How does alendronate affect orthodontic tooth movement in osteogenesis imperfecta: an in vivo study on a mice model.

OBJECTIVES: The purpose of this study was to evaluate the effects of alendronate on orthodontic tooth movement (OTM) and bone modelling/remodelling in an osteogenesis imperfecta (OI) mice model. MATERIALS AND METHODS: Ten-week-old male and female OI mice (Col1a2oim, n = 32) were divided into four groups: 1. Alendronate male (AM, n = 8), 2. Alendronate female (AF, n = 8), 3. saline male (SM, n = 8), and 4. saline female (SF, n = 8). The mice in all four groups received either Alendronate (0.05 mg/kg) or vehicle (saline 0.05 mg/kg) subcutaneously for 2 weeks prior to the placement of orthodontic spring. A nickel-titanium spring applying 3-5 cN of force was used to perform the OTM for 1 week. After 7 days of OTM, the OI mice were euthanized with CO2 inhalation and microfocus computed tomography and histological analyses were performed. RESULTS: AM and AF mice showed a significant decrease (P < 0.05) in the rate of OTM compared with SM and SF mice, respectively. In addition, AM and AF mice showed a significant increase (P < 0.05) in the bone volume fraction (BVF) and tissue density (TD) compared with SM and SF mice. Histological analysis of haematoxylin-eosin staining revealed a hyalinization zone in AM and AF mice compared with SM and SF mice. Furthermore, tartrate-resistant acid phosphatase staining indicated decreased number of osteoclasts in AM and AF mice compared with SM and SF mice. Picrosirius red staining showed, Alendronate treatment led to thick uniform and smooth morphology of collagen fibres as compared with saline group. Similarly, second harmony generation images also revealed thicker collagen fibres at the periodontal ligament (PDL)-cementum entheses and PDL-alveolar bone entheses in AM and AF mice compared with SM and SF mice. CONCLUSIONS: Alendronate led to a decrease in the rate of OTM, increase in BVF and TD, decrease in the number of osteoclasts, and smooth and thick collagen fibres compared with saline in both male and female OI mice.

Vitamin E enriched diet increases the rate of orthodontic tooth movement.

INTRODUCTION: Vitamin E is a popular antioxidant suggested to affect bone turnover. However, the effects of a vitamin E enriched diet on the rate of tooth movement are unknown. Therefore, this study aimed to evaluate tooth movement in rats receiving a vitamin E enriched diet. In addition, we examined bone remodeling in experimental and control rats. METHODS: Thirty-two 6-week-old male rats were divided into 4 groups: (1) group 1 (n = 8): orthodontic tooth movement (OTM) for 4 days + regular diet; (2) group 2 (n = 8): OTM for 14 days + regular diet; (3) group 3 (n = 8): OTM for 4 days + vitamin E diet; and (4) group 4 (n = 8) - OTM for 14 days + vitamin E diet. Maxillary alveolar bones and femurs of rats were analyzed by microcomputed tomography and histology. RESULTS: Rats fed a vitamin E diet presented an increased OTM rate at days 4 and 14. We found an increased number of osteoclasts and decreased bone volume in the vitamin E diet group at day 14 of OTM. In addition, there was increased expression of the microphthalmia-associated transcription factor in the alveolar bone of the vitamin E diet group. In contrast, there was no difference in bone remodeling in femurs or alveolar bone at the control side. CONCLUSIONS: We found that an enriched vitamin E diet increases the rate of OTM in rats, suggesting that vitamin E may be useful as an avenue to accelerate OTM.

The effect of differential force system and minimal surgical intervention on orthodontic tooth movement and root resorption.

OBJECTIVE: The primary objective of this study was to quantify the orthodontic tooth movement (OTM) and orthodontically induced root resorption (OIRR) with differential force system in conjunction with minimal surgical insult. MATERIAL AND METHODS: 15-week-old, 48 male Wistar rats were used in the research and were randomly divided into six groups: 1. Group 1 (8 Wistar rats): OTM for 14 days with 8-g force; 2. Group 2 (8 Wistar rats): OTM for 14 days with 25-g force; 3. Group 3 (8 Wistar rats): OTM for 14 days with 100-g force; 4. Group 4 (8 Wistar rats): OTM for 14 days with 8-g force and alveolar decortications (ADs); 5. Group 5 (8 Wistar rats): OTM for 14 days with 25-g force and ADs; 6. Group 6 (8 Wistar rats): OTM for 14 days with 100-g force and ADs. A nickel-titanium spring was used to protract the molar mesially using maxillary incisors as an anchorage. ADs (minimal surgical insult) were done using a hand piece and a round bur, adjacent to the left first maxillary molar on the palatal alveolar bone. After 14 days of OTM, Wistar rats were killed and microfocus computed tomography and histological analysis were performed. RESULTS: The 100-g group showed significant increase (P < 0.05) in OTM. However, with ADs, the OTM was significantly higher (P < 0.05) in 8 and 100 g. In addition, with ADs, there is significant increase (P < 0.05) in OIRR and significant decrease (P < 0.05) in bone volume fraction. Histological quantification of tartrate-resistant acid phosphatase indicated a significant increase (P < 0.05) in the number of osteoclasts with ADs when compared without ADs. CONCLUSIONS: Light force in conjunction with ADs are optimal to accelerate the OTM. Additionally, ADs increases the OIRR.

Raloxifene administration enhances retention in an orthodontic relapse model.

BACKGROUND AND OBJECTIVES: Orthodontic relapse is a physiologic process that involves remodelling of the alveolar bone and principle periodontal ligament fibres. Raloxifene is an Food and Drug Administration (FDA)-approved selective oestrogen receptor modulator that inhibits systemic bone loss. In our study, we examined the effects of Raloxifene on alveolar bone modelling and orthodontic relapse in a rodent model. MATERIALS AND METHODS: The efficacy of raloxifene was evaluated in 15-week-old male Wistar rats, 8 in each group (Control, Raloxifene, Raloxifene + 7-day relapse, Raloxifene + 14-day relapse) for a total of 42 days. All animals had 14 days of orthodontic tooth movement with a closed nickel-titanium coil spring tied from incisors to right first molar applying 5-8 gm of force. On the day of appliance removal, impression was taken with silicon material and the distance between first molar and second molar was filled with light-cured adhesive resin cement for retention phase. Raloxifene Retention, Raloxifene Retention + 7D, Raloxifene Retention + 14D groups received 14 daily doses of raloxifene (2.0 mg/kg/day) subcutaneously after orthodontic tooth movement during retention. After 14 days of retention, the retainer was removed and right first molar was allowed to relapse for a period of 14 days. Raloxifene injection continued for the Raloxifene + 14-day relapse group during relapse phase too. Control group received saline injections during retention. Animals were euthanized by CO2 inhalation. The outcome measure included percentage of relapse, bone volume fraction, tissue density, and histology analysis using tartrate-resistant acid phosphatase staining and determining receptor activator of nuclear factor-кB-ligand (RANKL) and osteoprotegerin expression. RESULTS: Raloxifene Retention + 14D group had significantly less (P < 0.05) orthodontic relapse when compared with other groups. There was a significant increase (P < 0.05) in bone volume fraction and tissue density in the Raloxifene Retention + 14D group when compared with other groups. Similarly, there was significant decrease in number of osteoclasts and RANKL expression in Raloxifene Retention + 14D group when compared with Raloxifene Retention + 7D group (P < 0.05). CONCLUSION: Raloxifene could decrease post-orthodontic treatment relapse by decreasing bone resorption and indirectly enhancing bone formation.

The effect of low-frequency mechanical vibration on retention in an orthodontic relapse model.

OBJECTIVE: To investigate the effect of low-frequency mechanical vibration (LFMV) on the prevention of relapse after active orthodontic tooth movement, bone volume fraction (BVF), tissue density, and the integrity of periodontal ligament. MATERIALS AND METHODS: Thirty male CD1, 12-week-old mice were used for the study. Mice were randomly divided into three groups: 1. control group, 2. relapse group, and 3. relapse + 30 Hz vibration group. In the control group, first molar was moved mesially for 7 days using nickel-titanium coil spring delivering 10g of force, whereas in relapse and relapse + 30 Hz groups, first molar was moved mesially for 7 days and then orthodontic force was removed and molar was allowed to relapse for 7 days. In relapse + 30 Hz group, LFMVs were applied at 30 Hz. Micro-focus computed tomography (micro-CT) was used for tooth movement measurements (relapse), BVF, and tissue density. Additionally, immunostaining for sclerostin, tartrate-resistant acid phosphatase staining, and picro-sirius red staining were performed on histological sections. RESULTS: LFMV at 30 Hz showed a tendency to decrease relapse but was not statistically significant. Micro-CT analysis showed a trend towards increase in BVF and tissue density with application of LFMV. Sclerostin expression was decreased with 30 Hz vibration. Additionally, the picro-sirius staining showed that LFMV at 30 Hz helped in maintaining the thickness and integrity of collagen fibres in periodontal ligament. LIMITATIONS: This is an animal study and extrapolation of the current findings to the clinical situation must be done with caution, as there is no osteonal remodelling (secondary remodelling) in mice when compared to humans. CONCLUSION: There was no statistically significant difference in the amount of relapse between the relapse-only and relapse + 30 Hz groups. However, there was a trend of decrease in relapse with 30 Hz mechanical vibration.

Effect of low-frequency mechanical vibration on orthodontic tooth movement.

INTRODUCTION: Our objective was to investigate the effect of low-frequency mechanical vibration (LFMV) on the rate of tooth movement, bone volume fraction, tissue density, and the integrity of the periodontal ligament. Our null hypothesis was that there would be no difference in the amount of tooth movement between different values of LFMV. METHODS: Sixty-four male CD1 mice, 12 weeks old, were used for orthodontic tooth movement. The mice were randomly divided into 2 groups: control groups (baseline; no spring + 5 Hz; no spring + 10 Hz; and no spring + 20 Hz) and experimental groups (spring + no vibration; spring + 5 Hz; spring + 10 Hz; and spring + 20 Hz). In the experimental groups, the first molars were moved mesially for 2 weeks using nickel-titanium coil springs delivering 10 g of force. In the control and experimental groups, LFMV was applied at 5, 10, or 20 Hz. Microfocus x-ray computed tomography analysis was used for tooth movement measurements, bone volume fraction, and tissue density. Additionally, immunostaining for sclerostin, tartrate-resistant acid phosphatase (TRAP) staining, and picrosirius red staining were used on the histologic sections. Simple descriptive statistics were used to summarize the data. Kruskal-Wallis tests were used to compare the outcomes across treatment groups. RESULTS: LFMV did not increase the rate of orthodontic tooth movement. Microfocus x-ray computed tomography analysis showed increases in bone volume fractions and tissue densities with applications of LFMV. Sclerostin expression was decreased with 10 and 20 Hz vibrations in both the control and experimental groups. Additionally, the picrosirius staining showed that LFMV helped in maintaining the thickness and integrity of collagen fibers in the periodontal ligament. CONCLUSIONS: There was no significant increase in tooth movement by applying LFMV when compared with the control groups (spring + no vibration).

Effect of corticision and different force magnitudes on orthodontic tooth movement in a rat model.

INTRODUCTION: The aims of this study were to evaluate the effect of 2 distinct magnitudes of applied force with and without corticision (flapless corticotomy) on the rate of tooth movement and to examine the alveolar response in a rat model. METHODS: A total of 44 male rats (6 weeks old) were equally divided into 4 experimental groups based on force level and surgical intervention: light force, light force with corticision, heavy force, and heavy force with corticision. The forces were delivered from the maxillary left first molar to the maxillary incisors using prefabricated 10-g (light force) or 100-g (heavy force) nickel-titanium springs. The corticision procedure was performed at appliance placement and repeated 1 week later on the mesiopalatal aspect of the maxillary left first molars, with the right sides serving as the untreated controls. Microcomputed tomography was used to evaluate tooth movement between the maxillary first and second molars, and the alveolar response in the region of the maxillary first molar on day 14. Osteoclasts and odontoclasts were quantified, and the expression of receptor activator of nuclear factor kappa ß ligand was examined. RESULTS: Intragroup comparisons of bone volume fraction (BVF) and tissue density were found to be significantly less on the loaded sides, with the exception of BVF in the light force group. Intergroup comparisons evaluating magnitude of tooth movement, BVF, apparent density, and tissue density showed no significant differences. Histomorphometric analysis indicated that BVF was decreased in the light force group. No significant differences in the total numbers of osteoclasts and odontoclasts and the expression of receptor activator of nuclear factor kappa ß ligand were found between the groups. CONCLUSIONS: No differences in tooth movement or alveolar response were observed with microcomputed tomography based on force level or corticision procedure. A flapless surgical insult in the mesiopalatal aspect of the first molar with a single-site corticision was unable to induce clinical or histologic changes after 2 weeks of orthodontic tooth movement regardless of the force magnitude. Histologic analysis of the furcation area showed that light force significantly decreased BVF.

FGF Ligands and Receptors in Osteochondral Tissues of the Temporomandibular Joint in Young and Aging Mice.

OBJECTIVE: Fibroblast growth factors (FGFs) are a family of 22 proteins and 4 FGF receptors (FGFRs) that are crucial elements for normal development. The contribution of different FGFs and FGFRs for the homeostasis or disease of the cartilage from the mandibular condyle is unknown. Therefore, our goal was to characterize age-related alterations in the protein expression of FGF ligands and FGFRs in the mandibular condyle of mice. METHOD: Mandibular condyles of 1-, 6-, 12-, 18-, and 24-month-old C57BL/6J male mice (5 per group) were collected and histologically sectioned. Immunofluorescence for FGFs that have been reported to be relevant for chondrogenesis (FGF2, FGF8, FGF9, FGF18) as well as the activated/phosphorylated FGFRs (pFGFR1, pFGFR3) was carried out. RESULTS: FGF2 and FGF8 were strongly expressed in the cartilage and subchondral bone of 1-month-old mice, but the expression shifted mainly to the subchondral bone as mice aged. FGF18 and pFGFR3 expression was limited to the cartilage of 1-month-old mice only. Meanwhile, pFGFR1 and FGF9 were mostly limited to the cartilage with a significant increase in expression as mice aged. CONCLUSIONS: Our results indicate FGF2 and FGF8 are important growth factors for mandibular condylar cartilage growth in young mice but with limited role in the cartilage of older mice. In addition, the increased expression of pFGFR1 and FGF9 and the decreased expression of pFGFR3 and FGF18 as mice aged suggest the association of these factors with aging and osteoarthritis of the cartilage of the mandibular condyle.

Acceleration of orthodontic tooth movement and root resorption with near and distant surgical insults: An in-vivo study on a rat model.

OBJECTIVE: The purpose of this study was to determine the effects of alveolar decortications (AD) closer and farther from the tooth on Orthodontic tooth movement (OTM) and root resorption. MATERIALS AND METHODS: Twenty-four Wistar rats (age 17 weeks) were used in the study. Three groups were formed by randomly dividing the rats into: 1) Control Group (N=8): OTM (14 days) without any surgical insult; 2) Near Group (N=8) OTM (14 days)+Alveolar Decortications (AD) adjacent to roots of the maxillary first molar; 3) Far Group (N=8) OTM (14 days)+AD 5mm away from the roots of the maxillary first molar. OTM was performed using a closed coil Nickel-Titanium (NiTi) spring to apply a mesial force on maxillary first molars of 8-10 grams. AD was performed with high-speed quarter round bur on the palatal aspect of alveolar bone. The rats were euthanized after 2 weeks of OTM and microfocus computed tomography and histological analysis were performed. RESULTS: Near-AD and Far-AD groups exhibited significantly increased OTM and reduction of Bone volume fraction compared to control. The root volume was significantly decreased (increased root resorption) in the Near-AD group. Histological analysis showed no statistically significant difference between the groups. CONCLUSIONS: Alveolar decortications lead to a significant increase in the rate of OTM. Increased root resorption was observed when the alveolar decortications were performed close to the maxillary molar.

The role of inhibition of osteocyte apoptosis in mediating orthodontic tooth movement and periodontal remodeling: a pilot study.

BACKGROUND: Orthodontic tooth movement (OTM) has been shown to induce osteocyte apoptosis in alveolar bone shortly after force application. However, how osteocyte apoptosis affects orthodontic tooth movement is unknown. The goal of this study was to assess the effect of inhibition of osteocyte apoptosis on osteoclastogenesis, changes in the alveolar bone density, and the magnitude of OTM using a bisphosphonate analog (IG9402), a drug that affects osteocyte and osteoblast apoptosis but does not affect osteoclasts. MATERIAL AND METHODS: Two sets of experiments were performed. Experiment 1 was used to specifically evaluate the effect of IG9402 on osteocyte apoptosis in the alveolar bone during 24 h of OTM. For this experiment, twelve mice were divided into two groups: group 1, saline administration + OTM24-h (n=6), and group 2, IG9402 administration + OTM24-h (n=6). The contralateral unloaded sides served as the control. The goal of experiment 2 was to evaluate the role of osteocyte apoptosis on OTM magnitude and osteoclastogenesis 10 days after OTM. Twenty mice were divided into 4 groups: group 1, saline administration without OTM (n=5); group 2, IG9402 administration without OTM (n=5); group 3, saline + OTM10-day (n=6); and group 4, IG9402 + OTM10-day (n=4). For both experiments, tooth movement was achieved using Ultra Light (25g) Sentalloy Closed Coil Springs attached between the first maxillary molar and the central incisor. Linear measurements of tooth movement and alveolar bone density (BVF) were assessed by MicroCT analysis. Cell death (or apoptosis) was assessed by terminal dUTP nick-end labeling (TUNEL) assay, while osteoclast and macrophage formation were assessed by tartrate-resistant acid phosphatase (TRAP) staining and F4/80+ immunostaining. RESULTS: We found that IG9402 significantly blocked osteocyte apoptosis in alveolar bone (AB) at 24 h of OTM. At 10 days, IG9402 prevented OTM-induced loss of alveolar bone density and changed the morphology and quality of osteoclasts and macrophages, but did not significantly affect the amount of tooth movement. CONCLUSION: Our study demonstrates that osteocyte apoptosis may play a significant role in osteoclast and macrophage formation during OTM, but does not seem to play a role in the magnitude of orthodontic tooth movement.

Use of an alpha-smooth muscle actin GFP reporter to identify an osteoprogenitor population.

Identification of a reliable marker of skeletal precursor cells within calcified and soft tissues remains a major challenge for the field. To address this, we used a transgenic model in which osteoblasts can be eliminated by pharmacological treatment. Following osteoblast ablation a dramatic increase in a population of alpha-smooth muscle actin (alpha-SMA) positive cells was observed. During early recovery phase from ablation we have detected cells with the simultaneous expression of alpha-SMA and a preosteoblastic 3.6GFP marker, indicating the potential for transition of alpha-SMA+ cells towards osteoprogenitor lineage. Utilizing alpha-SMAGFP transgene, alpha-SMAGFP+ positive cells were detected in the microvasculature and in the osteoprogenitor population within bone marrow stromal cells. Osteogenic and adipogenic induction stimulated expression of bone and fat markers in the alpha-SMAGFP+ population derived from bone marrow or adipose tissue. In adipose tissue, alpha-SMA+ cells were localized within the smooth muscle cell layer and in pericytes. After in vitro expansion, alpha-SMA+/CD45-/Sca1+ progenitors were highly enriched. Following cell sorting and transplantation of expanded pericyte/myofibroblast populations, donor-derived differentiated osteoblasts and new bone formation was detected. Our results show that cells with a pericyte/myofibroblast phenotype have the potential to differentiate into functional osteoblasts.

Responses to spaceflight of mouse mandibular bone and teeth.

OBJECTIVE: To determine if spaceflight and microgravity affect non-weight bearing bones and development and mineralization of teeth, reasoning that combining an organ and a cellular level approach can lead to greater insights about these effects. DESIGN: Mandibles and incisors of mice flown on the US STS-135 space shuttle mission and the Russian Bion-M1 satellite were studied using micro-computed tomography and immunohistochemistry. Ground controls were mice housed in standard vivarium cages and flight habitats. RESULTS: Incisor length was greater in the 13-day STS-135 flight mice than in either control group. Initial incisor mineralization occurred more posteriorly, and incisor, enamel and dentin volumes and enamel and dentin thicknesses were greater in the 30-day Bion-M1 flight and habitat control mice than in vivarium control mice. Mandibular bone volume (BV) was increased in STS-135 flight and habitat groups and decreased in Bion-M1 flight and habitat groups compared to vivarium controls. No significant histological alterations occurred, but changes were seen in the bone and tooth proteins dentin sialoprotein, amelogenin and the type II regulatory subunit of protein kinase A. The percentage of sclerostin positive osteocytes was greatest in flight mice, and greater in STS-135 flight and habitat control mice than in the corresponding Bion-M1 groups. TRAP staining, representing osteoclastic bone remodeling, differed between the two flights and corresponded with changes in BV. Interpretation of the findings was limited by a small number of flight mice, different sex and ages of the mice in the two missions, and different habitats and diets. CONCLUSIONS: Microgravity has measurable effects on mandibular bone physiology and incisor development and mineralization. The results also showed that the habitat had an effect either in flight or ground control samples, as demonstrated by the changes in BV and apparent slowing of incisor eruption. Therefore, developing appropriate habitats is critical for future spaceflight missions.

Comparison of the effects of three surgical techniques on the rate of orthodontic tooth movement in a rat model.

OBJECTIVE: To evaluate the effect of corticotomy and corticision, with and without a full mucoperiosteal flap, on the rate of tooth movement and alveolar response in a rat model. MATERIALS AND METHODS: Sixty male, 6-week-old Wistar rats were divided into five groups based on surgical procedure, as follows: control (no tooth movement), orthodontic tooth movement (OTM) only, corticotomy, corticision, and corticision with full mucoperiosteal flap (corticision + flap). A force of 10-15g was applied from the maxillary left first molar to the maxillary incisors using nickel-titanium springs. Surgery was performed at the time of appliance placement (day 0), and tooth movement occurred for 21 days. Micro-computed tomography was performed on day 21 to evaluate the amount of tooth movement and alveolar bone parameters. Histomorphometry, including tartrate-resistant acid phosphatase staining, was performed to quantify the osteoclast parameters at day 21. RESULTS: No statistical differences in the amount of OTM, bone volume fraction, and tissue density and the osteoclast parameters were found among all experimental groups. CONCLUSIONS: Corticotomy and corticision, with or without a full mucoperiosteal flap, did not show a significant effect on either the OTM magnitude or alveolar bone response.

The effect of corticision on root resorption with heavy and light forces.

OBJECTIVE: To investigate the association between corticision and different force magnitudes with the amount of root resorption. METHODS: Forty-four male Wistar rats (7 week old) were evaluated after an orthodontic spring delivering either 10 or 100 g was placed on the left maxillary first molars to move molars mesially. Experimental rats were divided into four groups, with 11 animals in each group: (1) LF, no corticision and 10 g of orthodontic force; (2) LFC, corticision and 10 g of force; (3) HF, no corticision and 100 g of force; and (4) HFC, corticision and 100 g of force. Contralateral sides were used as unloaded controls. The total duration of the experimental period was 14 days. Two-dimensional (histomorphometric) and three-dimensional (volumetric, micro-focus X-ray computed tomography [microCT]) analysis of root craters were performed on maxillary first molars. RESULTS: Histomorphometric and microCT analysis revealed a significant amount of resorptive areas in the experimental groups when compared to unloaded controls. However, no significant difference was detected in the amount of resorption among the four experimental groups. CONCLUSIONS: At day 14, neither the amount of force nor the cortical incision caused significant effect on root resorption that was registered by histomorphometric or microCT analysis.

The effect of mechanical vibration on orthodontically induced root resorption.

OBJECTIVE: To investigate the effect of low-frequency mechanical vibration (LFMV) on orthodontically induced root resorption. MATERIALS AND METHODS: Forty male CD1, 12-week-old mice were used for the study. The mice were randomly divided into five groups: group 1 (baseline)-no spring and no mechanical vibration, group 2-orthodontic spring but no vibration, group 3-orthodontic spring and 5 Hz of vibration applied to the maxillary first molar, group 4-orthodontic spring and 10 Hz of vibration applied to maxillary first molar, and group 5-orthodontic spring and 20 Hz of vibration applied to maxillary first molar. In the different experimental groups, the first molar was moved mesially for 2 weeks using a nickel-titanium coil spring delivering 10 g of force. LFMVs were applied at 5 Hz, 10 Hz, and 20 Hz. Microfocus X-ray computed tomography imaging was used to analyze root resorption. Additionally, to understand the mechanism, we applied LFMV to MC3T3 cells, and gene expression analyses were done for receptor activator of nuclear factor kappa-B ligand (RANKL) and osteoprotegerin (OPG). RESULTS: Orthodontic tooth movement leads to decreased root volume (increased root resorption craters). Our in vivo experiments showed a trend toward increase in root volume with different frequencies of mechanical vibration. In vitro gene expression analyses showed that with 20 Hz of mechanical vibration, there was a significant decrease in RANKL and a significant increase in OPG expression. CONCLUSION: There was a trend toward decreased root resorption with different LFMVs (5 Hz, 10 Hz, and 20 Hz); however, it was not more statistically significant than the orthodontic-spring-only group.

Cellular and Matrix Response of the Mandibular Condylar Cartilage to Botulinum Toxin.

OBJECTIVES: To evaluate the cellular and matrix effects of botulinum toxin type A (Botox) on mandibular condylar cartilage (MCC) and subchondral bone. MATERIALS AND METHODS: Botox (0.3 unit) was injected into the right masseter of 5-week-old transgenic mice (Col10a1-RFPcherry) at day 1. Left side masseter was used as intra-animal control. The following bone labels were intraperitoneally injected: calcein at day 7, alizarin red at day 14 and calcein at day 21. In addition, EdU was injected 48 and 24 hours before sacrifice. Mice were sacrificed 30 days after Botox injection. Experimental and control side mandibles were dissected and examined by x-ray imaging and micro-CT. Subsequently, MCC along with the subchondral bone was sectioned and stained with tartrate resistant acid phosphatase (TRAP), EdU, TUNEL, alkaline phosphatase, toluidine blue and safranin O. In addition, we performed immunohistochemistry for pSMAD and VEGF. RESULTS: Bone volume fraction, tissue density and trabecular thickness were significantly decreased on the right side of the subchondral bone and mineralized cartilage (Botox was injected) when compared to the left side. There was no significant difference in the mandibular length and condylar head length; however, the condylar width was significantly decreased after Botox injection. Our histology showed decreased numbers of Col10a1 expressing cells, decreased cell proliferation and increased cell apoptosis in the subchondral bone and mandibular condylar cartilage, decreased TRAP activity and mineralization of Botox injected side cartilage and subchondral bone. Furthermore, we observed reduced proteoglycan and glycosaminoglycan distribution and decreased expression of pSMAD 1/5/8 and VEGF in the MCC of the Botox injected side in comparison to control side. CONCLUSION: Injection of Botox in masseter muscle leads to decreased mineralization and matrix deposition, reduced chondrocyte proliferation and differentiation and increased cell apoptosis in the MCC and subchondral bone.

Histological analysis of GFP expression in murine bone.

The power for appreciating complex cellular interactions during embryonic development using green fluorescent protein (GFP) as a visual histological marker has not been applied to adult tissues due to loss of GFP signal during paraffin embedding and a high autofluorescent background, particularly in section of bone and bone marrow. Here we demonstrate that the GFP signal is well preserved in frozen sections of adult decalcified bone. Using a tape-transfer system that preserves histological relationships, GFP expression can be related to standard histological stains used in bone biology research. The choice of a dual-filter cube and a strong GFP signal makes it possible to readily distinguish at least four different GFP colors that are distinctly different from the autofluorescent background. An additional advantage of the frozen sections is better preservation of immunological epitopes that allow colocalization of an immunostained section with an endogenous GFP and a strong lacZ signal emanating from a beta-gal marker gene. We present an approach for recording multiple images from the same histological section that allows colocalization of a GFP signal with subsequent stains and procedures that destroy GFP. Examples that illustrate the flexibility for dual imaging of various fluorescent signals are described in this study. The same imaging approach can serve as a vehicle for archiving, retrieving, and sharing histological images among research groups.

Overexpression of Dlx5 in chicken calvarial cells accelerates osteoblastic differentiation.

Our laboratory and others have shown that a homeodomain protein binding site plays an important role in transcription of the Collal gene in osteoblasts. This suggests that homeodomain proteins have an important role in osteoblast differentiation. We have investigated the role of Dlx5 in osteoblastic differentiation. In situ hybridization studies indicated that Dlx5 is expressed in chick calvarial osteoblasts (cCOB) in vivo. Northern blot analysis indicated that Dlx5 expression in cultured cCOBs is induced concurrently with osteoblastic markers. To study the effect of overexpression of Dlx5 on osteoblast differentiation, we infected primary osteoblast cultures from 15-day-old embryonal chicken calvaria with replication competent retroviral vectors [RCASBP(A)] expressing Dlx5 or control replication competent avian splice acceptor brianhightiter polymerase subtype A [RCASBP(A)]. Expression of Collal, osteopontin, alkaline phosphatase, and osteocalcin messenger RNA (mRNA) occurred sooner and at higher levels in cultures infected with RCASBP(A)DLX5 than in RCASBP(A)-infected cultures. Mineralization of Dlx5-expressing cultures was evident by days 12-14, and RCAS-infected control osteoblasts did not begin to mineralize until day 17. Dlx5 also stimulated osteoblastic differentiation of calvarial cells that do not normally undergo osteoblastic differentiation in vitro. Our results suggest that Dlx5 plays an important role in inducing calvarial osteoblast differentiation.

Osteocyte death during orthodontic tooth movement in mice.

OBJECTIVE: To investigate the time course of osteocyte death in a mouse model of orthodontic tooth movement (OTM) and its association to the caspase-3 activation pathway and osteoclast formation. MATERIALS AND METHODS: Twenty-five male wild type CD-1 mice (8-12 weeks old) were loaded with an orthodontic appliance. A spring delivering 10-12 g of force was placed between the right first molar and the incisor to displace the first molar mesially. The contralateral unloaded sides served as the control. The animals were equally divided into five different time points: 6, 12, 24, and 72 hours and 7 days of orthodontic loading. Terminal deoxynucleotidyl transferase dUTP nick end labeling (TUNEL) assay, caspase-3 immunostaining, and tartrate-resistant acid phosphatase (TRAP) staining was performed on histologic sections of the first molars. The labeling was quantified in osteocytes on the compression side of the alveolar bone at each time point. RESULTS: TUNEL labeling significantly increased at 12, 24, and 72 hours after orthodontic loading; the peak was observed at 24 hours. Elevated caspase-3 labeling was noted at 12, 24, and 72 hours and 7 days after loading, although the increase was not significant. Significant osteoclast formation was initially evident after 72 hours and progressively increased up to 7 days. CONCLUSIONS: Osteocyte death during OTM peaks at 24 hours, earlier than initial osteoclast activation. However, only a slight trend for increased caspase-3 activity suggests that other mechanisms might be involved in osteocyte death during OTM.

Effect of cyclical forces on the periodontal ligament and alveolar bone remodeling during orthodontic tooth movement.

OBJECTIVE: To investigate the effect of externally applied cyclical (vibratory) forces on the rate of tooth movement, the structural integrity of the periodontal ligament, and alveolar bone remodeling. METHODS: Twenty-six female Sprague-Dawley rats (7 weeks old) were divided into four groups: CTRL (unloaded), VBO (molars receiving a vibratory stimulus only), TMO (molars receiving an orthodontic spring only), and TMO+VB (molars receiving an orthodontic spring and the additional vibratory stimulus). In TMO and TMO+VB groups, the rat first molars were moved mesially for 2 weeks using Nickel-Titanium coil spring delivering 25 g of force. In VBO and TMO+VB groups, cyclical forces at 0.4 N and 30 Hz were applied occlusally twice a week for 10 minutes. Microfocus X-ray computed tomography analysis and tooth movement measurements were performed on the dissected rat maxillae. Tartrate-resistant acid phosphatase staining and collagen fiber assessment were performed on histological sections. RESULTS: Cyclical forces significantly inhibited the amount of tooth movement. Histological analysis showed marked disorganization of the collagen fibril structure of the periodontal ligament during tooth movement. Tooth movement caused a significant increase in osteoclast parameters on the compression side of alveolar bone and a significant decrease in bone volume fraction in the molar region compared to controls. CONCLUSIONS: Tooth movement was significantly inhibited by application of cyclical forces.