5-a]-pyridines were synthesized and evaluated for their adenosine A1 receptor binding activities. In this series, FR166124 (3) was found to be the most potent and selective adenosine A1 receptor antagonist, and the double bond of the cyclohexenyl acetic acid group was essential for selectivity of A1 receptor binding. Furthermore, the solubility in water of the sodium salt of FR 166124 was high.