RESUMEN
Interleukin-1 receptor-associated kinase 4 (IRAK4) is a critical molecule in Toll-like receptor/interleukin-1 receptor signaling and an attractive therapeutic target for a wide range of inflammatory and autoimmune diseases as well as cancers. In our search for novel IRAK4 inhibitors, we conducted structural modification of a thiazolecarboxamide derivative 1, a lead compound derived from high-throughput screening hits, to elucidate structure-activity relationship and improve drug metabolism and pharmacokinetic (DMPK) properties. First, conversion of the thiazole ring of 1 to an oxazole ring along with introduction of a methyl group at the 2-position of the pyridine ring aimed at reducing cytochrome P450 (CYP) inhibition were conducted to afford 16. Next, modification of the alkyl substituent at the 1-position of the pyrazole ring of 16 aimed at improving CYP1A2 induction properties revealed that branched alkyl and analogous substituents such as isobutyl (18) and (oxolan-3-yl)methyl (21), as well as six-membered saturated heterocyclic groups such as oxan-4-yl (2), piperidin-4-yl (24, 25), and dioxothian-4-y (26), are effective for reducing induction potential. Representative compound AS2444697 (2) exhibited potent IRAK4 inhibitory activity with an IC50 value of 20 nM and favorable DMPK properties such as low risk of drug-drug interactions mediated by CYPs as well as excellent metabolic stability and oral bioavailability.
Asunto(s)
Citocromo P-450 CYP1A2 , Quinasas Asociadas a Receptores de Interleucina-1 , Anticonvulsivantes/farmacología , Sistema Enzimático del Citocromo P-450/metabolismo , Oxazoles , Pirazoles/farmacología , Pirazoles/química , Relación Estructura-ActividadRESUMEN
The formation of twin plane superlattices in group III-V semiconductor nanowires (NWs) is analyzed by considering two dimensional nucleation using surface and twinning energies, obtained by performing electronic structure calculations within density functional theory. The calculations for GaP, GaAs, InP, and InAs demonstrate that surface energies strongly depend on the growth conditions such as temperature and pressure during the epitaxial growth. Furthermore, the calculated twinning energies are found to be much smaller than previously estimated values by the dissociation width of edge dislocations, which lead to smaller segment lengths. We also find that the nonlinear relationship between segment length and NW diameter depending on constituent elements is due to the difference in twinning energies. These results imply that twinning formation as well as surface stability are crucial for the formation of twin plane superlattices in group III-V semiconductor NWs.
RESUMEN
Wet coating methods use organic solvents to prepare layered particles that provide controlled-release medications. However, this approach has disadvantages in that it can cause particle agglomeration, reduce pharmaceutical stability, and leave residual organic solvents. We used a dry coating method to overcome these issues. Fine particles (less than 50 µm in diameter) of controlled-release theophylline were created using theophylline (TP; model drug), polyethylene glycol 20,000 (PEG; drug fixative), hydrogenated castor oil (HCO; controlled-release material), hydrogenated rapeseed oil (HRSO; controlled-release material), and cornstarch (CS; core particle). An ultrahigh-speed mixer was employed to mix TP and CS for 5 min at 28,000 rpm. Subsequent addition of PEG produced single-core particles with a drug reservoir coating. Addition of HCO and HRSO to these particles produced a controlled-release layer on their surface, resulting in less than 10% TP dissolution after 8 h. We successfully demonstrated that this dry coating method could be used to coat 16-µm CS particles with a drug reservoir layer and a controlled-release layer, producing multi-layer coated single-core particles that were less than 50 µm in diameter. These can be used to prepare controlled-release tablets, capsules, and orally disintegrating tablets.
Asunto(s)
Preparaciones de Acción Retardada/química , Cápsulas/química , Aceite de Ricino/química , Excipientes/química , Ácidos Grasos Monoinsaturados/química , Tamaño de la Partícula , Polietilenglicoles/química , Aceite de Brassica napus , Solubilidad , Solventes/química , Almidón/química , Comprimidos/química , Tecnología Farmacéutica/métodos , Teofilina/químicaRESUMEN
BACKGROUND: Previous studies have reported a relationship between large earthquakes and acute coronary events, but have yielded conflicting results. On March 11, 2011, a massive magnitude 9.0 earthquake hit the northeastern coast of Japan and generated repeated aftershocks. The aim of this study is to clarify the influence of this earthquake on the risk of acute myocardial infarction (AMI) including sudden cardiac death based on the data from a population-based analysis. METHODS: The study subjects were residents in the northeast of Iwate prefecture, Japan. Cases corresponding to the definition of AMI according to the criteria of the World Health Organization MONICA project were registered from 4 weeks before to 8 weeks after the disaster and in the corresponding periods in 2009 and 2010. RESULTS: The relative risk of AMI was 2.03 (95% CI 1.55-2.66) for the 4-week period after the disaster compared with the corresponding periods in the preceding years. The number of events peaked within the first week after the earthquake decreased to levels seen in the preceding years and then increased again after high-magnitude aftershocks. The incidence of AMI was positively correlated with the seismic scale of the earthquake (r = 0.75, P < .01). CONCLUSIONS: This population-based study suggests that the increase in AMI events after a major earthquake varies depending on the seismic scale of the initial shock and each aftershock.
Asunto(s)
Desastres , Terremotos , Infarto del Miocardio/epidemiología , Anciano , Muerte Súbita Cardíaca/epidemiología , Femenino , Humanos , Incidencia , Japón/epidemiología , MasculinoRESUMEN
It is demonstrated, using tandem mass spectrometry and ion trap, that preadsorption of a H2O molecule on the gold dimer cation, Au2(+), enhances adsorption of CO and O2 molecules, which is otherwise inert toward these molecules. The rate of adsorption of CO on Au2(H2O)(+) was found to be higher by 2 orders of magnitude relative to bare Au2(+). The enhancement of the CO adsorption rate is due to the presence of a reaction channel, which cleaves the Au-Au bond, leading to the formation of Au(H2O)(CO)(+). Such an observation can be attributed to weakening of the Au-Au bond upon adsorption of a water molecule. Further, it was also observed that preadsorption of H2O leads to dramatic enhancement of O2 adsorption on the Au2(+) ion, which can be attributed to the changes in the electron density following water adsorption.
RESUMEN
A new nanoporous amorphous carbon (NAC) structure that achieves both ultrahigh strength and high electrical conductivity, which are usually incompatible in porous materials is reported. By using modified spark plasma sintering, three amorphous carbon phases with different atomic bonding configurations are created. The composite consisted of an amorphous sp2-carbon matrix mixed with amorphous sp3-carbon and amorphous graphitic motif. NAC structure has an isotropic electrical conductivity of up to 12 000 S m-1, Young's modulus of up to ≈5 GPa, and Vickers hardness of over 900 MPa. These properties are superior to those of existing conductive nanoporous materials. Direct investigation of the multiscale structure of this material through transmission electron microscopy, electron energy loss spectroscopy, and machine learning-based electron tomography revealed that the origin of the remarkable material properties is the well-organized sp2/sp3 amorphous carbon phases with a core-shell-like architecture, where the sp3-rich carbon forms a resilient core surrounded by a conductive sp2-rich layer. This research not only introduces novel materials with exceptional properties but also opens new opportunities for exploring amorphous structures and designing high-performance materials.
RESUMEN
We present theoretical investigations that clarify elemental nitridation processes of corundum Al2O3(0001) and (1102) surfaces. The calculations within the density functional theory framework reveal that the structures with substitutional N atoms beneath the surface are stabilized under nitridation conditions. We also find that the desorption of O atoms at the topmost layer induces outward diffusion of O atoms as well as inward diffusion of N atoms, leading to the transformation into AlN films. The kinetic Monte Carlo simulations in conjunction with density functional theory results indeed observe a dependence of these chemical and structural changes on temperature and pressure.
RESUMEN
The band alignments of twin-plane superlattices in semiconductor nanowires are systematically investigated on the basis of density functional calculations. Our calculations demonstrate that for nanowires with small diameters the quantum-confinement effect is prominent within wurtzite structure regions and the energy gap in wurtzite-structured nanowires is remarkably larger than that including zinc-blende structure. This results in the straddling band alignment, in which both electrons and holes are confined in zinc-blende structure region. The analysis using a simple tight-binding methods also clarifies that the straddling band alignments can be realized when the diameters of nanowires are less than 4-8 nm, leading to full control of band alignments by varying the nanowire diameter. Our results provide the ability of band-alignment tuning and open new possibilities for band engineering.
Asunto(s)
Modelos Químicos , Nanoestructuras/química , Nanoestructuras/ultraestructura , Semiconductores , Simulación por Computador , Diseño Asistido por Computadora , Conductividad Eléctrica , Diseño de Equipo , Análisis de Falla de Equipo , Tamaño de la PartículaRESUMEN
A yeast with the xylose isomerase (XI) pathway was constructed by the multicopy integration of XI overexpression cassettes into the genome of the Saccharomyces cerevisiae MT8-1 strain. The resulting yeast strain successfully produced ethanol from both xylose as the sole carbon source and a mixed sugar, consisting of xylose and glucose, without any adaptation procedure. Ethanol yields in the fermentation from xylose and mixed sugar were 61.9% and 62.2% of the theoretical carbon recovery, respectively. Knockout of GRE3, a gene encoding nonspecific aldose reductase, of the host yeast strain improved the fermentation profile. Not only specific ethanol production rates but also xylose consumption rates was improved more than twice that of xylose-metabolizing yeast with the XI pathway using GRE3 active yeast as the host strain. In addition, it was demonstrated that xylitol in the medium exhibits a concentration-dependent inhibition effect on the ethanol production from xylose with the yeast harboring the XI-based xylose metabolic pathway. From our findings, the combination of XI-pathway integration and GRE3 knockout could be result in a consolidated xylose assimilation pathway and increased ethanol productivity.
Asunto(s)
Isomerasas Aldosa-Cetosa/genética , Isomerasas Aldosa-Cetosa/metabolismo , Neocallimastigales/genética , Saccharomyces cerevisiae/enzimología , Saccharomyces cerevisiae/genética , Xilosa/metabolismo , Aldehído Reductasa/genética , Metabolismo Energético/genética , Etanol/aislamiento & purificación , Etanol/metabolismo , Fermentación/efectos de los fármacos , Proteínas Fúngicas/química , Proteínas Fúngicas/genética , Proteínas Fúngicas/metabolismo , Amplificación de Genes , Expresión Génica , Ingeniería Genética , Glucosa/metabolismo , Lignina/metabolismo , Vía de Pentosa Fosfato/genética , Saccharomyces cerevisiae/metabolismo , Especificidad por Sustrato , Transformación Genética , Xilitol/farmacologíaRESUMEN
Spin-spiral structures in a free-standing Fe(110) monolayer are determined by the first-principles film full-potential linearized augmented plane wave method with intra-atomic noncollinear magnetism. The results obtained predict that the spin-spiral structures are energetically favourable over the collinear ferromagnetic state. The interatomic exchange parameters, which are evaluated from the formation energy of the spin-spiral structures, indicate that a competition between the nearest-neighbour ferromagnetic interaction and the long-distant antiferromagnetic interactions leads to the stabilization of the spin-spiral structures. In addition, the spin-orbit coupling is found to play an important role in determining the magnetic ground state.
RESUMEN
The indoor workplace environment was evaluated for exposure to radon and its decay products at two Universities in two metropolises of Japan. The mean radon concentrations in Nagoya University (NU) and Hokkaido University (HU) were 16.7 Bq m(-3) and 18.0 Bq m(-3), respectively. Activity median aerodynamic diameter (AMAD) of particles at NU ranged from 172 nm approximately 205 nm and at HU from 186 nm approximately 300 nm. Estimated effective doses for five usual sites of NU by ICRP approach was 0.15 mSvy(-1) approximately 0.76 mSvy(-1) and by UNSCEAR approach was 0.05 mSvy(-1) approximately 0.24 mSvy(-1). The effective dose for the same of HU by ICRP 66 approach was 0.16 mSvy(-1) approximately 0.79 mSvy(-1) and by UNSCEAR 2000 approach was 0.05 mSv y(-1) to 0.26 mSv y(-1). The two approaches differs on an average by a factor 2.3- approximately 4.7. The AMAD of obtained particle size distribution at NU has an average total deposition of 23% in human respiratory tract and 20% at HU.
Asunto(s)
Dosis de Radiación , Monitoreo de Radiación/métodos , Radón/análisis , Contaminantes Radiactivos del Aire/análisis , Contaminación del Aire Interior/análisis , Humanos , Japón/epidemiología , Monitoreo de Radiación/instrumentación , Lugar de TrabajoRESUMEN
We review the surface stability and growth kinetics of III-V and III-nitride semiconductors. The theoretical approach used in these studies is based on ab initio calculations and includes gas-phase free energy. With this method, we can investigate the influence of growth conditions, such as partial pressure and temperature, on the surface stability and growth kinetics. First, we examine the feasibility of this approach by comparing calculated surface phase diagrams of GaAs(001) with experimental results. In addition, the Ga diffusion length on GaAs(001) during molecular beam epitaxy is discussed. Next, this approach is systematically applied to the reconstruction, adsorption and incorporation on various nitride semiconductor surfaces. The calculated results for nitride semiconductor surface reconstructions with polar, nonpolar, and semipolar orientations suggest that adlayer reconstructions generally appear on the polar and the semipolar surfaces. However, the stable ideal surface without adsorption is found on the nonpolar surfaces because the ideal surface satisfies the electron counting rule. Finally, the stability of hydrogen and the incorporation mechanisms of Mg and C during metalorganic vapor phase epitaxy are discussed.
RESUMEN
Four kinds of transporters, HXT1 and HXY7 from Saccharomyces cerevisiae, and GXF1 and GXS1 from Candida intermedia, were overexpressed in xylose-metabolizing S. cerevisiae harboring a xyloseisomerase-based pathway. Overexpression of transporter enhanced sugar consumption and ethanol production, and GXF1 was efficient for ethanol fermentation from both glucose and xylose.
Asunto(s)
Isomerasas Aldosa-Cetosa/metabolismo , Etanol/metabolismo , Fermentación , Proteínas de Transporte de Monosacáridos/metabolismo , Saccharomyces cerevisiae/metabolismo , Xilosa/metabolismo , Candida/genética , Candida/metabolismo , Proteínas Fúngicas/genética , Proteínas Fúngicas/metabolismo , Glucosa/metabolismo , Proteínas Facilitadoras del Transporte de la Glucosa/genética , Proteínas Facilitadoras del Transporte de la Glucosa/metabolismo , Proteínas de Transporte de Monosacáridos/genética , Saccharomyces cerevisiae/genética , Proteínas de Saccharomyces cerevisiae/genética , Proteínas de Saccharomyces cerevisiae/metabolismoRESUMEN
Small gold cluster cations, Au(n)(+), adsorb N(2) molecules effectively under multiple collision conditions. The saturation number for N(2) adsorption on a gold cluster cation depends on the number of dangling gold atoms and the triangular apexes. The saturation numbers were interpreted to arrive at the geometrical structures of gold cluster cations. The gold cluster cations of sizes 3 and 6 have single isomers, whilst cluster cations with 4, 5, and 7 atoms have two isomers. For the gold cluster cation with six atoms, a higher-energy and lower-symmetry structure was observed. The gold cluster cations with eight or more atoms do not adsorb N(2), which can be attributed to a two-dimensional to three-dimensional structural transition at n = 8.
RESUMEN
The effect of exercise on the increase of exhaled CO in smokers compared to non-smokers has not been clarified yet. In this study we compared the dynamics of exhaled CO before, during and after exercise between smokers and non-smokers. A group of 8 smokers and a group of 8 non-smokers underwent a bicycle exercise in a ramp fashion to near maximum intensity. Ventilation and gas exchange, and CO exhalation were continuously measured every 30-s before, during and after the exercise. The fraction of CO (F (CO)) in the exhaled air decreased gradually, but the total amount of exhaled CO (V(CO)) increased in a linear manner during the ramp exercise, and F (CO) and returned to the pre-exercise level within several minutes after exercise in all subjects. A linear relationship was observed between V (O(2)) and V (CO) and between V (E) and V (CO) in both the whole period of measurement and during the ramp exercise period in all subjects. However, the at V (CO) 0 W, the peak V (CO) and the slope coefficients in the regression equation between V (CO) and V (O(2)) and between V (CO) and V (E) in the ramp exercise as well as the entire periods of measurement were significantly higher in smokers compared with those in non-smokers, and these were correlated with the number of cigarettes smoked per day. It was concluded that CO exhalation increases linearly with the increase of V (O(2)) and V (E) during exercise, and habitual smoking shifts these relationships upward depending on the number of cigarettes smoked daily.
Asunto(s)
Monóxido de Carbono/metabolismo , Prueba de Esfuerzo , Ejercicio Físico/fisiología , Intercambio Gaseoso Pulmonar/fisiología , Fumar/metabolismo , Adulto , Pruebas Respiratorias , Humanos , Masculino , Persona de Mediana Edad , Oxígeno/metabolismo , Ventilación Pulmonar/fisiología , Adulto JovenRESUMEN
Controlling and designing quantum magnetic properties by an external electric field is a key challenge in modern magnetic physics. Here, from first principles, the effects of an external electric field on the magnetocrystalline anisotropy (MCA) in ferromagnetic transition-metal monolayers are demonstrated which show that the MCA in an Fe(001) monolayer [but not in Co(001) and Ni(001) monolayers] can be controlled by the electric field through a change in band structure, in which small components of the p orbitals near the Fermi level, which are coupled to the d states by the electric field, play a key role. This prediction obtained opens a way to control the MCA by the electric field and invites experiments.
RESUMEN
To investigate half-metallic exchange bias interfaces, magnetic structures at ferromagnetic (FM)/antiferromagnetic (AFM) interfaces in the zinc blende transition-metal chalcogenides, and with compensated and uncompensated AFM interfaces, were determined by the full-potential linearized augmented plane-wave method. With the uncompensated AFM interface, an antiparallel alignment of the Cr and Mn moments induces an excellent half-metallicity. More striking still, in the compensated AFM interface the Cr moments in the FM layer lie perpendicular to the Mn moments in the AFM layer but the Mn moments strongly cant to induce a net moment so as to retain the half-metallicity. These findings may offer a key ingredient for exchange biased spintronic devices with 100% spin polarization, having a unidirectional anisotropy to control and manipulate spins at the nanoscale.
RESUMEN
Magnetic domain wall structures in an Fe (110) monolayer are determined by the highly precise first principles full-potential linearized augmented plane-wave method including intra-atomic noncollinear magnetism. The self-consistent results demonstrate that the magnetization changes from one orientation to the opposite (180 degrees ) orientation within an 8 A width without any abrupt rotation. This narrow domain wall is found to arise from band effects. Our results are consistent with and support domain walls having a 6 A width recently observed in spin-polarized scanning tunneling microscopy experiments.
RESUMEN
The purpose of this study was to assess the validity of an adaptive filter, the scaled Fourier linear combiner (SFLC), in the impedance cardiography (ICG). Eight healthy males underwent constant-load bicycle exercise at different intensities from unloaded to near maximal intensity. The stroke volume (SV) and cardiac output (Q) measured by ICG at each condition were compared with those by the CO2 rebreathing method. We found that the noises were greatly reduced in the impedance waveform and that the inflection points, so-called the B- and X-points, were clearly detected even during strenuous exercise using the SFLC. Although a high correlation was observed between Qs measured by the two methods, the mean values of Qs in each method differed significantly and the regression line also differed significantly from the identity line. Likewise, a significant correlation was observed between SVs obtained by the two methods, but a significant difference in the group mean values and a trend of the regression line were observed. These findings suggest that the use of SFLC in ICG improves the performance in eliminating the noises and in detecting the inflection points in the waveform, thereby contributing to the accurate and beat-to-beat measurements of SV and Q especially during exercise.
Asunto(s)
Cardiografía de Impedancia/instrumentación , Reproducibilidad de los Resultados , Adulto , Cardiografía de Impedancia/métodos , Electrocardiografía , Prueba de Esfuerzo , Humanos , Masculino , Estadística como AsuntoRESUMEN
In order to elucidate the beat-to-beat changes of the systolic time intervals (STI) during exercise, we proposed new techniques relating to an adaptive filter and detection algorithms for B- and X-points in the impedance cardiograph (ICG). Six male subjects underwent a ramp bicycle exercise up to maximum intensity during which an ECG, ICG and phonocardiogram (PCG) were continuously measured. Following the application of an adaptive filter, the scaled Fourier linear combiner (SFLC), to the first derivative (dZ/dt) of the base impedance (deltaZ) and PCG waveforms, the B- and X-points were automatically determined. For the B-point detection we used three criteria: the zero-crossing point (B(zero)), the 15% response point (B15%) of the negative peak of the dZ/dt (dZ/dt(min)) and a new algorithm (B(new)). The X-point was separately determined by using the ICG and PCG waveforms. It was found that the shape of the dZ/dt waveform directly affected the determination of the B- and X-points. The B-points determined using B(zero) and B15%, criteria were sometimes unstable caused by the location of a notch preceding the dZ/dt(min) compared to the B(new). The time difference between the X-points measured by the ICG and PCG was mostly within +/- 20 milliseconds but statistically significant. Although a wide variation was seen in R-R intervals, the STI were more stable. The relationships between HR and STI from rest to maximal exercise showed a gentle curvilinear relationship. It is suggested that the STI can be obtained precisely on a beat-to-beat basis by using the adaptive filter and detection algorithms for the inflection points of the ICG even during maximum exercise.