Acid-activated α-MnO2 for photothermal co-catalytic oxidative degradation of propane: Activity and reaction mechanism.

In order to further reduce the energy consumption of the conventional thermal catalytic oxidation system and improve the degradation efficiency of pollutants, photothermal synergistic catalytic oxidation (PTSCO) system was constructed in this paper with propane as simulated pollutant representing VOCs, and then the modified α-MnO2 catalysts were prepared by using the acid activation method, which were used for the catalytic oxidation of propane in PTSCO. The α-MnO2 with appropriate acid concentration possessed excellent low-temperature reducibility, abundant active oxygen species, fast oxygen migration rate and a large number of acid sites. The optimal catalyst, H0.05-MnO2, had a T90 of 204 °C in the PTSCO system, which reduced by more than 30 °C relative to the α-MnO2 (T90 of 235 °C). Moreover, H0.05-MnO2 demonstrated excellent water resistance and long-term stability (T = 45 h). It was shown that the combination of photocatalysis and thermocatalysis can improve propane degradation by examining the kinetics of propane degradation in the PTSCO system and the conformational relationship of propane degradation by catalysts. Furthermore, a multi-pathway synergistic mechanism between photocatalysis and thermocatalysis in the PTSCO system was proposed. This work provided a theoretical basis for the preparation of high-performance catalysts and the catalytic degradation of propane.

Adsorption coupling photocatalytic removal of gaseous n-hexane by phosphorus-doped g-C3N4/TiO2/Zn(OAc)2-ACF composites.

VOCs emission reduction in the petroleum and petrochemical industry is a hot and difficult topic at present. The single method may not be able to meet the actual treatment status. Therefore, the adsorption coupled photocatalytic degradation technology was used to remove VOCs. Phosphorus-doped carbon nitride (PCN) and PCN/TiO2 were prepared by hydrothermal synthesis and sol-gel method, and then PCN/TiO2/Zn(OAc)2-ACF composites were prepared by ultrasonic impregnation on zinc acetate modified activated carbon fibers (Zn(OAc)2-ACF). The removal efficiency of n-hexane by composite materials was explored in a self-made reactor, and the factors affecting removal efficiency, removal mechanism, and possible ways of degradation were investigated. The results showed that under the optimum reaction conditions (initial concentration of n-hexane 200 mg/m3, space velocity 1000 h-1, light intensity 24 W, mass fraction of doped PCN 6%, loading twice, calcination temperature 450 °C), PCN/TiO2/Zn(OAc)2-ACF composite has the highest removal efficiency of n-hexane (90.2%). The adsorption capacity of the composites after doping the P element was 215.3 mg/g, which did not enhance the adsorption performance compared with that before doping, but the removal rate of n-hexane was higher. This showed that doping P element was helpful to enhance the photocatalytic activity of the composites.