RESUMEN
Carbon support is essential for electrocatalysis, but limitations remain, as carbon corrosion can lead to electrocatalyst degradation and affect the long-term durability of electrocatalysts. Here, we studied the corrosion dynamics of carbon nanotubes (CNTs) and Vulcan carbon (VC) together with platinum (Pt) nanoparticles in real time by liquid cell (LC) transmission electron microscopy (TEM). The results showed that CNTs with a high degree of graphitization exhibited higher corrosion resistance compared to VC. Furthermore, we observed that the main degradation path of Pt nanoparticles in Pt/CNTs was ripening, while in Pt/VC, it was aggregation and coalescence, which was dominated by the interactions between Pt nanoparticles and different hybridization of carbon supports. Finally, we performed an ex situ CV stability test to confirm the conclusions obtained from in situ experiments. This work provides deep insights into the corrosion mechanism of carbon-supported electrocatalysts to optimize the design of electrocatalysts with a higher durability.
RESUMEN
The great potential of K1/2Bi1/2TiO3 (KBT) for dielectric energy storage ceramics is impeded by its low dielectric breakdown strength, thereby limiting its utilization of high polarization. This study develops a novel composition, 0.83KBT-0.095Na1/2Bi1/2ZrO3-0.075 Bi0.85Nd0.15FeO3 (KNBNTF) ceramics, demonstrating outstanding energy storage performance under high electric fields up to 425 kV cm-1: a remarkable recoverable energy density of 7.03 J cm-3, and a high efficiency of 86.0%. The analysis reveals that the superior dielectric breakdown resistance arises from effective mitigation of space charge accumulation at the interface, influenced by differential dielectric and conductance behaviors between grains and grain boundaries. Electric impedance spectra confirm the significant suppression of space charge accumulation in KNBNTF, attributable to the co-introduction of Na1/2Bi1/2ZrO3 and Bi0.85Nd0.15FeO3. Phase-field simulations reveal the emergence of a trans-granular breakdown mode in KNBNTF resulting from the mitigated interfacial polarization, impeding breakdown propagation and increasing dielectric breakdown resistance. Furthermore, KNBNTF exhibits a complex local polarization and enhances the relaxor features, facilitating high field-induced polarization and establishing favorable conditions for exceptional energy storage performance. Therefore, the proposed strategy is a promising design pathway for tailoring dielectric ceramics in energy storage applications.
RESUMEN
Density functional theory (DFT) calculations demonstrate neighboring Pt atoms can enhance the metal activity of NiCoP for hydrogen evolution reaction (HER). However, it remains a great challenge to link Pt and NiCoP. Herein, we introduced curvature of bowl-like structure to construct Pt/NiCoP interface by adding a minimal 1 -molar-ratio Pt. The as-prepared sample only requires an overpotential of 26.5 and 181.6â mV to accordingly achieve the current density of 10 and 500â mA cm-2 in 1â M KOH. The water dissociation energy barrier (Ea) has a ~43 % decrease compared with NiCoP counterpart. It also shows an ultrahigh stability with a small degradation rate of 10.6â µV h-1 at harsh conditions (500â mA cm-2 and 50 °C) after 3000â hrs. X-ray photoelectron spectroscopy (XPS), soft X-ray absorption spectroscopy (sXAS), and X-ray absorption fine structure (XAFS) verify the interface electron transfer lowers the valence state of Co/Ni and activates them. DFT calculations also confirm the catalytic transition step of NiCoP can change from Heyrovsky (2.71â eV) to Tafel step (0.51â eV) in the neighborhood of Pt, in accord with the result of the improved Hads at the interface disclosed by in situ electrochemical impedance spectroscopy (EIS) and scanning electrochemical microscopy (SECM) tests.
RESUMEN
Parallel nanomaterials possess unique properties and show potential applications in industry. Whereas, vertically aligned 2D nanomaterials have plane orientations that are generally chaotic. Simultaneous control of their growth direction and spatial orientation for parallel nanosheets remains a big challenge. Here, a facile preparation of vertically aligned parallel nanosheet arrays of aluminum-cobalt oxide is reported via a collaborative dealloying and hydrothermal method. The parallel growth of nanosheets is attributed to the lattice-matching among the nanosheets, the buffer layer, and the substrate, which is verified by a careful transmission electron microscopy study. Furthermore, the aluminum-cobalt oxide nanosheets exhibit high-temperature ferromagnetism with a 919 K Curie temperature and a 5.22 emu g-1 saturation magnetization at 300 K, implying the potential applications in high-temperature ferromagnetic fields.
RESUMEN
Metallic MoS2 (i.e., 1T-MoS2 ) is considered as the most promising precious-metal-free electrocatalyst with outstanding hydrogen evolution reaction (HER) performance in acidic media comparable to Pt. However, sluggish kinematics of HER in alkaline media and its inability for the oxygen evolution reaction (OER), hamper its development as bifunctional catalysts. The instability of 1T-MoS2 further impedes its applications for scaling up, calling an urgent need for simple synthesis to produce stable 1T-MoS2 . In this work, the challenge of 1T-MoS2 synthesis is first addressed using a direct one-step hydrothermal method by adopting ascorbic acid. 1T-MoS2 with flower-like morphology is obtained, and transition metals (Ni, Co, Fe) are simultaneously doped into 1T-MoS2 . Ni-1T-MoS2 achieves an enhanced bifunctional catalytic activity for both HER and OER in alkaline media, where the key role of Ni doping as single atom is proved to be essential for boosting HER/OER activity. Finally, a Ni-1T-MoS2 ||Ni-1T-MoS2 electrolyzer is fabricated, reaching a current density of 10 mA cm-2 at an applied cell voltage of only 1.54 V for overall water splitting.
Asunto(s)
Molibdeno , Agua , Catálisis , Medios de Cultivo , Hidrógeno , OxígenoRESUMEN
Pt-based catalysts can be poisoned by the chlorine formed during the oxidation of multicomponent volatile organic compounds (VOCs) containing chlorinated VOCs. Improving the low-temperature chlorine resistance of catalysts is important for industrial applications, although it is yet challenging. We hereby demonstrate the essential catalytic roles of a bifunctional catalyst with an atomic-scale metal/oxide interface constructed by an intermetallic compound nanocrystal. Introducing trichloroethylene (TCE) exhibits a less negative effect on the catalytic activity of the bimetallic catalyst for o-xylene oxidation, and the partial deactivation caused by TCE addition is reversible, suggesting that the bimetallic, HCl-etched Pt3Sn(E)/CeO2 catalyst possesses much stronger chlorine resistance than the conventional Pt/CeO2 catalyst. On the site-isolated Pt-Sn catalyst, the presence of aromatic hydrocarbon significantly inhibits the adsorption strength of TCE, resulting in excellent catalytic stability in the oxidation of the VOC mixture. Furthermore, the large amount of surface-adsorbed oxygen species generated on the electronegative Pt is highly effective for low-temperature C-Cl bond dissociation. The adjacent promoter (Sn-O) possesses the functionality of acid sites to provide sufficient protons for HCl formation over the bifunctional catalyst, which is considered critical to maintaining the reactivity of Pt by removing Cl and decreasing the polychlorinated byproducts.
RESUMEN
Pd is the only metal that can catalyze electrochemical CO2 reduction to formate at close-to-zero overpotential. It is unfortunately subjected to severe poisoning by trace CO as the side product and suffers from deteriorating stability and selectivity with increasing overpotential. Here, we demonstrate that alloying Pd with Cu in the form of two-dimensional nanodendrites could enable highly stable and selective formate production. Such unique bimetallic nanostructures are formed as a result of the rapid in-plane growth and suppressed out-of-plane growth by carefully controlling a set of experimental parameters. Thanks to the combined electronic effect and nanostructuring effect, our alloy product catalyzes CO2 reduction to formate with remarkable stability and selectivity under the working potential as cathodic as -0.4 V. Our results are rationalized by computational simulations, evidencing that Cu atoms weaken the *CO adsorption and stabilize the *OCHO adsorption on neighboring Pd atoms.
RESUMEN
Graphene, having all atoms on its surface, is favorable to extend the functions by introducing the spin-orbit coupling and magnetism through proximity effect. Here, we report the tunable interfacial exchange field produced by proximity coupling in graphene/BiFeO3 heterostructures. The exchange field has a notable dependence with external magnetic field, and it is much larger under negative magnetic field than that under positive magnetic field. For negative external magnetic field, interfacial exchange coupling gives rise to evident spin splitting for N ≠ 0 Landau levels and a quantum Hall metal state for N = 0 Landau level. Our findings suggest graphene/BiFeO3 heterostructures are promising for spintronics.
RESUMEN
Black phosphorus nanobelts are fabricated with a one-step solid-liquid-solid reaction method under ambient pressure, where red phosphorus is used as the precursor instead of white phosphorus. The thickness of the as-fabricated nanobelts ranges from micrometers to tens of nanometers as studied by scanning electron microscopy. Energy dispersive X-ray spectroscopy and X-ray diffraction indicate that the nanobelts have the composition and the structure of black phosphorus, transmission electron microscopy reveals a typical layered structure stacked along the b-axis, and scanning transmission electron microscopy with energy dispersive X-ray spectroscopy analysis demonstrates the doping of bismuth into the black phosphorus structure. The nanobelt can be directly measured in scanning tunneling microscopy in ambient conditions.
RESUMEN
Controlling phase transition in functional materials at nanoscale is not only of broad scientific interest but also important for practical applications in the fields of renewable energy, information storage, transducer, sensor, and so forth. As a model functional material, vanadium dioxide (VO2) has its metal-insulator transition (MIT) usually at a sharp temperature around 68 °C. Here, we report a focused electron beam can directly lower down the transition temperature of a nanoarea to room temperature without prepatterning the VO2. This novel process is called radiolysis-assisted MIT (R-MIT). The electron beam irradiation fabricates a unique gradual MIT zone to several times of the beam size in which the temperature-dependent phase transition is achieved in an extended temperature range. The gradual transformation zone offers to precisely control the ratio of metal/insulator phases. This direct electron writing technique can open up an opportunity to precisely engineer nanodomains of diversified electronic properties in functional material-based devices.
RESUMEN
A protocol to quantify the distribution of surface atoms of concave nanocatalysts according to their coordination number is proposed. The 3D surface of an Au@Pd concave nanocube is reconstructed and segmented. The crystallographic coordinates and low-coordinate surface atom densities of the concave facets are determined. The result shows that 32% of the surface atoms are low-coordinated, which may contribute to the high activity.
RESUMEN
As-produced single-walled carbon nanotubes (SWCNTs) tend to aggregate in bundles due to π-π interactions. Several approaches are nowadays available to debundle, at least partially, the nanotubes through surface modification by both covalent and noncovalent approaches. Herein, we explore different strategies to afford an efficient covalent functionalization of SWCNTs with cobaltabisdicarbollide anions. Aberration-corrected HRTEM analysis reveals the presence of metallacarboranes along the walls of the SWCNTs. This new family of materials presents an outstanding water dispersibility that facilitates its processability for potential applications.
RESUMEN
The photothermoelectric effect in topological insulator Bi2Se3 nanoribbons is studied. The topological surface states are excited to be spin-polarized by circularly polarized light. Because the direction of the electron spin is locked to its momentum for the spin-helical surface states, the photothermoelectric effect is significantly enhanced as the oriented motions of the polarized spins are accelerated by the temperature gradient. The results are explained based on the microscopic mechanisms of a photon induced spin transition from the surface Dirac cone to the bulk conduction band. The as-reported enhanced photothermoelectric effect is expected to have potential applications in a spin-polarized power source.
RESUMEN
Carbon nanotubes (CNTs) have been proposed as one of the most promising nanomaterials to be used in biomedicine for their applications in drug/gene delivery as well as biomedical imaging. The present study developed radio-labeled iron oxide decorated multi-walled CNTs (MWNT) as dual magnetic resonance (MR) and single photon emission computed tomography (SPECT) imaging agents. Hybrids containing different amounts of iron oxide were synthesized by in situ generation. Physicochemical characterisations revealed the presence of superparamagnetic iron oxide nanoparticles (SPION) granted the magnetic properties of the hybrids. Further comprehensive examinations including high resolution transmission electron microscopy (HRTEM), fast Fourier transform simulations (FFT), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) assured the conformation of prepared SPION as γ-Fe2O3. High r2 relaxivities were obtained in both phantom and in vivo MRI compared to the clinically approved SPION Endorem®. The hybrids were successfully radio-labeled with technetium-99m through a functionalized bisphosphonate and enabled SPECT/CT imaging and γ-scintigraphy to quantitatively analyze the biodistribution in mice. No abnormality was found by histological examination and the presence of SPION and MWNT were identified by Perls stain and Neutral Red stain, respectively. TEM images of liver and spleen tissues showed the co-localization of SPION and MWNT within the same intracellular vesicles, indicating the in vivo stability of the hybrids after intravenous injection. The results demonstrated the capability of the present SPION-MWNT hybrids as dual MRI and SPECT contrast agents for in vivo use.
RESUMEN
The recent report of room-temperature superconductivity at near-ambient pressure in nitrogen-doped lutetium hydride (Lu-H-N) by Dasenbrock-Gammon et al. [Nature 615, 244-250 (2023)] has attracted tremendous attention due to its anticipated great impact on technology. However, the results could not be independently reproduced by other groups worldwide in follow-up studies, which elicited intense controversy. Here, we develop a reliable experimental protocol to minimize the extensively concerned extrinsic influences on the sample by starting the reaction from pure lutetium loaded with an H2/N2 gas mixture in a diamond anvil cell under different pressures and temperatures and simultaneously monitoring the entire chemical reaction process using in situ four-probe resistance measurements. Therefore, we could repeatedly reproduce the near-room temperature upsurge of electrical resistance at a relatively early stage of the chemical reaction. However, the mechanism is suggested to be a metal-to-semiconductor/insulator transition associated with the structural modulation in the non-stoichiometric Lu-H-N, rather than superconductivity.
RESUMEN
Molybdenum and its alloys are known for their superior strength among body-centered cubic materials. However, their widespread application is hindered by a significant decrease in ductility at lower temperatures. In this study, we demonstrate the achievement of exceptional ductility in a Mo alloy containing rare-earth La2O3 nanoparticles through rotary-swaging, a rarity in Mo-based materials. Our analysis reveals that the large ductility originates from substantial variations in the electronic density of states, a characteristic intrinsic to rare-earth elements. This characteristic can accelerate the generation of oxygen vacancies, facilitating the amorphization of the oxide-matrix interface. This process promotes vacancy absorption and modification of dislocation configurations. Furthermore, by inducing irregular shapes in the La2O3 nanoparticles through rotary-swaging, incoming dislocations interact with them, creating multiple dislocation sources near the interface. These dislocation sources act as potent initiators at even reduced temperatures, fostering diverse dislocation types and intricate networks, ultimately enhancing dislocation plasticity.
RESUMEN
Electrocatalytic CO2 reduction (eCO2R) in acid holds promise in renewable electricity-powered CO2 utilization with high efficiency, but the hydrogen evolution reaction (HER) often prevails and results in a low eCO2R selectivity. Here, using cobalt phthalocyanine/Ketjen black (CoPc/KB) as the model catalysts, we systematically study the effect of active site density, operational current density, and hydrated cations on the acidic eCO2R selectivity and decipher it through the componential dynamics of electric double layer (EDL). The optimal CoPc-4/KB demonstrates a near-unity CO Faradaic efficiency from 50 to 400 mA cm-2 and superb operational stability (>120 h) at 100 mA cm-2. Aided by in situ Raman and infrared spectroscopies, we reveal that the proper cations establish an electrostatic shield for mitigating bulk H+ penetration and mediate the interfacial water structure for suppressing HER. This study should elicit further profound thinking on robust eCO2R system design from the perspective of multiphasic and dynamic EDL.
RESUMEN
In this work, we demonstrate the successful incorporation of pure fullerene from solution into two-dimensional layered aluminosilicate minerals. Pure fullerenes are insoluble in water and neutral in terms of charge, hence they cannot be introduced into the clay galleries by ion exchange or intercalation from water solution. To overcome this bottleneck, we organically modified the clay with quaternary amines by using well-established reactions in clay science in order to expand the interlayer space and render the galleries organophilic. During the reaction with the fullerene solution, the organic solvent could enter into the clay galleries, thus transferring along the fullerene molecules. Furthermore, we demonstrate that the surfactant molecules, can be selectively removed by either simple ion-exchange reaction (e.g., interaction with Al(NO3)3 solution to replace the surfactant molecules with Al(3+) ions) or thermal treatment (heating at 350 °C) to obtain novel fullerene-pillared clay structures exhibiting enhanced surface area. The synthesized hybrid materials were characterized in detail by a combination of experimental techniques including powder X-ray diffraction, transmission electron microscopy, X-ray photoemission, and UV/Vis spectroscopy as well as thermal analysis and nitrogen adsorption-desorption measurements. The reported fullerene-pillared clay structures constitute a new hybrid system with very promising potential for the use in areas such as gas storage and/or gas separation due to their high surface area.
RESUMEN
The Co-N4-C single-atom catalysts (SACs) have attracted great research interest in the energy storage and conversion fields owing to 100% atom utilization. However, enhancing the Co loading for higher electrocatalytic performance is still challenging. In this context, we propose an engineering strategy to fabricate the high Co atomic loading Co-N4-C SACs based on the zeolitic imidazolate framework-67 (ZIF-67)@yeast construction. The rich amino groups provide the possibility for Co2+ ion anchorage and ZIF-67@yeast construction via the biomineralization of yeast cells. The functional design induces the formation of Co-N4-C sites and regulates the porosity for exposure of such Co-N4-C sites. As a result, the Co-N4-C sites were anchored on spherical micrometer flower carbonaceous materials through our novel strategy. The as-obtained optimal sample exhibited a Co atomic loading of 12.18 wt % and a specific surface area of 403.26 m2 g-1. High Co atomic loading and large specific surface area delivered excellent electrocatalytic kinetics as well as a high discharge voltage of 1.08 V at 10 mA cm-2 for more than 100 h in Zn-air batteries. This work represents a promising strategy for fabricating high-loading SACs with high activity and good durability.
RESUMEN
Designing shape-controlled Pt-based core-shell nanocrystals is a prospective strategy to maximize the utilization of Pt while maintaining high activity for oxygen reduction reaction (ORR). However, the core-shell structures with ultrathin Pt shell exhibit limited electrochemical durability. Therefore, a thicker shell is proposed to successfully improve the durability of the core-shell structures by preventing the core from dissolution. Nevertheless, the deposition of Pt tends to switch to the Stranski-Krastanov (S-K) growth mode with the increase of the number of layer, resulting in the absence of a conformal morphology. Herein, we realize the deposition of three-to-five-layer epitaxial Pt-Co layers on Pd octahedral seeds by introducing tensile strain in the epitaxial layer to impede the S-K growth. The as-obtained Pd@Pt-Co octahedra with four layers exhibit enhanced mass activity (0.69 A/mgPt) and specific activity (1.00 mA/cm2) for ORR, which are 4.93 and 5 times that of the commercial Pt/C, respectively. Furthermore, it shows only 17% decay for specific activity after a 30,000-cycle durability test. This work is expected to enlighten the design and synthesis of related core-shell nanocrystals with facetted multicomponent shells, offering a promising strategy for designing cost-effective and efficient catalysts.