Defining the Macromolecules of Tomorrow through Synergistic Sustainable Polymer Research.

Transforming how plastics are made, unmade, and remade through innovative research and diverse partnerships that together foster environmental stewardship is critically important to a sustainable future. Designing, preparing, and implementing polymers derived from renewable resources for a wide range of advanced applications that promote future economic development, energy efficiency, and environmental sustainability are all central to these efforts. In this Chemical Reviews contribution, we take a comprehensive, integrated approach to summarize important and impactful contributions to this broad research arena. The Review highlights signature accomplishments across a broad research portfolio and is organized into four wide-ranging research themes that address the topic in a comprehensive manner: Feedstocks, Polymerization Processes and Techniques, Intended Use, and End of Use. We emphasize those successes that benefitted from collaborative engagements across disciplinary lines.

Control of Photoswitching Kinetics with Strong Light-Matter Coupling in a Cavity.

Most photochemistry occurs in the regime of weak light-matter coupling, in which a molecule absorbs a photon and then performs photochemistry from its excited state. In the strong coupling regime, enhanced light-matter interactions between an optical field and multiple molecules lead to collective hybrid light-matter states called polaritons. This strong coupling leads to fundamental changes in the nature of the excited states including multi-molecule delocalized excitations, modified potential energy surfaces, and dramatically altered energy levels relative to non-coupled molecules. The effect of strong light-matter coupling on covalent photochemistry has not been well explored. Photoswitches undergo reversible intramolecular photoreactions that can be readily monitored spectroscopically. In this work, we study the effect of strong light-matter coupling on the kinetics of photoswitching within optical cavities. Reproducing prior experiments, photoswitching of spiropyran/merocyanine photoswitches is decelerated in a cavity. Fulgide photoswitches, however, show the opposite effect, with strong coupling accelerating photoswitching. While modified merocyanine switching can be explained by changes in radiative decay rates or the amount of light in the cavity, modified fulgide switching kinetics suggest direct changes to excited-state reaction kinetics.

Remolding and Deconstruction of Industrial Thermosets via Carboxylic Acid-Catalyzed Bifunctional Silyl Ether Exchange.

Convenient strategies for the deconstruction and reprocessing of thermosets could improve the circularity of these materials, but most approaches developed to date do not involve established, high-performance engineering materials. Here, we show that bifunctional silyl ether, i.e., R'O-SiR2-OR'', (BSE)-based comonomers generate covalent adaptable network analogues of the industrial thermoset polydicyclopentadiene (pDCPD) through a novel BSE exchange process facilitated by the low-cost food-safe catalyst octanoic acid. Experimental studies and density functional theory calculations suggest an exchange mechanism involving silyl ester intermediates with formation rates that strongly depend on the Si-R2 substituents. As a result, pDCPD thermosets manufactured with BSE comonomers display temperature- and time-dependent stress relaxation as a function of their substituents. Moreover, bulk remolding of pDCPD thermosets is enabled for the first time. Altogether, this work presents a new approach toward the installation of exchangeable bonds into commercial thermosets and establishes acid-catalyzed BSE exchange as a versatile addition to the toolbox of dynamic covalent chemistry.

Molecular Characterization of Polymer Networks.

Polymer networks are complex systems consisting of molecular components. Whereas the properties of the individual components are typically well understood by most chemists, translating that chemical insight into polymer networks themselves is limited by the statistical and poorly defined nature of network structures. As a result, it is challenging, if not currently impossible, to extrapolate from the molecular behavior of components to the full range of performance and properties of the entire polymer network. Polymer networks therefore present an unrealized, important, and interdisciplinary opportunity to exert molecular-level, chemical control on material macroscopic properties. A barrier to sophisticated molecular approaches to polymer networks is that the techniques for characterizing the molecular structure of networks are often unfamiliar to many scientists. Here, we present a critical overview of the current characterization techniques available to understand the relation between the molecular properties and the resulting performance and behavior of polymer networks, in the absence of added fillers. We highlight the methods available to characterize the chemistry and molecular-level properties of individual polymer strands and junctions, the gelation process by which strands form networks, the structure of the resulting network, and the dynamics and mechanics of the final material. The purpose is not to serve as a detailed manual for conducting these measurements but rather to unify the underlying principles, point out remaining challenges, and provide a concise overview by which chemists can plan characterization strategies that suit their research objectives. Because polymer networks cannot often be sufficiently characterized with a single method, strategic combinations of multiple techniques are typically required for their molecular characterization.

Remote-Controlled Exchange Rates by Photoswitchable Internal Catalysis of Dynamic Covalent Bonds.

The transesterification rate of boronate esters with diols is tunable over 14 orders of magnitude. Rate acceleration is achieved by internal base catalysis, which lowers the barrier for proton transfer. Here we report a photoswitchable internal catalyst that tunes the rate of boronic ester/diol exchange over 4 orders of magnitude. We employed an acylhydrazone molecular photoswitch, which forms a thermally stable but photoreversible intramolecular H-bond, to gate the activity of the internal base catalyst in 8-quinoline boronic ester. The photoswitch is bidirectional and can be cycled repeatedly. The intramolecular H-bond is found to be essential to the design of this photoswitchable internal catalyst, as protonating the quinoline with external sources of acid has little effect on the exchange rate.

Structure-Reactivity-Property Relationships in Covalent Adaptable Networks.

Polymer networks built out of dynamic covalent bonds offer the potential to translate the control and tunability of chemical reactions to macroscopic physical properties. Under conditions at which these reactions occur, the topology of covalent adaptable networks (CANs) can rearrange, meaning that they can flow, self-heal, be remolded, and respond to stimuli. Materials with these properties are necessary to fields ranging from sustainability to tissue engineering; thus the conditions and time scale of network rearrangement must be compatible with the intended use. The mechanical properties of CANs are based on the thermodynamics and kinetics of their constituent bonds. Therefore, strategies are needed that connect the molecular and macroscopic worlds. In this Perspective, we analyze structure-reactivity-property relationships for several classes of CANs, illustrating both general design principles and the predictive potential of linear free energy relationships (LFERs) applied to CANs. We discuss opportunities in the field to develop quantitative structure-reactivity-property relationships and open challenges.

Back electron transfer rates determine the photoreactivity of donor-acceptor stilbene complexes in a macrocyclic host.

Host-guest 2 : 1 complexation of photoreactive alkene guests improves the selectivity of [2 + 2] photodimerizations by templating alkene orientation prior to irradiation. Host-guest chemistry can also provide 1 : 1 : 1 complexes through the inclusion of electronically complementary donor and acceptor guests, but the photoreactivity of such complexes has not been investigated. We imagined that such complexes could enable selective cross-[2 + 2] photocycloadditions between donor and acceptor stilbenes. In pursuit of this strategy, we investigated a series of stilbenes and found 1 : 1 : 1 complexes with cucurbit[8]uril that exhibited charge-transfer (CT) absorption bands in the visible and near-IR regions. Irradiation of the CT band of an azastilbene, 4,4'-stilbenedicarboxylate, and cucurbit[8]uril ternary complex led to a selective cross-[2 + 2] photocycloaddition, while other substrate pairs exhibited no productive chemistry upon CT excitation. Using transient absorption spectroscopy, we were able to understand the variable photoreactivity of different stilbene donor-acceptor complexes. We found that back electron transfer following CT excitation of the photoreactive complex is positioned deep in the Marcus inverted region due to electrostatic stabilization of the ground state, allowing [2 + 2] to effectively compete with this relaxation pathway. Control reactions revealed that the cucurbit[8]uril host not only serves to template the reaction from the ground state, but also protects the long-lived radical ions formed by CT from side reactions. This protective role of the host suggests that donor-acceptor host-guest ternary complexes could be used to improve existing CT-initiated photochemistry or access new reactivity.

Light-Triggered Switching of Quantum Dot Photoluminescence through Excited-State Electron Transfer to Surface-Bound Photochromic Molecules.

This paper describes reversible "on-off" switching of the photoluminescence (PL) intensity of CdSe quantum dots (QDs), mediated by photochromic furylfulgide carboxylate (FFC) molecules chemisorbed to the surfaces of the QDs. Repeated cycles of UV and visible illumination switch the FFC between "closed" and "open" isomers. Reversible switching of the QDs' PL intensity by >80% is enabled by different rates and yields of PL-quenching photoinduced electron transfer (PET) from the QDs to the respective isomers. This difference is consistent with cyclic voltammetry measurements and density functional calculations of the isomers' frontier orbital energies. This work demonstrates fatigue-resistant modulation of the PL of a QD-molecule complex through remote control of PET. Such control potentially enables applications, such as all-optical memory, sensing, and imaging, that benefit from a fast, tunable, and reversible response to light stimuli.

Light Directs Monomer Coordination in Catalyst-Free Grignard Photopolymerization.

π-Conjugated polymers can serve as active layers in flexible and lightweight electronics and are conventionally synthesized by transition-metal-mediated polycondensation at elevated temperatures. We recently reported a photopolymerization of electron-deficient heteroaryl Grignard monomers that enables the catalyst-free synthesis of n-type π-conjugated polymers. Herein, we describe an experimental and computational investigation into the mechanism of this photopolymerization. Spectroscopic studies performed in situ and after quenching reveal that the propagating chain is a radical anion with halide end groups. DFT calculations for model oligomers suggest a Mg-templated SRN1-type coupling, in which Grignard monomer coordination to the radical anion chain avoids the formation of free sp2 radicals and allows C-C bond formation with very low barriers. We find that light plays an unusual role in the reaction, photoexciting the radical anion chain to shift electron density to the termini and thus enabling productive monomer binding.

PolyDAT: A Generic Data Schema for Polymer Characterization.

Polymers are stochastic materials that represent distributions of different molecules. In general, to quantify the distribution, polymer researchers rely on a series of chemical characterizations that each reveal partial information on the distribution. However, in practice, the exact set of characterizations that are carried out, as well as how the characterization data are aggregated and reported, is largely nonstandard across the polymer community. This scenario makes polymer characterization data highly disparate, thereby significantly slowing down the development of polymer informatics. In this work, a proposal on how structural characterization data can be organized is presented. To ensure that the system can apply universally across the entire polymer community, the proposed schema, PolyDAT, is designed to embody a minimal congruent set of vocabulary that is common across different domains. Unlike most chemical schemas, where only data pertinent to the species of interest are included, PolyDAT deploys a multi-species reaction network construct, in which every characterization on relevant species is collected to provide the most comprehensive profile on the polymer species of interest. Instead of maintaining a comprehensive list of available characterization techniques, PolyDAT provides a handful of generic templates, which align closely with experimental conventions and cover most types of common characterization techniques. This allows flexibility for the development and inclusion of new measurement methods. By providing a standard format to digitalize data, PolyDAT serves not only as an extension to BigSMILES that provides the necessary quantitative information but also as a standard channel for researchers to share polymer characterization data.

Dynamically reconfigurable complex emulsions via tunable interfacial tensions.

Emulsification is a powerful, well-known technique for mixing and dispersing immiscible components within a continuous liquid phase. Consequently, emulsions are central components of medicine, food and performance materials. Complex emulsions, including Janus droplets (that is, droplets with faces of differing chemistries) and multiple emulsions, are of increasing importance in pharmaceuticals and medical diagnostics, in the fabrication of microparticles and capsules for food, in chemical separations, in cosmetics, and in dynamic optics. Because complex emulsion properties and functions are related to the droplet geometry and composition, the development of rapid, simple fabrication approaches allowing precise control over the droplets' physical and chemical characteristics is critical. Significant advances in the fabrication of complex emulsions have been made using a number of procedures, ranging from large-scale, less precise techniques that give compositional heterogeneity using high-shear mixers and membranes, to small-volume but more precise microfluidic methods. However, such approaches have yet to create droplet morphologies that can be controllably altered after emulsification. Reconfigurable complex liquids potentially have great utility as dynamically tunable materials. Here we describe an approach to the one-step fabrication of three- and four-phase complex emulsions with highly controllable and reconfigurable morphologies. The fabrication makes use of the temperature-sensitive miscibility of hydrocarbon, silicone and fluorocarbon liquids, and is applied to both the microfluidic and the scalable batch production of complex droplets. We demonstrate that droplet geometries can be alternated between encapsulated and Janus configurations by varying the interfacial tensions using hydrocarbon and fluorinated surfactants including stimuli-responsive and cleavable surfactants. This yields a generalizable strategy for the fabrication of multiphase emulsions with controllably reconfigurable morphologies and the potential to create a wide range of responsive materials.

Using Visible Light to Tune Boronic Acid-Ester Equilibria.

We report a series of azobenzene boronic acids that reversibly control the extent of diol binding via photochemical isomerization. When the boronic acid is ortho to the azo group, the thermodynamically favored E isomer binds weakly with diols to form boronic esters. The isomerization of the (E)-azobenzene to its Z isomer enhances diol binding, and the magnitude of this enhancement is affected by the azobenzene structure. 2,6-Dimethoxy azobenzene boronic acids show an over 20-fold enhancement in binding upon E → Z isomerization, which can be triggered with red light. Competition experiments and computational studies suggest that the changes in the binding affinity originate from the stabilization of the (E)-boronic acids and the destabilization of the (E)-boronic esters. We demonstrate a correlation between diol binding and the photostationary state, such that different wavelengths of irradiation yield different quantities of the bound diol. Higher binding constants for the Z isomer relative to the E isomer were observed with all diols investigated, including cyclic diols, nitrocatechol, biologically relevant compounds, and polyols. This photoswitch was employed to "catch and release" a fluorophore-tagged diol in buffered water. By tethering this photoswitch to a poly(ethylene glycol) star polymer, we can tune the stiffness of covalent adaptable hydrogels using different wavelengths of visible light. This paper describes how structural modifications of azobenzenes can influence the isomerism-dependent thermodynamics of their dynamic covalent bonds with small molecules and macromolecules.

Optical visualization and quantification of enzyme activity using dynamic droplet lenses.

In this paper, we describe an approach to measuring enzyme activity based on the reconfiguration of complex emulsions. Changes in the morphology of these complex emulsions, driven by enzyme-responsive surfactants, modulate the transmission of light through a sample. Through this method we demonstrate how simple photodetector measurements may be used to monitor enzyme kinetics. This approach is validated by quantitative measurements of enzyme activity for three different classes of enzymes (amylase, lipase, and sulfatase), relying on two distinct mechanisms for coupling droplet morphology to enzyme activity (host-guest interactions with uncaging and molecular cleavage).

Photocontrolled Synthesis of n-Type Conjugated Polymers.

Current approaches to synthesize π-conjugated polymers (CPs) are dominated by thermally driven, transition-metal-mediated reactions. Herein we show that electron-deficient Grignard monomers readily polymerize under visible-light irradiation at room temperature in the absence of a catalyst. The product distribution can be tuned by the wavelength of irradiation based on the absorption of the polymer. Conversion studies are consistent with an uncontrolled chain-growth process; correspondingly, chain extension produces all-conjugated n-type block copolymers. Preliminary results demonstrate that the polymerization can be expanded to donor-acceptor alternating copolymers. We anticipate that this method can serve as a platform to access new architectures of n-type CPs without the need for transition-metal catalysis.

Nucleophilic (Radio)Fluorination of α-Diazocarbonyl Compounds Enabled by Copper-Catalyzed H-F Insertion.

The copper-catalyzed H-F insertion into α-diazocarbonyl compounds is described using potassium fluoride (KF) and hexafluoroisopropanol. Access to complex α-fluorocarbonyl derivatives is achieved under mild conditions, and the method is readily adapted to radiofluorination with [(18)F]KF. This late-stage strategy provides an attractive route to (18)F-labeled biomolecules.

Plastics that lose their temper on demand.

Multiple properties can be programmed into a single dynamic material by using heat.

Internal Catalysis in Dynamic Hydrogels with Associative Thioester Cross-Links.

Thioesters are an essential functional group in biosynthetic pathways, which has motivated their development as reactive handles in probes and peptide assembly. Thioester exchange is typically accelerated by catalysts or elevated pH. Here, we report the use of bifunctional aromatic thioesters as dynamic covalent cross-links in hydrogels, demonstrating that at physiologic pH in aqueous conditions, transthioesterification facilitates stress relaxation on the time scale of hundreds of seconds. We show that intramolecular hydrogen bonding is responsible for accelerated exchange, evident in both molecular kinetics and macromolecular stress relaxation. Drawing from concepts in the vitrimer literature, this system exemplifies how dynamic cross-links that exchange through an associative mechanism enable tunable stress relaxation without altering stiffness.

Side-Chain Engineering in Hydrophilic n-Type π-Conjugated Polymers for Enhanced Reactivity.

Minor changes to side chains in conjugated polymers (CPs) can have pronounced effects on polymer properties by altering backbone planarity, solubility, and interaction with ions. Here, we report the photocontrolled synthesis of hydrophilic CPs from Grignard monomers and find that switching from alkyl to oligo(ethylene glycol) (OEG) side chains changes their photoreactivity. Specifically, installing hydrophilic side chains on the same monomer core yields higher molecular weight polymers and allows polymerization to proceed with lower-energy red light. Additionally, we discover a side chain decomposition pathway for N-OEG monomers, which are prevalent in CP research. Decomposition can be overcome by adding an extra methylene unit in the side chains without compromising polymer molecular weight or hydrophilicity. Importantly, this polymerization does not require transition metal catalysts and is a promising approach to the preparation of n-type conjugated block copolymers.

Tailoring Dynamic Hydrogels by Controlling Associative Exchange Rates.

Dithioalkylidenes are a newly-developed class of conjugate acceptors that undergo thiol exchange via an associative mechanism, enabling decoupling of key material properties for sustainability, biomedical, and sensing applications. Here, we show that the exchange rate is highly sensitive to the structure of the acceptor and tunable over four orders of magnitude in aqueous environments. Cyclic acceptors exchange rapidly, from 0.95 to 15.6 M-1s-1, while acyclic acceptors exchange between 3.77x10-3 and 2.17x10-2 M-1s-1. Computational, spectroscopic, and structural data suggest that cyclic acceptors are more reactive than their acyclic counterparts because of resonance stabilization of the tetrahedral exchange intermediate. We parametrize molecular reactivity with respect to computed descriptors of the electrophilic site and leverage this insight to design a compound with intermediate characteristics. Lastly, we incorporate this dynamic bond into hydrogels and demonstrate that the characteristic stress relaxation time (τ) is directly proportional to molecular kex.