RESUMEN
We developed an ankle-worn gait monitoring system for tracking gait parameters, including length, width, and height. The system utilizes ankle bracelets equipped with wide-angle infrared (IR) stereo cameras tasked with monitoring a marker on the opposing ankle. A computer vision algorithm we have also developed processes the imaged marker positions to estimate the length, width, and height of the person's gait. Through testing on multiple participants, the prototype of the proposed gait monitoring system exhibited notable performance, achieving an average accuracy of 96.52%, 94.46%, and 95.29% for gait length, width, and height measurements, respectively, despite distorted wide-angle images. The OptiGait system offers a cost-effective and user-friendly alternative compared to existing gait parameter sensing systems, delivering comparable accuracy in measuring gait length and width. Notably, the system demonstrates a novel capability in measuring gait height, a feature not previously reported in the literature.
RESUMEN
A novel online real-time video stabilization algorithm (LSstab) that suppresses unwanted motion jitters based on cinematography principles is presented. LSstab features a parallel realization of the a-contrario RANSAC (AC-RANSAC) algorithm to estimate the inter-frame camera motion parameters. A novel least squares based smoothing cost function is then proposed to mitigate undesirable camera jitters according to cinematography principles. A recursive least square solver is derived to minimize the smoothing cost function with a linear computation complexity. LSstab is evaluated using a suite of publicly available videos against state-of-the-art video stabilization methods. Results show that LSstab achieves comparable or better performance, which attains real-time processing speed when a GPU is used.
RESUMEN
A real-time 3D visualization (RT3DV) system using a multiview RGB camera array is presented. RT3DV can process multiple synchronized video streams to produce a stereo video of a dynamic scene from a chosen view angle. Its design objective is to facilitate 3D visualization at the video frame rate with good viewing quality. To facilitate 3D vision, RT3DV estimates and updates a surface mesh model formed directly from a set of sparse key points. The 3D coordinates of these key points are estimated from matching 2D key points across multiview video streams with the aid of epipolar geometry and trifocal tensor. To capture the scene dynamics, 2D key points in individual video streams are tracked between successive frames. We implemented a proof of concept RT3DV system tasked to process five synchronous video streams acquired by an RGB camera array. It achieves a processing speed of 44 milliseconds per frame and a peak signal to noise ratio (PSNR) of 15.9 dB from a viewpoint coinciding with a reference view. As a comparison, an image-based MVS algorithm utilizing a dense point cloud model and frame by frame feature detection and matching will require 7 seconds to render a frame and yield a reference view PSNR of 16.3 dB.
RESUMEN
Existing laparoscopic surgery systems use a single laparoscope to visualize the surgical area with a limited field of view (FoV), necessitating maneuvering the laparoscope to search a target region. In some cases, the laparoscope needs to be moved from one surgical port to another one to detect target organs. These maneuvers would cause longer surgical time and degrade the efficiency of operation. We hypothesize that if an array of cameras can be deployed to provide a stitched video with an expanded FoV and small blind spots, the time required to perform multiple tasks at different sites can be significantly reduced. We developed a micro-camera array that can enlarge the FoV and reduce blind spots between the cameras by optimizing the angle of cameras. The video stream of this micro-camera array was designed to be processed in real-time to provide a stitched video with the expanded FoV. We mounted this micro-camera array to a Fundamentals of Laparoscopic Surgery (FLS) laparoscopic trainer box and designed an experiment to validate the hypothesis above. Surgeons, residents, and a medical student were recruited to perform a modified bean drop task, and the completion time was compared against that measured using a traditional single-camera laparoscope. It was observed that utilizing the micro-camera array, the completion time of the modified bean drop task was 203 ± 55 s while using the laparoscope, the completion time was 245 ± 114 s, with a p-value of 0.00097. It is also observed that the benefit of using an FoV-expanded camera array does not diminish for subjects who are more experienced. This test provides convincing evidence and validates the hypothesis that expanded FoV with small blind spots can reduce the operation time for laparoscopic surgical tasks.
RESUMEN
PREMISE OF THE STUDY: Polymorphic microsatellite primers were developed for greater duckweed, Spirodela polyrhiza (Lemnaceae), to investigate genetic diversity and structure for application in a bioremediation program. METHODS AND RESULTS: A total of 401 publicly available S. polyrhiza whole-genome shotgun sequences were searched for simple sequence repeat loci of two or more nucleotides. Of these, 60 primer pairs were selected to analyze 68 individuals of S. polyrhiza from three populations. Nineteen polymorphic microsatellite loci were developed. A total of 108 alleles were detected with an average of 5.7 alleles per locus. The levels of expected and observed heterozygosity were 0.0511-0.8669 and 0-0.8750, respectively. Ten loci also successfully amplified in 16 individuals of Lemna perpusilla. CONCLUSIONS: The results demonstrate the broad utility of these microsatellite loci for studying population genetics in S. polyrhiza.