The two-step cargo recognition mechanism of heterotrimeric kinesin.

Kinesin-driven intracellular transport is essential for various cell biological events and thus plays a crucial role in many pathological processes. However, little is known about the molecular basis of the specific and dynamic cargo-binding mechanism of kinesins. Here, an integrated structural analysis of the KIF3/KAP3 and KIF3/KAP3-APC complexes unveils the mechanism by which KIF3/KAP3 can dynamically grasp APC in a two-step manner, which suggests kinesin-cargo recognition dynamics composed of cargo loading, locking, and release. Our finding is the first demonstration of the two-step cargo recognition and stabilization mechanism of kinesins, which provides novel insights into the intracellular trafficking machinery.

Inhibition of histone H3-H4 chaperone pathways rescues C. elegans sterility by H2B loss.

Oncohistone mutations are crucial drivers for tumorigenesis, but how a living organism governs the loss-of-function oncohistone remains unclear. We generated a histone H2B triple knockout (3KO) strain in Caenorhabditis elegans, which decreased the embryonic H2B, disrupted cell divisions, and caused animal sterility. By performing genetic suppressor screens, we uncovered that mutations defective in the histone H3-H4 chaperone UNC-85 restored H2B 3KO fertility by decreasing chromatin H3-H4 levels. RNA interference of other H3-H4 chaperones or H3 or H4 histones also rescued H2B 3KO sterility. We showed that blocking H3-H4 chaperones recovered cell division in C. elegans carrying the oncohistone H2BE74K mutation that distorts the H2B-H4 interface and induces nucleosome instability. Our results indicate that reducing chromatin H3-H4 rescues the dysfunctional H2B in vivo and suggest that inhibiting H3-H4 chaperones may provide an effective therapeutic strategy for treating cancers resulting from loss-of-function H2B oncohistone.

DYF-5/MAK-dependent phosphorylation promotes ciliary tubulin unloading.

Cilia are microtubule-based organelles that power cell motility and regulate sensation and signaling, and abnormal ciliary structure and function cause various ciliopathies. Cilium formation and maintenance requires intraflagellar transport (IFT), during which the kinesin-2 family motor proteins ferry IFT particles carrying axonemal precursors such as tubulins into cilia. Tubulin dimers are loaded to IFT machinery through an interaction between tubulin and the IFT-74/81 module; however, little is known of how tubulins are unloaded when arriving at the ciliary tip. Here, we show that the ciliary kinase DYF-5/MAK phosphorylates multiple sites within the tubulin-binding module of IFT-74, reducing the tubulin-binding affinity of IFT-74/81 approximately sixfold. Ablation or constitutive activation of IFT-74 phosphorylation abnormally elongates or shortens sensory cilia in Caenorhabditis elegans neurons. We propose that DYF-5/MAK-dependent phosphorylation plays a fundamental role in ciliogenesis by regulating tubulin unloading.

Comparing ranibizumab, dexamethasone implant, and combined therapy for macular edema secondary to branch retinal vein occlusion: a clinical trial.

BACKGROUND: Macular edema (ME) is a common complication following branch retinal vein occlusion (BRVO) and is also the main reason for visual impairment. This study aimed to compare the efficacy and safety of intravitreal ranibizumab (IVR) or dexamethasone implant (IDI) monotherapy, as well as the combination of IVR and IDI injections, in patients with ME secondary to branch retinal vein occlusion (BRVO). METHODS: This multicenter, prospective, and comparative study included 292 patients with unilateral ME involvement (total of 292 eyes) secondary to BRVO. The patients were randomly assigned to three groups and followed up for 12 months. Patients in group 1 (n = 96) were treated with 3-dose loading IVR injections followed by a pro re nata (PRN) regimen. Patients in group 2 (n = 98) received IVR combined with IDI injection, followed by IVR PRN regimen. Patients in group 3 (n = 98) were treated with IDI injection, followed by repeated IDI injection based on clinical necessity. Best corrected visual acuity (BCVA), central retinal thickness (CRT), complications, and frequency of injections were recorded and compared between the three groups. RESULTS: At baseline, the three groups did not differ in age, gender, duration of ME, BCVA, IOP, and CRT (P > 0.05). Mean number of total injections per eye within 12 months were 7.1 ± 2.3 (range 4-9) in group 1, 3.7 ± 1.5 (range 2-6) in group 2, and 1.8 ± 0.4 (range 1-3) in group 3. There was a statistical difference in the number of injections between group 1 and group 2 (P = 0.037). Eyes in group 3 received fewer injections than those in group 2, but the difference was not statistically significant (P = 0.052). BCVA improvement and CRT reduction were achieved in all groups and there was no significant difference between the three groups at the end of the 12th month. However, IOP elevation and cataract progression were more frequent in group 3, especially in those patients who received repeated IDI injections. CONCLUSION: Three therapeutic regimens had comparable efficacy in treating ME secondary to BRVO. Combination therapy had an advantage in maintaining good effect with fewer re-injections and complications. TRIAL REGISTRATION INFORMATION: The study complied with the principles of the Declaration of Helsinki and was approved by Xi'an Aier Ancient City Eye Hospital, Xi'an Aier Eye Hospital, and Xianyang Aier Eye Hospital ethics committees (2022SF-367).

Correlation of MMP-2, TIMP-1, ß2-MG and hs-CRP with the progression of retinopathy in patients with type 2 diabetes.

This study aimed to investigate the relationship between MMP-2, TIMP-1, ß2-MG, hs-CRP and the progression of type 2 diabetic retinopathy (T2DM). For this purpose, 68 patients with T2DM retinopathy treated in our hospital were selected as the retinopathy group (REG), and 68 T2DM patients without retinopathy were selected as the control group (CDG). The serum levels of MMP-2, TIMP-1, ß2-MG and hs-CRP were compared between the two groups. According to the international clinical classification of T2DM non-retinopathy (NDR), the patients were divided into non-proliferative T2DM retinopathy group (NPDR) (n=28) and proliferative T2DM retinopathy group (PDR) (n=40). The levels of MMP-2, TIMP-1, ß2-MG and hs-CRP in patients with different conditions were compared. In addition, the Spearman method was used to analyze the correlation between the levels of MMP-2, TIMP-1, ß2-MG, hs-CRP and glucose and lipid metabolism and the course of disease in patients with T2DM retinopathy (DR). Logistic multiple regression was used to analyze the risk factors of DR. Results showed that the levels of serum MMP-2, ß2-MG and hs-CRP in PDR groups were raised than those in NPDR and NDR, while the serum TIMP-1 level was reduced. The levels of MMP-2, ß2-MG and hs-CRP were positively correlated with the levels of HbA1c, TG and the course of disease in DR patients, while the levels of TIMP-1 in DR patients were negatively correlated with the levels of HbA1c, TG and the course of disease. The results of multivariate Logistic regression model showed that MMP-2, ß2-MG and hs-CRP were independent risk factors for DR, and TIMP-1 was the protective factor for DR. In conclusion, the changes of peripheral blood MMP-2, TIMP-1, hs-CRP and ß2-MG levels are closely related to the progression of T2DM retinopathy.

Zeolite NaP1 synthesized from municipal solid waste incineration fly ash for photocatalytic degradation of methylene blue.

The disposal of hazardous municipal solid waste incineration (MSWI) fly ash is a challenge nowadays. Recently, the re-utilization of MSWI fly ash by converting it to useful zeolite-containing materials has attracted attention. However, the zeolitic products fabricated from MSWI fly ash are usually of low quality and rarely reported to be applied for photocatalysis. In this study, valuable zeolites (e.g., NaP1) are synthesized from MSWI fly ash via a modified microwave-assisted hydrothermal method. The key parameters for the hydrothermal method including temperature, duration, the amount of additive, and water volume, are investigated and optimized. Specifically, increasing the hydrothermal temperature can promote the synthesis of zeolitic materials; a relatively long hydrothermal duration is essential to accomplish the assembly of zeolites; the addition of Na2SiO3 can increase the precursor for the fabrication of zeolites; the water volume makes little influence on the crystal style of products. Eventually, the hydrothermal condition of 180 °C, 1 h, 0.5 g Na2SiO3, and 10 mL water is suggested based on the energy consumption and the quality of zeolites. The product containing zeolite NaP1 from such a condition is further applied to degrade methylene blue by photocatalysis. The removal rate has reached 96% within 12 h, which dramatically surpasses that of the raw fly ash (38%). Such excellent photocatalytic performance is attributed to the 10-fold increased surface area (24.864 m2 g-1) and active metal elements embedding in the zeolite structures.

Influence of Heme Oxygenase-1 on Rats with Diabetic Retinopathy Through ERK1/2 Signaling Pathway.

The study aimed to investigate the influence of heme oxygenase-1 (HO-1) on rats with diabetic retinopathy (DR) through the extracellular signal-regulated kinase (ERK) 1/2 signaling pathway. 40 rats were selected and divided into Control group (n=10), diabetes mellitus (DM) group (n=10), cobalt protoporphyrin (CoPP) group (n=10) and zinc protoporphyrin (ZnPP) group (n=10) according to weight. Streptozotocin (STZ) was intraperitoneally injected to establish the DM model in DM, CoPP and ZnPP groups, and CoPP and ZnPP solution was intraperitoneally injected in CoPP and ZnPP groups, respectively. Blood was drawn to determine fasting blood glucose. The changes in the protein and messenger ribonucleic acid (mRNA) levels were evaluated via Western blotting and polymerase chain reaction (qRT-PCR), respectively. Enzyme-linked immunosorbent assay (ELISA) was performed to measure antioxidant capacity and the levels of total reactive oxygen species (ROS), malondialdehyde (MDA), glutathione (GSH) and glutathione peroxidase (GPx). The weight of rats was notably higher in the CoPP group and lower inZnPP group than in the DM group (p<0.05). After induction of DM, compared with those in the DM group, the protein expression levels of Nrf2 and pERK were considerably elevated in the CoPP group (p<0.05) but declined remarkably in the ZnPP group (p<0.05). The levels of total ROS and MDA were notably elevated (p<0.05) in DM and ZnPP groups, with a lowered level of GPx and distinctly elevated levels of MDA and total ROS (p<0.05). Moreover, the mRNA expression level of HO-1 in the retinas of rats was remarkably raised in the DM group and CoPP group (p<0.05), but it declined markedly in the ZnPP group (p<0.05). The red fluorescent aggregation of Nrf2 and pERK proteins was overtly less in the ZnPP group than that in the DM group (p<0.05). HO-1 can affect the level of oxidative stress and intervene in retinopathy in DM rats through the Nrf2/ERK pathway.

Antibiotic binding releases autoinhibition of the TipA multidrug-resistance transcriptional regulator.

Investigations of bacterial resistance strategies can aid in the development of new antimicrobial drugs as a countermeasure to the increasing worldwide prevalence of bacterial antibiotic resistance. One such strategy involves the TipA class of transcription factors, which constitute minimal autoregulated multidrug resistance (MDR) systems against diverse antibiotics. However, we have insufficient information regarding how antibiotic binding induces transcriptional activation to design molecules that could interfere with this process. To learn more, we determined the crystal structure of SkgA from Caulobacter crescentus as a representative TipA protein. We identified an unexpected spatial orientation and location of the antibiotic-binding TipAS effector domain in the apo state. We observed that the α6-α7 region of the TipAS domain, which is canonically responsible for forming the lid of antibiotic-binding cleft to tightly enclose the bound antibiotic, is involved in the dimeric interface and stabilized via interaction with the DNA-binding domain in the apo state. Further structural and biochemical analyses demonstrated that the unliganded TipAS domain sterically hinders promoter DNA binding but undergoes a remarkable conformational shift upon antibiotic binding to release this autoinhibition via a switch of its α6-α7 region. Hence, the promoters for MDR genes including tipA and RNA polymerases become available for transcription, enabling efficient antibiotic resistance. These insights into the molecular mechanism of activation of TipA proteins advance our understanding of TipA proteins, as well as bacterial MDR systems, and may provide important clues to block bacterial resistance.

Study on the evolution and transformation of chlorine during co-processing of hazardous waste incineration residue in a cement kiln.

The co-processing of hazardous waste in a cement kiln can eliminate a large quantity of hazardous wastes, but the excessive existence of chlorine will affect not only the operation of a cement kiln but also the quality of cement products. In this study, the mixtures of hazardous waste incineration residue and raw meal were incinerated in a high temperature tubular furnace. The distribution ratio of chlorine in flue gas, clinker and fly ash under different experiment conditions was obtained and the influence of the co-processing conditions on chlorine evolution and transformation was studied. The results showed that chlorine mainly existed in flue gas and clinker, and only less than 1% of chlorine existed in fly ash. The incineration temperature had a significant influence on the distribution of chlorine. The higher the incinerating temperature, the greater the distribution ratio of chlorine in flue gas and fly ash. The proportion of chlorine in all parts remained basically unchanged while the temperature was higher than 1300°C. With the increase of the retention time, the proportion of chlorine released into the flue gas increased. The distribution ratio of chlorine in each part remained unchanged after about 30 minutes. There were four stages of the rate of chlorine release. In addition, the chlorine content of the sample had little effect on the partition of chlorine. Some suggestions on the co-processing of hazardous waste in a cement kiln are put forward based on these experimental results.

Molten salt oxidation of organic hazardous waste with high salt content.

Organic hazardous waste often contains some salt, owing to the widespread use of alkali salts during industrial manufacturing processes. These salts cause complications during the treatment of this type of waste. Molten salt oxidation is a flameless, robust thermal process, with inherent capability of destroying the organic constituents of wastes, while retaining the inorganic ingredients in the molten salt. In the present study, molten salt oxidation is employed for treating a typical organic hazardous waste with a high content of alkali salts. The hazardous waste derives from the production of thiotriazinone. Molten salt oxidation experiments have been conducted using a lab-scale molten salt oxidation reactor, and the emissions of CO, NO, SO2, HCl and dioxins are studied. Impacts are investigated from the composition of the molten salts, the types of feeding tube, the temperature of molten carbonates and the air factor. Results show that the waste can be oxidised effectively in a molten salt bath. Temperature of molten carbonates plays the most important role. With the temperature rising from 600 °C to 750 °C, the oxidation efficiency increases from 91.1% to 98.3%. Compared with the temperature, air factor has but a minor effect, as well as the composition of the molten salts and the type of feeding tube. The molten carbonates retain chlorine with an efficiency higher than 99.9% and the emissions of dioxins are below 8 pg TEQ g-1 sample. The present study shows that molten salt oxidation is a promising alternative for the disposal of organic hazardous wastes containing a high salt content.

Dioxins and polyvinylchloride in combustion and fires.

This review on polyvinylchloride (PVC) and dioxins collects, collates, and compares data from selected sources on the formation of polychlorinated dibenzofurans (PCDFs) and dibenzo-p-dioxins (PCDDs), or in brief dioxins, in combustion and fires. In professional spheres, the incineration of PVC as part of municipal solid waste is seldom seen as a problem, since deep flue gas cleaning is required anyhow. Conversely, with its high content of chlorine, PVC is frequently branded as a major chlorine donor and spitefully leads to substantial formation of dioxins during poorly controlled or uncontrolled combustion and open fires. Numerous still ill-documented and diverse factors of influence may affect the formation of dioxins during combustion: on the one hand PVC-compounds represent an array of materials with widely different formulations; on the other hand these may all be exposed to fires of different nature and consequences. Hence, attention should be paid to PVC with respect to the ignition and development of fires, as well as attenuating the emission of objectionable compounds, such as carbon monoxide, hydrogen chloride, polycyclic aromatic hydrocarbons, and dioxins. This review summarises available dioxin emissions data, gathers experimental and simulation studies of fires and combustion tests involving PVC, and identifies and analyses the effects of several local factors of influence, affecting the formation of dioxins during PVC combustion.

Structure of Rot, a global regulator of virulence genes in Staphylococcus aureus.

Staphylococcus aureus is a highly versatile pathogen that can infect human tissue by producing a large arsenal of virulence factors that are tightly regulated by a complex regulatory network. Rot, which shares sequence similarity with SarA homologues, is a global regulator that regulates numerous virulence genes. However, the recognition model of Rot for the promoter region of target genes and the putative regulation mechanism remain elusive. In this study, the 1.77 Šresolution X-ray crystal structure of Rot is reported. The structure reveals that two Rot molecules form a compact homodimer, each of which contains a typical helix-turn-helix module and a ß-hairpin motif connected by a flexible loop. Fluorescence polarization results indicate that Rot preferentially recognizes AT-rich dsDNA with ~30-base-pair nucleotides and that the conserved positively charged residues on the winged-helix motif are vital for binding to the AT-rich dsDNA. It is proposed that the DNA-recognition model of Rot may be similar to that of SarA, SarR and SarS, in which the helix-turn-helix motifs of each monomer interact with the major grooves of target dsDNA and the winged motifs contact the minor grooves. Interestingly, the structure shows that Rot adopts a novel dimerization model that differs from that of other SarA homologues. As expected, perturbation of the dimer interface abolishes the dsDNA-binding ability of Rot, suggesting that Rot functions as a dimer. In addition, the results have been further confirmed in vivo by measuring the transcriptional regulation of α-toxin, a major virulence factor produced by most S. aureus strains.

Leaching behavior and comprehensive toxicity evaluation of heavy metals in MSWI fly ash from grate and fluidized bed incinerators using various leaching methods: A comparative study.

Municipal solid waste incineration fly ash (MSWI FA) is a kind of hazardous waste that contains a substantial amount of heavy metals. To facilitate the appropriate treatment of MSWI FA, the leaching behavior of heavy metals was evaluated in MSWI FA from various sources using different leaching methods. Nine kinds of MSWI FA were investigated using three kinds of batch leaching tests (TCLP, HJ/T 300, and EN12457-2). The chemical form distributions of heavy metals in MSWI FA were obtained by sequential extraction procedures (SEPs) and the environmental risk posed by MSWI FA was comprehensively evaluated. The results showed that the grate and fluidized bed MSWI FA performed differently in various leaching methods, which was mainly dependent on the leachate pH and the chemical form distributions of the heavy metals. In addition, the BCR SEP was more suitable for the fractionation of heavy metals and the environmental risk assessment of MSWI FA when compared with Tessier's SEP. The overall pollution toxicity index allowed a comprehensive risk assessment specific to the leaching environment, thereby offering valuable guidelines for the stabilization or resource-based treatment of MSWI FA.

Removal of PCDD/Fs and PCBs from flue gas using a pilot gas cleaning system.

A 100 Nm3/hr capacity pilot scale dual bag filter (DBF) system was tested on the flue gas from an actual hazardous waste incinerator (HWI), the removal efficiency of polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDD/Fs) and polychlorinated biphenyls (PCBs) was also studied. The first filter collected most of the fly ash and associated chlorinated organic; then activated carbon (AC) was injected and used to collect phase chlorinated organic from the gas. Concentrations of PCDD/Fs and PCBs after the DBF system were 0.07 and 0.01 ng TEQ/Nm3, respectively, which were both far below the national emission standard. Comparing with the original single bag filter system, the PCDD/Fs concentration dropped a lot from 0.36 to 0.07 ng TEQ/Nm3. Increasing AC feeding rate enhanced their collection efficiency, yet reduced the AC utilization efficiency, and it still needs further study to select an appropriate feeding rate in the system. These results will be useful for industrial application and assist in controlling emissions of PCDD/Fs and other persistent organic pollutions from stationary sources in China.

Synthesis of high-quality NaP1 zeolite from municipal solid waste incineration fly ash by microwave-assisted hydrothermal method and its adsorption capacity.

The Si and Al in municipal solid waste incineration fly ash (MSWI FA) can be utilized for zeolite fabrication, which can improve the application value of the products. This study focuses on the fabrication of zeolite from MSWI FA by microwave-assisted hydrothermal (MH) treatment. The effects of magnetic stirring time, Na2SiO3 dosage, MH time, and NaOH solution concentration on the crystallization of zeolite NaP1 from MSWI FA are systematically analyzed. The synthetic products are analyzed through spectroscopic and mineralogical methods. The results show that zeolite NaP1 with high crystallinity (51.68 %) can be fabricated by magnetic stirring and MH treatment, and the cation exchange capacity (CEC) of the product can reach a value of 2.58 meq/g, which is approximately 133 times that of the CEC of MSWI FA. The Si/Al ratio plays a decisive role in the zeolite NaP1 synthesis, and a Na2SiO3 dosage of 30 wt% is adopted for zeolite NaP1 fabrication. A NaOH concentration of 1 M is sufficient for zeolite NaP1 synthesis. Additionally, the zeolite NaP1 content is found to obviously increase with increasing MH time from 0.5 h to 2 h. To demonstrate the feasibility of the method provided in this study, the optimal experimental condition is employed for various MSWI FAs, and zeolite NaP1 and analcime are fabricated successfully. The leachability of heavy metals for the synthetic products was evaluated, which met the requirements for pollution control. The BET surface area and total pore volume of zeolite NaP1 fabricated at optimal condition are 61.42 m2/g and 0.44 cm3/g, respectively. The adsorption capacity of zeolite NaP1 for Cu2+ ion and methylene blue are determined to be 84.65 mg/g and 84.55 mg/g, respectively, indicating zeolite NaP1 is a potential adsorbent for cation ion and dyes. This study provides an environmentally friendly scheme for the utilization of MSWI FA.

Improving stabilization/solidification of MSWI fly ash with coal gangue based geopolymer via increasing active calcium content.

Municipal solid waste incineration fly ash (MSWI FA) is categorized as a hazardous waste, which demands environmentally acceptable treatment due to its easy leachability toxic of heavy metals. This study investigated an innovative and improved method for stabilization/solidification (S/S) of MSWI FA with coal gangue based geopolymer by the addition of active calcium content. The specimen with addition of calcium oxide up to 10 % reached the compressive strength of 2.14 MPa at 28 d. The addition of 30 % calcium oxide resulted in the highest immobilization efficiencies of Cd (98.96 %) and Pb (99.19 %). X-ray Diffraction (XRD), Fourier Transform Infrared Spectrometry (FTIR), Scanning Electron Microscope (SEM), and thermogravimetric (TG) analysis indicated the generation of calcium-containing hydration products was promoted after the improvement of calcium content in binder. Heavy metals were stabilized through the chemical adsorption and ions exchange of amorphous hydration products. On the whole, this study illustrated that the incorporation of active calcium content can improve efficiently S/S of hazardous ash waste such as MSWI FA.

Immobilization mechanisms of heavy metals by utilizing natural cow bone waste for municipal solid waste incineration fly ash treatment.

Municipal solid waste incinerator (MSWI) fly ash poses intricate compositional challenges and potential environmental hazards. Effective management of such hazardous waste is imperative to mitigate the release of toxic compounds into the environment. Solidification/stabilization (S/S) processes have emerged as a viable strategy to transform MSWI fly ash from incineration waste into a safer and more environmentally benign material. This study aims to comprehensively investigate the potential of utilizing cow bone waste to stabilize heavy metals, focusing on Pb, within municipal solid waste incineration fly ash. Experimental investigations encompassed cow bone-to-fly ash weight ratios ranging from 0.0 (control group) to 7:3, a settling time of 2 h, and a liquid-to-solid (L/S) ratio of 1.0 mL/g. Cow bone waste exhibited pronounced efficacy, particularly within the short settling time, yielding a remarkable Pb removal efficiency of up to 99% at a cow bone waste dose of merely 2% and an L/S ratio of 1.0 mL/g. Concurrently, other heavy metals such as Cd, Cu, and Zn were effectively stabilized with a cow bone waste dose of 1.5% during the same 2-h settling period. The results underscore the pivotal roles of ash/bone ratio and settling time in augmenting Pb stabilization in MSWI fly ash. The application of cow bone waste is anticipated to offer a cost-effective and environmentally sound approach, aligning with sustainable waste management principles.

Volatilization behavior of fluorine in fluoroborate residue during pyrolysis.

Industrial hazardous waste from the fluorine chemical industry sometimes has a high content of fluorine, and incinerating it could be very poisonous if the flue gas is not properly disposed. In this study fluoroborate residue is used to represent a typical waste from the fluorine chemical industry . Thermogravimetric analysis coupled with Fourier transform infrared analysis (TG-FTIR analysis) was used to study the evolution characteristics of gaseous products during the pyrolysis of fluoroborate residue. The pyrolysis process of fluoroborate residue could be divided into three stages according to the TG analysis: moisture loss, fast decomposition, and charring. SiF(4), BF(3), and HF are found as fluorine gas species evolved in the pyrolysis process. The evolution of SiF(4) finishes at 600 °C. The evolution of BF(3) has two peaks and most of the emission happens before 600 °C. The release of HF could be divided into two stages due to the different existence of F(-). In addition, the reforming condition of different fluorine-containing gaseous substances is verified in a thermodynamic equilibrium model and the results could explain the experiment phenomenon well.

Bioferment residue: TG-FTIR study and cocombustion in a MSW incineration plant.

With fast development of industry large quantities of hazardous waste are produced in China. Today, incineration plays an important role in the disposal of hazardous waste. Co-incineration of some types of hazardous wastes with municipal solid waste (MSW) has been suggested in the Proposed Standards for Pollutants for MSW combustors in China, published in 2010. According to this proposal, coincinerated hazardous waste should have similar combustion characteristics with MSW, such as bioferment residue (HW02-276-001-02 in China Hazardous Waste List). In this study, residue from the production of hydrochloride salt spectinomycin, a bioferment process, was studied by thermogravimetric analysis (TGA) coupled with Fourier transform infrared (TG-FTIR) analysis. In TGA, the sample attains its final weight before 800 °C. No gaseous pollutants evolve in large amount during FTIR analysis. During test runs at a MSW incineration plant in Jinhua, Zhejiang Province, bioferment residue was added to MSW at a rate of 24 ton/day and fed to the circulated fluidized bed (CFB) incineration system with capacity of 500 ton/day MSW. The operating parameters and emissions were monitored. The system performance was obviously not affected by addition of bioferment residue to MSW/coal and the pollutant emissions met the Chinese standard, with or without addition of bioferment into feedstock.

Zeolite greenly synthesized from fly ash and its resource utilization: A review.

Fly ash is an incineration byproduct of thermal power plants. Due to the complex composition of fly ash, improper disposal will seriously harm the ecological environment. Therefore, how to effectively use fly ash to safely and environmentally replace landfills is a worldwide concern. Considering the high silicon and aluminum contents in fly ash, it has the potential to synthesize zeolite, which has a wide range of applications in sewage treatment, gas adsorption, etc. Therefore, the synthesis of zeolites from fly ash is consistent with the theme of sustainable development. The synthesis mechanism of zeolite, various synthetic methods of zeolite from fly ash and their advantages and disadvantages was introduced in detail. In addition, combined with the current research hotspots, the application of synthetic zeolite from fly ash in the fields of sewage treatment and gas adsorption was introduced. Finally, the future development prospects and research directions of synthetic zeolite from fly ash to improve the utilization rate of fly ash were considered.