Mechanistic Insights into Hyaluronic Acid Induced Peptide Nanofiber Organization in Supramolecular Hydrogels.

Composite hydrogels composed of low-molecular-weight peptide self-assemblies and polysaccharides are gaining great interest as new types of biomaterials. Interactions between polysaccharides and peptide self-assemblies are well reported, but a molecular picture of their impact on the resulting material is still missing. Using the phosphorylated tripeptide precursor Fmoc-FFpY (Fmoc, fluorenylmethyloxycarbonyl; F, phenylalanine; Y, tyrosine; p, phosphate group), we investigated how hyaluronic acid (HA) influences the enzyme-assisted self-assembly of Fmoc-FFY generated in situ in the presence of alkaline phosphatase (AP). In the absence of HA, Fmoc-FFY peptides are known to self-assemble in nanometer thick and micrometer long fibers. The presence of HA leads to the spontaneous formation of bundles of several micrometers thickness. Using fluorescence recovery after photobleaching (FRAP), we find that in the bundles both (i) HA colocalizes with the peptide self-assemblies and (ii) its presence in the bundles is highly dynamic. The attractive interaction between negatively charged peptide fibers and negatively charged HA chains is explained through molecular dynamic simulations that show the existence of hydrogen bonds. Whereas the Fmoc-FFY peptide self-assembly itself is not affected by the presence of HA, this polysaccharide organizes the peptide nanofibers in a nematic phase visible by small-angle X-ray scattering (SAXS). The mean distance d between the nanofibers decreases by increasing the HA concentration c, but remains always larger than the diameter of the peptide nanofibers, indicating that they do not interact directly with each other. At a high enough HA concentration, the nematic organization transforms into an ordered 2D hexagonal columnar phase with a nanofiber distance d of 117 Å. Depletion interaction generated by the polysaccharides can explain the experimental power law variation d∼c-1/4 and is responsible for the bundle formation and organization. Such behavior is thus suggested for the first time on nano-objects using polymers partially adsorbing on self-assembled peptide nanofibers.

Grafting of Crown Ether and Cryptand Macrocycles on Large Pore Stellate Mesoporous Silica for Sodium Cation Extraction.

Regulation of the sodium cations level in the case of renal failure diseases is a very challenging task for clinicians, and new pollutant extractors based on nanomaterials are emerging as potential treatments. In this work, we report different strategies for the chemical functionalization of biocompatible large pore mesoporous silica, denoted stellate mesoporous silica (STMS), with chelating ligands able to selectively capture sodium. We address efficient methods to covalently graft highly chelating macrocycles onto STMS NPs such as crown ethers (CE) and cryptands (C221) through complementary carbodiimidation reactions. Regarding sodium capture in water, C221 cryptand-grafted STMS showed better capture efficiency than CE-STMS due to higher sodium atom chelation in the cryptand cage (Na+ coverage of 15.5% vs. 3.7%). The sodium selectivity was hence tested with C221 cryptand-grafted STMS in a multi-element aqueous solution (metallic cations with the same concentration) and in a solution mimicking peritoneal dialysis solution. Results obtained indicate that C221 cryptand-grafted STMS are relevant nanomaterials to extract sodium cations in such media and allow us to regulate their levels.

Hierarchical Self-Assembly and Multidynamic Responsiveness of Fluorescent Dynamic Covalent Networks Forming Organogels.

Smart stimuli-responsive fluorescent materials are of interest in the context of sensing and imaging applications. In this project, we elaborated multidynamic fluorescent materials made of a tetraphenylethene fluorophore displaying aggregation-induced emission and short cysteine-rich C-hydrazide peptides. Specifically, we show that a hierarchical dynamic covalent self-assembly process, combining disulfide and acyl-hydrazone bond formation operating simultaneously in a one-pot reaction, yields cage compounds at low concentration (2 mM), while soluble fluorescent dynamic covalent networks and even chemically cross-linked fluorescent organogels are formed at higher concentrations. The number of cysteine residues in the peptide sequence impacts directly the mechanical properties of the resulting organogels, Young's moduli varying 2500-fold across the series. These materials underpinned by a nanofibrillar network display multidynamic responsiveness following concentration changes, chemical triggers, as well as light irradiation, all of which enable their controlled degradation with concomitant changes in spectroscopic outputs─self-assembly enhances fluorescence emission by ca. 100-fold and disassembly quenches fluorescence emission.

Curcumin Loaded Nanoliposomes Localization by Nanoscale Characterization.

Curcumin is a hydrophobic drug gaining growing attention because of its high availability, its innocuity, and its anticancer, antitumoral, and antioxidative activity. However, its poor bioavailability in the human body, caused by its low aqueous solubility and fast degradation, presents a big hurdle for its oral administration. Here, we used nano-vesicles made of phospholipids to carry and protect curcumin in its membrane. Various curcumin amounts were encapsulated in the produced phospholipid system to form drug-loaded liposomes. Curcumin's concentration was evaluated using UV-visible measurements. The maximal amount of curcumin that could be added to liposomes was assessed. Nuclear magnetic resonance (NMR) analyses were used to determine curcumin's interactions and localization within the phospholipid membrane of the liposomes. X-ray scattering (SAXS) and atomic force microscopy (AFM) experiments were performed to characterize the membrane structure and organization, as well as its mechanical properties at the nanoscale. Conservation of the membrane's properties is found with the addition of curcumin in various amounts before saturation, allowing the preparation of a defined nanocarrier with desired amounts of the drug.

Reversible Soft Mechanochemical Control of Biaryl Conformations through Crosslinking in a 3D Macromolecular Network.

Tuning the dihedral angle (DA) of axially chiral compounds can impact biological activity, catalyst efficiency, molecular motor performance, or chiroptical properties. Herein, we report gradual, controlled, and reversible changes in molecular conformation of a covalently linked binaphthyl moiety within a 3D polymeric network by application of a macroscopic stretching force. We managed direct observation of DA changes by measuring the circular dichroism signal of an optically pure BINOL-crosslinked elastomer network. Stretching the elastomer resulted in a widening of the DA between naphthyl rings when the BINOL was doubly grafted to the elastomer network; no effect was observed when a single naphthyl ring of the BINOL was grafted to the elastomer network. We have determined that ca. 170 % extension of the elastomers led to the transfer of a mechanical force to the BINOL moiety of 2.5 kcal mol-1 Å-1 (ca. 175 pN) in magnitude and results in the opening of the DA of BINOL up to 130°.

Autonomous Growth of a Spatially Localized Supramolecular Hydrogel with Autocatalytic Ability.

Autocatalysis and self-assembly are key processes in developmental biology and are involved in the emergence of life. In the last decade both of these features were extensively investigated by chemists with the final goal to design synthetic living systems. Herein, we describe the autonomous growth of a self-assembled soft material, that is, a supramolecular hydrogel, able to sustain its own formation through an autocatalytic mechanism that is not based on any template effect and emerges from a peptide (hydrogelator) self-assembly. A domino sequence of events starts from an enzymatically triggered peptide generation followed by self-assembly into catalytic nanofibers that induce and amplify their production over time, resulting in a 3D hydrogel network. A cascade is initiated by traces (10-18 m) of a trigger enzyme, which can be localized allowing for a spatial resolution of this autocatalytic buildup of hydrogel growth, an essential condition on the route towards further cell-mimic designs.

Phase Separation in Supramolecular Hydrogels Based on Peptide Self-Assembly from Enzyme-Coated Nanoparticles.

Spatial localization of biocatalysts, such as enzymes, has recently proven to be an effective process to direct supramolecular self-assemblies in a spatiotemporal way. In this work, silica nanoparticles (NPs) functionalized covalently by alkaline phosphatase (NPs@AP) induce the localized growth of self-assembled peptide nanofibers from NPs by dephosphorylation of Fmoc-FFpY peptides (Fmoc: fluorenylmethyloxycarbonyl; F: phenylalanine; Y: tyrosine; p: phosphate group). The fibrillary nanoarchitecture around NPs@AP underpins a homogeneous hydrogel, which unexpectedly undergoes a macroscopic shape change over time. This macroscopic change is due to a phase separation leading to a dense phase (in NPs and nanofibers) in the center of the vial and surrounded by a dilute one, which still contains NPs and peptide self-assemblies. We thus hypothesize that the phase separation is not a syneresis process. Such a change is only observed when the enzymes are localized on the NPs. The dense phase contracts with time until reaching a constant volume after several days. For a given phosphorylated peptide concentration, the dense phase contracts faster when the NPs@AP concentration is increased. For a given NPs@AP concentration, it condenses faster when the peptide concentration increases. We hypothesize that the appearance of a dense phase is not only due to attractive interactions between NPs@AP but also to the strong interactions of self-assembled peptide nanofibers with the enzymes, covalently fixed on the NPs.

Supported Catalytically Active Supramolecular Hydrogels for Continuous Flow Chemistry.

Inspired by biology, one current goal in supramolecular chemistry is to control the emergence of new functionalities arising from the self-assembly of molecules. In particular, some peptides can self-assemble and generate exceptionally catalytically active fibrous networks able to underpin hydrogels. Unfortunately, the mechanical fragility of these materials is incompatible with process developments, relaying this exciting field to academic curiosity. Here, we show that this drawback can be circumvented by enzyme-assisted self-assembly of peptides initiated at the walls of a supporting porous material. We applied this strategy to grow an esterase-like catalytically active supramolecular hydrogel (CASH) in an open-cell polymer foam, filling the whole interior space. Our supported CASH material is highly efficient towards inactivated esters and enables the kinetic resolution of racemates. This hybrid material is robust enough to be used in continuous flow reactors, and is reusable and stable over months.

Control of Interfacial Diels-Alder Reactivity by Tuning the Plasma Polymer Properties.

Functionalizing the surface of a material with a smart plasma polymer coating is an interesting alternative strategy to obtain a thermoresponsive material without changing its formulation. On the basis of a low-pressure plasma polymerization process, the present work first aims to fabricate polymer thin films that react via the well-known thermoreversible Diels-Alder (DA) reaction (diene/dienophile cycloaddition). A two-step surface modification process based on (pulsed) plasma polymerization enables the design of functional coatings that contain furan (diene) groups. The reactivity of these surfaces with maleic anhydride (dienophile) in solution is thoroughly investigated, mainly by studying the kinetics of the DA reaction by advancing contact angle measurements. The determination of rate constants of reactions at various temperatures leads to the quantification of thermodynamic parameters such as the activation energy of the reaction as well as the enthalpy and entropy of activation related to the formation of the transition-state complex involved in the DA reaction. More interestingly, the design of furan-functionalized coatings with various physicochemical properties enables the understanding of the role played by the density of functional groups and the cross-linking rate of the polymer on the interfacial reactivity. Thus, we show in this work how to control the interfacial DA reaction on plasma coatings by tailoring the operating conditions of plasma polymerization.

Surface-Assisted Self-Assembly Strategies Leading to Supramolecular Hydrogels.

Localized molecular self-assembly processes leading to the growth of nanostructures exclusively from the surface of a material is one of the great challenges in surface chemistry. In the last decade, several works have been reported on the ability of modified or unmodified surfaces to manage the self-assembly of low-molecular-weight hydrogelators (LMWH) resulting in localized supramolecular hydrogel coatings mainly based on nanofiber architectures. This Minireview highlights all strategies that have emerged recently to initiate and localize LMWH supramolecular hydrogel formation, their related fundamental issues and applications.

Robust Alginate-Catechol@Polydopamine Free-Standing Membranes Obtained from the Water/Air Interface.

The formation of polydopamine composite membranes at the water/air interface using different chemical strategies is reported. The use of either small molecules (urea, pyrocatechol) or polymers paves the way to understand which kind of compounds can be used for the formation of PDA-composite free-standing membranes produced at the water/air interface. On the basis of these screening results, we have found that alginate grafted with catechol groups allows the formation of robust free-standing films with asymmetric composition, stimuli-responsiveness, and self-healing properties. The stickiness of these membranes depends on the relative humidity, and its adhesion behavior on PDMS was characterized using the JKR method. Thus, alginate-catechol polydopamine films appear as a new class of PDA composites, mechanically robust through covalent cross-linking and based on fully biocompatible constituting partners. These results open the door to potential applications in the biomedical field.

Control of Surface-Localized, Enzyme-Assisted Self-Assembly of Peptides through Catalyzed Oligomerization.

Localized self-assembly allowing both spatial and temporal control over the assembly process is essential in many biological systems. This can be achieved through localized enzyme-assisted self-assembly (LEASA), also called enzyme-instructed self-assembly, where enzymes present on a substrate catalyze a reaction that transforms noninteracting species into self-assembling ones. Very few LEASA systems have been reported so far, and the control of the self-assembly process through the surface properties represents one essential step toward their use, for example, in artificial cell mimicry. Here, we describe a new type of LEASA system based on α-chymotrypsin adsorbed on a surface, which catalyzes the production of (KL)nOEt oligopeptides from a KLOEt (K: lysine; L: leucine; OEt ethyl ester) solution. When a critical concentration of the formed oligopeptides is reached near the surface, they self-assemble into ß-sheets resulting in a fibrillar network localized at the interface that can extend over several micrometers. One significant feature of this process is the existence of a lag time before the self-assembly process starts. We investigate, in particular, the effect of the α-chymotrypsin surface density and KLOEt concentration on the self-assembly kinetics. We find that the lag time can be finely tuned through the surface density in α-chymotrypsin and KLOEt concentration. For a given surface enzyme concentration, a critical KLOEt concentration exists below which no self-assembly takes place. This concentration increases when the surface density in enzyme decreases.

Localized Supramolecular Peptide Self-Assembly Directed by Enzyme-Induced Proton Gradients.

Electrodes are ideal substrates for surface localized self-assembly processes. Spatiotemporal control over such processes is generally directed through the release of ions generated by redox reactions occurring specifically at the electrode. The so-used gradients of ions proved their effectiveness over the last decade but are in essence limited to material-based electrodes, considerably reducing the scope of applications. Herein is described a strategy to enzymatically generate proton gradients from non-conductive surfaces. In the presence of oxygen, immobilization of glucose oxidase (GOx) on a multilayer film provides a flow of protons through enzymatic oxidation of glucose by GOx. The confined acidic environment located at the solid-liquid interface allows the self-assembly of Fmoc-AA-OH (Fmoc=fluorenylmethyloxycarbonyl and A=alanine) dipeptides into ß-sheet nanofibers exclusively from and near the surface. In the absence of oxygen, a multilayer nanoreactor containing GOx and horseradish peroxidase (HRP) similarly induces Fmoc-AA-OH self-assembly.

Soft-Mechanochemistry: Mechanochemistry Inspired by Nature.

Cells and bacteria use mechanotransduction processes to transform a mechanical force into a chemical/biochemical response. The area of chemistry where chemical reactions are induced by mechanical forces is called mechanochemistry. Over the last few years, chemists developed force-induced reactions affecting covalent bonds in molecules under tension which requires high energy input and/or high intensity forces. In contrast, in nature, mechanotransduction processes take place with forces of much weaker intensity and much less demanding energy. They are mainly based on protein conformational changes or changes in supramacromolecular architectures. Mechanochemistry based on such low-energy-demanding processes and which does not affect chemical bonds can be called soft-mechanochemistry. In this feature article, we first discuss some examples of soft-mechanochemistry processes encountered in nature, in particular, cryptic sites, allowing us to define more precisely the concepts underlying soft-mechanochemistry. A series of examples, developed over the past few years, of chemomechanoresponsive systems based on soft-mechanochemistry principles are given. We describe, in particular, cryptic site surfaces, enzymatically active films whose activity can be modulated by stretching and films where stretching induces changes in their fluorescence properties. Finally, we give our view of the future of soft-mechanochemistry.

Selective Nanotrench Filling by One-Pot Electroclick Self-Constructed Nanoparticle Films.

Integration of nanoparticles (NPs) into nanodevices is a challenge for enhanced sensor development. Using NPs as building blocks, a bottom-up approach based on one-pot morphogen-driven electroclick chemistry is reported to self-construct dense and robust conductive Fe3O4 NP films. Deposited covalent NP assemblies establish an electrical connection between two gold electrodes separated by a 100 nm-wide nanotrench.

Morphogen Electrochemically Triggered Self-Construction of Polymeric Films Based on Mussel-Inspired Chemistry.

Inspired by the strong chemical adhesion mechanism of mussels, we designed a catechol-based electrochemically triggered self-assembly of films based on ethylene glycol molecules bearing catechol groups on both sides and denoted as bis-catechol molecules. These molecules play the role of morphogens and, in contrast to previously investigated systems, they are also one of the constituents, after reaction, of the film. Unable to interact together, commercially available poly(allylamine hydrochloride) (PAH) chains and bis-catechol molecules are mixed in an aqueous solution and brought in contact with an electrode. By application of defined potential cycles, bis-catechol molecules undergo oxidation leading to molecules bearing "reactive" quinone groups which diffuse toward the solution. In this active state, the quinones react with amino groups of PAH through Michael addition and Schiff's base condensation reaction. The application of cyclic voltammetry (CV) between 0 and 500 mV (vs Ag/AgCl, scan rate of 50 mV/s) of a PAH/bis-catechol solution results in a fast self-construction of a film that reaches a thickness of 40 nm after 60 min. The films present a spiky structure which is attributed to the use of bis-functionalized molecules as one component of the films. XPS measurements show the presence of both PAH and bis-catechol cross-linked together in a covalent way. We show that the amine/catechol ratio is an important parameter which governs the film buildup. For a given amine/catechol ratio, it does exist an optimum CV scan rate leading to a maximum of the film thickness as a function of the scan rate.

Stable Bioactive Enzyme-Containing Multilayer Films Based on Covalent Cross-Linking from Mussel-Inspired Adhesives.

The use of immobilized enzymes is mandatory for the easy separation of the enzyme, the unreacted substrates, and the obtained products to allow repeated enzymatic assays without cumbersome purification steps. The immobilization procedure is however critical to obtain a high fraction of active enzyme. In this article, we present an enzyme immobilization strategy based on a catechol functionalized alginate. We demonstrate that alkaline phosphatase (ALP) remains active in multilayered films made with alginate modified with catechol moieties (AlgCat) for long duration, that is, up to 7 weeks, provided the multilayered architecture is cross-linked with sodium periodate. This cross-linking reaction allows to create covalent bonds between the amino groups of ALP and the quinone group carried by the modified alginate. In the absence of cross-linking, the enzymatic activity is rapidly lost and this reduction is mainly due to enzyme desorption. We also show that NaIO4 cross-linked (AlgCat-Alp)n films can be freeze-dried and reused at least 3 weeks later without lost in enzymatic activity.

Film Self-Assembly of Oppositely Charged Macromolecules Triggered by Electrochemistry through a Morphogenic Approach.

The development of new surface functionalization methods that are easy to use, versatile, and allow local deposition represents a real scientific challenge. Overcoming this challenge, we present here a one-pot process that consists in self-assembling, by electrochemistry on an electrode, films made of oppositely charged macromolecules. This method relies on a charge-shifting polyanion, dimethylmaleic-modified poly(allylamine) (PAHd), that undergoes hydrolysis at acidic pH, leading to an overall switching of its charge. When a mixture of the two polyanions, PAHd and poly(styrenesulfonate) (PSS), is placed in contact with an electrode, where the pH is decreased locally by electrochemistry, the transformation of PAHd into a polycation (PAH) leads to the continuous self-assembly of a nanometric PAH/PSS film by electrostatic interactions. The pH decrease is obtained by the electrochemical oxidation of hydroquinone, which produces protons locally over nanometric distances. Using a negatively charged enzyme, alkaline phosphatase (AP), instead of PSS, this one-pot process allows the creation of enzymatically active films. Under mild conditions, self-assembled PAH/AP films have an enzymatic activity which is adjustable simply by controlling the self-assembly time. The selective functionalization of microelectrode arrays by PAH/AP was achieved, opening the route toward miniaturized biosensors.

Bioactive Seed Layer for Surface-Confined Self-Assembly of Peptides.

The design and control of molecular systems that self-assemble spontaneously and exclusively at or near an interface represents a real scientific challenge. We present here a new concept, an active seed layer that allows to overcome this challenge. It is based on enzyme-assisted self-assembly. An enzyme, alkaline phosphatase, which transforms an original peptide, Fmoc-FFY(PO4 (2-) ), into an efficient gelation agent by dephosphorylation, is embedded in a polyelectrolyte multilayer and constitutes the "reaction motor". A seed layer composed of a polyelectrolyte covalently modified by anchoring hydrogelator peptides constitutes the top of the multilayer. This layer is the nucleation site for the Fmoc-FFY peptide self-assembly. When such a film is brought in contact with a Fmoc-FFY(PO4 (2-) ) solution, a nanofiber network starts to form almost instantaneously which extents up to several micrometers into the solution after several hours. We demonstrate that the active seed layer allows convenient control over the self-assembly kinetics and the geometric features of the fiber network simply by changing its peptide density.

Influence of the interaction strength between supramolecular complexes on the topography of neutral polymer multilayer films.

Step-by-step polymer film buildup processes lead to polymer coatings, e.g., polyelectrolyte multilayers, of various structures ranging from continuous smooth films to droplet like discontinuous coatings. Yet, the origin of these different behaviors depending upon the system is not yet known. This study is a first attempt to rationalize the evolution of the coating structure as a function of the strength of the interactions between the polymers constituting the film. We investigated the influence of the strength of noncovalent host-guest interactions between cyclodextrin (CD) and pyrene (Py), ferrocene (Fc) or adamantane (Ad) on the structure of neutral poly(N-hydroxypropylmethacrylamide) (PHPMA) multilayers films formed in a step-by-step manner. In solution, the strength of the inclusion complex (measured by log K where K is the complex association constant) is increasing in the order Py/ß-CD < Fc/ß-CD < Ad/ß-CD and can be further varied in the presence of different sodium salts at different ionic strengths. Depending upon this strength, the buildup process is limited to the formation of isolated aggregates for PHPMA-CD/PHPMA-Py, leading to smooth continuous films for PHPMA-CD/PHPMA-Fc and to droplet-like films, not entirely covering the substrate, for PHPMA-CD/PHPMA-Ad. To study the influence of the strength of the host-guest interactions on the film topography, PHPMA-CD/PHPMA-Fc films were built in the presence of different sodium salts at different ionic strengths. For low host-guest interactions, only isolated aggregates are formed on the substrate. As the strength of the host-guest interactions increases (increase of log K), the formed films go through a droplet-like structure, before becoming continuous but rough for stronger interactions. When the interaction strength is further increased, the roughness of the films decreases, leading to a smooth continuous film before becoming rough again at still higher interaction strength. Smooth continuous multilayers seem thus to be obtained for an optimal range of the interaction strength.