RESUMEN
This study presents the formulation and evaluation of an ABH Carbopol gel containing lorazepam (Ativan®), diphenhydramine hydrochloride (Benadryl®), and haloperidol (Haldol®) for treating chemotherapy-induced nausea and vomiting (CINV) in hospice patients. ABH PLO gel is widely used for this purpose due to its low cost and presumed efficacy. However, previous studies, including one conducted by the authors, have reported insufficient drug absorption from the ABH PLO gel. Here we hypothesized that the ABH Carbopol gel would provide superior percutaneous absorption of the drugs. ABH Carbopol gel was characterized for pH, viscosity, thermal properties, and infrared spectroscopy. The percutaneous absorption and skin retention of the gel was evaluated across porcine ear skin using Franz diffusion cells, and the drug concentrations were determined by high-performance liquid chromatography. The pH of the ABH Carbopol gel was found to be 6.80 ± 0.33, and the retention time of diphenhydramine, haloperidol, and lorazepam were 4.73, 7.11, and 18.69 minutes, respectively. The thermogram of the ABH Carbopol gel indicates the drugs were present in the dissolved state. Based on the flux data, the estimated steady-state concentration (Css) of diphenhydramine, haloperidol, and lorazepam were found to be 44.64 ng/ml, 2.58 ng/ml, and 20.1 ng/ml, respectively. These values were significantly higher than those obtained from the ABH PLO gel. In conclusion, the ABH Carbopol gel provides a promising alternative to the ABH PLO gel for treating CINV in hospice patients. Further studies are required to validate these findings in clinical settings.
Asunto(s)
Haloperidol , Absorción Cutánea , Porcinos , Animales , Lorazepam , DifenhidraminaRESUMEN
The activity of the P-glycoprotein (P-gp) transporter encoded by the ABCB1 gene confers resistance to anticancer drugs and contributes to cancer-related mortality and morbidity. Recent studies revealed the cytotoxic effects of the endogenous dipeptide carnosine. The current study aimed to investigate the role of carnosine as a potential inhibitor of P-gp activity. We used molecular docking and molecular dynamic simulations to study the possible binding and stability of carnosine-P-gp interactions compared with verapamil. In vitro assays using doxorubicin-resistant NCI/ADR-RES cells were established to test the effects of carnosine (10-300 µM) on P-gp activity by the rhodamine-123 efflux assay and its effect on cell viability and doxorubicin-induced cytotoxicity. Verapamil (10 µM) was used as a positive control. The results showed that carnosine binding depends mainly on hydrogen bonding with GLU875, GLN946, and ALA871, with a higher average Hbond than verapamil. Carnosine showed significant but weaker than verapamil-induced rhodamine-123 accumulation. Carnosine and verapamil similarly inhibited cell viability. However, verapamil showed a more significant potentiating effect on doxorubicin-induced cytotoxicity than a weaker effect of carnosine at 300 µM. These results suggest that carnosine inhibits P-gp activity and potentiates doxorubicin-induced cytotoxicity at higher concentrations. Carnosine might be a helpful lead compound in the fight against multidrug-resistant cancers.
Asunto(s)
Antineoplásicos , Carnosina , Resistencia a Múltiples Medicamentos , Carnosina/farmacología , Carnosina/metabolismo , Miembro 1 de la Subfamilia B de Casetes de Unión a ATP/metabolismo , Simulación del Acoplamiento Molecular , Resistencia a Antineoplásicos , Doxorrubicina/farmacología , Rodamina 123/farmacología , Verapamilo/farmacología , Subfamilia B de Transportador de Casetes de Unión a ATP/metabolismo , Antineoplásicos/farmacologíaRESUMEN
Being a candidate of BCS class II, dolutegravir (DTG), a recently approved antiretroviral drug, possesses solubility issues. The current research was aimed to improve the solubility of the DTG and thereby enhance its efficacy using the solid dispersion technique. In due course, the miscibility study of the drug was performed with different polymers, where Poloxamer 407 (P407) was found suitable to move forward. The solid dispersion of DTG and P407 was formulated using solvent evaporation technique with a 1:1 proportion of drug and polymer, where the solid-state characterization was performed using differential scanning calorimetry, Fourier transform infrared spectroscopy and X-ray diffraction. No physicochemical interaction was found between the DTG and P407 in the fabricated solid dispersion; however, crystalline state of the drug was changed to amorphous as evident from the X-ray diffractogram. A rapid release of DTG was observed from the solid dispersion (>95%), which is highly significant (p<0.05) as compared to pure drug (11.40%), physical mixture (20.07%) and marketed preparation of DTG (35.30%). The drug release from the formulated solid dispersion followed Weibull model kinetics. Finally, the rapid drug release from the solid dispersion formulation revealed increased Cmax (14.56 µg/mL) when compared to the physical mixture (4.12 µg/mL) and pure drug (3.45 µg/mL). This was further reflected by improved bioavailability of DTG (AUC: 105.99±10.07 µg/h/mL) in the experimental Wistar rats when compared to the AUC of animals administered with physical mixture (54.45±6.58 µg/h/mL) and pure drug (49.27±6.16 µg/h/mL). Therefore, it could be concluded that the dissolution profile and simultaneously the bioavailability of DTG could be enhanced by means of the solid dispersion platform using the hydrophilic polymer, P407, which could be projected towards improved efficacy of the drug in HIV/AIDS.
Asunto(s)
Fármacos Anti-VIH/administración & dosificación , Fármacos Anti-VIH/farmacocinética , Terapia Antirretroviral Altamente Activa/métodos , Infecciones por VIH/tratamiento farmacológico , Compuestos Heterocíclicos con 3 Anillos/administración & dosificación , Compuestos Heterocíclicos con 3 Anillos/farmacocinética , Oxazinas/administración & dosificación , Oxazinas/farmacocinética , Piperazinas/administración & dosificación , Piperazinas/farmacocinética , Piridonas/administración & dosificación , Piridonas/farmacocinética , Animales , Fármacos Anti-VIH/uso terapéutico , Área Bajo la Curva , Disponibilidad Biológica , Composición de Medicamentos , Liberación de Fármacos , Excipientes , Compuestos Heterocíclicos con 3 Anillos/uso terapéutico , Masculino , Oxazinas/uso terapéutico , Piperazinas/uso terapéutico , Poloxámero , Piridonas/uso terapéutico , Ratas , Ratas Wistar , Solubilidad , Difracción de Rayos XRESUMEN
Asenapine, an atypical antipsychotic agent, has been approved for the acute and maintenance treatment of schizophrenia and manic episodes of bipolar disorder. However, the extensive hepatic metabolism limits its oral bioavailability. Therefore, the objective of the current investigation was to develop sublingual film containing asenapine to enhance the therapeutic efficacy. Sublingual films containing asenapine were fabricated using polyethylene oxide and hydroxypropyl methylcellulose by solvent casting method. Design of experiment was used as a statistical tool to optimize the proportion of the film-forming polymers in order to establish the critical quality attributes of the drug formulation. The process was studied in detail by assessing risk of each step as well as parameters and material attributes to reduce the risk to a minimum. A control strategy was defined to ensure manufacture of films according to the target product profile by evaluation of intermediate quality attributes at the end of each process step. Results of optimized formulations showed rapid disintegration, adequate folding endurance, good percentage elongation, tensile strength, and viscosity. Besides, the results from the in vitro dissolution/ex vivo permeation studies showed rapid dissolution (100% in 6 min) and higher asenapine permeation (~ 80% in 90 min) through the sublingual epithelium. In vivo study indicates greater asenapine absorption (31.18 ± 5.01% of administered dose) within 5 min and was comparable with marketed formulation. In summary, the designing plan to develop asenapine formulation was successfully achieved with desired characteristics of the delivery tool for sublingual administration.
Asunto(s)
Antipsicóticos , Trastorno Bipolar , Esquizofrenia , Antipsicóticos/uso terapéutico , Trastorno Bipolar/tratamiento farmacológico , Dibenzocicloheptenos , Compuestos Heterocíclicos de 4 o más Anillos , Humanos , Esquizofrenia/tratamiento farmacológicoRESUMEN
The 3D printing is considered as an emerging digitized technology that could act as a key driving factor for the future advancement and precise manufacturing of personalized dosage forms, regenerative medicine, prosthesis and implantable medical devices. Tailoring the size, shape and drug release profile from various drug delivery systems can be beneficial for special populations such as paediatrics, pregnant women and geriatrics with unique or changing medical needs. This review summarizes various types of 3D printing technologies with advantages and limitations particularly in the area of pharmaceutical research. The applications of 3D printing in tablets, films, liquids, gastroretentive, colon, transdermal and intrauterine drug delivery systems as well as medical devices have been briefed. Due to the novelty and distinct features, 3D printing has the inherent capacity to solve many formulation and drug delivery challenges, which are frequently associated with poorly aqueous soluble drugs. Recent approval of Spritam® and publication of USFDA technical guidance on additive manufacturing related to medical devices has led to an extensive research in various field of drug delivery systems and bioengineering. The 3D printing technology could be successfully implemented from pre-clinical phase to first-in-human trials as well as on-site production of customized formulation at the point of care having excellent dose flexibility. Advent of innovative 3D printing machineries with built-in flexibility and quality with the introduction of new regulatory guidelines would rapidly integrate and revolutionize conventional pharmaceutical manufacturing sector.
Asunto(s)
Sistemas de Liberación de Medicamentos , Impresión Tridimensional , Tecnología Farmacéutica , Sistemas de Liberación de Medicamentos/instrumentación , Humanos , Impresión Tridimensional/tendencias , Tecnología Farmacéutica/tendenciasRESUMEN
Administration of almotriptan as an oral therapy is largely limited because of poor aqueous solubility and rather low bioavailability. The aim of present investigation was to formulate oral mucoadhesive film of almotriptan to improve the drug delivery and desired therapeutic effects. Placebo films (F1-F8) were prepared by varying the concentrations of Proloc 15 (7.5-15% w/v) and Eudragit RL 100/RS 100 (15-30% w/v) polymers. Physicomechanical and pharmaceutical characteristics of drug loaded films (FA1-FA4) were examined. Selected FA4 film was evaluated in vivo by assessing the pharmacokinetic profile and compared with oral therapy in rabbits. FA1-FA4 films exhibited excellent physicomechanical properties and rapid hydration. A biphasic and considerably greater drug release (p < 0.05) was observed in FA3 and FA4 films contain higher amount of hydrophilic polymer. The rate of permeation of almotriptan was found to be significantly higher in FA4 than FA3 film (p < 0.005). Fourier transform infrared spectral scan indicates no incompatibility exists between the drug and polymers used. Differential scanning calorimetry thermogram represents the evidence of almotriptan amorphization and molecular dispersion of it in the film. Scanning electron microscopy images shows that FA4 possess good morphological features and hence suitable for use in the buccal application. In vivo data demonstrated rapid and efficient absorption (p < 0.005) of almotriptan with greater AUC0-12 (>2 folds, p < 0.0001) by FA4 film as compared to oral (control). In general, the data established the potential of FA4 film to improve the therapeutic delivery of almotriptan and offers a promising option in migraine therapy.
RESUMEN
Selective targeting of anticancer drugs to the tumor site is beneficial in the pharmacotherapy of hepatocellular carcinoma (HCC). This study evaluated the prospective of galactosylated chitosan nanoparticles as a liver-specific carrier to improve the therapeutic efficacy of gemcitabine in HCC by targeting asialoglycoprotein receptors expressed on hepatocytes. Nanoparticles were formulated (G1-G5) by an ionic gelation method and evaluated for various physicochemical characteristics. Targeting efficacy of formulation G4 was evaluated in rats. Physicochemical characteristics exhibited by nanoparticles were optimal for administering and targeting gemcitabine effectively to the liver. The biphasic release behavior observed with G4 can provide higher drug concentration and extend the pharmacotherapy in the liver target site. Rapid plasma clearance of gemcitabine (70% in 30 min) from G4 was noticed in rats with HCC as compared to pure drug (p < 0.05). Higher uptake of gemcitabine predominantly by HCC (64% of administered dose; p < 0.0001) demonstrated excellent liver targeting by G4, while mitigating systemic toxicity. Morphological, biochemical, and histopathological examination as well as blood levels of the tumor marker, alpha-fetoprotein, in rats confirmed the curative effect of G4. In conclusion, this study demonstrated site-specific delivery and enhanced in vivo anti-HCC efficacy of gemcitabine by G4, which could function as promising carrier in hepatoma.
Asunto(s)
2-Acetilaminofluoreno/efectos adversos , Receptor de Asialoglicoproteína/metabolismo , Carcinoma Hepatocelular/tratamiento farmacológico , Desoxicitidina/análogos & derivados , Neoplasias Hepáticas/tratamiento farmacológico , Animales , Antimetabolitos Antineoplásicos , Carcinoma Hepatocelular/inducido químicamente , Carcinoma Hepatocelular/metabolismo , Quitosano/química , Desoxicitidina/administración & dosificación , Desoxicitidina/química , Desoxicitidina/farmacocinética , Neoplasias Hepáticas/inducido químicamente , Masculino , Nanopartículas , Ratas , Ensayos Antitumor por Modelo de Xenoinjerto , GemcitabinaRESUMEN
Preclinical Research & Development An in vitro-in vivo correlation (IVIVC) is as a predictive mathematical model that demonstrates a key role in the development, advancement, evaluation and optimization of extended release, modified release and immediate release pharmaceutical formulations. A validated IVIVC model can serve as a surrogate for bioequivalence studies and subsequently save time, effort and expenditure during pharmaceutical product development. This review discusses about different levels of correlations, general approaches to develop an IVIVC by mathematical modelling, validation, data analysis and various applications. In the current setting, the dearth of success associated with IVIVC is due to complexity of underlying scientific principles as well as the practice of fitting/matching in vivo plasma level-time data with in vitro dissolution profile. Hence, a simple, straightforward practical means to predict plasma drug levels by convolution technique and percentage drug absorbed computed from in vitro dissolution profile based on deconvolution method are illustrated. The bioavailability/bioequivalence assessment and evaluation are frequently validated by the pharmacokinetic parameters such as maximum concentration, time to reach maximum concentration, and area under the curve. The implementation of a quality by design manufacturing based on in vivo bioavailability and clinically relevant dissolution specification are recommended because corresponding design safe space will guarantee that all batches from relevant products are met with sufficient quality and bioperformance. Recently, United States Food and Drug Administration and European Medicines Agency have proposed that in silico/physiologically based pharmacokinetic modelling can be used in decision making during preclinical experiments as well as to recognize the dissolution profiles that can forecast and ensure the desired clinical performance.
Asunto(s)
Modelos Teóricos , Farmacocinética , Animales , Biofarmacia , Humanos , Preparaciones Farmacéuticas/química , Preparaciones Farmacéuticas/clasificación , Preparaciones Farmacéuticas/metabolismo , Estados Unidos , United States Food and Drug AdministrationRESUMEN
Cyclodextrins (CDs) have been widely investigated as a unique pharmaceutical excipient for past few decades and is still explored for new applications. They are highly versatile oligosaccharides which possess multifunctional characteristics, and are mainly used to improve the physicochemical stability, solubility, dissolution rate, and bioavailability of drugs. Stability constant, factors affecting complexation, techniques to enhance complexation efficiency, the preparation methods for molecular inclusion complexes and release of guest molecules are discussed in brief. In addition, different CD derivatives and their pharmacokinetics are elaborated. Further, the significance of CD complex in aqueous solubility, dissolution and bioavailability, stability, and taste masking is explained. The recent advancement of CDs in developing various drug delivery systems is enlightened. Indeed, the potential of CDs by means of inclusion complex formation have widen the applicability of these materials in various drug delivery systems including ocular, osmotic, mucoadhesive, transdermal, nasal, and targeted delivery systems. Feasibility studies have been performed on the benefit of these cyclic oligomers as nanocarriers, a strategy that can modify the drugs with improved physicochemical properties. Studies also demonstrated the feasibility of CDs to self-assemble in the form of stable nanoaggregates, which may extend the scope of CDs in drug delivery to the continually expanding list of new drug entities.
Asunto(s)
Ciclodextrinas/química , Portadores de Fármacos/química , Composición de Medicamentos/métodos , Liberación de Fármacos , Preparaciones Farmacéuticas/administración & dosificación , Animales , Disponibilidad Biológica , Química Farmacéutica , Excipientes/química , Humanos , Nanopartículas/químicaRESUMEN
Preclinical Research & Development Appropriate translation and determination of the maximum recommended starting dose in human is a vital task in new drug development and research. Allometric scaling is the most frequently used approach for dose extrapolation based on normalization of dose-to-body surface area. Misinterpretation of allometric dose conversion and safety factor application can lead to major problems in calculating maximum recommended safe starting dose in first-in-human clinical trials. Therefore, dose translation always necessitates careful consideration of body surface area, pharmacological, physiological and anatomical factors, pharmacokinetic parameters, metabolic function, receptor, and life span. The concept of estimating the first-in-human dose, interspecies scaling between species and the factors influencing the dose escalation were reviewed. The pros and cons of various approaches to determine first-in-human dose including allometric scaling, pharmacokinetically guided approach, minimal anticipated biological effect level, pharmacokinetic-pharmacodynamic modeling, similar drug approach, and microdosing were explained. The five steps to estimate maximum recommended starting dose for human studies by scaling factor were elaborated. Few examples, illustrating the application of different approaches were also demonstrated along with concerns that may be considered while applying such methods. Furthermore, typical considerations in dose administration, dosing through diet, maximum absorbable dose, blood sampling, and anesthesia in animal species were discussed. In summary, this review may serve as a concise guide for predicting human equivalent dose from animal species for researchers involved in various phases of preclinical and early clinical drug development.
RESUMEN
Niosomes suggest a versatile vesicle delivery system with possible transport of drugs via topical route for skin delivery. The aim of the present research was to optimize niosome gel formulation of acyclovir and to evaluate in both in vitro and in vivo rabbit model. Niosome formulations were formulated by coacervation phase separation technique with different ratios of nonionic surfactants, phospholipids and cholesterol using 32 factorial design. Altering the surfactant concentration has influenced the drug entrapment, but not vesicle size. At high surfactant combinations, the acyclovir release from niosomes was strongly influenced by cholesterol:lecithin ratio. Ex vivo drug permeation data indicate substantial difference in flux values and was influenced by the niosome composition. Ex vivo studies using formulation (B8) for drug deposition indicate greater amount of niosome being diffused into the skin layers and formed a depot, compared to commercial acyclovir cream (control). Two distinct dermatopharmacokinetic profiles were observed, in vivo, for niosome gel formulation (B8) and control, which were analog to the profiles observed with ex vivo deposition studies. In vivo plasma drug level suggests low systemic exposure of acyclovir (Cmax: 9.44 ± 2.27 ng/mL and 14.54 ± 3.11 ng/mL for niosome formulation and control, respectively). Comparison of kinetic data of acyclovir in the stratum corneum and plasma signifies that the niosome formulation forms a depot in the epidermis or dermis region. This study concludes that the niosome gel formulation (B8) could be a viable vesicular system for an impressive transdermal delivery of acyclovir by topical application.
Asunto(s)
Aciclovir/química , Aciclovir/farmacocinética , Liposomas/química , Enfermedades de la Piel/tratamiento farmacológico , Aciclovir/administración & dosificación , Aciclovir/sangre , Administración Cutánea , Animales , Química Farmacéutica/métodos , Colesterol/química , Portadores de Fármacos/química , Liberación de Fármacos , Estabilidad de Medicamentos , Humanos , Lecitinas/química , Límite de Detección , Nanopartículas/química , Tamaño de la Partícula , Conejos , Absorción Cutánea , Propiedades de SuperficieRESUMEN
The nose-to-brain drug-delivery system has emerged as a promising strategy to overcome the challenges associated with conventional drug administration for central nervous system disorders. This emerging field is driven by the anatomical advantages of the nasal route, enabling the direct transport of drugs from the nasal cavity to the brain, thereby circumventing the blood-brain barrier. This review highlights the significance of the anatomical features of the nasal cavity, emphasizing its high permeability and rich blood supply that facilitate rapid drug absorption and onset of action, rendering it a promising domain for neurological therapeutics. Exploring recent developments and innovations in different nanocarriers such as liposomes, polymeric nanoparticles, solid lipid nanoparticles, dendrimers, micelles, nanoemulsions, nanosuspensions, carbon nanotubes, mesoporous silica nanoparticles, and nanogels unveils their diverse functions in improving drug-delivery efficiency and targeting specificity within this system. To minimize the potential risk of nanoparticle-induced toxicity in the nasal mucosa, this article also delves into the latest advancements in the formulation strategies commonly involving surface modifications, incorporating cutting-edge materials, the adjustment of particle properties, and the development of novel formulations to improve drug stability, release kinetics, and targeting specificity. These approaches aim to enhance drug absorption while minimizing adverse effects. These strategies hold the potential to catalyze the advancement of safer and more efficient nose-to-brain drug-delivery systems, consequently revolutionizing treatments for neurological disorders. This review provides a valuable resource for researchers, clinicians, and pharmaceutical-industry professionals seeking to advance the development of effective and safe therapies for central nervous system disorders.
RESUMEN
Curcumin, an organic phenolic molecule that is extracted from the rhizomes of Curcuma longa Linn, has undergone extensive evaluation for its diverse biological activities in both animals and humans. Despite its favorable characteristics, curcumin encounters various formulation challenges and stability issues that can be effectively addressed through the application of nanotechnology. Nano-based techniques specifically focused on enhancing solubility, bioavailability, and therapeutic efficacy while mitigating toxicity, have been explored for curcumin. This review systematically presents information on the improvement of curcumin's beneficial properties when incorporated, either individually or in conjunction with other drugs, into diverse nanosystems such as liposomes, nanoemulsions, polymeric micelles, dendrimers, polymeric nanoparticles, solid-lipid nanoparticles, and nanostructured lipid carriers. Additionally, the review examines ongoing clinical trials and recently granted patents, offering a thorough overview of the dynamic landscape in curcumin delivery. Researchers are currently exploring nanocarriers with crucial features such as surface modification, substantial loading capacity, biodegradability, compatibility, and autonomous targeting specificity and selectivity. Nevertheless, the utilization of nanocarriers for curcumin delivery is still in its initial phases, with regulatory approval pending and persistent safety concerns surrounding their use.
RESUMEN
INTRODUCTION: Retinal drug delivery has witnessed significant advancements in recent years, mainly driven by the prevalence of retinal diseases and the need for more efficient and patient-friendly treatment strategies. AREAS COVERED: Advancements in nanotechnology have introduced novel drug delivery platforms to improve bioavailability and provide controlled/targeted delivery to specific retinal layers. This review highlights various treatment options for retinal diseases. Additionally, diverse strategies aimed at enhancing delivery of small molecules and antibodies to the posterior segment such as implants, polymeric nanoparticles, liposomes, niosomes, microneedles, iontophoresis and mixed micelles were emphasized. A comprehensive overview of the special technologies currently under clinical trials or already in the clinic was provided. EXPERT OPINION: Ideally, drug delivery system for treating retinal diseases should be less invasive in nature and exhibit sustained release up to several months. Though topical administration in the form of eye drops offers better patient compliance, its clinical utility is limited by nature of the drug. There is a wide range of delivery platforms available, however, it is not easy to modify any single platform to accommodate all types of drugs. Coordinated efforts between ophthalmologists and drug delivery scientists are necessary while developing therapeutic compounds, right from their inception.
Asunto(s)
Sistemas de Liberación de Medicamentos , Enfermedades de la Retina , Humanos , Enfermedades de la Retina/tratamiento farmacológico , Animales , Nanotecnología , Disponibilidad Biológica , Soluciones Oftálmicas/administración & dosificación , Administración Oftálmica , Preparaciones Farmacéuticas/administración & dosificación , Preparaciones de Acción Retardada , NanopartículasRESUMEN
Orodispersible films (ODFs) are thin, mechanically strong, and flexible polymeric films that are designed to dissolve or disintegrate rapidly in the oral cavity for local and/or systemic drug delivery. This review examines various aspects of ODFs and their potential as a drug delivery system. Recent advancements, including the detailed exploration of formulation components, such as polymers and plasticizers, are briefed. The review highlights the versatility of preparation methods, particularly the solvent-casting production process, and novel 3D printing techniques that bring inherent flexibility. Three-dimensional printing technology not only diversifies active compounds but also enables a multilayer approach, effectively segregating incompatible drugs. The integration of nanoparticles into ODF formulations marks a significant breakthrough, thus enhancing the efficiency of oral drug delivery and broadening the scope of the drugs amenable to this route. This review also sheds light on the diverse in vitro evaluation methods utilized to characterize ODFs, ongoing clinical trials, approved marketed products, and recent patents, providing a comprehensive outlook of the evolving landscape of orodispersible drug delivery. Current patient-centric approaches involve developing ODFs with patient-friendly attributes, such as improved taste masking, ease of administration, and enhanced patient compliance, along with the personalization of ODF formulations to meet individual patient needs. Investigating novel functional excipients with the potential to enhance the permeation of high-molecular-weight polar drugs, fragile proteins, and oligonucleotides is crucial for rapid progress in the advancing domain of orodispersible drug delivery.
RESUMEN
Clinical application of treprostinil in pulmonary arterial hypertension is hampered by adverse effects caused by its high dosing frequency. The objective of this investigation was to Formulate an adhesive-type transdermal patch of treprostinil and evaluate it both in vitro and in vivo. A 32-factorial design was utilized to optimize the selected independent variables (X1: drug amount, X2: enhancer concentration) on the response variables (Y1: drug release, Y2: transdermal flux). The optimized patch was evaluated for various pharmaceutical properties, skin irritation, and pharmacokinetics in rats. Optimization results signify considerable influence (p < 0.0001) of X1 on both Y1 and Y2, as compared to X2. The optimized patch possesses higher drug content (>95%), suitable surface morphology, and an absence of drug crystallization. FTIR analysis revealed compatibility of the drug with excipients, whereas DSC thermograms indicate that the drug exists as amorphous in the patch. The adhesive properties of the prepared patch confirm adequate adhesion and painless removal, while the skin irritation study confirms its safety. A steady drug release via Fickian diffusion and greater transdermal delivery (~23.26 µg/cm2/h) substantiate the potential of the optimized patch. Transdermal therapy resulted in higher treprostinil absorption (p < 0.0001) and relative bioavailability (237%) when compared to oral administration. Overall, the results indicate that the developed drug in the adhesive patch can effectively deliver treprostinil through the skin and could be a promising treatment option for pulmonary arterial hypertension.
RESUMEN
The therapeutic effectiveness of paliperidone in the treatment of schizophrenia has been limited by its poor oral bioavailability; hence, an alternative route could be appropriate. This study investigates the feasibility of developing a buccal film impregnated with paliperidone-loaded nanostructured lipid carriers (NLCs) and assesses the potential to enhance its bioavailability. Box-Behnken-based design optimization of NLCs was performed by examining the particles' physical characteristics. The polymeric film was used to load optimized NLCs, which were then assessed for their pharmaceutical properties, permeability, and pharmacokinetics. The optimization outcomes indicated that selected formulation variables had a considerable (p < 0.05) impact on responses such as particle size, entrapment efficiency, and % drug release. Desired characteristics such as a negative charge, higher entrapment efficiency, and nanoparticles with ideal size distribution were shown by optimized NLC dispersions. The developed film demonstrated excellent physico-mechanical properties, appropriate texture, good drug excipient compatibility (chemically stable formulation), and amorphous drug nature. A sustained Weibull model drug release (p < 0.0005) and superior flux (~5-fold higher, p < 0.005) were seen in NLC-loaded film compared to plain-drug-loaded film. The pharmacokinetics profile in rabbits supports the goal of buccal therapy as evidenced by significantly higher AUC0-12 (p < 0.0001) and greater relative bioavailability (236%) than the control. These results support the conclusion that paliperidone-loaded NLC buccal film has the potential to be an alternate therapy for its effective administration in the treatment of schizophrenia.
RESUMEN
The efficacy of topical antifungal therapy in onychomycosis has been hindered by the failure of the antimycotic to permeate the nail plate. This research aims to design and develop a transungual system for the effective delivery of efinaconazole utilizing constant voltage iontophoresis. Seven prototype drug-loaded hydrogel formulations (E1-E7) were prepared to assess the influence of solvent (ethanol) and cosolvent (Labrasol®) on transungual delivery. Optimization was performed to evaluate the effect of three independent variables; voltage, solvent-to-cosolvent ratio, and penetration enhancer (PEG 400) concentration on critical quality attributes (CQAs), such as drug permeation and loading into the nail. The selected hydrogel product was characterized for pharmaceutical properties, efinaconazole release from the nail, and antifungal activity. Preliminary data indicates ethanol, Labrasol®, and voltage influence the transungual delivery of efinaconazole. Optimization design indicates a significant impact by applied voltage (p-0.0001) and enhancer concentration (p-0.0004) on the CQAs. Excellent correlation between selected independent variables and CQAs was confirmed by the high desirability value (0.9427). A significant (p < 0.0001) enhancement in the permeation (~78.59 µg/cm2) and drug loading (3.24 µg/mg) was noticed in the optimized transungual delivery with 10.5 V. FTIR spectral data indicates no interaction between the drug and excipients, while the DSC thermograms confirmed the amorphous state of the drug in the formulation. Iontophoresis produces a drug depot in the nail that releases above the minimum inhibitory concentration level for an extended period, potentially reducing the need for frequent topical treatment. Antifungal studies further substantiate the release data and have shown remarkable inhibition of Trichophyton mentagrophyte. Overall, the promising results obtained here demonstrate the prospective of this non-invasive method for the effective transungual delivery of efinaconazole, which could improve the treatment of onychomycosis.
RESUMEN
Retinal neurodegeneration is considered an early event in the pathogenesis of several ocular diseases, such as diabetic retinopathy, age-related macular degeneration, and glaucoma. At present, there is no definitive treatment to prevent the progression or reversal of vision loss caused by photoreceptor degeneration and the death of retinal ganglion cells. Neuroprotective approaches are being developed to increase the life expectancy of neurons by maintaining their shape/function and thus prevent the loss of vision and blindness. A successful neuroprotective approach could prolong patients' vision functioning and quality of life. Conventional pharmaceutical technologies have been investigated for delivering ocular medications; however, the distinctive structural characteristics of the eye and the physiological ocular barriers restrict the efficient delivery of drugs. Recent developments in bio-adhesive in situ gelling systems and nanotechnology-based targeted/sustained drug delivery systems are receiving a lot of attention. This review summarizes the putative mechanism, pharmacokinetics, and mode of administration of neuroprotective drugs used to treat ocular disorders. Additionally, this review focuses on cutting-edge nanocarriers that demonstrated promising results in treating ocular neurodegenerative diseases.
RESUMEN
Dolutegravir's therapeutic effectiveness in the management of neuroAIDS is mainly limited by its failure to cross the blood-brain barrier. However, lipid-based nanovesicles such as nanoemulsions have demonstrated their potential for the brain targeting of various drugs by intranasal delivery. Thus, the purpose of this study was to develop a Dolutegravir-loaded nanoemulsion-based in situ gel and evaluate its prospective for brain targeting by intranasal delivery. Dolutegravir-loaded nanoemulsions were prepared using dill oil, Tween® 80, and Transcutol® P. Optimization of the nanoemulsion particle size and drug release was carried out using a simplex lattice design. Formulations (F1-F7 and B1-B6) were assessed for various pharmaceutical characteristics. Ex vivo permeation and ciliotoxicity studies of selected in situ gels (B1) were conducted using sheep nasal mucosa. Drug targeting to the brain was assessed in vivo in rats following the nasal delivery of B1. The composition of oil, surfactant, and cosurfactant significantly (p < 0.05) influenced the dependent variables (particle size and % of drug release in 8 h). Formulation B1 exhibits pharmaceutical characteristics that are ideal for intranasal delivery. The mucosal steady-state flux noticed with BI was significantly greater (p < 0.005) than for the control gel. A histopathology of nasal mucosa treated with BI showed no signs of toxicity or cellular damage. Intranasal administration of B1 resulted in greater Cmax (~six-fold, p < 0.0001) and AUC0-α (~five-fold, p < 0.0001), and decreased Tmax (1 h) values in the brain, compared to intravenous administration. Meantime, the drug level in the plasma was relatively low, suggesting less systemic exposure to Dolutegravir through intranasal delivery. In summary, the promising data observed here signifies the prospective of B1 to enhance the brain targeting of Dolutegravir by intranasal delivery and it could be used as a feasible and practicable strategy for the management of neuroAIDS.