Silyliumylidene Ion Stabilized by Two σ-Donating Ni(0)- and Pd(0)-Fragments.

A silyliumylidene ion 2 stabilized by two σ-donating Ni(0)- and Pd(0)-fragments was successfully synthesized. Due to the σ-donation of M→Si interactions, 2 presents a pyramidalized cationic silicon center with a localized lone pair. The additional coordination of basic Pd(0) fragment to the mono-Ni(0)-stabilized silyliumylidene 1 results in a higher HOMO level and an unchanged HOMO-LUMO gap and thus, 2 remains highly reactive. Interestingly, the coordination mode at the Si center is closely related to the nature of M-ligands. Indeed, the donor/donor-stabilized silyliumylidene ion 2 has been transformed into a donor/acceptor-stabilized ion 13, featuring a trigonal planar Si center with a vacant orbital, just via a ligand exchange reaction from PCy3/NHC toward PMe3.

Stannylenes and Germylenes Stabilized by Tetradentate Bis(amidine) Ligands with a Rigid Naphthalene Backbone.

An unusual series of germylenes and stannylenes stabilized by new tetradentate bis(amidine) ligands RNC(R')N-linker-NC(R')NR with a rigid naphthalene backbone has been prepared by protonolysis reaction of Lappert's metallylenes [M(HMDS)2] (M = Ge or Sn). Germylenes and stannylenes were fully characterized by NMR spectroscopy and X-ray diffraction analysis. DFT calculations have been performed to clarify the structural and electronic properties associated with tetradentate bis(amidine) ligands. Stannylene L1Sn shows reactivity through oxidation, oxidative addition, and transmetalation reactions, affording the corresponding gallium and aluminum derivatives.

Base-Stabilized Cationic Silyne with a π-Accepting Phosphonio Substituent.

A base-stabilized C-phosphonio-Si-amino-silyne 3 was synthesized, using an original method, through a coupling reaction between two Lewis-base-stabilized low-valent species: a silyliumylidene ion 1 and a P,S-bis-ylide 2 [C(0)-complex]. This new isolable cationic silyne 3 displays remarkably high stability at room temperature [t1/2 = 7 days in tetrahydrofuran (THF)] and a unique silyne reactivity thanks to the effect of phosphonio substituent.

New Insight into the Reactivity of S,S-Bis-ylide.

The present work focuses on the reactivity of S,S-bis-ylide 2, which presents a strong nucleophilic character, as evidenced by reactions with methyl iodide and CO2, affording C-methylated salts 3 and betaine 4, respectively. The derivatization of betaine 4 affords the corresponding ester derivative 6, which is fully characterized by using NMR spectroscopy and X-ray diffraction analysis. Furthermore, an original reaction with phosphenium ions leads to the formation of a transient push-pull phosphino(sulfonio)carbene 8, which rearranges to give stabilized sulfonium ylide derivative 7.

[A Case of Unresectable Thoracic Esophageal Cancer Responding Well to Multimodal Therapy Including 5-FU plus CDDP plus Pembrolizumab].

A 51-year-old male presented with swelling on the left side of his neck. A diagnosis of thoracic esophageal cancer(Lt type 5a, squamous cell carcinoma, T3N4[16LN]M1[skin, bone, retroperitoneum, lung], cStage Ⅳb)was made, and treatment with a combination of 5-FU plus CDDP and pembrolizumab was initiated. After the 1st round of chemotherapy, there was an increase in metastases in the left cervical lymph node and skin, along with the development of back pain because of an L3 lumbar spine metastasis. Palliative radiotherapy(Σ24 Gy/6 Fr)was administered for all lesions. Subsequently, pembrolizumab was administered for the persistent decline in white blood cell and neutrophil counts. After 6 courses of pembrolizumab, computed tomography(CT)revealed an absence of lesions. Positron emission tomography/CT demonstrated no significant accumulation, prompting a diagnosis of complete response(CR). The patient is currently under pembrolizumab therapy and continues to remain in a state of CR.

Reversible Isomerization Between Silacyclopropyl Cation and Cyclic (Alkyl)(Amino)Silylene.

A phosphine-stabilized silacyclopropyl cation 2 has been synthesized and fully characterized. Of particular interest, 2 reversibly isomerizes into the corresponding seven-membered cyclic (alkyl)(amino)silylene 3 at room temperature via a formal migratory ethylene insertion into the Si-P bond. Although silylene 3 has not been spectroscopically detected, its transient formation has been evidenced by the isolation of the corresponding disilene dimer 5 as well as by trapping reactions.

Labile Base-Stabilized Silyliumylidene Ions. Non-Metallic Species Capable of Activating Multiple Small Molecules.

Several base-stabilized silyliumylidene ions (2 and 3) with different ligands were synthesized. Their behaviour appeared strongly dependent on the nature of ligand. Indeed, in contrast to the poorly reactive silyliumylidene ions 3 c,d stabilized by strongly donating ligands (DMAP, NHC), the silylene- and sulfide-supported one (2-H and 3 a) exhibits higher reactivity toward various small molecules. Furthermore, their capability to successively activate multiple small molecules was clearly demonstrated by processes involving successive reactions with silane/formamide, CO2 and H2 . Moreover, HBPin adduct of 3 a (8-C) catalyzes the hydroboration of pyridine. Of particular interest, silylene-supported silyliumylidene complex 2-H is one of the rare species able to activate two H2 molecules.

Reductive Elimination at Pb(II) Center of an (Amino)plumbylene-Substituted Phosphaketene: New Pathway for Phosphinidene Synthesis.

A stable (amino)plumbylene-substituted phosphaketene 3 was synthesized by the successive reactions of PbCl2 with two anionic reagents (lithium amidophosphine and NaPCO). Of particular interest, the thermal evolution of 3, at 80 °C, leads to the transient formation of corresponding amino- and phosphanylidene-phosphaketenes (6 and 7), via a reductive elimination at the PbII center forming new N-P and P-P bonds. Further evolution of 6 gives a new cyclic (amino)phosphanylidene phosphorane 4, which shows a unique reactivity as a phosphinidene. This result provides a new synthetic route to phosphinidenes, extending and facilitating further their access.

Lewis Base Adducts of Phosphine-Stabilized Pb(II) Cations: Synthesis and Catalytic Hydroamination of Alkynes.

Phosphine-stabilized Pb(II) cations, generated by chloride abstraction from chloroplumbylene 1, readily react with Lewis bases (L) such as phosphines and amines to give the corresponding donor-acceptor complexes 3. These complexes 3 react with phenylacetlylene via alkyne insertion into the Pb-L bond to afford the corresponding vinylplumbylenes 4. Of particular interest, the stable complex 4-HNiPr2 (with a secondary amine) can be used as a hydroamination catalyst of phenylacetylene.

A Silylene Stabilized by a σ-Donating Nickel(0) Fragment.

A donor-stabilized silylene 4 featuring a Ni0 -based donating ligand was synthesized. Complex 4 exhibits a pyramidalized and nucleophilic SiII center and shows a peculiar behavior due to the cooperative reactivity of Si and Ni centers. Calculations indicate that the orientation of Ni-ligands with respect to the silylene moiety is crucial in determining the role of the Ni-fragment (Lewis acid or Lewis base) towards silylene. Indeed, a simple 90° rotation of the Si-Ni bond, reverses the role of Ni, and transforms a classical silylene→Ni0 complex into an unprecedented Ni0 →silylene complex.

Synthesis, Characterization and Reactivity of a σ-Donating Ni0 -Stabilized Silyliumylidene Ion.

The synthesis of a silyliumylidene cation complex 2 stabilized by a Ni0 -based donating ligand is reported. Experimental and theoretical studies demonstrate that the highly electrophilic SiII center is stabilized by a dative Ni→Si σ-interaction and π-donations from the amino- and Ni-moieties. Due to the energetically close frontier orbitals localized on the Si and Ni atoms, complex 2 presents a competitive reactivity at Si and Ni sites.

Germylene-ß-sulfoxide Hemilabile Ligand in Coordination Chemistry.

We describe herein the synthesis of a germylene-ß-sulfoxide ligand, 1, and its abilities in coordination chemistry. Treatment of 1 with metal complexes [W(cod)(CO)4], [Mo(nbd)(CO)4] and [Ni(cod)2] afforded the corresponding (1)-chelated metal complexes (1)-W(CO)4 (2a), (1)-Mo(CO)4 (2b), and (1)-Ni(cod) (4a), clearly showing a bidentate ligation of the metal by the germanium(II) and sulfur centers. Coordination with [Ru(PPh3)3Cl2] afforded an unprecedented bridged bis(ruthenium) complex 3b. In the case of 4a, the hemilability of the bidentate ligand 1 was demonstrated by sulfoxide substitution by a CO ligand.

Predictors for quality of life improvement after acute osteoporotic vertebral fracture: results of post hoc analysis of a prospective randomized study.

PURPOSE: No study has investigated the clinical and radiographic risk factors for the deterioration of quality of life (QOL) beyond 6 months after osteoporotic vertebral fractures (OVF). The purpose of this study was to identify the predictors associated with poor QOL improvement after OVF. METHODS: This post hoc analysis included 166 women aged 65-85 years with acute 1-level OVFs. For the patient-reported outcome measures, scores on the European Quality of Life-5 Dimensions (EQ-5D) scale, and visual analogue scale (VAS) for low back pain were used. Lateral radiography at 0, 12, and 48 weeks and magnetic resonance imaging (MRI) at enrollment and at 48 weeks were performed. The associations between baseline variables with change scores for EQ-5D were investigated using a multiple linear regression model. RESULTS: Univariate analysis showed that time since fracture, EQ-5D score, and VAS for low back pain at 0 week showed significant association with increased EQ-5D score from 0 to 48 weeks. According to the multiple regression analysis, the following equation was obtained: increased EQ-5D score from 0 to 48 weeks = 1.305 - 0.978 × EQ-5D at 0 week - 0.021 × VAS for low back pain at 0 week - 0.006 × age + (fluid-intensity T2-weighted MR image patterns: - 0.037, except for fluid-intensity T2-weighted MR image patterns: + 0.037). CONCLUSION: In conclusion, older patients with severe low back pain and fluid-intensity T2-weighted MR image patterns were more likely to have lower QOL improvements after OVFs and may therefore need extra support to improve QOL.

Risk factors for subsequent vertebral fracture after acute osteoporotic vertebral fractures.

PURPOSE: To investigate the incidence and characteristics of subsequent vertebral fracture after osteoporotic vertebral fractures (OVFs) and identify risk factors for subsequent vertebral fractures. METHODS: This post-hoc analysis from a prospective randomized multicenter trial included 225 patients with a 48-week follow-up period. Differences between the subsequent and non-subsequent fracture groups were analyzed. RESULTS: Of the 225 patients, 15 (6.7%) had a subsequent fracture during the 48-week follow-up. The annual incidence of subsequent vertebral fracture after fresh OVFs in women aged 65-85 years was 68.8 per 1000 person-years. Most patients (73.3%) experienced subsequent vertebral fractures within 6 months. At 48 weeks, European Quality of Life-5 Dimensions, the Japanese Orthopedic Association Back Pain Evaluation Questionnaire pain-related disorder, walking ability, social life function, and lumbar function scores were significantly lower, while the visual analog scale (VAS) for low back pain was higher in patients with subsequent fracture. Cox proportional hazards analysis showed that a VAS score ≥ 70 at 0 weeks was an independent predictor of subsequent vertebral fracture. After adjustment for history of previous fracture, there was a ~ 67% reduction in the risk of subsequent vertebral fracture at the rigid-brace treatment. CONCLUSION: Women with a fresh OVF were at higher risk for subsequent vertebral fracture within the next year. Severe low back pain and use of soft braces were associated with higher risk of subsequent vertebral fractures. Therefore, when treating patients after OVFs with these risk factors, more attention may be needed for the occurrence of subsequent vertebral fractures. LEVEL OF EVIDENCE: III.

Predictors of residual low back pain after acute osteoporotic compression fracture.

BACKGROUND: Studies on the clinical and radiographic risk factors for the residual low back pain beyond 6 months after osteoporotic vertebral fractures (OVFs) are lacking. Hence, this study aimed to characterize a patient population with residual low back pain 48 weeks after acute OVFs and to identify the risk factors associated with residual low back pain. METHODS: This prospective multicenter study included 166 female patients aged 65-85 years with acute one-level OVFs. We defined the residual low back pain as visual analog scale (VAS) for low back pain ≥3.5 at 48 weeks in this study, as VAS score ≥3.5 is used to describe moderate or severe pain. Thus, outcome and risk factor analyses were performed by comparing patients with VAS scores <3.5 and ≥ 3.5. In the radiographic analysis, the anterior vertebral body compression percentage was measured at 0, 12, and 48 weeks. Magnetic resonance imaging (MRI) was performed at enrollment and 48 weeks. RESULTS: Of the 166 patients analyzed, 58 complained of residual low back pain at 48 weeks after OVFs. At 0 weeks, the VAS score was significantly higher, and the JOABPEQ mental health score and anterior vertebral body compression percentage were significantly lower in patients with persistent pain 48 weeks after OVFs. The independent risk factors in the acute phase for persistent pain 48 weeks after OVFs were a high VAS score, MRI T2 fluid-intensity image pattern, and a lower anterior vertebral body compression percentage. CONCLUSIONS: Severe low back pain, MRI T2 fluid-intensity image pattern, and severe vertebral body collapse in the acute phase were significant risk factors for residual low back pain 48 weeks after OVFs. Patients with acute OVFs who have these risk factors should be carefully monitored for the possible development of residual chronic low back pain.

Strained and Reactive Donor/Acceptor-Supported Metallasilanone.

A novel stable donor/acceptor-supported MnI -metallasilanone 3 was synthesized. The intramolecular silanone-MnI interaction induces a highly strained three-membered cyclic structure, leading to an exceptionally high reactivity of 3 as a donor/acceptor complex of silanone. Indeed, metallasilanone 3 readily reacts with various small molecules such as H2 or ethylene gas in mild conditions.

Required Chlorination Doses to Fulfill the Credit Value for Disinfection of Enteric Viruses in Water: A Critical Review.

A credit value of virus inactivation has been assigned to the disinfection step in international and domestic guidelines for wastewater reclamation and reuse. To fulfill the credit value for water disinfection, water engineers need to apply an appropriate disinfection strength, expressed as a CT value (mg × min/L), which is a product of disinfectant concentration and contact time, against enteric viruses in wastewater. In the present study, we extracted published experimental data on enteric virus inactivation using free chlorine and monochloramine and applied the Tobit analysis and simple linear regression analysis to calculate the range of CT values (mg × min/L) needed for 4-log10 inactivation. Data were selected from peer-reviewed papers containing kinetics data of virus infectivity and chlorine residual in water. Coxsackie B virus and echovirus require higher CT values (lower susceptibility) for 4-log10 inactivation than adenovirus and a human norovirus surrogate (murine norovirus) with free chlorine. On the other hand, adenovirus has lower susceptibility to monochloramine compared to murine norovirus, coxsackievirus, and echovirus. The factors that influence the required CT value are virus type, pH, water temperature, and water matrix. This systematic review demonstrates that enteroviruses and adenovirus are appropriate representative enteric viruses to evaluate water disinfection using free chlorine and monochloramine, respectively.

Collaborative Study to Validate Purity Determination by 1H Quantitative NMR Spectroscopy by Using Internal Calibration Methodology.

NMR spectroscopy has recently been utilized to determine the absolute amounts of organic molecules with metrological traceability since signal intensity is directly proportional to the number of each nucleus in a molecule. The NMR methodology that uses hydrogen nucleus (1H) to quantify chemicals is called quantitative 1H-NMR (1H qNMR). The quantitative method using 1H qNMR for determining the purity or content of chemicals has been adopted into some compendial guidelines and official standards. However, there are still few reports in the literature regarding validation of 1H qNMR methodology. Here, we coordinated an international collaborative study to validate a 1H qNMR based on the use of an internal calibration methodology. Thirteen laboratories participated in this study, and the purities of three samples were individually measured using 1H qNMR method. The three samples were all certified via conventional primary methods of measurement, such as butyl p-hydroxybenzoate Japanese Pharmacopeia (JP) reference standard certified by mass balance; benzoic acid certified reference material (CRM) certified by coulometric titration; fludioxonil CRM certified by a combination of freezing point depression method and 1H qNMR. For each sample, 1H qNMR experiments were optimized before quantitative analysis. The results showed that the measured values of each sample were equivalent to the corresponding reference labeled value. Furthermore, assessment of these 1H qNMR data using the normalized error, En-value, concluded that statistically 1H qNMR has the competence to obtain the same quantification performance and accuracy as the conventional primary methods of measurement.

Synthesis of a Stable N-Hetero-RhI -Metallacyclic Silanone.

A novel N-hetero-RhI -metallacyclic silanone 2 has been synthesized. The silanone 2, showing an extremely large dimerization energy (ΔG=+86.2 kcal mol-1 ), displays considerable stability and persists in solution up to 60 °C. Above 120 °C, an intramolecular Csp3 -H insertion occurs slowly over a period of two weeks leading to the bicyclic silanol 5. The exceptional stability of 2, related to the unusual electronic and steric effects of RhI -substituent, should allow for a more profound study and understanding of these new species. Furthermore, the metallacyclic silanone 2 presents two reactive centers (Si=O and Rh), which can be involved depending upon the nature of reagents. Of particular interest, the reaction with H2 starts with the hydrogenation of RhI center leading to the corresponding RhIII -dihydride complex 7 and it undergoes a cis/trans-isomerization via a particular mechanism, demonstrating that addition-elimination processes can also happen for silanones just like for their carbon analogues!

Sign-constrained linear regression for prediction of microbe concentration based on water quality datasets.

This study presents a novel methodology for estimating the concentration of environmental pollutants in water, such as pathogens, based on environmental parameters. The scientific uniqueness of this study is the prevention of excess conformity in the model fitting by applying domain knowledge, which is the accumulated scientific knowledge regarding the correlations between response and explanatory variables. Sign constraints were used to express domain knowledge, and the effect of the sign constraints on the prediction performance using censored datasets was investigated. As a result, we confirmed that sign constraints made prediction more accurate compared to conventional sign-free approaches. The most remarkable technical contribution of this study is the finding that the sign constraints can be incorporated in the estimation of the correlation coefficient in Tobit analysis. We developed effective and numerically stable algorithms for fitting a model to datasets under the sign constraints. This novel algorithm is applicable to a wide variety of the prediction of pollutant contamination level, including the pathogen concentrations in water.