MUC1 promotes glioblastoma progression and TMZ resistance by stabilizing EGFRvIII.

Epidermal growth factor receptor variant III (EGFRvIII) is a mutant isoform of EGFR with a deletion of exons 2-7 making it insensitive to EGF stimulation and downstream signal constitutive activation. However, the mechanism underlying the stability of EGFRvIII remains unclear. Based on CRISPR-Cas9 library screening, we found that mucin1 (MUC1) is essential for EGFRvIII glioma cell survival and temozolomide (TMZ) resistance. We revealed that MUC1-C was upregulated in EGFRvIII-positive cells, where it enhanced the stability of EGFRvIII. Knockdown of MUC1-C increased the colocalization of EGFRvIII and lysosomes. Upregulation of MUC1 occurred in an NF-κB dependent manner, and inhibition of the NF-κB pathway could interrupt the EGFRvIII-MUC1 feedback loop by inhibiting MUC1-C. In a previous report, we identified AC1Q3QWB (AQB), a small molecule that could inhibit the phosphorylation of NF-κB. By screening the structural analogs of AQB, we obtained EPIC-1027, which could inhibit the NF-κB pathway more effectively. EPIC-1027 disrupted the EGFRvIII-MUC1-C positive feedback loop in vitro and in vivo, inhibited glioma progression, and promoted sensitization to TMZ. In conclusion, we revealed the pivotal role of MUC1-C in stabilizing EGFRvIII in glioblastoma (GBM) and identified a small molecule, EPIC-1027, with great potential in GBM treatment.

The synergistic effect of trap deactivation and hysteresis suppression at grain boundaries in perovskite interfaces via multifunctional groups.

In spite of the outstanding photoelectric properties of perovskite materials, numerous defects produced in the preparation process eventually result in decomposition of the perovskite layer. To date, the mechanism of defect passivation and hysteresis reduction via additive engineering has still been obscure for perovskite materials, which seriously restricts performance improvement of the devices. Herein, conductive atomic force microscopy (C-AFM) and Kelvin probe force microscopy (KPFM) measurements were applied to probe carbamic acid ethyl ester (EU)-based trap passivation and suppression of hysteresis in perovskite films. The results indicate that the internal interaction between multifunctional bonds ("CO" and "-NH2") of EU and Pb2+ ions of the perovskite may inactivate the trap state and inhibit ion migration within sub-grains and grain boundaries (GBs), resulting in improvement of the long-term stability of the cells. In consequence, the EU-modified champion device prepared in all-air achieved a power conversion efficiency (PCE) of 20.10%, one of the high performances for the devices fabricated in air to date. In short, this work will propose some interesting speculation about ion migration as well as its influence on hysteresis in perovskite materials.

Clinical application of spinal robot in cervical spine surgery: safety and accuracy of posterior pedicle screw placement in comparison with conventional freehand methods.

The novel robot-assisted (RA) technique has been utilized increasingly to improve the accuracy of cervical pedicle screw placement. Although the clinical application of the RA technique has been investigated in several case series and comparative studies, the superiority and safety of RA over conventional freehand (FH) methods remain controversial. Meanwhile, the intra-pedicular accuracy of the two methods has not been compared for patients with cervical traumatic conditions. This study aimed to compare the rate and risk factors of intra-pedicular accuracy of RA versus the conventional FH approach for posterior pedicle screw placement in cervical traumatic diseases. A total of 52 patients with cervical traumatic diseases who received cervical screw placement using RA (26 patients) and FH (26 patients) techniques were retrospectively included. The primary outcome was the intra-pedicular accuracy of cervical pedicle screw placement according to the Gertzbin-Robbins scale. Secondary outcome parameters included surgical time, intraoperative blood loss, postoperative drainage, postoperative hospital stay, and complications. Moreover, the risk factors that possibly affected intra-pedicular accuracy were assessed using univariate analyses. Out of 52 screws inserted using the RA method, 43 screws (82.7%) were classified as grade A, with the remaining 7 (13.5%) and 2 (3.8%) screws classified as grades B and C. In the FH cohort, 60.8% of the 79 screws were graded A, with the remaining screws graded B (21, 26.6%), C (8, 10.1%), and D (2, 2.5%). The RA technique showed a significantly higher rate of optimal intra-pedicular accuracy than the FH method (P = 0.008), but there was no significant difference between the two groups in terms of clinically acceptable accuracy (P = 0.161). Besides, the RA technique showed remarkably longer surgery time, less postoperative drainage, shorter postoperative hospital stay, and equivalent intraoperative blood loss and complications than the FH technique. Furthermore, the univariate analyses showed that severe obliquity of the lateral atlantoaxial joint in the coronal plane (P = 0.003) and shorter width of the lateral mass at the inferior margin of the posterior arch (P = 0.014) were risk factors related to the inaccuracy of C1 screw placement. The diagnosis of HRVA (P < 0.001), severe obliquity of the lateral atlantoaxial joint in the coronal plane (P < 0.001), short pedicle width (P < 0.001), and short pedicle height (P < 0.001) were risk factors related to the inaccuracy of C2 screw placement. RA cervical pedicle screw placement was associated with a higher rate of optimal intra-pedicular accuracy to the FH technique for patients with cervical traumatic conditions. The severe obliquity of the lateral atlantoaxial joint in the coronal plane independently contributed to high rates of the inaccuracy of C1 and C2 screw placements. RA pedicle screw placement is safe and useful for cervical traumatic surgery.

Characteristics and evaluation of C1 posterior arch variation for transpedicular screw placement between patients with and without basilar invagination.

BACKGROUND: C1 transpedicular screw (C1TS) placement provided satisfactory pullout resistance and 3D stability, but its application might be limited in patients with basilar invagination (BI) due to the high incidences of the atlas anomaly and vertebral artery (VA) variation. However, no study has explored the classifications of C1 posterior arch variations and investigated their indications and ideal insertion trajectories for C1TS in BI. PURPOSE: To investigate the bony and surrounding arterial characteristics of the atlas, classify posterior arch variations, identify indications for C1TS, evaluate ideal insertion trajectories for C1TS in BI patients without atlas occipitalization (AO), and compare them with those without BI and AO as control. METHODS: A total of 130 non-AO patients with and without BI (52 patients and 78 patients, respectively) from two medical centers were included at a 1:1.5 ratio. The posterior arch variations were assessed using a modified C1 morphological classification. Comparisons regarding the bony and surrounding arterial characteristics, morphological classification distributions, and ideal insertion trajectories between BI and control groups were performed. The subgroup analyses based on different morphological classifications were also conducted. In addition, the factors possibly affecting the insertion parameters were investigated using multiple linear regression analyses. RESULTS: The BI group was associated with significantly smaller lateral mass height and width, sagittal length of posterior arch, pedicle height, vertical height of posterior arch, and distance between VA and VA groove (VAG) than control group. Four types of posterior arch variations with indications for different screw placement techniques were classified; Classifications I and II were suitable for C1TS. The BI cohort showed a significantly lower rate of Classification I than the control cohort. In the BI group, the subgroup of Classification I had significantly larger distance between the insertion point (IP) and inferior aspect of the posterior arch. In addition, it had the narrowest width along ideal screw trajectory, but a significantly more lateral ideal mediolateral angle than the subgroup of Classification II. Multiple linear regression indicated that the cephalad angle was significantly associated with the diagnosis of BI (B = 3.708, P < 0.001) and sagittal diameter of C1 (B = 3.417, P = 0.027); the ideal mediolateral angle was significantly associated with BMI (B = 0.264, P = 0.031), sagittal diameter of C1 (B = - 4.559, P = 0.002), and pedicle height (B = - 2.317, P < 0.001); the distance between the IP and inferior aspects of posterior arch was significantly associated with age (B = - 0.002, P = 0.035), BMI (B = - 0.007, P = 0.028), sagittal length of posterior arch (B = - 0.187, P = 0.032), pedicle height (B = - 0.392, P < 0.001), and middle and lower parts of posterior arch (B = 0.862, P < 0.001). CONCLUSION: The incidence of posterior arch variation in BI patients without AO was remarkably higher than that in control patients. The insertion parameters of posterior screws were different between the morphological classification types in BI and control groups. The distance between VA V3 segments and VAG in BI cohort was substantially smaller than that in control cohort. Preoperative individual 3D computed tomography (CT), CT angiography and intraoperative navigation are recommended for BI patients receiving posterior screw placement.

Medium and long-term radiographic and clinical outcomes of Dynesys dynamic stabilization versus instrumented fusion for degenerative lumbar spine diseases.

BACKGROUND: Dynesys stabilization (DS) is utilized to preserve mobility at the instrumental segments and prevent adjacent segment pathology in clinical practice. However, the advantages of DS method in medium and long-term follow-up remain controversial. OBJECTIVE: To compare the radiographic and clinical outcomes between DS and instrumented fusion in the treatment of degenerative lumbar spine disease with or without grade I spondylolisthesis with a minimum follow-up period of 2 years. METHODS: We conducted a comprehensive search of PubMed, EMBASE, Cochrane, and Web of Science databases, Chinese National Knowledge Databases, and Wanfang Database for potentially eligible articles. Clinical outcomes were assessed in terms of VAS and ODI scores, screw loosening and breakage, and surgical revision. Radiographic outcomes were assessed in terms of postoperative range of movement (ROM) and disc heigh. Moreover, adjacent segment degeneration (ASDeg) and adjacent segment disease (ASDis) were evaluated. RESULTS: Seventeen studies with 1296 patients were included in the meta-analysis. The DS group was associated with significantly lower postoperative VAS scores for low-back and leg pain, and lower rate of surgical revision than the fusion group. Moreover, the Dynesys group showed significantly less ASDeg than the fusion group but showed no significant advantage over the fusion group in terms of preventing ASDis. Additionally, the ROM at the stabilized segments of the fusion group decreased significantly and that at the adjacent segments increased significantly compared with those of the DS group. CONCLUSION: DS showed comparable clinical outcomes and provided benefits in preserving the motion at the stabilized segments, thus limiting the hypermobility at the adjacent segments and preventing ASDeg compared with the fusion method in degenerative disease with or without grade I spondylolisthesis.

Magnetic-Actuated Robot Enables High-Performance Underwater Bubble Maneuvering on Laser-Textured Biomimetic Slippery Surfaces.

Controllable underwater gas bubble (UGB) transport on a surface is realized by geography-/stimuli-induced wettability gradient force (Fwet-grad). Unfortunately, the high-speed maneuvering of UGBs along free routes on planar surfaces remains challenging. Herein, a regime of magnetism-actuated robot (MAR) mounting on biomimetic laser-ablated lubricant-impregnated slippery surfaces (LA-LISS) is reported. Leveraging on LA-LISS, MAR-entrained UGBs can move along arbitrary directions through the loading of a tracing magnetic trigger. The underlying hydrodynamics is that MAR-entrained UGBs would be actuated slipping upon a giant magnetic-induced towing force (FM//). Once the magnetism stimuli is discharged, FM// vanishes immediately to immobilize the UGBs on LA-LISS. Thanks to the MAR's robust bubble affinity, a typical UGB (20 µL) on the optimized LA-LISS can be accelerated at 500 mm/s2 and gain an ultrafast velocity of over 205 mm/s that far exceeds previously reported figures. Moreover, fundamental physics renders MAR antibuoyancy, steering locomotive UGBs on the inclined LA-LISS. Significantly, an MAR propelling UGBs to configure desirable patterns, realize on-demand coalescence, remedy the cutoff switch, as well as facilitate a programmable light-control-light optical shutter is successfully deployed. Compared with previous smart surfaces, the current multifunctional regime is more competent for harnessing UGBs featuring an unparalleled transport velocity independent of the feeble Fwet-grad.

Facile preparation of nanocellulose/Zn-MOF-based catalytic filter for water purification by oxidation process.

Sulfate radical (SO4•-)-based advanced oxidation processes (SR-AOPs) have recently attracted much attention due to their potential in degrading organic pollutants. Metal-organic frameworks (MOFs) have been reported as effective materials to generate SO4•-. However, it is challenging to separate and recover the dispersed MOF particles from the reaction solution when MOFs are used alone. We used cellulose nanofibers (CNFs) as a porous filter template to immobilize Zn-based MOF, zeolitic imidazolate framework-8 (ZIF-8), and obtained a catalytic composite membrane having peroxymonosulfate (PMS) activating function to produce SO4•-. The CNF was effective in holding ZIF-8 nanoparticle and making a durable porous filter. The activated PMS-produced •OH and SO4•- radicals from ZIF-8 play an important role in the catalytic reaction. More than 90% of methylene blue and rhodamine B was degraded by ZIF-8/CNFs composite membrane in the PMS environment within 60 min. The ZIF-8/CNFs catalytic filters can be used several times without performance reduction for organic dye degradation. The results show that ZIF-8/CNFs catalytic membrane can be separated from organic pollution system quickly and used for the efficient separation and recovery of MOF particle-based catalytic materials. Therefore, this study provides a new perspective for fabricating the MOFs particles-immobilized catalytic filter by biomass nanocellulose-based materials for water purification. This method can be used for facile fabrication of the cellulose-based porous functional filter and open diverse applications.

Rates and risk factors of intrapedicular accuracy and cranial facet joint violation among robot-assisted, fluoroscopy-guided percutaneous, and freehand techniques in pedicle screw fixation of thoracolumbar fractures: a comparative cohort study.

BACKGROUND: Robot-assisted (RA) technique has been increasingly applied in clinical practice, providing promising outcomes of inserting accuracy and cranial facet joint protection. However, studies comparing this novel method with other assisted methods are rare, and the controversy of the superiority between the insertion techniques remains. Thus, we compare the rates and risk factors of intrapedicular accuracy and cranial facet joint violation (FJV) of RA, fluoroscopy-guided percutaneous (FP), and freehand (FH) techniques in the treatment of thoracolumbar fractures. METHODS: A total of 74 patients with thoracolumbar fractures requiring pedicle screw instruments were retrospectively included and divided into RA, FP, and FH groups from June 2016 to May 2020. The primary outcomes were the intrapedicular accuracy and cranial FJV. The factors that affected the intrapedicular accuracy and cranial FJV were assessed using multivariate analyses. RESULTS: The optimal intrapedicular accuracy of pedicle screw placement (Grade A) in the RA, FP, and FH groups was 94.3%, 78.2%, and 88.7%, respectively. This finding indicates no significant differences of RA over FH technique (P = 0.062) and FP technique (P = 0.025), but significantly higher accuracies of RA over FP (P < 0.001). In addition, the rates of proximal FJV in RA, FP, and FH groups were 13.9%, 30.8%, and 22.7%, respectively. RA had a significantly greater proportion of intact facet joints than the FP (P = 0.002). However, FP and FH (P = 0.157), as well as RA and FH (P = 0.035) showed significantly similar outcomes with respect to the proximal FJV. The logistic regression analysis showed that FP technique (OR = 3.056) was independently associated with insertion accuracy. Meanwhile, the age (OR = 0.974), pedicle angle (OR = 0.921), moderate facet joint osteoarthritis (OR = 5.584), and severe facet joint osteoarthritis (OR = 11.956) were independently associated with cranial FJV. CONCLUSION: RA technique showed a higher rate of intrapedicular accuracy and a lower rate of cranial FJV than FP technique, and similar outcomes to FH technique in terms of intrapedicular accuracy and cranial FJV. RA technique might be a safe method for pedicle screw placement in thoracolumbar surgery. LEVEL OF EVIDENCE: 3.

Predictors of accurate intrapedicular screw placement in single-level lumbar (L4-5) fusion: robot-assisted pedicle screw, traditional pedicle screw, and cortical bone trajectory screw insertion.

BACKGROUND: The superiorities in proximal facet joint protection of robot-assisted (RA) pedicle screw placement and screw implantation via the cortical bone trajectory (CBT) have rarely been compared. Moreover, findings on the screw accuracy of both techniques are inconsistent. Therefore, we analyzed the screw accuracy and incidence of facet joint violation (FJV) of RA and CBT screw insertion in the same study and compared them with those of conventional pedicle screw (PS) insertion. The possible factors affecting screw accuracy and FJV were also analyzed. METHODS: A total of 166 patients with lumbar degenerative diseases requiring posterior L4-5 fusion were retrospectively included and divided into the RA, PS, and CBT groups from March 2019 to December 2021. The grades of intrapedicular accuracy and superior FJV were evaluated according to the Gertzbin-Robbins scale and the Babu scale based on postoperative CT. Univariable and multivariable analyses were conducted to assess the possible risk factors associated with intrapedicular accuracy and superior FJV. RESULTS: The rates of optimal screw insertion in the RA, PS, and CBT groups were 87.3%, 81.3%, and 76.5%, respectively. The difference between the RA and CBT groups was statistically significant (P = 0.004). Superior FJVs occurred in 28.2% of screws in RA, 45.0% in PS, and 21.6% in CBT. The RA and CBT groups had fewer superior FJVs than the PS group (P = 0.008 and P < 0.001, respectively), and no significant difference was observed between the RA and CBT groups (P = 0.267). Multivariable analysis revealed that the CBT technique was an independent risk factor for intrapedicular accuracy. Furthermore, older age, the conventional PS technique and a smaller facet angle were independently associated with the incidence of superior FJVs. CONCLUSIONS: The RA and CBT techniques were associated with fewer proximal FJVs than the PS technique. The RA technique showed a higher rate of intrapedicular accuracy than the CBT technique. The CBT technique was independently associated with screw inaccuracy. Older age, conventional PS technique and coronal orientation of the facet join were independent risk factors for superior FJV.

Exogenous pancreatic kininogenase protects against renal fibrosis in rat model of unilateral ureteral obstruction.

Tissue kallikrein has protective function against various types of injury. In this study, we investigated whether exogenous pancreatic kininogenase (PK) conferred renoprotection in a rat model of unilateral ureteral obstruction (UUO) and H2O2-treated HK-2 cells in vitro. SD rats were subjected to UUO surgery, then PK (7.2 U/g per day, ip) was administered for 7 or 14 days. After the treatment, rats were euthanized; the obstructed kidneys were harvested for further examination. We found that PK administration significantly attenuated interstitial inflammation and fibrosis, and downregulated the expression of proinflammatory (MCP-1, TLR-2, and OPN) and profibrotic (TGF-ß1 and CTGF) cytokines in obstructed kidney. UUO-induced oxidative stress, closely associated with excessive apoptotic cell death and autophagy via PI3K/AKT/FoxO1a signaling, which were abolished by PK administration. We further showed that PK administration increased the expression of bradykinin receptors 1 and 2 (B1R and B2R) mRNA and the production of NO and cAMP in kidney tissues. Coadministration with either B1R antagonist (des-Arg9-[Leu8]-bradykinin) or B2R antagonist (icatibant) abrogated the renoprotective effects of PK, and reduced the levels of NO and cAMP in obstructed kidney. In H2O2-treated HK-2 cells, addition of PK (6 pg/mL) significantly decreased ROS production, regulated the expression of oxidant and antioxidant enzymes, suppressed the expression of TGF-ß1 and MCP-1, and inhibited cell apoptosis. Our data demonstrate that PK treatment protects against the progression of renal fibrosis in obstructed kidneys.

Image quality and diagnostic value of ultra low-voltage, ultra low-contrast coronary CT angiography.

OBJECTIVE: To explore the image quality (IQ) and diagnostic value of 70 kVp turbo high-pitch coronary CT angiography (THP-CCTA) using automated tube voltage selection (ATVS) and 30 mL of low-concentration contrast agent. METHODS: Patients who underwent 70 kVp THP-CCTA using ATVS with 30 mL of contrast agent (group A) were prospectively enrolled, and those who underwent conventional CCTA (100/120 kVp, prospective sequential mode with 65-75 mL of contrast agent) (group B) were retrospectively selected for study. IQ was assessed subjectively on a 5-point scale, and diagnostic value was assessed based on invasive coronary angiography as the gold standard. Heart rate (HR), HR fluctuation (HRF), body mass index (BMI), effective radiation dose (ED), and iodine uptake (IU) were recorded. RESULTS: A total of 796 patients (398/398 in groups A/B) were included. Between-group differences in age, gender, BMI, HR, HRF, and IQ values were not significant. The ED/IU values were 0.3 ± 0.1 mSv/9.0 ± 0.0 g and 5.8 ± 1.8 mSv/22.9 ± 1.0 g in groups A and B, respectively (p < 0.01). The sensitivity, specificity, positive and negative predictive values, and accuracy of THP-CCTA for the diagnosis of ≥ 50% stenosis were 94.8%, 97.5%, 92.0%, 98.4%, and 96.9% respectively. The mean HR and coronary calcium score were independent predictors of diagnostic image quality, and the best cutoff values were 71.5 bpm and 444.1 respectively. CONCLUSION: This third-generation dual-source CT imaging modality, a 70-kVp THP-CCTA system using ATVS with 30 mL of low-concentration contrast agent, produces high-quality images with high diagnostic accuracy for significant stenosis, with ultra low ED and IU. This technique was most promising in individuals with an HR < 71.5 bpm and coronary calcium score < 444.1. KEY POINTS: • Turbo high-pitch CCTA using 70 kVp via automated tube voltage selection and 30 mL of low-concentration contrast agent is feasible. • This protocol provides high diagnostic accuracy for significant coronary stenosis and reduces radiation doses and iodine uptake significantly. • This protocol was most promising in individuals with an HR < 71.5 bpm and coronary calcium score < 444.1.

Adsorptive removal of phenol from aqueous solution with zeolitic imidazolate framework-67.

ZIF-67(zinc-methylimidazolate framework-67), one of the zeolitic imidazolate frameworks (ZIFs), was used for the removal of phenol from aqueous solutions via adsorption and shows high adsorption capacity for phenol. The thermodynamic and kinetic adsorption behavior of ZIF-67 for phenol in water with concentration ranging from 50 to 300 ppm were investigated in a batch reactor and a ZIF-67 packed column, respectively. The effects of pH, contact time, zeta potential of the adsorbent and temperature on the adsorption behavior were evaluated, and the results demonstrated that the adsorption is primarily brought about by a specific favorable interaction (electrostatic interaction) between phenol and ZIF-67 surface. The suitability of the Langmuir adsorption model to the equilibrium data was investigated for each phenol-adsorbent system, which the results showed that the equilibrium data for all the phenol-sorbent systems fitted the Langmuir model. Thermodynamic parameters such as Gibbs free energy are calculated from the experimental data at different temperatures. The adsorbent could be perfectly regenerated at 120 °C with little loss in the adsorption ability.

Use of Dual-Source Computed Tomography to Evaluate Renal Cortical Perfusion in Patients With Essential Hypertension Without Diabetes: Preliminary Results.

OBJECTIVES: To assess renal cortical perfusion parameter changes using computed tomography (CT) renal perfusion examination in patients with essential hypertension (EH), especially those with EH-related target organ damage (TOD), and to correlate renal perfusion parameters with clinical and laboratory data. METHODS: Consecutive patients with EH (without exclusion criteria) and healthy controls underwent 128-slice dual-source CT perfusion imaging. Quantitative perfusion analysis of renal cortex parameters [blood flow (BF), blood volume, time to peak, and mean transit time] was performed. RESULTS: Ninety-one participants (60 patients with EH, 31 healthy controls) underwent renal perfusion CT imaging, and 84 participants (92.3%) were eligible for perfusion analysis. The BF values were lower in patients with EH than that in controls. Blood flow was correlated with age (P < 0.01), duration of hypertension (P < 0.01), estimated glomerular filtration rate (eGFR; P < 0.01), pulse pressure (P < 0.05), and body mass index (BMI; P < 0.05). Duration of hypertension, eGFR, and BMI were independently associated with BF. No parameter differed between control subjects and those with EH but not. Blood flow was lower in patients with TOD than in control subjects (P < 0.01), but no other parameter differed. Blood flow was lower (P < 0.01) and mean transit time and time to peak were higher (P < 0.05) in the TOD than that in the non-TOD group. CONCLUSIONS: Essential hypertension, especially EH-related TOD, alters renal cortical perfusion parameters, especially BF. Four-dimensional spiral CT renal perfusion examination showed that duration of hypertension, eGFR, and BMI were independently associated with decreased BF.

Multifunctional chemical anchors achieve a boosted fill factor and mitigate ion migration of high-stability perovskite solar cells.

To date, it is urgent to produce perovskite films with comparative or even better morphologies in an open-air environment. Unfortunately, a substantial number of trap states on the grain surface, especially the grain boundaries (GBs) of a perovskite layer, can bring about significant deterioration in the performance of PSCs. Trap-induced carrier recombination directly exerts a detrimental influence on the carrier collection efficiency and electronic properties of a perovskite active film. Herein, 4(5)-iodoimidazole (4II), a small organic molecule agent, was introduced to passivate the surface and bulk traps of the active film, which resulted in a controlled morphology, improved carrier extraction and suppressed ion migration for the devices fabricated in a relatively humid and O2-containing environment. Conductive atomic force microscopy (C-AFM) and Kelvin probe force microscopy (KPFM) measurements were applied to study trap passivation and suppression of ion migration across the GBs of perovskite films. The results manifest that the -CN group preferably bonds with the less-coordinated Pb2+ and the -NH- group favorably forms hydrogen bonds with the uncoordinated I-. As a result, the champion device delivered a significantly boosted power conversion efficiency from 17.22% to 20.95%, with an improved fill factor (FF) from 70.54% to 80.40%, and improved ambient stability of the unencapsulated device. This study may probe research insight into the design of passivators with synergistic effects for morphology control and reduction of carrier recombination loss for equally efficient perovskite photovoltaics fabricated in ambient air.

Design and radiological confirmation of 3-column cortical bone trajectory in the lumbar spine.

OBJECTIVE: The aim of this study was to design a novel lumbar cortical bone trajectory (CBT) penetrating the anterior, middle, and posterior vertebral area using imaging; measure the relevant parameters to find theoretical parameters and screw placement possibilities; and investigate the optimal implantation trajectory of the CBT in patients with osteoporosis. METHODS: Three types of CBTs with appropriate lengths were selected to simulate screw placement using Mimics software. These CBTs were classified as the leading tip of the trajectory pointing to the posterior quarter area (original CBT [CBT-O]) and middle (novel CBT A [CBT-A]) and anterior quarter (novel CBT B [CBT-B]) of the superior endplate. The authors then measured the maximum screw diameter (MSD) and length (MSL), cephalad (CA) and lateral (LA) angles, and bone mineral density (Hounsfield unit [HU] values) of the planned novel 3-column CBT screw placements. The differences in the parameters of the novel CBTs, the percentages of successfully planned CBT screws, and the factors that influenced the successful planning of 3-column CBT screws were analyzed. RESULTS: Three-column CBT screws were successfully designed in all segments of the lumbar spine. The success rate of the 3-column CBT planned screws was 72.25% (83.25% for CBT-A and 61.25% for CBT-B). From the CBT-O type, to the CBT-A type, to the CBT-B type, the LA, CA, and MSD of the novel CBT screws decreased with increasing trajectory length. The HU values of the three types of trajectories were all significantly higher than that of the traditional pedicle screw trajectory (p < 0.001). The main factor affecting successful planning of the 3-column CBT screw was pedicle width. CONCLUSIONS: Moderating adjustment of the original screw parameters by reducing LAs and CAs to penetrate the anterior, middle, and posterior columns of the vertebral body using the 3-column CBT screw is feasible, especially in the lower lumbar spine.

Recent development of metal-organic frameworks and their composites in electromagnetic wave absorption and shielding applications.

With the rapid development of information and communication industries, the usage of electromagnetic waves has caused the hazard of human health and misfunction of devices. The adsorption and shielding of electromagnetic waves have been achieved in various materials. The unique adjustable spatial structure makes metal-organic frameworks (MOFs) promising for electromagnetic shielding and adsorbing. As MOFs research advances, various large-scale MOF-based materials have been developed. For instance, MOFs spatial structure has been expanded from 2D to 3D to load more ligands. Progress in synthetic methods for MOFs and their derivatives is advancing, with priority on large-scale preparation and green synthesis. This review summarizes the methods for synthesizing MOFs and their derivatives, and explores the effects of MOFs spatial structure on electromagnetic interference (EMI) shielding and electromagnetic wave absorption capabilities. At the same time, detailed examples are used to focus on the applications of five different MOFs composites in electromagnetic shielding and electromagnetic wave absorption. Finally, the current challenges and prospects of MOFs in the electromagnetic field are introduced, providing a useful reference for the preparation and design of MOFs and their composites for electromagnetic wave processing applications.

FSTL1 Accelerates Nucleus Pulposus Cell Senescence and Intervertebral Disc Degeneration Through TLR4/NF-κB Pathway.

Intervertebral disc degeneration (IVDD) is a major contributor to low back pain (LBP), and inflammatory factors play crucial roles in its pathogenesis. Follistatin-like 1 (FSTL1) has been reported to induce an inflammatory response in chondrocytes, microglia and preadipocytes, but its role in the pathogenesis of nucleus pulposus cell (NPC) degeneration remains unclear. In this study, we mainly utilized an acidosis-induced NPC degeneration model and a rabbit puncture IVDD model to investigate the role of FSTL1 in IVDD both in vitro and in vivo. We confirmed that FSTL1 expression significantly increased in nucleus pulposus (NP) tissues from IVDD patients and rabbit puncture IVDD models. The expression levels of FSTL1 were significantly increased in all three models of NPC degeneration under harsh microenvironments. In addition, recombinant human FSTL1 (rh-FSTL1) was found to upregulate the expression of p16 and p21, increase the number of senescence-associated ß-galactosidase (SA-ß-gal)-positive cells, induce senescence-related secretory phenotypes (SASP), and downregulate extracellular matrix (ECM) protein expressions, leading to an imbalance in ECM metabolism destructions. Conversely, silencing of FSTL1 by small interfering RNA (siRNA) ameliorated senescence of NPCs associated with inflammation in IVDD. Furthermore, Toll-like receptor 4/nuclear factor-κB (TLR4/NF-κB) pathway plays a crucial role in regulating NPC senescence through FSTL1 regulation. Inhibition of TLR4 expression partly reversed the effects of rh-FSTL1 on NPC senescence-associated inflammation. Finally, rabbit IVDD model experiments demonstrated that the specific FSTL1 siRNA markedly repressed the development of IVDD. These findings may offer a therapeutic approach for mitigating inflammation-induced senescence associated with IVDD.

Diagnostic value of serum COMP and ADAMTS7 for intervertebral disc degeneration.

OBJECTIVE: Intervertebral disc degeneration (IVDD) is a major cause of morbidity and disability. Our study aimed to investigate the potential of cartilage oligomeric matrix protein (COMP) and ADAMTS7 (A disintegrin and metalloproteinases with thrombospondin motifs 7) as biomarkers for IVDD together with their functional relationship. METHODS: IVD tissues and peripheral blood samples were collected from IVDD rabbit models over 1-4 weeks. Tissues and blood samples were also collected from clinical patients those were stratified into four equal groups according to Pfirrmann IVDD grading (I-V) with baseline data collected for each participant. COMP and ADAMTS7 expression were analyzed and biomarker characteristics were assessed using linear regression and receiver operating curve (ROC) analyses. RESULTS: COMP and ADAMTS7 expression increased in tissues and serum during IVDD progression. Serum COMP (sCOMP) and serum ADAMTS7 (sADAMTS7) levels increased in a time-dependent manner following IVD damage in the rabbit model while significant positive correlations were detected between sCOMP and sADAMTS7 and Pfirrmann grade in human subjects. ROC analysis showed that combining sCOMP and sADAMTS7 assay results produced an improved diagnostic measure for IVDD compared to individual sCOMP or sADAMTS7 tests. In vitro assays conducted on human cell isolates revealed that COMP prevented extracellular matrix degradation and antagonized ADAMTS7 expression although this protective role was uncoupled under microenvironmental conditions mimicking IVDD. CONCLUSIONS: Increases in circulating COMP and ADAMTS7 correlate with IVDD progression and may play regulatory roles. Assays for sCOMP and/or sADAMTS7 levels can discriminate between healthy subjects and IVDD patients, warranting further clinical assessment.

Comparative effectiveness of nonpharmacological interventions in reducing psychological symptoms among patients with chronic low back pain.

OBJECTIVES: Chronic low back pain (CLBP) can seriously impair the quality of life of patients and has a remarkable comorbidity with psychological symptoms, which, in turn, can further exacerbate the symptoms of CLBP. Psychological treatments are critical and nonnegligent for the management of CLBP, and thus, should attract sufficient attention. However, current evidence does not suggest the superiority and effectiveness of nonpharmacological interventions in reducing psychological symptoms among patients with CLBP.Thus, this study was designed to compare the effectiveness of nonpharmacological interventions for depression, anxiety, and mental health among patients with CLBP and to recommend preferred strategies for attenuating psychological symptoms in clinical practice. METHODS: In this systematic review and network meta-analysis (NMA), PubMed, Embase Database, Web of Science, and Cochrane Library were searched from database inception until March 2022. Randomized clinical trials (RCTs) that compare different nonpharmacological interventions for depression, anxiety, and mental health among patients with CLBP were eligible. The Preferred Reporting Items for Systematic Reviews and Meta-analyses statement was used. Four reviewers in pairs and divided into two groups independently performed literature selection, data extraction, and risk of bias, and certainty of evidence assessments. This NMA was conducted with a random effects model under a frequentist framework. The major outcomes were depression, anxiety, and mental health presented as the standardized mean difference (SMD) with the corresponding 95% CI. RESULTS: A total of 66 RCTs that randomized 4806 patients with CLBP met the inclusion criteria. The quality of evidence was typically low or some risks of bias (47 out of 66 trials, 71.3%), and the precision of summary estimates for effectiveness varied substantially. In addition, 7 categories of interventions with 26 specific treatments were evaluated. For depression, mind body therapy (pooled SMD = -1.20, 95% CI: -1.63 to -0.78), biopsychosocial approach (pooled SMD = -0.41, 95% CI: -0.70 to -0.12), and physical therapy (pooled SMD = -0.26, 95% CI: -0.50 to -0.02) exhibited remarkable effectiveness in reducing depression compared with the control group. For managing anxiety, mind body therapy (pooled SMD = -1.35, 95% CI: -1.90 to -0.80), multicomponent intervention (pooled SMD = -0.47, 95% CI: -0.88 to -0.06), and a biopsychosocial approach (pooled SMD = -0.46, 95% CI: -0.79 to -0.14) were substantially superior to the control group. For improving mental health, multicomponent intervention (pooled SMD = 0.77, 95% CI: 0.14 to 1.39), exercise (pooled SMD = 0.60, 95% CI: 0.08 to 1.11), and physical therapy (pooled SMD = 0.47, 95% CI: 0.02-0.92) demonstrated statistically substantial effectiveness compared with the control group. The rank probability indicated that mind body therapy achieved the highest effectiveness in reducing depression and anxiety among patients with CLBP. Besides, the combined results should be interpreted cautiously based on the results of analyses evaluating the inconsistency and certainty of the evidence. CONCLUSION: This systemic review and NMA suggested that nonpharmacological interventions show promise for reducing psychological symptoms among patients with CLBP. In particular, mind body therapy and a biopsychosocial approach show considerable promise, and mind body therapy can be considered a priority choice in reducing depression and anxiety. These findings can aid clinicians in assessing the potential risks and benefits of available treatments for CLBP comorbidity with psychological symptoms and provide evidence for selecting interventions in clinical practice. More RCTs involving different interventions with rigorous methodology and an adequate sample size should be conducted in future research.