Accessing Functionalized Ultra-High Molecular Weight Poly(α-olefin)s via Hafnium-Mediated Highly Isospecific Copolymerization.

Inspired by the favorable impact of heteroatom-containing groups in phenoxy-imine titanium and late transition metal catalysts, a series of novel pyridylamido hafnium catalysts bearing ─OMe (Cat-OMe), ─CF3 (Cat-CF3), and ─C6F5 (Cat-C6F5) substituents are designed and synthesized. Together with the established hafnium catalysts Cat-H and Cat-iPr by Dow/Symyx, these catalysts are applied in the polymerization of α-olefins, including 1-hexene, 1-octene, and 4M1P, as well as in the copolymerization of these α-olefins with a specifically designed polar monomer. The enhancement of polymer molecular weight derived from catalyst modification and the incorporation of polar monomers is discussed in detail. Notably, the new catalysts are all highly active for α-olefins polymerization, with catalyst Cat-CF3 producing isotactic polymers with the highest molecular weight (Mw = 1649 kg mol-1); in copolymerization with polar monomers, catalyst Cat-OMe yields isotactic copolymer with the highest molecular weight (Mw = 2990 kg mol-1). Interestingly, catalyst Cat-C6F5 bearing a ─C6F5 group in the N-aryl moiety gives rise to poly(α-olefin) with reduced stereoselectivity. The findings of this study underscore the potential of heteroatom-containing groups in the development of early transition metal catalysts and the synthesis of polymer with novel structures.

Aqueous Coordination-Insertion Copolymerization for Producing High Molecular Weight Polar Polyolefins.

Hydrocarbons, when used as the medium for transition metal catalyzed organic reactions and olefin (co-)polymerization, are ubiquitous. Environmentally friendly water is highly attractive and long-sought, but is greatly challenging as coordination-insertion copolymerization reaction medium of olefin and polar monomers. Unfavorable interactions from both water and polar monomer usually lead to either catalyst deactivation or the formation of low-molecular-weight polymers. Herein, we develop well-behaved neutral phosphinophenolato nickel catalysts, which enable aqueous copolymerization of ethylene and diverse polar monomers to produce significantly high-molecular-weight linear polar polyolefins (219-549 kDa, 0.13-1.29 mol %) in a single-component fashion under mild conditions for the first time. These copolymerization reactions occur better in water than in hydrocarbons such as toluene. The dual characteristics of high molecular weight and the incorporation of a small amount of functional group result in improved surface properties while retain the desirable intrinsic properties of high-density polyethylene (HDPE).

Unsymmetrical Strategy on α-Diimine Nickel and Palladium Mediated Ethylene (Co)Polymerizations.

Among various catalyst design strategies used in the α-diimine nickel(II) and palladium(II) catalyst systems, the unsymmetrical strategy is an effective and widely utilized method. In this contribution, unsymmetrical nickel and palladium α-diimine catalysts (Ipty/iPr-Ni and Ipty/iPr-Pd) derived from the dibenzobarrelene backbone were constructed via the combination of pentiptycenyl and diisopropylphenyl substituents, and investigated toward ethylene (co)polymerization. Both of these catalysts were capable of polymerizing ethylene in a broad temperature range of 0-120 °C, in which Ipty/iPr-Ni could maintain activity in the level of 106 g mol-1 h-1 even at 120 °C. The branching densities of polyethylenes generated by both nickel and palladium catalysts could be modulated by the reaction temperature. Compared with symmetrical Ipty-Ni and iPr-Ni, Ipty/iPr-Ni exhibited the highest activity, the highest polymer molecular weight, and the lowest branching density. In addition, Ipty/iPr-Pd could produce copolymers of ethylene and methyl acrylate, with the polar monomer incorporating both on the main chain and the terminal of branches. Remarkably, the ratio of the in-chain and end-chain polar monomer incorporations could be modulated by varying the temperature.

Suppression of Chain Transfer at High Temperature in Catalytic Olefin Polymerization.

Living polymerization by suppressing chain transfer is a very useful method for achieving precise molecular weight and structure control. However, the suppression of chain transfer at high temperatures is extremely challenging in any catalytic polymerization. This has been a severe limitation for catalytic olefin polymerization, which is one of the most important chemical reactions. Here, we report the unprecedented living polymerization of ethylene at 130 °C, with a narrow molecular weight distribution range of 1.04 to 1.08. This is a significant increase in the reaction temperature. Tailor-made α-diimine nickel catalysts that exhibit both the steric shielding and fluorine effects play an essential role in this breakthrough. These nickel catalysts are even active at 200 °C, and enable the formation of semi-crystalline, ultrahigh-molecular-weight polyethylene at 150 °C. Mechanistic insights into the key chain transfer reaction are elucidated by density functional theory calculations.

Fluorinated α-Diimine Nickel Mediated Ethylene (Co)Polymerization.

Fluorine substituents in transition metal catalysts are of great importance in olefin polymerization catalysis; however, the comprehensive effect of fluorine substituents is elusive in seminal late transition metal α-diimine catalytic system. In this contribution, fluorine substituents at various positions (ortho-, meta-, and para-F) and with different numbers (Fn ; n=0, 1, 2, 3, 5) were installed into the well-defined N-terphenyl amine and thus were studied for the first time in the nickel α-diimine promoted ethylene polymerization and copolymerization with polar monomers. The position of the fluorine substituent was particularly crucial in these polymerization reactions in terms of catalytic activity, polymer molecular weight, branching density, and incorporation of polar monomer, and thus a picture on the fluorine effect was given. As a notable result, the ortho-F substituted α-diimine nickel catalyst produced highly linear polyethylenes with an extremely high molecular weight (Mw =8703 kDa) and a significantly low degree of branching of 1.4/1000 C; however, the meta-F and/or para-F substituted α-diimine nickel catalysts generated highly branched (up to 80.2/1000 C) polyethylenes with significantly low molecular weights (Mw =20-50 kDa).

Efficient Suppression of Chain Transfer and Branching via Cs -Type Shielding in a Neutral Nickel(II) Catalyst.

An effective shielding of both apical positions of a neutral NiII active site is achieved by dibenzosuberyl groups, both attached via the same donors' N-aryl group in a Cs -type arrangement. The key aniline building block is accessible in a single step from commercially available dibenzosuberol. This shielding approach suppresses chain transfer and branch formation to such an extent that ultrahigh molecular weight polyethylenes (5×106  g mol-1 ) are accessible, with a strictly linear microstructure (<0.1 branches/1000C). Key features of this highly active (4.3×105  turnovers h-1 ) catalyst are an exceptionally facile preparation, thermal robustness (up to 90 °C polymerization temperature), ability for living polymerization and compatibility with THF as a polar reaction medium.

Ultrahigh Branching of Main-Chain-Functionalized Polyethylenes by Inverted Insertion Selectivity.

Branched polyolefin microstructures resulting from so-called "chain walking" are a fascinating feature of late transition metal catalysts; however, to date it has not been demonstrated how desirable branched polyolefin microstructures can be generated thereby. We demonstrate how highly branched polyethylenes with methyl branches (220 Me/1000 C) exclusively and very high molecular weights (ca. 106  g mol-1 ), reaching the branch density and microstructure of commercial ethylene-propylene elastomers, can be generated from ethylene alone. At the same time, polar groups on the main chain can be generated by in-chain incorporation of methyl acrylate. Key to this strategy is a novel rigid environment in an α-diimine PdII catalyst with a steric constraint that allows for excessive chain walking and branching, but restricts branch formation to methyl branches, hinders chain transfer to afford a living polymerization, and inverts the regioselectivity of acrylate insertion to a 1,2-mode.

CO-Reduction Chemistry: Reaction of a CO-Derived Formylhydridoborate with Carbon Monoxide, with Carbon Dioxide, and with Dihydrogen.

Treatment of the bulky metallocene hydride Cp*2Zr(H)OMes (Cp* = pentamethylcyclopentadienyl, Mes = mesityl) with Piers' borane [HB(C6F5)2] and carbon monoxide (CO) gave the formylhydridoborate complex [Zr]-O═CH-BH(C6F5)2 ([Zr] = Cp*2Zr-OMes). From the dynamic NMR behavior, its endergonic equilibration with the [Zr]-O-CH2-B(C6F5)2 isomer was deduced, which showed typical reactions of an oxygen/boron frustrated Lewis pair. It was trapped with CO to give an O-[Zr] bonded borata-ß-lactone. Trapping with carbon dioxide (CO2) gave the respective O-[Zr] bonded cyclic boratacarbonate product. These reaction pathways were analyzed by density functional theory calculation. The formylhydridoborate complex was further reduced by dihydrogen via two steps; it reacted rapidly with H2 to give Cp*2Zr(OH)OMes and H3C-B(C6F5)2, which then slowly reacted further with H2 to eventually give [Zr]-O(H)-B(H)(C6F5)2 and methane (CH4). Most complexes were characterized by X-ray diffraction.

Direct Synthesis of Imidazolium-Functional Polyethylene by Insertion Copolymerization.

Cationic imidazolium-functionalized polyethylene is accessible by insertion copolymerization of ethylene and allyl imidazolium tetrafluoroborate (AIm-BF4 ) with phosphinesulfonato palladium(II) catalyst precursors. Imidazolium-substituted repeat units are incorporated into the main chain and the initiating saturated chain end of the linear polymers, rather than the terminating unsaturated chain end. The counterion of the allyl imidazolium monomer is decisive, with the chloride analogue (AIm-Cl) no polymerization is observed. Stoichiometric studies reveal the formation of an inactive chloride complex from the catalyst precursor. An effect of moderate densities (0.5 mol%) of ionic groups on the copolymers' physical properties is exemplified by an enhanced wetting by water.

Direct Synthesis of Telechelic Polyethylene by Selective Insertion Polymerization.

A single-step route to telechelic polyethylene (PE) is enabled by selective insertion polymerization. PdII -catalyzed copolymerization of ethylene and 2-vinylfuran (VF) generates α,ω-di-furan telechelic polyethylene. Orthogonally reactive exclusively in-chain anhydride groups are formed by terpolymerization with carbic anhydride. Combined experimental and theoretical DFT studies reveal the key for this direct approach to telechelics to be a match of the comonomers' different electronics and bulk. Identified essential features of the comonomer are that it is an electron-rich olefin that forms an insertion product stabilized by an additional interaction, namely a π-η3 interaction for the case of VF.

Suppression of chain transfer in catalytic acrylate polymerization via rapid and selective secondary insertion.

In catalytic copolymerization, undesired chain transfer after incorporation of a polar vinyl monomer is a fundamental problem. We show an approach to overcome this problem by a fast consecutive insertion. The second double bond of acrylic anhydride rapidly inserts intramolecularly to regio- and stereoselectively form a cyclic repeat unit and a primary alkyl favorable for chain growth (>96%). This results in significantly enhanced copolymer molecular weights vs monofunctional acrylate monomers.

Insights into functional-group-tolerant polymerization catalysis with phosphine-sulfonamide palladium(II) complexes.

Two series of cationic palladium(II) methyl complexes {[(2-MeOC6 H4 )2 PC6 H4 SO2 NHC6 H3 (2,6-R(1) ,R(2) )]PdMe}2 [A]2 ((X) 1(+) -A: R(1) =R(2) =H: (H) 1(+) -A; R(1) =R(2) =CH(CH3 )2 : (DIPP) 1(+) -A; R(1) =H, R(2) =CF3 : (CF3) 1(+) -A; A=BF4 or SbF6 ) and neutral palladium(II) methyl complexes {[(2-MeOC6 H4 )2 PC6 H4 SO2 NC6 H3 (2,6-R(1) ,R(2) )]PdMe(L)} ((X) 1-acetone: L=acetone; (X) 1-dmso: L=dimethyl sulfoxide; (X) 1-pyr: L=pyridine) chelated by a phosphine-sulfonamide were synthesized and fully characterized. Stoichiometric insertion of methyl acrylate (MA) into all complexes revealed that a 2,1 regiochemistry dominates in the first insertion of MA. Subsequently, for the cationic complexes (X) 1(+) -A, ß-H elimination from the 2,1-insertion product (X) 2(+) -AMA-2,1 is overwhelmingly favored over a second MA insertion to yield two major products (X) 4(+) -AMA-1,2 and (X) 5(+) -AMA . By contrast, for the weakly coordinated neutral complexes (X) 1-acetone and (X) 1-dmso, a second MA insertion of the 2,1-insertion product (X) 2MA-2,1 is faster than ß-H elimination and gives (X) 3MA as major products. For the strongly coordinated neutral complexes (X) 1-pyr, no second MA insertion and no ß-H elimination (except for (DIPP) 2-pyrMA-2,1 ) were observed for the 2,1-insertion product (X) 2-pyrMA-2,1 . The cationic complexes (X) 1(+) -A exhibited high catalytic activities for ethylene dimerization, affording butenes (C4 ) with a high selectivity of up to 97.7 % (1-butene: 99.3 %). Differences in activities and selectivities suggest that the phosphine-sulfonamide ligands remain coordinated to the metal center in a bidentate fashion in the catalytically active species. By comparison, the neutral complexes (X) 1-acetone, (X) 1-dmso, and (X) 1-pyr showed very low activity towards ethylene to give traces of oligomers. DFT analyses taking into account the two possible coordination modes (O or N) of the sulfonamide ligand for the cationic system (CF3) 1(+) suggested that the experimentally observed high activity in ethylene dimerization is the result of a facile first ethylene insertion into the O-coordinated PdMe isomer and a subsequent favored ß-H elimination from the N-coordinated isomer formed by isomerization of the insertion product. Steric hindrance by the N-aryl substituent in the neutral systems (CF3) 1 and (H) 1 appears to contribute significantly to a higher barrier of insertion, which accounts for the experimentally observed low activity towards ethylene oligomerization.

Insertion Homo- and Copolymerization of Diallyl Ether.

The previously unresolved issue of polymerization of allyl monomers CH2 CHCH2 X is overcome by a palladium-catalyzed insertion polymerization of diallyl ether as a monomer. An enhanced 2,1-insertion of diallyl ether as compared to mono-allyl ether retards the formation of an unreactive five-membered cyclic O-chelate (after 1,2-insertion) that otherwise hinders further polymerization, and also enhances incorporation in ethylene polymers (20.4 mol %). Cyclic ether repeat units are formed selectively (96 %-99 %) by an intramolecular insertion of the second allyl moiety of the monomer. These features even enable a homopolymerization to yield polymers (poly-diallyl ether) with degrees of polymerization of DPn ≈44.

High-Refractive-Index Cross-Linked Cyclic Olefin Polymers with Excellent Transparency via Thiol-Ene Click Reaction.

High-refractive-index polymers are important optical materials in optoelectronics. Conventional cyclic olefin polymers (COPs), possessing many excellent optical properties, are a class of highly promising optical materials; however, one of the greatest obstacles is their low refractive index of n = 1.52-1.54. Here, one efficient strategy of first incorporating high molar refraction groups, including carbazolyl and indolyl moieties, into unsaturated COPs via ring-opening metathesis polymerization (ROMP) and then introducing another high molar refraction sulfur atom by a subsequent thiol-ene click reaction is presented. The obtained cross-linked COPs bearing both an aromatic group and sulfur possess significantly higher refractive indices (n = 1.611-1.684 at 589 nm) and highly optical transparency (approximately 95%) in the range of vis-NIR. This provides a way toward potential applications of new-generation optical materials.

Polar-Functionalized Polyethylenes Enabled by Palladium-Catalyzed Copolymerization of Ethylene and Butadiene/Bio-Based Alcohol-Derived Monomers.

Polar-functionalized polyolefins are high-value materials with improved properties. However, their feedstocks generally come from non-renewable fossil products; thus, it requires the development of renewable bio-based monomers to produce functionalized polyolefins. In this contribution, via the Pd-catalyzed telomerization of 1,3-butadiene and three types of bio-based alcohols (furfuryl alcohol, tetrahydrofurfuryl alcohol, and solketal), 2,7-octadienyl ether monomers including OC8-FUR, OC8-THF, and OC8-SOL were synthesized and characterized, respectively. The copolymerization of these monomers with ethylene catalyzed by phosphine-sulfonate palladium catalysts was further investigated. Microstructures of the resultant copolymers were analyzed by NMR and ATR-IR spectroscopy, revealing linear structures with incorporations of difunctionalized side chains bearing both allyl ether units and polar cyclic groups. Mechanical property studies exhibited better strain-at-break of these copolymers compared to the non-polar polyethylene, among which the copolymer E-FUR with the incorporation of 0.3 mol% displayed the highest strain-at-break and stress-at-break values of 940% and 35.9 MPa, respectively.

Cyclic Olefin Terpolymers with High Refractive Index and High Optical Transparency.

Cyclic olefin copolymer (COC) is one of the most promising optical materials; however, the brittle COC suffers from issues including a low refractive index. In this contribution, by the introduction of high refractive index comonomers including phenoxy substituted α-olefin (C4OAr), p-tolylthio substituted α-olefin (C4SAr) and carbazolyl substituted α-olefins (C4NAr, C3NAr, and C2NAr), the zirconocene mediated terpolymerization of ethylene (E) and tetracyclododecene (TCD) produces the preferred E-TCD-CnNAr (n = 2, 3, and 4) cyclic olefin terpolymers (COT) with tunable compositions (TCD: 11.5- 35.8 mol %, CnNAr: 1.2-5.0 mol %), high molecular weights and high glass transition temperatures (up to 167 °C) in high catalytic activities. Compared to the E-TCD copolymer (COC) material, these COT materials show the comparable thermal decomposition temperature (Td,5% = 437 °C), slightly higher strain at break value (up to 7.4%) and higher tensile strength (up to 60.5 MPa). In particular, these noncrystalline optical COT materials have significantly higher refractive indices of 1.550-1.569 and are more transparent (transmittance: 93-95%), relative to the COC materials, indicative of an excellent optical material.

Photodegradable polar-functionalized polyethylenes.

The degradation of plastics has attracted much attention from the global community. Polyethylenes (PEs), as the most abundant synthetic plastics, are most frequently studied. PE is non-degradable and non-polar because of the sole presence of the pure hydrocarbon components. Concurrent incorporation of both in-chain cleavable and functional groups into the PE chain is an effective pathway to overcome the non-degradable and non-polar issue; however, the method for achieving this pathway remains elusive. Here, we report a strictly non-alternating (>99%) terpolymerization of ethylene with CO and fundamental polar monomers via a coordination-insertion mechanism using late transition metal catalysts, which effectively prevents the formation of undesired chelates originating from both co-monomers under a low CO concentration. High-molecular-weight linear PEs with both in-chain isolated keto (>99%) and main-chain functional groups are prepared. The incorporation of key low-content isolated keto groups makes PEs photodegradable while retaining their desirable bulk material properties, and the introduction of polar functional groups considerably improves their surface properties.

Rare-earth-metal-hydrocarbyl complexes bearing linked cyclopentadienyl or fluorenyl ligands: synthesis, catalyzed styrene polymerization, and structure-reactivity relationship.

A series of rare-earth-metal-hydrocarbyl complexes bearing N-type functionalized cyclopentadienyl (Cp) and fluorenyl (Flu) ligands were facilely synthesized. Treatment of [Y(CH(2)SiMe(3))(3)(thf)(2)] with equimolar amount of the electron-donating aminophenyl-Cp ligand C(5)Me(4)H-C(6)H(4)-o-NMe(2) afforded the corresponding binuclear monoalkyl complex [({C(5)Me(4)-C(6)H(4)-o-NMe(µ-CH(2))}Y{CH(2)SiMe(3)})(2)] (1a) via alkyl abstraction and C-H activation of the NMe(2) group. The lutetium bis(allyl) complex [(C(5)Me(4)-C(6)H(4)-o-NMe(2))Lu(η(3)-C(3)H(5))(2)] (2b), which contained an electron-donating aminophenyl-Cp ligand, was isolated from the sequential metathesis reactions of LuCl(3) with (C(5)Me(4)-C(6)H(4)-o-NMe(2))Li (1 equiv) and C(3)H(5)MgCl (2 equiv). Following a similar procedure, the yttrium- and scandium-bis(allyl) complexes, [(C(5)Me(4)-C(5)H(4)N)Ln(η(3)-C(3)H(5))(2)] (Ln=Y (3a), Sc (3b)), which also contained electron-withdrawing pyridyl-Cp ligands, were also obtained selectively. Deprotonation of the bulky pyridyl-Flu ligand (C(13)H(9)-C(5)H(4)N) by [Ln(CH(2)SiMe(3))(3)(thf)(2)] generated the rare-earth-metal-dialkyl complexes, [(η(3)-C(13)H(8)-C(5)H(4)N)Ln(CH(2)SiMe(3))(2)(thf)] (Ln=Y (4a), Sc (4b), Lu (4c)), in which an unusual asymmetric η(3)-allyl bonding mode of Flu moiety was observed. Switching to the bidentate yttrium-trisalkyl complex [Y(CH(2)C(6)H(4)-o-NMe(2))(3)], the same reaction conditions afforded the corresponding yttrium bis(aminobenzyl) complex [(η(3)-C(13)H(8)-C(5)H(4)N)Y(CH(2)C(6)H(4)-o-NMe(2))(2)] (5). Complexes 1-5 were fully characterized by (1)H and (13)C NMR and X-ray spectroscopy, and by elemental analysis. In the presence of both [Ph(3)C][B(C(6)F(5))(4)] and AliBu(3), the electron-donating aminophenyl-Cp-based complexes 1 and 2 did not show any activity towards styrene polymerization. In striking contrast, upon activation with [Ph(3)C][B(C(6)F(5))(4)] only, the electron-withdrawing pyridyl-Cp-based complexes 3, in particular scandium complex 3b, exhibited outstanding activitiy to give perfectly syndiotactic (rrrr >99%) polystyrene, whereas their bulky pyridyl-Flu analogues (4 and 5) in combination with [Ph(3)C][B(C(6)F(5))(4)] and AliBu(3) displayed much-lower activity to afford syndiotactic-enriched polystyrene.

Selective branch formation in ethylene polymerization to access precise ethylene-propylene copolymers.

Polyolefins with branches produced by ethylene alone via chain walking are highly desired in industry. Selective branch formation from uncontrolled chain walking is a long-standing challenge to generate exclusively branched polyolefins, however. Here we report such desirable microstructures in ethylene polymerization by using sterically constrained α-diimine nickel(II)/palladium(II) catalysts at 30 °C-90 °C that fall into industrial conditions. Branched polyethylenes with exclusive branch pattern of methyl branches (99%) and notably selective branch distribution of 1,4-Me2 unit (86%) can be generated. The ultrahigh degree of branching (>200 Me/1000 C) enables the well-defined product to mimic ethylene-propylene copolymers. More interestingly, branch distribution is predictable and computable by using a simple statistical model of p(1-p)n (p: the probability of branch formation). Mechanistic insights into the branch formation including branch pattern and branch distribution by an in-depth density functional theory (DFT) calculation are elucidated.

An unusual organoyttrium alkyl complex containing a [C5HMe3(η(3)-CH2)-C5H4N-κ]- ligand and an elusive cyclopentadienide-based scandium tuck-over zwitterion obtained by C-H bond activation.

The acid-base reaction between Y(CH(2)SiMe(3))(3)(thf)(2) and the pyridyl-functionalized cyclopentadienyl (Cp) ligand C(5)Me(4)H-C(5)H(4)N (1 equiv) at 0 °C afforded a mixture of two products: (η(5):κ-C(5)Me(4)-C(5)H(4)N)Y(CH(2)SiMe(3))(2)(thf) (1 a) and (η(5):κ-C(5)Me(4)-C(5)H(4)N)(2)YCH(2)SiMe(3) (1 b), in a 5:2 ratio. Addition of the same ligand (2 equiv) to Y(CH(2)SiMe(3))(3)(thf)(2), however, generated 1 b together with the novel complex 1 c, the first well defined yttrium mono(alkyl) complex (η(5):κ-C(5)Me(4)-C(5)H(4)N)[C(5)HMe(3)(η(3)-CH(2))-C(5)H(4)N-κ]Y(CH(2)SiMe(3)) containing a rare κ/η(3)-allylic coordination mode in which the C-H bond activation occurs unexpectedly with the allylic methyl group rather than conventionally on Cp ring. If the central metal was changed to lutetium, the equimolar reaction between Lu(CH(2)SiMe(3))(3)(thf)(2) and C(5)Me(4)H-C(5)H(4)N exclusively afforded the bis(alkyl) product (η(5):κ-C(5)Me(4)-C(5)H(4)N)Lu(CH(2)SiMe(3))(2)(thf) (2 a). Similarly, the reaction between the ligand (2 equiv) and Lu(CH(2)SiMe(3))(3)(thf)(2) gave the mono(alkyl) complex (η(5):κ-C(5)Me(4)-C(5)H(4)N)(2)LuCH(2)SiMe(3) (2 b), in which no ligand redistribution was observed. Strikingly, treatment of Sc(CH(2)SiMe(3))(3)(thf)(2) with C(5)Me(4)H-C(5)H(4)N in either 1:1 or 1:2 ratio at 0 °C generated the first cyclopentadienide-based scandium zwitterionic "tuck-over" complex 3, (η(5):κ-C(5)Me(4)-C(5)H(4)N)Sc(thf)[µ-η(5):η(1):κ-C(5)Me(3)(CH(2))-C(5)H(4)N]Sc(CH(2)SiMe(3))(3). In the zwitterion, the dianionic ligand [C(5)Me(3)(CH(2))-C(5)H(4)N](2-) binds both to Sc1(3+) and to Sc2(3+), in η(5) and η(1)/κ modes. In addition, the reaction chemistry, the molecular structures, and the mechanism are also discussed in detail.