(Bi,Sb)2 Se3 Alloy Thin Film for Short-Wavelength Infrared Photodetector and TFT Monolithic-Integrated Matrix Imaging.

Short-wavelength infrared photodetectors play a significant role in various fields such as autonomous driving, military security, and biological medicine. However, state-of-the-art short-wavelength infrared photodetectors, such as InGaAs, require high-temperature fabrication and heterogenous integration with complementary metal-oxide-semiconductor (CMOS) readout circuits (ROIC), resulting in a high cost and low imaging resolution. Herein, for the first time, a low-cost, high-performance, high-stable, and thin-film transistor (TFT) ROIC monolithic-integrated (Bi,Sb)2 Se3 alloy thin-film short-wavelength infrared photodetector is reported. The (Bi,Sb)2 Se3 alloy thin-film short-wavelength infrared photodetectors demonstrate a high external quantum efficiency (EQE) of 21.1% (light intensity of 0.76 µW cm-2 ) and a fast response time (3.24 µs). The highest EQE is about two magnitudes than that of the extrinsic photoconduction of Sb2 Se3 (0.051%). In addition, the unpackaged devices demonstrate high electric and thermal stability (almost no attenuation at 120 °C for 312 h), showing potential for in-vehicle applications that may experient such a high temperature. Finally, both the (Bi,Sb)2 Se3 alloy thin film and n-type CdSe buffer layer are directly deposited on the TFT ROIC (with a 64 × 64-pixel array) with a low-temperature process and the material identification and imaging applications are presented. This work is a significant breakthrough in ROIC monolithic-integrated short-wavelength infrared imaging chips.

A meta-analysis examining the impact of open surgical therapy versus minimally invasive surgery on wound infection in females with cervical cancer.

A meta-analysis study was executed to measure the effect of minimally invasive surgery (MIS) and open surgical management (OSM) on wound infection (WI) in female's cervical cancer (CC). A comprehensive literature study till February 2023 was applied and 1675 interrelated investigations were reviewed. The 41 chosen investigations enclosed 10 204 females with CC and were in the chosen investigations' starting point, 4294 of them were utilizing MIS, and 5910 were utilizing OSM. Odds ratio (OR) in addition to 95% confidence intervals (CIs) were utilized to compute the value of the effect of MIS and OSM on WI in female's CC and by the dichotomous approaches and a fixed or random model. The MIS had significantly lower WI (OR, 0.23; 95% CI, 0.15-0.35, p < 0.001) with no heterogeneity (I2 = 0%) and postoperative aggregate complications (PACs) (OR, 0.49; 95% CI, 0.37-0.64, p < 0.001) in females with CC and compared OSM. However, MIS compared with OSM in females with CC and had no significant difference in pelvic infection and abscess (PIA) (OR, 0.59; 95% CI, 0.31-1.16, p = 0.13). The MIS had significantly lower WI, and PACs, though, had no significant difference in PIA in females with CC and compared with OSM. However, care must be exercised when dealing with its values because of the low sample size of some of the nominated investigations for the meta-analysis.

Hot Spot Engineering in Hierarchical Plasmonic Nanostructures.

The controllable nanogap structures offer an effective way to obtain strong and tunable localized surface plasmon resonance (LSPR). A novel hierarchical plasmonic nanostructure (HPN) is created by incorporating a rotating coordinate system into colloidal lithography. In this nanostructure, the hot spot density is increased drastically by the long-range ordered morphology with discrete metal islands filled in the structural units. Based on the Volmer-Weber growth theory, the precise HPN growth model is established, which guides the hot spot engineering for improved LSPR tunability and strong field enhancement. The hot spot engineering strategy is examined by the application of HPNs as the surface-enhanced Raman spectroscopy (SERS) substrate. It is universally suitable for various SERS characterization excited at different wavelengths. Based on the HPN and hot spot engineering strategy, single-molecule level detection and long-range mapping can be realized simultaneously. In that sense, it offers a great platform and guides the future design for various LSPR applications like surface-enhanced spectra, biosensing, and photocatalysis.

Giant Room-Temperature Electrocaloric Effect of Polymer-Ceramic Composites with Orientated BaSrTiO3 Nanofibers.

Cooling based on the electrocaloric effect (ECE) is a promising solution to environmental and energy efficiency problems of vapor-compression refrigeration. Ferroelectric polymer-ceramics nanocomposites, integrating high electric breakdown of organic ferroelectrics and large EC strength of ceramics, are attractive EC materials. Here, we tuned the orientation of Ba0.67Sr0.33TiO3 nanofibers (BST nfs) in the P(VDF-TrFE-CFE) polymer. When the nfs were aligned parallel to the field, a ΔT of 11.3 K with an EC strength of 0.16 K·m/MV was achieved in the blends. The EC strength not only surpasses advanced nanocomposites but also is comparable to ferroelectric ceramics. The simulation indicates that a significantly higher electric field is concentrated in polymer regions around the ends of the orientated nfs, contributing to easier flipping of polymer chains for large ECE. This work provides a new method to obtain large ECE in composites for next-generation refrigeration.

A New Endoplasmic Reticulum (ER)-Targeting Fluorescent Probe for the Imaging of Cysteine in Living Cells.

Cysteine (Cys) is an important endogenous amino acid and plays critical physiological roles in living systems. Herein, an endoplasmic reticulum (ER)-targeting fluorescent probe (FER-Cys) was designed and prepared for imaging of Cys in living cells. The probe FER-Cys consists of a fluorescein framework as the fluorescent platform, acrylate group as the response site for the selective recognition of Cys, and ER-specific p-toluenesulfonamide fragment. After the response of probe FER-Cys to Cys, a turn-on fluorescence signal at 546 nm could be detected obviously. The probe FER-Cys further shows desirable selectivity to Cys. Finally, the probe FER-Cys was proven to selectively detect Cys in live cells and successfully image the changes of Cys level in the cell models of H2O2-induced redox imbalance.

Ultrahigh Responsivity UV Photodetector Based on Cu Nanostructure/ZnO QD Hybrid Architectures.

Strong near-surface electromagnetic field formed by collective oscillation of electrons on Cu nanostructure a shows a strong dependence on geometry, offering a promising approach to boost the light absorption of ZnO photoactive layers with enhanced plasmon scattering. Here, a facile way to fabricate UV photodetectors with tunable configuration of the self-assembled Cu nanostructures on ZnO thin films is reported. The incident lights are effectively confined in ZnO photoactive layers with the existence of the uplayer Cu nanostructures, and the interdiffusion of Cu atoms during fabrication of the Cu nanostructures can improve the carrier transfer in ZnO thin films. The optical properties of the hybrid architectures are successfully tailored over a control of the geometric evolution of the Cu nanostructures, resulting in significantly enhanced photocurrent and responsivity of 2.26 mA and 234 A W-1 under a UV light illumination of 0.62 mW cm-2 at 10 V, respectively. The photodetectors also exhibit excellent reproducibility, stability, and UV-visible rejection ratio (R370 nm /R500 nm ) of ≈370, offering an approach of high-performance UV photodetectors for practical applications.

Expression and potential role of microRNA-29b in mouse early embryo development.

BACKGROUND/AIMS: MicroRNA-29b (miR29b) has been previously identified in early mouse embryos through miRNA microarray analysis. Recent research has indicated that miR29b participates in DNA methylation by regulating DNA methyltransferase 3a/3b (Dnmt3a/3b) expression. However, the expression pattern and biological function of miR29b in mouse preimplantation embryonic development remain unknown. METHODS: In this study, we examined the expression patterns of miR29b and Dnmt3a/3b in mouse early embryos at different developmental stages. Subsequently, expression and localization of DNMT3A/3B protein was analyzed in mouse early embryos by immunofluorescence staining. The biological function of miR29b in mouse early embryos was analyzed by microinjection of commercially available miRNA-specific inhibitors and mimics. RESULTS: Our data showed that Dnmt3a/3b mRNA expression is negatively regulated by miR29b in mouse early embryos. Immunofluorescence analysis revealed that DNMT3A/3B protein expression is predominantly localized within the nucleoplasm of embryos. Alterations to the activity of miR29b could change the DNA methylation levels in mouse preimplantation embryos and lead to a developmental blockade, from the morula to the blastocyst stage. CONCLUSION: These results indicated a role for the miR29b-Dnmt3a/3b-DNA methylation axis in mouse early embryonic development, and we provide evidence that miR29b is indispensable for mouse early embryonic development. This study contributes to a preliminary understanding of the role of miR29b during mouse embryonic development.

Substantially Enhanced Electrocaloric Effect in Ba(Zr0.2Ti0.8)O3 Lead-Free Ferroelectric Ceramics via Lattice Stress Engineering.

As an alternative to conventional vapor-compression refrigeration, cooling devices based on electrocaloric (EC) materials are environmentally friendly and highly efficient, which are promising in realizing solid-state cooling. Lead-free ferroelectric ceramics with competitive EC performance are urgently desirable for EC cooling devices. In the past few decades, constructing phase coexistence and high polarizability have been two crucial factors in optimizing the EC performance. Different from the external stress generated through heavy equipment and inner interface stress caused by complex interface structures, the internal lattice stress induced by ion substitution engineering is a relatively simple and efficient means to tune the phase structure and polarizability. In this work, we introduce low-radius Li+ into BaZr0.2Ti0.8O3 (BZT) to form a particular A-site substituted cell structure, leading to a change of the internal lattice stress. With the increase of lattice stress, the fraction of the rhombohedral phase in the rhombohedral-cubic (R-C) coexisting system and ferroelectricity are all pronouncedly enhanced for the Li2CO3-doped sample, resulting in the significant enhancement of saturated polarization (Ps) as well as EC performance [e.g., adiabatic temperature change (ΔT) and isothermal entropy change (ΔS)]. Under the same conditions (i.e., 333 K and 70 kV cm-1), the ΔT of 5.7 mol % Li2CO3-doped BZT is 1.37 K, which is larger than that of the pure BZT ceramics (0.61 K). Consequently, in cooperation with the great improvement of electric field breakdown strength (Eb) from 70 to 150 kV cm-1, 5.7 mol % Li2CO3-doped BZT achieved a large ΔT of 2.26 K at a temperature of 333 K, which is a competitive performance in the field of electrocaloric effect (ECE). This work provides a simple but effective approach to designing high-performance electrocaloric materials for next-generation refrigeration.

Enhanced Energy Storage Performance by A-B Site Ambipolar Co-Doping in Antiferroelectrics.

Antiferroelectric materials are promising to be used for power capacitive devices. To improve the energy storage performance, solid-solution and defect engineering are widely used to suppress the long-range order by introducing local heterogeneities. However, both methods generally deteriorate either the maximum polarization or breakdown electric field due to damaged intrinsic polarization or increased leakage. Here, we show that forming defect-dipole clusters by A-B site acceptor-donor co-doping in antiferroelectrics can comprehensively enhance the energy storage performance. We took the La-Mn co-doped (Pb0.9Ba0.04La0.04)(Zr0.65Sn0.3Ti0.05)O3 (PBLZST) as an example. For co-doping with unequal amounts, high dielectric loss, impurity phase, and decreased polarization were observed. By contrast, La and Mn in an equal amount of co-doping can significantly improve the overall energy storage performance. An over 48% increasement in both the maximum polarization (62.7 µC/cm2) and breakdown electric field (242.6 kV/cm) was obtained in 1 mol % La and 1 mol % Mn equally co-doped PBLZST, followed by a nearly two-time enhancement in Wrec (6.52 J/cm3) compared with that of the pure matrix. Moreover, a high energy storage efficiency of 86.3% with an enhanced temperature stability over a wide temperature range can be achieved. The defect-dipole clusters associated with charge-compensated co-doping are suggested to contribute to an enhanced dielectric permittivity, linear polarization behavior, and maximum polarization strength compared with that of the unequal co-doping cases. The defect-dipole clusters are suggested to couple with the host, leading to a high energy storage performance. The proposed strategy is believed to be applicable to modify the energy storage behavior of antiferroelectrics.

Thermoelectric coupling effect in BNT-BZT-xGaN pyroelectric ceramics for low-grade temperature-driven energy harvesting.

Pyroelectric energy harvesting has received increasing attention due to its ability to convert low-grade waste heat into electricity. However, the low output energy density driven by low-grade temperature limits its practical applications. Here, we show a high-performance hybrid BNT-BZT-xGaN thermal energy harvesting system with environmentally friendly lead-free BNT-BZT pyroelectric matrix and high thermal conductivity GaN as dopant. The theoretical analysis of BNT-BZT and BNT-BZT-xGaN with x = 0.1 wt% suggests that the introduction of GaN facilitates the resonance vibration between Ga and Ti, O atoms, which not only contributes to the enhancement of the lattice heat conduction, but also improves the vibration of TiO6 octahedra, resulting in simultaneous improvement of thermal conductivity and pyroelectric coefficient. Therefore, a thermoelectric coupling enhanced energy harvesting density of 80 µJ cm-3 has been achieved in BNT-BZT-xGaN ceramics with x = 0.1 wt% driven by a temperature variation of 2 oC, at the optical load resistance of 600 MΩ.

Molecular Ferroelectric Crystals with Superior Pyroelectricity, Plasticity, and Recyclability.

The pyroelectric effect is used in a wide range of applications such as infrared (IR) detection and thermal energy harvesting, which require the pyroelectric materials to simultaneously have a high pyroelectric coefficient and a low dielectric constant for high figures of merit. However, in conventional proper ferroelectrics, the positive correlation between the pyroelectric coefficient and the dielectric constant imposes an insurmountable challenge in upgrading the figures of merit. Here, we explored superior pyroelectricity in [(CH3)4N][FeCl4] (TMA-FC) and [(CH3)4N][FeCl3Br] (TMA-FCB) molecular ferroelectric plastic crystals, which could decouple this positive correlation due to the nature of improper polarization behavior. Therefore, TMA-FC and TMA-FCB derive a high pyroelectric coefficient and a low dielectric constant simultaneously, yielding record-high figures of merit around room temperature. Furthermore, the favorable plasticity enables ferroelectric crystals to attach surfaces with different shapes for device design and integration. More interestingly, the molecular ferroelectrics could be softened and reshaped at elevated temperatures without decay in pyroelectricity, making them recyclable for cost savings and e-waste reduction. Combined with the facile fabrication process, the findings of this work would open avenues for employing molecular ferroelectric plastic crystals in the manufacture of high-performance pyroelectric devices.

Fetal Cerebral Hemodynamic Changes in Preeclampsia Patients by Ultrasonic Imaging under Intelligent Algorithm.

This study was aimed at evaluating the adoption value of ultrasound imaging features on fetal cerebral hemodynamics in preeclampsia patients based on the partial difference algorithm and the hybrid segmentation network (HSegNet) algorithm. Forty pregnant women with preeclampsia diagnosed by ultrasound examination were selected as the research objects, and another forty normal pregnant women were selected as the control. Then, by using the partial differential algorithm, the imaging of fetal cerebral hemodynamics in preeclampsia patients was enhanced and optimized, and the general clinical data and experimental results were collected. The results showed that the automatic labeling of fetal cerebral artery in fetal middle cerebral artery (MCA) hemodynamic images was realized by HSegNet algorithm model, and the final accuracy was 97.3%, which had a good consistency with the manual annotation of doctors. Education level was a protective factor for preeclampsia (odds ratio (OR) = 0.535). Body mass index (BMI) and family history of hypertension during pregnancy were independent risk factors for preeclampsia (OR = 1.286, and 2.774, respectively). MCA end-diastolic volume (EDV) of preeclampsia fetuses was higher than that of normal fetuses. The MCA systolic-diastolic ratio (S/D), the pulsatility index (PI), and the resistive index (RI) in the preeclampsia group were significantly lower than those in the normal pregnancy group. The results showed that MCA PI, MCA RI, and MCA S/D had certain predictive values for the occurrence of adverse pregnancy outcomes (P < 0.05). In summary, the intelligent algorithm-based fetal MCA hemodynamic ultrasound image in the study could effectively predict pregnancy outcomes of patients and provide certain theoretical support for the subsequent reduction of adverse pregnancy outcomes in patients with preeclampsia.

A Biodegradable and Recyclable Piezoelectric Sensor Based on a Molecular Ferroelectric Embedded in a Bacterial Cellulose Hydrogel.

Currently, various electronic devices make our life more and more safe, healthy, and comfortable, but at the same time, they produce a large amount of nondegradable and nonrecyclable electronic waste that threatens our environment. In this work, we explore an environmentally friendly and flexible mechanical sensor that is biodegradable and recyclable. The sensor consists of a bacterial cellulose (BC) hydrogel as the matrix and imidazolium perchlorate (ImClO4) molecular ferroelectric as the functional element, the hybrid of which possesses a high sensitivity of 4 mV kPa-1 and a wide operational range from 0.2 to 31.25 kPa, outperforming those of most devices based on conventional functional biomaterials. Moreover, the BC hydrogel can be fully degraded into glucose and oligosaccharides, while ImClO4 can be recyclable and reused for the same devices, leaving no environmentally hazardous electronic waste.

High Energy Storage Performance of PMMA Nanocomposites Utilizing Hierarchically Structured Nanowires Based on Interface Engineering.

To overcome the inherent high hysteresis loss of ferroelectric polymer-based nanocomposites, non-ferroelectric linear dielectric poly(methyl methacrylate) (PMMA) is adopted as the polymer matrix for high discharge efficiency. At the same time, slender ferroelectric BaTiO3 nanowires (BT NWs) with a high dielectric constant are selected as the nanofiller for high energy density. To avoid the agglomeration of BT NWs and enhance the strength of interfaces, dopamine is used as organic coatings to tailor the interface. The BT@dopa NWs/PMMA nanocomposites exhibit excellent interface compatibility between the BT NWs and PMMA matrix and a very good microstructure uniformity. Based on this, hierarchically structured BT@SiO2@dopa NWs are designed and prepared to overcome the uneven electric field distribution at the interface, resulting from the dielectric constant mismatch. The discharged energy density (Ue) can be largely enhanced from 3.76 J/cm3 for pure PMMA films to 11.78 J/cm3 for PMMA-based nanocomposites by incorporating 5.0 wt % BT@SiO2@dopa NWs. In addition, a high discharging efficiency (η) of 91% is obtained simultaneously in the nanocomposites. Both experimental and theoretical simulations demonstrate that the double core-shell structure nanowire fillers can effectively alleviate the local field distortion, inhibit leakage current, and suppress remnant electric displacement, leading to the high Ue and η. These findings are significant in facilitating the development of high-performance film dielectric capacitor materials using PMMA-based nanocomposites toward high energy storage density.

Molecular Ferroelectric-Based Flexible Sensors Exhibiting Supersensitivity and Multimodal Capability for Detection.

Although excellent dielectric, piezoelectric, and pyroelectric properties matched with or even surpassing those of ferroelectric ceramics have been recently discovered in molecular ferroelectrics, their successful applications in devices are scarce. The fracture proneness of molecular ferroelectrics under mechanical loading precludes their applications as flexible sensors in bulk crystalline form. Here, self-powered flexible mechanical sensors prepared from the facile deposition of molecular ferroelectric [C(NH2 )3 ]ClO4 onto a porous polyurethane (PU) matrix are reported. [C(NH2 )3 ]ClO4 -PU is capable of detecting pressure of 3 Pa and strain of 1% that are hardly accessible by the state-of-the-art piezoelectric, triboelectric, and piezoresistive sensors, and presents the ability of sensing multimodal mechanical forces including compression, stretching, bending, shearing, and twisting with high cyclic stability. This scaling analysis corroborated with computational modeling provides detailed insights into the electro-mechanical coupling and establishes rules of engineering design and optimization for the hybrid sponges. Demonstrative applications of the [C(NH2 )3 ]ClO4 -PU array suggest potential uses in interactive electronics and robotic systems.

Template-Free Construction of Tin Oxide Porous Hollow Microspheres for Room-Temperature Gas Sensors.

Porous hollow microsphere (PHM) materials represent ideal building blocks for realizing diverse functional applications such as catalysis, energy storage, drug delivery, and chemical sensing. This has stimulated intense efforts to construct metal oxide PHMs for achieving highly sensitive and low-power-consumption semiconductor gas sensors. Conventional methods for constructing PHMs rely on delicate reprogramming of templates and may suffer from the structural collapse issue during the removal of templates. Here, we propose a template-free method for the construction of tin oxide (SnO2) PHMs via the competition between the solvent evaporation rate and the phase separation dynamics of colloidal SnO2 quantum wires. The SnO2 PHMs (typically 3 ± 0.5 µm diameter and approximately 200 nm shell thickness) exhibit desirable structural stability with desirable processing compatibility with various substrates. This enables the realization of NO2 gas sensors having a superior response and recovery process at room temperature. The superior NO2-sensing characteristic is attributed to the effective gas adsorption competition on solid surfaces benefiting from efficient diffusion channels, enhancing the interaction of metal oxide solids with gas molecules in terms of the receptor function, transducer function, and utility factor. In addition, the one-step deposition of SnO2 PHMs directly onto device substrates simplifies the fabrication conditions for semiconductor gas sensors. The desirable structural stability of PHMs combined with the functional diversity of metal oxides may open new opportunities for the design of functional materials and devices.

Improper molecular ferroelectrics with simultaneous ultrahigh pyroelectricity and figures of merit.

Although ferroelectric materials exhibit large pyroelectric coefficients, their pyroelectric figures of merit (FOMs) are severely limited by their high dielectric constants because of the inverse relationship between FOMs and dielectric constant. Here, we report the molecular ferroelectric [Hdabco]ClO4 and [Hdabco]BF4 (dabco = diazabicyclo[2.2.2]octane) exhibiting improper ferroelectric behavior and pyroelectric FOMs outperforming the current ferroelectrics. Concurrently, the improper molecular ferroelectrics have pyroelectric coefficients that are more than one order of magnitude greater than the state-of-the-art pyroelectric Pb(Mg1/3Nb2/3)O3-PbTiO3 Our first-principles and thermodynamic calculations show that the strong coupling between the order parameters, i.e., the rotation angle of anions and polarization, is responsible for the colossal pyroelectric coefficient of the molecular ferroelectrics. Along with the facile preparation and self-poling features, the improper molecular ferroelectrics hold great promise for high-performance pyroelectric devices.

Promoting photocatalytic hydrogen evolution over the perovskite oxide Pr0.5(Ba0.5Sr0.5)0.5Co0.8Fe0.2O3 by plasmon-induced hot electron injection.

Exploration of highly efficient and stable photocatalysts for water splitting has attracted much attention. However, developing a facile and effective approach to enhance the photocatalytic activity for practical applications is still highly challenging. Herein, we report a newly-fabricated perovskite oxide (Pr0.5(Ba0.5Sr0.5)0.5Co0.8Fe0.2O3) decorated with Au ultrafine nanoparticles for photocatalytic water splitting. An exceptionally high hydrogen evolution rate of 1618 µmol g-1 h-1 was achieved (under 2 h illumination) when the Au mass loading was optimized to 9.3 wt%, which is 540 times higher than that of the pristine one. The splendid photocatalytic activity of the sample was attributed to plasmon-excited hot electron injection from Au to Pr0.5(Ba0.5Sr0.5)0.5Co0.8Fe0.2O3 (PBSCF) under illumination. The finite-difference time-domain simulations (FDTD) demonstrated that the localized strong electric field formed at the interface between Au and PBSCF under illumination, enables the hot electrons to be energetic and make the injection possible.

Controllable MXene nano-sheet/Au nanostructure architectures for the ultra-sensitive molecule Raman detection.

Surface-enhanced Raman scattering (SERS) spectroscopy aims to augment the relatively weak molecular vibrations based on electromagnetic enhancement (EE) and chemical enhancement (CE) mechanisms, and offers a potential way for material identification, even up to the single-molecule level, under atmospheric conditions. We have subtly combined the advantages of EE and CE, and propose new MXene (Ti3C2TX) nano-sheet/Au nanostructure architectures to break through the limitations of the Raman detection with long-time stability. The MXene nanosheets with excellent biocompatibility can effectively prevent structural distortion from the interaction with the Au NSs, and can also guarantee a high enhancement effect owing to the spatially extended electromagnetic field distribution and electron injection into the molecules. The self-assembled Au nanostructures are aggregated based on the Volmer-Weber growth model, and the electromagnetic field distribution radically evolves depending on the morphologies of the resultant Au nanostructures, leading to a drastic compensation for the limited EE of the MXene nano-sheets. Consequently, the intensified Raman vibrational signals of R6G molecules lead to a high enhancement factor of 2.9 × 107, even at an ultra-low concentration of 10-10 M. Similarly, the Raman signals of the methylene blue (MB) and crystal violet (CV) molecules can also be detected at low concentrations below 10-8 M, manifesting universal applications of the MXene/Au architectures for ultra-sensitive molecular detection under atmospheric conditions.

Nanoconfinement-Induced Giant Electrocaloric Effect in Ferroelectric Polymer Nanowire Array Integrated with Aluminum Oxide Membrane to Exhibit Record Cooling Power Density.

The electrocaloric effect (ECE) offers a unique mechanism to realize environmentally friendly and highly efficient solid-state cooling that completely differs from the conventional vapor-compression refrigeration. Here a new class of hybrid films composed of ferroelectric polymer nanowire array and anodic aluminum oxide (AAO) membrane is reported, which displays pronounced ECE driven by relatively low electric fields. Under confinement and orientation of AAO channels on the crystallization of the polymer, the polymer nanowire array shows substantially enhanced ECE that is about three times that of the corresponding thin films. Simultaneously, the integrated AAO membrane forms thermally conducting channels for the polymer nanowires, enabling the efficient transfer of cooling energy and operation of the EC materials under high frequencies, which are unattainable based on the currently available EC structures. Consequently, the integrated polymer nanowire-AAO hybrid film exhibits the state-of-the-art cooling power density, outperforming the current ferroelectric polymers, ceramics, and composites. This work opens a new route for the development of scalable, high-performance EC materials for next-generation refrigeration.