Self-Aligned van der Waals Heterojunction Diodes and Transistors.

A general self-aligned fabrication scheme is reported here for a diverse class of electronic devices based on van der Waals materials and heterojunctions. In particular, self-alignment enables the fabrication of source-gated transistors in monolayer MoS2 with near-ideal current saturation characteristics and channel lengths down to 135 nm. Furthermore, self-alignment of van der Waals p-n heterojunction diodes achieves complete electrostatic control of both the p-type and n-type constituent semiconductors in a dual-gated geometry, resulting in gate-tunable mean and variance of antiambipolar Gaussian characteristics. Through finite-element device simulations, the operating principles of source-gated transistors and dual-gated antiambipolar devices are elucidated, thus providing design rules for additional devices that employ self-aligned geometries. For example, the versatility of this scheme is demonstrated via contact-doped MoS2 homojunction diodes and mixed-dimensional heterojunctions based on organic semiconductors. The scalability of this approach is also shown by fabricating self-aligned short-channel transistors with subdiffraction channel lengths in the range of 150-800 nm using photolithography on large-area MoS2 films grown by chemical vapor deposition. Overall, this self-aligned fabrication method represents an important step toward the scalable integration of van der Waals heterojunction devices into more sophisticated circuits and systems.

Metal-Free Carbon-Based Nanomaterial Coatings Protect Silicon Photoanodes in Solar Water-Splitting.

The decreasing cost of silicon-based photovoltaics has enabled significant increases in solar electricity generation worldwide. Silicon photoanodes could also play an important role in the cost-effective generation of solar fuels, but the most successful methods of photoelectrode passivation and performance enhancement rely on a combination of precious metals and sophisticated processing methods that offset the economic arguments for silicon. Here we show that metal-free carbon-based nanomaterial coatings deposited from solution can protect silicon photoanodes carrying out the oxygen evolution reaction in a range of working environments. Purified semiconducting carbon nanotubes (CNTs) act as a hole extraction layer, and a graphene (Gr) capping layer both protects the CNT film and acts as a hole exchange layer with the electrolyte. The performance of semiconducting CNTs is found to be superior to that of metallic or unsorted CNTs in this context. Furthermore, the insertion of graphene oxide (GO) between the n-Si and CNTs reduces the overpotential relative to photoanodes with CNTs deposited on hydrogen-passivated silicon. The composite photoanode structure of n-Si/GO/CNT/Gr shows promising performance for oxygen evolution and excellent potential for improvement by optimizing the catalytic properties and stability of the graphene protective layer.

Hybrid, Gate-Tunable, van der Waals p-n Heterojunctions from Pentacene and MoS2.

The recent emergence of a wide variety of two-dimensional (2D) materials has created new opportunities for device concepts and applications. In particular, the availability of semiconducting transition metal dichalcogenides, in addition to semimetallic graphene and insulating boron nitride, has enabled the fabrication of "all 2D" van der Waals heterostructure devices. Furthermore, the concept of van der Waals heterostructures has the potential to be significantly broadened beyond layered solids. For example, molecular and polymeric organic solids, whose surface atoms possess saturated bonds, are also known to interact via van der Waals forces and thus offer an alternative for scalable integration with 2D materials. Here, we demonstrate the integration of an organic small molecule p-type semiconductor, pentacene, with a 2D n-type semiconductor, MoS2. The resulting p-n heterojunction is gate-tunable and shows asymmetric control over the antiambipolar transfer characteristic. In addition, the pentacene/MoS2 heterojunction exhibits a photovoltaic effect attributable to type II band alignment, which suggests that MoS2 can function as an acceptor in hybrid solar cells.

Probing Out-of-Plane Charge Transport in Black Phosphorus with Graphene-Contacted Vertical Field-Effect Transistors.

Black phosphorus (BP) has recently emerged as a promising narrow band gap layered semiconductor with optoelectronic properties that bridge the gap between semimetallic graphene and wide band gap transition metal dichalcogenides such as MoS2. To date, BP field-effect transistors have utilized a lateral geometry with in-plane transport dominating device characteristics. In contrast, we present here a vertical field-effect transistor geometry based on a graphene/BP van der Waals heterostructure. The resulting device characteristics include high on-state current densities (>1600 A/cm(2)) and current on/off ratios exceeding 800 at low temperature. Two distinct charge transport mechanisms are identified, which are dominant for different regimes of temperature and gate voltage. In particular, the Schottky barrier between graphene and BP determines charge transport at high temperatures and positive gate voltages, whereas tunneling dominates at low temperatures and negative gate voltages. These results elucidate out-of-plane electronic transport in BP and thus have implications for the design and operation of BP-based van der Waals heterostructures.

Multiscale, Hierarchical Patterning of Graphene by Conformal Wrinkling.

This paper describes how delamination-free, hierarchical patterning of graphene can be achieved on prestrained thermoplastic sheets by surface wrinkling. Conformal contact between graphene and the substrate during strain relief was maintained by the presence of a soft skin layer, resulting in the uniform patterning of three-dimensional wrinkles over large areas (>cm2). The graphene wrinkle wavelength was tuned from the microscale to the nanoscale by controlling the thickness of the skin layer with 1 nm accuracy to realize a degree of control not possible by crumpling, which relies on delamination. Hierarchical patterning of the skin layers with varying thicknesses enabled multiscale graphene wrinkles with predetermined orientations to be formed. Significantly, hierarchical graphene wrinkles exhibited tunable mechanical stiffness at the nanoscale without compromising the macroscale electrical conductivity.

Solution-Processed Dielectrics Based on Thickness-Sorted Two-Dimensional Hexagonal Boron Nitride Nanosheets.

Gate dielectrics directly affect the mobility, hysteresis, power consumption, and other critical device metrics in high-performance nanoelectronics. With atomically flat and dangling bond-free surfaces, hexagonal boron nitride (h-BN) has emerged as an ideal dielectric for graphene and related two-dimensional semiconductors. While high-quality, atomically thin h-BN has been realized via micromechanical cleavage and chemical vapor deposition, existing liquid exfoliation methods lack sufficient control over h-BN thickness and large-area film quality, thus limiting its use in solution-processed electronics. Here, we employ isopycnic density gradient ultracentrifugation for the preparation of monodisperse, thickness-sorted h-BN inks, which are subsequently layer-by-layer assembled into ultrathin dielectrics with low leakage currents of 3 × 10(-9) A/cm(2) at 2 MV/cm and high capacitances of 245 nF/cm(2). The resulting solution-processed h-BN dielectric films enable the fabrication of graphene field-effect transistors with negligible hysteresis and high mobilities up to 7100 cm(2) V(-1) s(-1) at room temperature. These h-BN inks can also be used as coatings on conventional dielectrics to minimize the effects of underlying traps, resulting in improvements in overall device performance. Overall, this approach for producing and assembling h-BN dielectric inks holds significant promise for translating the superlative performance of two-dimensional heterostructure devices to large-area, solution-processed nanoelectronics.

Investigation of band-offsets at monolayer-multilayer MoS2 junctions by scanning photocurrent microscopy.

The thickness-dependent band structure of MoS2 implies that discontinuities in energy bands exist at the interface of monolayer (1L) and multilayer (ML) thin films. The characteristics of such heterojunctions are analyzed here using current versus voltage measurements, scanning photocurrent microscopy, and finite element simulations of charge carrier transport. Rectifying I-V curves are consistently observed between contacts on opposite sides of 1L/ML junctions, and a strong bias-dependent photocurrent is observed at the junction. Finite element device simulations with varying carrier concentrations and electron affinities show that a type II band alignment at single layer/multilayer junctions reproduces both the rectifying electrical characteristics and the photocurrent response under bias. However, the zero-bias junction photocurrent and its energy dependence are not explained by conventional photovoltaic and photothermoelectric mechanisms, indicating the contributions of hot carriers.

Discovery of Gene Sources for Economic Traits in Hanwoo by Whole-genome Resequencing.

Hanwoo, a Korean native cattle (Bos taurus coreana), has great economic value due to high meat quality. Also, the breed has genetic variations that are associated with production traits such as health, disease resistance, reproduction, growth as well as carcass quality. In this study, next generation sequencing technologies and the availability of an appropriate reference genome were applied to discover a large amount of single nucleotide polymorphisms (SNPs) in ten Hanwoo bulls. Analysis of whole-genome resequencing generated a total of 26.5 Gb data, of which 594,716,859 and 592,990,750 reads covered 98.73% and 93.79% of the bovine reference genomes of UMD 3.1 and Btau 4.6.1, respectively. In total, 2,473,884 and 2,402,997 putative SNPs were discovered, of which 1,095,922 (44.3%) and 982,674 (40.9%) novel SNPs were discovered against UMD3.1 and Btau 4.6.1, respectively. Among the SNPs, the 46,301 (UMD 3.1) and 28,613 SNPs (Btau 4.6.1) that were identified as Hanwoo-specific SNPs were included in the functional genes that may be involved in the mechanisms of milk production, tenderness, juiciness, marbling of Hanwoo beef and yellow hair. Most of the Hanwoo-specific SNPs were identified in the promoter region, suggesting that the SNPs influence differential expression of the regulated genes relative to the relevant traits. In particular, the non-synonymous (ns) SNPs found in CORIN, which is a negative regulator of Agouti, might be a causal variant to determine yellow hair of Hanwoo. Our results will provide abundant genetic sources of variation to characterize Hanwoo genetics and for subsequent breeding.

Determination of material constants of vertically aligned carbon nanotube structures in compressions.

Different chemical vapour deposition (CVD) fabrication conditions lead to a wide range of variation in the microstructure and morphologies of carbon nanotubes (CNTs), which actually determine the compressive mechanical properties of CNTs. However, the underlying relationship between the structure/morphology and mechanical properties of CNTs is not fully understood. In this study, we characterized and compared the structural and morphological properties of three kinds of vertically aligned carbon nanotube (VACNT) arrays from different CVD fabrication methods and performed monotonic compressive tests for each VACNT array. The compressive stress-strain responses and plastic deformation were first compared and analyzed with nanotube buckling behaviours. To quantify the compressive properties of the VACNT arrays, a strain density energy function was used to determine their intrinsic material constants. Then, the structural and morphological effects on the quantified material constants of the VACNTs were statistically investigated and analogized to cellular materials with an open-cell model. The statistical analysis shows that density, defect degree, and the moment of inertia of the CNTs are key factors in the improvement of the compressive mechanical properties of VACNT arrays. This approach could allow a model-driven CNT synthesis for engineering their mechanical behaviours.

Genome-wide Association Study to Identify Quantitative Trait Loci for Meat and Carcass Quality Traits in Berkshire.

Meat and carcass quality attributes are of crucial importance influencing consumer preference and profitability in the pork industry. A set of 400 Berkshire pigs were collected from Dasan breeding farm, Namwon, Chonbuk province, Korea that were born between 2012 and 2013. To perform genome wide association studies (GWAS), eleven meat and carcass quality traits were considered, including carcass weight, backfat thickness, pH value after 24 hours (pH24), Commission Internationale de l'Eclairage lightness in meat color (CIE L), redness in meat color (CIE a), yellowness in meat color (CIE b), filtering, drip loss, heat loss, shear force and marbling score. All of the 400 animals were genotyped with the Porcine 62K SNP BeadChips (Illumina Inc., USA). A SAS general linear model procedure (SAS version 9.2) was used to pre-adjust the animal phenotypes before GWAS with sire and sex effects as fixed effects and slaughter age as a covariate. After fitting the fixed and covariate factors in the model, the residuals of the phenotype regressed on additive effects of each single nucleotide polymorphism (SNP) under a linear regression model (PLINK version 1.07). The significant SNPs after permutation testing at a chromosome-wise level were subjected to stepwise regression analysis to determine the best set of SNP markers. A total of 55 significant (p<0.05) SNPs or quantitative trait loci (QTL) were detected on various chromosomes. The QTLs explained from 5.06% to 8.28% of the total phenotypic variation of the traits. Some QTLs with pleiotropic effect were also identified. A pair of significant QTL for pH24 was also found to affect both CIE L and drip loss percentage. The significant QTL after characterization of the functional candidate genes on the QTL or around the QTL region may be effectively and efficiently used in marker assisted selection to achieve enhanced genetic improvement of the trait considered.

Facile Synthesis of Dithienobenzothiadiazoles and D18-Cl Polymer via Na2S-Mediated Rapid Thiophene-Annulations for Organic Solar Cells.

We present a novel synthetic route for the rapid construction of dithieno[3',2':3,4;2'',3'':5,6]benzo[1,2-c][1,2,5]thiadiazoles via Na2S-promoted thiophene annulation. This method facilitated the synthesis of D18-Cl polymer, known for its efficacy as a polymer donor in bulk-heterojunction polymer solar cells. Starting from commercially available 4,7-dihalo-5,6-difluorobenzo[c][1,2,5]thiadiazole, various 4,7-dialkynylated compounds were obtained through Sonogashira reaction conditions. Subsequent Na2S-promoted thiophene annulations yielded DTBT and its derivatives in excellent yields within 10 minutes. DTBT was then utilized as a precursor for the concise synthesis of D18-Cl, benefiting from reduced synthetic steps, mild reaction conditions, decreased complexity, and high overall yields. In another route, a space group-bridged DTBT was directly constructed via Na2S-promoted thiophene annulations and converted into D18-Cl through a couple of steps. This developed protocol offers a straightforward and reliable synthetic tool, conducive to reducing complexities in the production of DTBT-based organic electronic materials, thereby advancing the potential commercialization of organic solar cells.

Triflic Acid-Assisted Regioselective Bromination of Quinoxaline Derivatives Enables a Facile Synthesis of Polymer PTQ10.

Poly[(thiophene)-alt-(6,7-difluoro-2(2-hexyldecyloxy)quinoxaline)] (PTQ10) emerges as a promising candidate for donor materials in organic solar cells (OSCs) due to its high efficiency, simplified synthesis, and cost-effectiveness. The acceptor unit of PTQ10 is derived from the alkylation of 5,8-dibromo-6,7-difluoroquinoxaline-2-ol, emphasizing the importance of its economical synthesis for commercial viability. This study investigates triflic acid-assisted regioselective bromination of quinoxaline derivatives and proposes an alternative synthetic pathway for PTQ10. The developed route benefits from concise synthetic steps, a dependable procedure, and high overall yield. Starting with the condensation of 4,5-difluorobenzene-1,2-diamine with ethyl oxoacetate to yield 6,7-difluoroquinoxaline-2-ol, subsequent triflic acid-assisted regioselective bromination produces 5,8-dibromo-6,7-difluoroquinoxaline-2-ol in high yield. Alkylation under Mitsunobu reaction conditions yields 5,8-dibromo-6,7-difluoro-2-(2-hexyldecyloxy)quinoxaline, followed by polymerization with 2,5-distannylated thiophene under Stille reaction conditions to afford PTQ10. This research provides insights into efficient synthetic strategies for PTQ10, advancing its potential for commercial application in OSCs.

Emergence of the brain-border immune niches and their contribution to the development of neurodegenerative diseases.

Historically, the central nervous system (CNS) was regarded as 'immune-privileged', possessing its own distinct immune cell population. This immune privilege was thought to be established by a tight blood-brain barrier (BBB) and blood-cerebrospinal-fluid barrier (BCSFB), which prevented the crossing of peripheral immune cells and their secreted factors into the CNS parenchyma. However, recent studies have revealed the presence of peripheral immune cells in proximity to various brain-border niches such as the choroid plexus, cranial bone marrow (CBM), meninges, and perivascular spaces. Furthermore, emerging evidence suggests that peripheral immune cells may be able to infiltrate the brain through these sites and play significant roles in driving neuronal cell death and pathology progression in neurodegenerative disease. Thus, in this review, we explore how the brain-border immune niches may contribute to the pathogenesis of neurodegenerative disorders such as Alzheimer's disease (AD), Parkinson's disease (PD), and multiple sclerosis (MS). We then discuss several emerging options for harnessing the neuroimmune potential of these niches to improve the prognosis and treatment of these debilitative disorders using novel insights from recent studies.

A transparent and stretchable graphene-based actuator for tactile display.

A tactile display is an important tool to help humans interact with machines by using touch. In this paper, we present a transparent and stretchable graphene-based actuator for advanced tactile displays. The proposed actuator is composed of transparent and compliant graphene electrodes and a dielectric elastomer substrate. Since the electrode is coated onto the appointed region of the substrate layer by layer, only the area of the dielectric elastomer substrate with electrodes bumps up in response to the input voltage, which consequently produces actuation. The actuator is proven to be operable while preserving its electrical and mechanical properties even under 25% stretching. Also, the simple fabrication of the proposed actuator is cost-effective and can easily be extended to multiple arrays. The actuator is expected to be applicable to various applications including tactile displays, vari-focal lenses etc.

Evaluation of multi-layered graphene surface plasmon resonance-based transmission type fiber optic sensor.

Graphene is a zero band-gap semi-metal with remarkable electromagnetic and mechanical characteristics. This study is the first ever attempt to use graphene in the surface plasmon resonance (SPR) sensor as replacement material for gold/silver. Graphene, comprised of a single atomic layer of carbon, is a purely two-dimensional material and it is an ideal candidate for use as a biosensor because of its high surface-to-volume ratio. This sensor is based on the resonance occasion of the surface plasmon wave (SPW) according to the dielectric constants of each metal film and detected material in gas or aqueous phase. Graphene in the SPR sensor is expected to enlarge the range of analyte to bio-aerosols based on the superior electromagnetic properties of graphene. In this study, a SPR-based fiber optic sensor coated with multi-layered graphene is described. The multi-layered graphene film synthesized by chemical vapor deposition (CVD) on Ni substrate was transferred on the sensing region of an optical fiber. The graphene coated SPR sensor is used to analyze the interaction between structured DNA biotin and Streptavidin is analyzed. Transmitted light after passing through the sensing region is measured by a spectrometer and multimeter. As the light source, blue light which of 450 to 460 nm in wavelength was used. We observed the SPR phenomena in the sensor and show the contrary trends between bare fiber and graphene coated fiber. The fabricated graphene based fiber optic sensor shows excellent detection sensitivity of the interaction between structured DNA and Streptavidin.

High-performance graphene-based transparent flexible heaters.

We demonstrate high-performance, flexible, transparent heaters based on large-scale graphene films synthesized by chemical vapor deposition on Cu foils. After multiple transfers and chemical doping processes, the graphene films show sheet resistance as low as ∼43 Ohm/sq with ∼89% optical transmittance, which are ideal as low-voltage transparent heaters. Time-dependent temperature profiles and heat distribution analyses show that the performance of graphene-based heaters is superior to that of conventional transparent heaters based on indium tin oxide. In addition, we confirmed that mechanical strain as high as ∼4% did not substantially affect heater performance. Therefore, graphene-based, flexible, transparent heaters are expected to find uses in a broad range of applications, including automobile defogging/deicing systems and heatable smart windows.

Flow-dependent directional growth of carbon nanotube forests by chemical vapor deposition.

We demonstrated that the structural formation of vertically aligned carbon nanotube (CNT) forests is primarily affected by the geometry-related gas flow, leading to the change of growth directions during the chemical vapor deposition (CVD) process. By varying the growing time, flow rate, and direction of the carrier gas, the structures and the formation mechanisms of the vertically aligned CNT forests were carefully investigated. The growth directions of CNTs are found to be highly dependent on the nonlinear local gas flows induced by microchannels. The angle of growth significantly changes with increasing gas flows perpendicular to the microchannel, while the parallel gas flow shows almost no effect. A computational fluid dynamics (CFD) model was employed to explain the flow-dependent growth of CNT forests, revealing that the variation of the local pressure induced by microchannels is an important parameter determining the directionality of the CNT growth. We expect that the present method and analyses would provide useful information to control the micro- and macrostructures of vertically aligned CNTs for various structural/electrical applications.

Synthesis of ultra-long super-aligned double-walled carbon nanotube forests.

The pre-treatment (catalyst reduction with H2) time effect on the carbon nanotube (CNT) growth is reported. The total CNT height, the initial growth rate, the diameter, the number of walls, and the alignment in the CNT forests change with the catalyst reduction time. Densely packed, vertically super-aligned, double-walled CNT (DWCNT) forests with 9 mm height were synthesized in 10 hrs. We find that the density and the size of catalysts plays an important role in the alignment of the DWCNT forests, which is evidenced by atomic force microscopy (AFM), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and Raman spectroscopy.

Face Mask Policies in South Korea in Response to COVID-19.

All over the world, the critical shortage of face masks has been evident during the COVID-19 outbreak. No specific policy to solve the shortage has been shared among public health scholars and practitioners. Recently, the Korean government implemented noteworthy policies to stabilize the face mask market. This article examines the three government initiatives (Emergency Stabilization Policies) using participant observation, and what the effects of the Emergency Stabilization Policies are.

Controlling the carbon nanotube-to-medium conductivity ratio for dielectrophoretic separation.

The surface conductivity of colloidal nanotubes, induced by ionic surfactants, is known to affect alternating current dielectrophoresis, which has been actively investigated with regard to separating single-walled carbon nanotubes according to electronic type. The nanotube-to-suspending medium conductivity ratio is a primary factor for determining the dielectrophoretic behavior of semiconducting nanotubes. In this study, our theoretical and experimental analysis revealed that the suspending medium conductivity also plays an important role in controlling the conductivity ratio. This work elucidates the effects of several surfactant systems on the conductivity ratio and therefore the degree of separation between metallic and semiconducting nanotubes. The equimolar mixture of anionic and cationic surfactants was more effective than a nonionic polymer in reducing the conductivity ratio because the conductivity of colloidal nanotubes was decreased and that of the suspending medium was increased. Besides, the surfactant mixture provided a better dispersion of nanotubes. The dielectrophoretic separation was carried out using microelectrodes with a gap size of 4 mum at an electric field frequency of 10 MHz. The complete separation of nanotubes at the reduced conductivity ratio was confirmed by Raman spectroscopy and electrical transport measurements.