RESUMEN
AIM: This study evaluated the effect of ultrasonic vibration on the tensile strength required to remove intraradicular post cemented with different materials. MATERIALS AND METHODS: Bovine teeth were selected, and 7 mm of the cervical root canals were prepared to size 5 Largo drill, the posts were cemented with zinc phosphate, Enforce (resin) or Rely X (glass ionomer). The specimens were divided into six groups (n = 10), according to the following procedures: GI-cementation with zinc phosphate associated with traction force; GII-cementation with zinc phosphate associated with ultrasonic activation and traction force; G111-cementation with Enforce associated with traction force; GIV-cementation with Enforce associated with ultrasonic activation and traction force; GV-cementation with Rely X associated with traction force; and GVI-cementation with Rely X associated with ultrasonic activation and traction force. The tensile test was conducted using the electromechanical testing machine, the force was determined by a specialized computer program and ultrasonic activation using the Jet Sonic Four Plus (Gnatus) device in 10P. RESULTS: Concerning to average ranking, GI showed statistically significant difference in comparison with GII and GVI (p < 0.05); there was no statistical difference in GIII and GIV when compared to other groups (p > 0.05). CONCLUSION: The ultrasound favored the intraradicular post traction regardless of the employed cement in greater or lesser extent. CLINICAL SIGNIFICANCE: The post removal is a routine practice in the dental office, therefore, new solutions and better alternatives are need to the practitioner. We did not find in the literature many articles referring to this practice. Thus, the results from this study are relevant in the case planning and to promote more treatment options.
Asunto(s)
Cementos Dentales/química , Análisis del Estrés Dental/métodos , Ultrasonido/métodos , Animales , Bovinos , Cementación/métodos , Recubrimiento Dental Adhesivo , Cementos Dentales/análisis , Cemento Dental , Retención de Prótesis Dentales , Análisis del Estrés Dental/instrumentación , Técnica de Perno Muñón , Materiales de Obturación del Conducto Radicular , Resistencia a la Tracción , Diente/químicaRESUMEN
AIM: This clinical report presents a new method for retrieving separated instruments from the root canal with minimally invasive procedures. BACKGROUND: The presence of separated instrument in root canal may interfere in the endodontic treatment prognosis. There are several recommended methods to retrieve separated instruments, but some are difficult in clinically practice. CASE REPORT: This study describes two cases of separated instrument removal from the root canal using a stainless-steel prepared needle associated with a K-file. Case 1 presented a fractured gutta-percha condenser within the mandibular second premolar, it was separated during incorrect intracanal medication calcium hydroxide placement. Case 2 had a fractured sewing needle within the upper central incisor that the patient used to remove food debris from the root canal. After cervical preparation, the fractured instruments were fitted inside a prepared needle and then an endodontic instrument (#25 K-file) was adapted with clockwise turning motion between the needle inner wall and the fragment. CONCLUSION: The endodontic or atypical nonendodontic separated instrument may be easily pull on of the root canal using a single and low cost device. CLINICAL SIGNIFICANCE: The methods for retrieving separated instruments from root canal are difficult and destructive procedures. The present case describes a simple method to solve this problem.
Asunto(s)
Cavidad Pulpar/patología , Cuerpos Extraños/terapia , Preparación del Conducto Radicular/instrumentación , Hidróxido de Calcio/administración & dosificación , Niño , Falla de Equipo , Humanos , Masculino , Persona de Mediana Edad , Agujas , Retratamiento , Irrigantes del Conducto Radicular/administración & dosificación , Acero Inoxidable/químicaRESUMEN
Background: This study aimed to evaluate the bond strength and internal adaptation of customized glass fiber posts using Bulk Fill flowable composite resins (BF) and conventional composite resin. Material and Methods: Fifty bovine teeth were randomly divided (n=10) according to the following groups: G1 (control): glass fiber posts were adapted to the root canal and luted with Rely-X ARC cement (3M® ESPE); G2: fiber posts smaller than the root canal diameter were customized using Filtek™ Z350 XT (3M® ESPE) conventional composite resin, and luted similarly to Group 1. G3: posts were customized with Tetric N-Ceram Bulk Fill composite resin (Ivoclar Vivadent AG), G4: posts were customized with Filtek™ Bulk Fill Flow (3M® ESPE), and G5: posts were customized with SureFil SDRTM flow (DENTSPLY), respectively. The specimens were submitted to push-out testing and internal adaptation evaluation using optical microscopy. Push-out (MPa) and internal adaptation (%) data were subjected to ANOVA and Tukey's post-hoc tests (p = 5%). Results: No statistically significant differences were found in both evaluations (p<0.05). Conclusions: Customized glass fiber posts using different bulk fill flowable composites did not affect the post bond-strength and internal adaptation, presenting similar results to customized glass fiber posts using conventional composite or posts with no previous customization. Key words:Dental pulp, composite resins, fiber posts, glass fiber post.
RESUMEN
INTRODUCTION: Photodynamic therapy (PDT) can be employed for prosthetic space decontamination; however, its effects on adhesion of glass-fiber posts cementation systems are still unclear. PURPOSE: The aim of this study was to evaluate the effects of photodynamic therapy (PDT) on the adhesive interface between the dentin and different glass-fiber post cementation systems using a self-adhesive resin cement (RelyX U200) or a glass ionomer cement (Gold Label 1). METHOD: Forty human canine roots were endodontically-treated and prepared for fiber post. The roots were divided into four groups (n = 10), according to the PDT use and cementation protocol, as follow: G1- RelyX U200; G2: Gold Label 1; G3: PDT + RelyX U200; and G4: PDT + Gold Label 1. Afterwards, the roots were cross-sectioned and specimens from the cervical, middle and apical thirds of the post space were obtained and submitted to the push-out test. After that, the dentinal penetrability of the cementation protocol was assessed using laser confocal microscopy. CURRENT RESULTS: No significant differences were found in the bond strength values among the groups in all thirds (P > 0.05). G2 and G4 presented lower dentinal penetrability than the other groups, only in the cervical third (P < 0.05). CONCLUSION: Photodynamic therapy didn't present effects on the bonding interface between root dentin and fiber post cementation systems in both RelyX U200 and Gold Label 1, which were similar to each other.
Asunto(s)
Recubrimiento Dental Adhesivo/métodos , Cementos Dentales/química , Dentina/química , Fotoquimioterapia/métodos , Grabado Dental , Prótesis Dental , Microscopía ConfocalRESUMEN
The aim of the study was to evaluate the effects when acid etching on the dentin surface was immediately performed (I) or 7 days (D) after calcium silicate-based sealer (MTA Fillapex) removal, using 95% ethanol (E) or xylol (X). First study, 60 bovine incisor dentin specimens were impregnated with sealer and divided into six groups (n = 10): (EI), E + I; (XI), X + I; (ED), E + D; (XD), X + D, (UN), untreated and (MR), mechanical removal of sealer. Scanning electron microscopy (SEM) images (500×) were obtained from each specimen and scores assessed the sealer residues persistence. Second study, 60 specimens were similarly treated; however, the specimens were restored with composite resin after the removal protocols. Hybrid layer formation was evaluated using confocal laser microscopy (1,024×). Third study, 60 specimens were similarly obtained and subjected to micro-shear test to evaluate the effects of removal protocols on the bond strength of etch-and- rinse adhesive system to dentin. XI showed the highest persistence of sealer residues (p < .05), similar to MR (p > .05). EI showed the greatest hybrid layer extension, except in relation to UN (p < .05). XI and MR presented the lowest bond strength adhesive system to dentin (p < .05). Acid etching immediately after calcium silicate-based endodontic sealer removal using xylol presented the highest residues persistence and negatively affected the adhesive interface between dentin and etch-and-rinse adhesive system.
Asunto(s)
Compuestos de Calcio/administración & dosificación , Cementos Dentales , Grabado Dental/métodos , Dentina/efectos de los fármacos , Selladores de Fosas y Fisuras , Silicatos/administración & dosificación , Propiedades de Superficie/efectos de los fármacos , Animales , Bovinos , Incisivo/efectos de los fármacos , Microscopía Confocal , Microscopía Electrónica de RastreoRESUMEN
OBJECTIVES: To evaluate the effect of desensitizing agent containing calcium phosphate nanoparticles on the bond strength of etch-and-rinse adhesive system (Scotchbond Multi-Purpose), presence of precipitate, dentinal tubule obliteration and hybrid layer formation in dentin in comparison with potassium nitrate plus sodium fluoride or strontium chloride compounds. METHODS: 150 bovine incisors were treated with (nâ¯=â¯10): G1, Desensibilize Nano P (Ca3(PO4)2+5%KNO3+0.9%NaF); G2, Desensibilize (10%SrCl2+5%KNO3); G3, Desensibilize KF2% (5%KNO3+0.2%NaF); G4, Ultra EZ (3%KNO3+0.25%NaF) and G5, no treated (control). Scanning electron microscopy was used to assess the incidence of precipitates (500×) and obliterated dentinal tubule counts (1.000×). The adhesive system was used after all desensitization treatments. The bond strength (nâ¯=â¯40) and the fracture pattern were evaluated. Confocal laser microscopy was used to quantify the hybrid layer formation in dentin. RESULTS: G1 and G2 presented higher adhesive system bond strength (MPa) than G4 and G5, however no significant differences were observed in comparison with G3. Cohesive fracture was frequently found: G1 (58.5%), G2 (51.3%) and G3 (43.8%). G1 showed the highest incidence of precipitates and the highest number of blocked dentinal tubules. G1 and G2 presented similar hybrid layer formation and the highest hybrid layer formation values. CONCLUSIONS: Desensibilize Nano P (G1) favored the bond strength of the adhesive system to dentin, increased the precipitation of residues, obliteration of dentinal tubules, and hybrid layer formation in comparison with other agents. CLINICAL RELEVANCE: Desensitizers promote dentin obliteration, however, may affect dentin bonding.
Asunto(s)
Grabado Ácido Dental , Recubrimiento Dental Adhesivo , Animales , Bovinos , Resinas Compuestas , Dentina , Recubrimientos Dentinarios , Ensayo de Materiales , Microscopía Electrónica de Rastreo , Cementos de Resina , Resistencia a la TracciónRESUMEN
Endodontic sealer residues remaining within the pulp chamber dentin after root canal obturation and cleaning with various solvents may compromise the appearance and the durability of dental restorations. Acid etching is routinely performed prior to application of dentine adhesive systems, but is effect on residual sealer material and the optimal time-point for performing etching, are unknown. Here, we evaluated the effect of acid etching on the dentin surface when performed either immediately or 7 days after removal of the endodontic sealer with two solvents, i.e., 95% ethanol or xylol. Forty crowns fragments from bovine incisors were impregnated with sealer and divided into 4 groups (n = 10 each), according to the dentin cleaning protocol and to the acid etching time-point: G1, 95.0% ethanol and immediate acid etching; G2, xylol and immediate acid etching; G3, 95.0% ethanol and acid etching after 7 days; and G4, xylol and acid etching after 7 days. Scanning electron microscopy (SEM) images (2000 ×) were obtained from each specimen and the number of open dentinal tubules counted and compared. Another 40 fragments were similarly prepared, and SEM images were obtained (500 ×) to score and compare the persistence of sealer residues on the dentin. G4 showed the most open dentinal tubules and the least epoxy resin-based sealer residues on the dentin surface (p < 0.05). The least epoxy resin-based sealer residues was obtained when acid etching, using 37% phosphoric acid, was performed after 7 days after cleaning the dentin with xylol.
Asunto(s)
Grabado Ácido Dental/métodos , Dentina/efectos de los fármacos , Resinas Epoxi/química , Ácidos Fosfóricos/química , Materiales de Obturación del Conducto Radicular/química , Animales , Bovinos , Cavidad Pulpar/efectos de los fármacos , Microscopía Electrónica de Rastreo , Valores de Referencia , Reproducibilidad de los Resultados , Solventes/química , Propiedades de Superficie , Factores de TiempoRESUMEN
This study evaluated the effects of 10% alphatocopherol on the fracture resistance of endodontically treated teeth subjected to tooth bleaching with hydrogen peroxide and immediately restored with composite resin. Fifty bovine incisors were selected, including 10 sound teeth that constituted the control group (G1 (C)). The remaining 40 teeth, which were endodontically treated, were divided into four groups (n = 10): G2 (CR), consisting of teeth immediately restored with composite resin; G3 (HP + CR), consisting of teeth subjected to tooth bleaching with 38% hydrogen peroxide and immediately restored with composite resin; G4 (HP + SA + CR), which received treatment similar to that used for G3, but with 10% sodium ascorbate gel applied after the bleaching protocol; and G5 (HP + AT + CR), which was similar to G4 but included 10% alphatocopherol gel as an antioxidant. After 24 h, composite restorations were performed, and teeth were subjected to a fracture resistance test at a speed of 0.5 mm/min in an electromechanical testing machine. The axial force was applied with an angle of incidence of 135° relative to the long axis of the root. Data were subjected to ANOVA and Tukey tests (p = 0.05). G1 exhibited the highest fracture resistance (p < 0.05). No significant differences among the other experimental groups were observed. The 10% sodium ascorbate and 10% alphatocopherol gels did not improve the fracture resistance of endodontically treated teeth subjected to bleaching with 38% hydrogen peroxide.
Asunto(s)
Restauración Dental Permanente/efectos adversos , Blanqueamiento de Dientes/efectos adversos , Fracturas de los Dientes/prevención & control , Diente no Vital/tratamiento farmacológico , Vitaminas/química , alfa-Tocoferol/química , Análisis de Varianza , Animales , Ácido Ascórbico/química , Bovinos , Resinas Compuestas/química , Geles , Peróxido de Hidrógeno/química , Ensayo de Materiales , Reproducibilidad de los Resultados , Factores de Tiempo , Blanqueadores Dentales/químicaRESUMEN
ABSTRACT: The objective of this in vitro study was to assess the effects of two antioxidants (sodium ascorbate [SA] and alpha-tocopherol [AT]) on the adhesive interface and dentin bond strength immediately after bleaching with 38 % hydrogen peroxide (38HP) in endodontically-treated teeth. Two stages of experimentation were carried out. Bovine incisors were allocated into four groups (n = 10/group for each experiment): NB, non-bleached restored crowns; 38HP, bleached and immediately restored crowns; 38HP-SA, bleached crowns and SA use; and 38HP-AT, bleached crowns and AT use. Hybrid layer length in dentin (μm) and bond strength (MPa) were assessed with confocal microscopy laser and micro-shear bond strength (μSBS) test, respectively. Failure mode was determined by stereomicroscope. Data analysis was performed with analysis of variance (ANOVA) and Kruskal-Wallis, Dunn, Tukey, and Fisher-exact tests (a = 0.05). Higher values of hybrid layer length were observed similarly in the NB and 38HP-SA groups. The highest μSBS mean values were observed in the NB group (18 .51 ? 1.33), whereas the SBS values for 38HP-AT (1.68 ? 0.32) were similar to the 38HP group (1.61 ? 0.51) (p > 0.05) and significantly lower than the 38HP-SA group (5.78 ? 0.71). Adhesive failures were predominant in the 38HP and 38HP-AT groups. Cohesive and mixed failures were mostly observed in the NB and 38HP-SA groups, respectively. In conclusion, AT has no immediate effect on the hybrid layer formation and μSBS of dentin. Although SA promotes an increase in hybrid layer formation, it was not reflected in the μSBS values.
RESUMEN: El objetivo de este estudio in vitro fue evaluar los efectos de dos antioxidantes (ascorbato de sodio [AS] y alfa-tocoferol [AT]) sobre la interfaz adhesiva y la fuerza de unión de la dentina inmediatamente después del blanqueamiento con peróxido de hidrógeno al 38 % (38HP) en endodoncia. -Dientes tratados. Se llevaron a cabo dos etapas de experimentación. Los incisivos bovinos se dividieron en cuatro grupos (n = 10 / grupo para cada experimento): NB, coronas restauradas no blanqueadas; 38HP, coronas blanqueadas y restauradas inmediatamente; 38HP- AS, coronas blanqueadas y uso SA; y 38HP-AT, coronas blanqueadas y uso de AT. La longitud de la capa híbrida en dentina (μm) y la fuerza de unión (MPa) se evaluaron con láser de microscopía confocal y la prueba de fuerza de unión por micro-cizallamiento (μSBS), respectivamente. El modo de falla se determinó mediante estereomicroscopio. El análisis de los datos se realizó con análisis de varianza (ANOVA) y pruebas de Kruskal-Wallis, Dunn, Tukey y Fisher (α = 0,05). De manera similar, se observaron valores más altos de longitud de capa híbrida en los grupos NB y 38HP-AS. Los valores medios más altos de μSBS se observaron en el grupo NB (18,51 ? 1,33), mientras que los valores de SBS para 38HP-AT (1,68 ? 0,32) fueron similares a los del grupo 38HP (1,61 ? 0,51) (p> 0,05) y significativamente más bajos que el grupo 38HP-AS (5,78 ? 0,71). Las fallas adhesivas fueron predominantes en los grupos de 38HP y 38HP-AT. Las fallas cohesivas y mixtas se observaron principalmente en los grupos NB y 38HP-AS, respectivamente. En conclusión, la AT no tiene un efecto inmediato sobre la formación de la capa híbrida y el μSBS de dentina. Aunque AS promueve un aumento en la formación de capas híbridas, no se refleja en los valores de μSBS.
RESUMEN
Abstract: Endodontic sealer residues remaining within the pulp chamber dentin after root canal obturation and cleaning with various solvents may compromise the appearance and the durability of dental restorations. Acid etching is routinely performed prior to application of dentine adhesive systems, but is effect on residual sealer material and the optimal time-point for performing etching, are unknown. Here, we evaluated the effect of acid etching on the dentin surface when performed either immediately or 7 days after removal of the endodontic sealer with two solvents, i.e., 95% ethanol or xylol. Forty crowns fragments from bovine incisors were impregnated with sealer and divided into 4 groups (n = 10 each), according to the dentin cleaning protocol and to the acid etching time-point: G1, 95.0% ethanol and immediate acid etching; G2, xylol and immediate acid etching; G3, 95.0% ethanol and acid etching after 7 days; and G4, xylol and acid etching after 7 days. Scanning electron microscopy (SEM) images (2000 ×) were obtained from each specimen and the number of open dentinal tubules counted and compared. Another 40 fragments were similarly prepared, and SEM images were obtained (500 ×) to score and compare the persistence of sealer residues on the dentin. G4 showed the most open dentinal tubules and the least epoxy resin-based sealer residues on the dentin surface (p < 0.05). The least epoxy resin-based sealer residues was obtained when acid etching, using 37% phosphoric acid, was performed after 7 days after cleaning the dentin with xylol.
Asunto(s)
Animales , Bovinos , Ácidos Fosfóricos/química , Materiales de Obturación del Conducto Radicular/química , Grabado Ácido Dental/métodos , Dentina/efectos de los fármacos , Resinas Epoxi/química , Valores de Referencia , Solventes/química , Propiedades de Superficie , Factores de Tiempo , Microscopía Electrónica de Rastreo , Reproducibilidad de los Resultados , Cavidad Pulpar/efectos de los fármacosRESUMEN
Abstract This study evaluated the effects of 10% alphatocopherol on the fracture resistance of endodontically treated teeth subjected to tooth bleaching with hydrogen peroxide and immediately restored with composite resin. Fifty bovine incisors were selected, including 10 sound teeth that constituted the control group (G1 (C)). The remaining 40 teeth, which were endodontically treated, were divided into four groups (n = 10): G2 (CR), consisting of teeth immediately restored with composite resin; G3 (HP + CR), consisting of teeth subjected to tooth bleaching with 38% hydrogen peroxide and immediately restored with composite resin; G4 (HP + SA + CR), which received treatment similar to that used for G3, but with 10% sodium ascorbate gel applied after the bleaching protocol; and G5 (HP + AT + CR), which was similar to G4 but included 10% alphatocopherol gel as an antioxidant. After 24 h, composite restorations were performed, and teeth were subjected to a fracture resistance test at a speed of 0.5 mm/min in an electromechanical testing machine. The axial force was applied with an angle of incidence of 135° relative to the long axis of the root. Data were subjected to ANOVA and Tukey tests (p = 0.05). G1 exhibited the highest fracture resistance (p < 0.05). No significant differences among the other experimental groups were observed. The 10% sodium ascorbate and 10% alphatocopherol gels did not improve the fracture resistance of endodontically treated teeth subjected to bleaching with 38% hydrogen peroxide.