Profiling of headspace volatiles from Escherichia coli cultures using silicone-based sorptive media and thermal desorption GC-MS.

Headspace sorptive extraction technique using silicone based sorptive media coated stir bars is used for the first time here to extract, identify, and quantify heavy volatile organic compounds present in Escherichia coli culture headspace. Detection of infection presence is largely accomplished in laboratories through physical sampling and subsequent growth of cultures for biochemical testing. The use of volatile biomarkers released from pathogens as indicators for pathogenic presence can vastly reduce the time needed whilst improving the success rates for infection detection. To validate this, by using a contactless headspace sorptive extraction technique, the volatile compounds released from E. coli, grown in vitro, have been extracted and identified. Two different sorptive media for extracting these headspace volatiles were compared in this study and the identified volatiles were quantified. The large phase volume and wider retention of this sorptive technique compared to traditional sampling approach enabled preconcentration and collection of wider range of volatiles towards developing an extensive database of such heavy volatiles associated with E. coli. This supplements the existing data of potential bacterial markers and use of internal standards in these tests allows semi-quantitative estimation of these compounds towards the development and optimization of novel pathogen sensing devices.

TDP-43 dysregulation of polyadenylation site selection is a defining feature of RNA misprocessing in ALS/FTD and related disorders.

Nuclear clearance and cytoplasmic aggregation of the RNA-binding protein TDP-43 are observed in many neurodegenerative disorders, including amyotrophic lateral sclerosis (ALS) and fronto- temporal dementia (FTD). Although TDP-43 dysregulation of splicing has emerged as a key event in these diseases, TDP-43 can also regulate polyadenylation; yet, this has not been adequately studied. Here, we applied the dynamic analysis of polyadenylation from RNA-seq (DaPars) tool to ALS/FTD transcriptome datasets, and report extensive alternative polyadenylation (APA) upon TDP-43 alteration in ALS/FTD cell models and postmortem ALS/FTD neuronal nuclei. Importantly, many identified APA genes highlight pathways implicated in ALS/FTD pathogenesis. To determine the functional significance of APA elicited by TDP-43 nuclear depletion, we examined microtubule affinity regulating kinase 3 (MARK3). Nuclear loss of TDP-43 yielded increased expression of MARK3 transcripts with longer 3'UTRs, resulting in greater transcript stability and elevated MARK3 protein levels, which promotes increased neuronal tau S262 phosphorylation. Our findings define changes in polyadenylation site selection as a previously unrecognized feature of TDP-43-driven disease pathology in ALS/FTD and highlight a potentially novel mechanistic link between TDP-43 dysfunction and tau regulation.

Towards biodegradable conducting polymers by incorporating seaweed cellulose for decomposable wearable heaters.

Thermotherapy shows significant potential for pain relief and enhanced blood circulation in wildlife rehabilitation, particularly for injured animals. However, the widespread adoption of this technology is hindered by the lack of biodegradable, wearable heating pads and concerns surrounding electronic waste (E-waste) in natural habitats. This study addresses this challenge by investigating an environmentally-friendly composite comprising poly(3,4-ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS), seaweed cellulose, and glycerol. Notably, this composite exhibits remarkable biodegradability, losing half of its weight within one week and displaying noticeable edge degradation by the third week when placed in soil. Moreover, it demonstrates impressive heating performance, reaching a temperature of 51 °C at a low voltage of 1.5 V, highlighting its strong potential for thermotherapy applications. The combination of substantial biodegradability and efficient heating performance offers a promising solution for sustainable electronic applications in wildlife rehabilitation and forest monitoring, effectively addressing the environmental challenges associated with E-waste.

Improvement of the Airflow Energy Harvester Based on the New Diamagnetic Levitation Structure.

This paper presents an improved solution for the airflow energy harvester based on the push-pull diamagnetic levitation structure. A four-notch rotor is adopted to eliminate the offset of the floating rotor and substantially increase the energy conversion rate. The new rotor is a centrally symmetrical-shaped magnet, which ensures that it is not subjected to cyclically varying unbalanced radial forces, thus avoiding the rotor's offset. Considering the output voltage and power of several types of rotors, the four-notch rotor was found to be optimal. Furthermore, with the four-notch rotor, the overall average increase in axial magnetic spring stiffness is 9.666% and the average increase in maximum monostable levitation space is 1.67%, but the horizontal recovery force is reduced by 3.97%. The experimental results show that at an airflow rate of 3000 sccm, the peak voltage and rotation speed of the four-notch rotor are 2.709 V and 21,367 rpm, respectively, which are 40.80% and 5.99% higher compared to the three-notch rotor. The experimental results were consistent with the analytical simulation. Based on the improvement, the energy conversion factor of the airflow energy harvester increased to 0.127 mV/rpm, the output power increased to 138.47 mW and the energy conversion rate increased to 58.14%, while the trend of the levitation characteristics also matched the simulation results. In summary, the solution proposed in this paper significantly improves the performance of the airflow energy harvester.

Alignment, body mass and their interaction on dynamic knee joint load in patients with knee osteoarthritis.

OBJECTIVE: To examine the interaction and relative contributions of frontal plane alignment and body mass on dynamic knee joint loading in patients with knee osteoarthritis (OA). METHODS: We completed three-dimensional gait analyses and hip-to-ankle standing anteroposterior radiographs on 487 patients with knee OA referred to a tertiary care center specializing in orthopaedics. RESULTS: Using sequential (hierarchical) linear regression, the interaction term (mechanical axis anglexmass) contributed significantly (P<0.001) to a model (total adjusted R(2)=0.70) predicting the external knee adduction moment, that included mechanical axis angle (R(2)=0.37) and mass (R(2)=0.06) while controlling for age, sex, height, Kellgren and Lawrence grade, pain score during walking, gait speed, toe out angle and trunk lean (R(2)=0.25). When the sample was split into tertiles for mass, mechanical axis angle accounted for 32-54% of explained variance in knee adduction moment. In the tertile with greatest mass, results suggest a 3.2 N m increase in knee load for every 1 degrees increase in varus alignment. When split into tertiles for mechanical axis angle, mass accounted for 6-10% of explained variance in the knee adduction moment. In the tertile with the most varus alignment, results suggest a 0.4 N m increase in knee load for every 1 kg increase in mass. CONCLUSION: Our findings describe the interaction between alignment and body mass on dynamic knee joint loading, with the association between alignment and load highest in patients with the highest mass. Our findings also emphasize the role of malalignment on knee load at all levels of mass, and have implications for better understanding risk factors and intervention strategies for knee OA.

Review of functional materials for potential use as wearable infection sensors in limb prostheses.

The fundamental goal of prosthesis is to achieve optimal levels of performance and enhance the quality of life of amputees. Socket type prostheses have been widely employed despite their known drawbacks. More recently, the advent of osseointegrated prostheses have demonstrated potential to be a better alternative to socket prosthesis eliminating most of the drawbacks of the latter. However, both socket and osseointegrated limb prostheses are prone to superficial infections during use. Infection prone skin lesions from frictional rubbing of the socket against the soft tissue are a known problem of socket type prosthesis. Osseointegration, on the other hand, results in an open wound at the implant-stump interface. The integration of infection sensors in prostheses to detect and prevent infections is proposed to enhance quality of life of amputees. Pathogenic volatiles having been identified to be a potent stimulus, this paper reviews the current techniques in the field of infection sensing, specifically focusing on identifying portable and flexible sensors with potential to be integrated into prosthesis designs. Various sensor architectures including but not limited to sensors fabricated from conducting polymers, carbon polymer composites, metal oxide semiconductors, metal organic frameworks, hydrogels and synthetic oligomers are reviewed. The challenges and their potential integration pathways that can enhance the possibilities of integrating these sensors into prosthesis designs are analysed.

Characterizing the Motor Points of Forearm Muscles for Dexterous Neuroprostheses.

BACKGROUND: Surface stimulation systems facilitate dexterous manipulation by achieving targeted and isolated activation of muscle groups through motor-point-based stimulation. Existing catalogs on motor points lack generalization and reproducibility, as they are mostly based on anatomical charts and were obtained from heterogeneous studies. OBJECTIVE: By systematically identifying and characterizing the motor points, the aim of this study is to address these limitations and improve the utilization of motor point catalogs toward the design and control for surface stimulation systems, which are targeted to restore complete hand function. METHODS: Sites that allowed motor-point-based stimulation were identified among nine healthy participants. Using bipolar stimulation, a tracing electrode was used to locate these sites along the forearm surface, and the muscle response to motor-point-based stimulation was also graded using isokinetic dynamometry. Ultimately, using machine-learning-based clustering algorithms, the motor point locations were grouped into clusters, and their centroids and confidence regions were derived. RESULTS: Such experimentally derived clusters had physiological correlations, and further cross validation was also in agreement with two test subjects. CONCLUSION: By clustering motor point locations, the potential for deriving a generalized catalog has been demonstrated. With current literature lacking such data, the novelty of this study lies in the representation of baseline information on location, shape, and the recruitment of stimulation zones for various muscle groups using bipolar stimulation. SIGNIFICANCE: This information can improve the design of electrode arrays and existing stimulation mapping algorithms, and aid clinicians toward electrode placement for patient-specific treatments.

Enabling Free-Standing 3D Hydrogel Microstructures with Microreactive Inkjet Printing.

Reactive inkjet printing holds great prospect as a multimaterial fabrication process because of its unique advantages involving customization, miniaturization, and precise control of droplets for patterning. For inkjet printing of hydrogel structures, a hydrogel precursor (or cross-linker) is printed onto a cross-linker (or precursor) bath or a substrate. However, the progress of patterning and design of intricate hydrogel structures using the inkjet printing technique is limited by the erratic interplay between gelation and motion control. Accordingly, microreactive inkjet printing (MRIJP) was applied to demonstrate a spontaneous 3D printing of hydrogel microstructures by using alginate as the model system. In addition, a printable window within the capillary number-Weber number for the MRIJP technique demonstrated the importance of velocity to realization of in-air binary droplet collision. Finally, systematic analysis shows that the structure and diffusion coefficient of hydrogels are important factors that affect the shape of printed hydrogels over time. Based on such a fundamental understanding of MRIJP of hydrogels, the fabrication process and the structure of hydrogels can be controlled and adapt for 2D/3D microstructure printing of any low-viscosity (<40 cP) reactive inks, with a representative tissue-mimicking structure of a ∼200 µm diameter hollow tube presented in this work.

Direct Patterning of Highly Conductive PEDOT:PSS/Ionic Liquid Hydrogel via Microreactive Inkjet Printing.

The gelation of poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) has gained popularity for its potential applications in three dimensions, while possessing tissue-like mechanical properties, high conductivity, and biocompatibility. However, the fabrication of arbitrary structures, especially via inkjet printing, is challenging because of the inherent gel formation. Here, microreactive inkjet printing (MRIJP) is utilized to pattern various 2D and 3D structures of PEDOT:PSS/IL hydrogel by in-air coalescence of PEDOT:PSS and ionic liquid (IL). By controlling the in-air position and Marangoni-driven encapsulation, single droplets of the PEDOT:PSS/IL hydrogel as small as a diameter of ≈260 µm are fabricated within ≈600 µs. Notably, this MRIJP-based PEDOT:PSS/IL has potential for freeform patterning while maintaining identical performance to those fabricated by the conventional spin-coating method. Through controlled deposition achieved via MRIJP, PEDOT:PSS/IL can be transformed into different 3D structures without the need for molding, potentially leading to substantial progress in next-generation bioelectronics devices.

Spontaneous and nitrosourea-induced primary tumors of the central nervous system in Fischer 344 rats exposed to frequency-modulated microwave fields.

In a 2-year bioassay, we exposed Fischer 344 rats to a frequency-modulated (FM) signal (836.55 MHz +/- 12.5 KHz deviation) simulating radiofrequency exposures in the head of users of hand-held mobile phones. We tested for effects on spontaneous tumorigenicity of central nervous system (CNS) tumors in the offspring of pregnant rats and also for modified incidence of primary CNS tumors in rats treated with a single dose of the neurocarcinogen ethylnitrosourea (ENU) in utero. ENU dosage (4 mg/kg) was selected to give an expected brain tumor incidence of 10-15% over the mean life span of 26 months. Pregnant dams (n = 102) were randomly assigned to six groups. Their offspring were treated as cohorts in each of the six groups (n = 90 per group; total, n = 540): Sham ENU/Sham Field, Sham ENU/Field Exposed, ENU/Sham Field, ENU/Field Exposed, ENU/Cage Control, and Sham ENU/Cage Control. Intermittent field exposures began on gestation day 19 and continued until weaning at 21 days, resuming thereafter at 31 days and continuing until experiment termination at 731-734 days. Energy absorption rates (SARs) in the rats' brains were similar to localized peak brain exposures of a phone user (female, 236 g, 1.0 W/kg; male, 450 g, 1.2 W/kg). Of the original 540 rats, 168 died before the termination of the experiment. In these rats, ENU significantly reduced survival from a mean of 708 days in three groups without ENU treatment to 645 days in three groups treated with ENU (P < 0.0005). There were no effects on survival attributable to FM field exposure in either ENU-treated or in sham-treated groups. Spontaneous CNS tumor incidence in control groups was 1.1-4.4% but sharply higher in rats receiving ENU (14.4-22.2%; P < 0.0001). No FM field-mediated changes were observed in number, incidence, or histological type of either spontaneous or ENU-induced brain tumors, nor were gender differences detected in tumor numbers. These negative findings with FM fields contrast with our study using standard digital phone fields pulsed on and off at 50/se, where a trend was noted toward reduced incidence of both spontaneous and ENU-induced CNS tumors (W. R. Adey et al., Radiat. Res., 152: 293-302, 1999). Although consistent but not attaining significance in the experiment overall (spontaneous CNS tumors, P < 0.08 one-tailed; P < 0.16 two-tailed; ENU-induced CNS tumors, P < 0.08 one-tailed, P < 0.16 two-tailed), the trend was significant (P < 0.015 one-tailed, P < 0.03, two-tailed) in rats that received ENU and died prior to experiment termination, with a primary brain tumor as the cause of death. We discuss differences in the signaling structure of digital and FM fields. Certain bioeffects induced by either amplitude-modulated or pulsed radiofrequency fields at athermal levels have not been seen with fields of similar average power but unvarying in intensity (continuous wave or frequency-modulated fields).

The time-course of energy balance in an isometric tetanus.

Unpoisoned sartorius muscles of Rana temporaria were stimulated tetanically in isometric contractions lasting up to 20 s at 0 degrees C. The observed enthalpy (heat + work) production and the chemical changes in these contractions were measured, and a comparison was made between the observed enthalpy and the enthalpy that could be explained by the chemical changes. Like earlier workers, we found that the only net known reaction of energetic significance that occurred was dephosphorylation of n-phosphoryl creatine (PC), and we found a significant evolution of unexplained enthalpy (UE), a portion of the observed enthalpy which could not be explained by the extent of PC dephosphorylation. We measured the total quantity and the rate of production of the UE, and we found that its rate of evolution, which was most rapid during the first 750 ms of contraction, fell progressively to zero by the 8th s of contraction: i.e., after 8 s of contraction, all the observed enthalpy is adequately explained by PC dephosphorylation. The time-course of evolution of the UE was slower than that of the labile enthalpy (a component of the enthalpy evolved in isometric contraction whose rate of production declines exponentially at approximately 1 s-1). We conclude that, although the magnitudes of these enthalpy quantities may be similar, they are not derived from the same chemical reaction in muscle.

Bio-inspired flow sensor from printed PEDOT:PSS micro-hairs.

This paper reports on the creation of a low-cost, disposable sensor for low flow velocities, constructed from extruded micro-sized 'hair' of conducting polymer PEDOT. These microstructures are inspired by hair strands found in many arthropods and chordates, which play a prime role in sensing air flows. The paper describes the fabrication techniques and the initial prototype testing results toward employing this sensing mechanism in applications requiring sensing of low flow rates such as a flow sensor in neonatal resuscitators. The fabricated 1000 µm long, 6 µm diameter micro-hairs mimic the bending movement of tactile hair strands to sense the velocity of air flow. The prototype sensor developed is a four-level direct digital-output sensor and is capable of detecting flow velocities of up to 0.97 m s(-1).

Psoriasiform dermatosis in a rhesus monkey.

We describe a dermatosis in a rhesus monkey (Macaca mulatta) that has the characteristic features of the human skin disease, psoriasis vulgaris. The monkey was affected by chronic erythematous, scaling plaques that occurred on the scalp, face, dorsal back, the extensor aspects of the limbs and the palms and soles. Subungual hyperkeratosis was present. Skin biopsies of the affected skin showed a regular acanthosis with reduction of granular cell layer, parakeratosis and supra papillary thinning of the epidermis. Foci of inflammatory cells were seen in the upper epidermis. The dermal changes were tortuous capillary loops and benign inflammatory infiltrate, particularly in the papillary dermis, all of which are features of the human skin disease psoriasis vulgaris. The presence of a nutritional deficiency syndrome was excluded and there was no evidence of any systemic disease.

Spontaneous and nitrosourea-induced primary tumors of the central nervous system in Fischer 344 rats chronically exposed to 836 MHz modulated microwaves.

We have tested an 836.55 MHz field with North American Digital Cellular (NADC) modulation in a 2-year animal bioassay that included fetal exposure. In offspring of pregnant Fischer 344 rats, we tested both spontaneous tumorigenicity and the incidence of induced central nervous system (CNS) tumors after a single dose of the carcinogen ethylnitrosourea (ENU) in utero, followed by intermittent digital-phone field exposure for 24 months. Far-field exposures began on gestational day 19 and continued until weaning at age 21 days. Near-field exposures began at 35 days and continued for the next 22 months, 4 consecutive days weekly, 2 h/day. SAR levels simulated localized peak brain exposures of a cell phone user. Of the 236 original rats, 182 (77%) survived to the termination of the whole experiment and were sacrificed at age 709-712 days. The 54 rats (23%) that died during the study ("preterm rats") formed a separate group for some statistical analyses. There was no evidence of tumorigenic effects in the CNS from exposure to the TDMA field. However, some evidence of tumor-inhibiting effects of TDMA exposure was apparent. Overall, the TDMA field-exposed animals exhibited trends toward a reduced incidence of spontaneous CNS tumors (P < 0. 16, two-tailed) and ENU-induced CNS tumors (P < 0.16, two-tailed). In preterm rats, where primary neural tumors were determined to be the cause of death, fields decreased the incidence of ENU-induced tumors (P < 0.03, two-tailed). We discuss a possible approach to evaluating with greater certainty the possible inhibitory effects of TDMA-field exposure on tumorigenesis in the CNS.

Identification of genes regulated by prolonged acid exposure in Helicobacter pylori.

To investigate the influence of prolonged acid exposure on the gene expression, transcripts of Helicobacter pylori, grown under pH 5.5 and pH 7.4 for five successive passages, were analysed by differential display PCR. Eight genes were regulated by prolonged acid exposure. These genes included topA, tufB, ureB, flaA, atoE in the H. pylori genome and a cDNA fragment with 54% identity of the predicted amino acid sequence to a Bacillus cereus YkoW protein. The remaining two cDNA fragments had no significant homology to known sequences. Our data suggest that most of these genes might be required for the resistance of H. pylori to prolonged acid exposure.

Psoriasiform dermatosis in a rhesus monkey. Epidermal labeling indexes, polyamines, and histopathologic findings.

We have previously described the clinical and dermatopathologic features of a psoriasiform dermatosis in a rhesus monkey (Macaca mulatta). This animal has been studied further in attempts to characterize its skin disease. Epidermal cell DNA synthesis was measured following the intradermal injection of tritiated thymidine. Epidermal cell labeling indexes in the involved and uninvolved skin of the affected monkey and in the skin of a normal monkey were compared. The labeling indexes in the involved skin were significantly increased as compared with uninvolved skin; they were also significantly higher than in normal skin. Epidermal polyamine assays showed increased epidermal putrescine in involved skin together with increased spermidine and an increased spermidine-spermine ratio compared with uninvolved and normal skin sites.

Periodontal repair in dogs: supraalveolar defect models for evaluation of safety and efficacy of periodontal reconstructive therapy.

It is increasingly evident that controlled preclinical models with reproducible defect characteristics and biologic reaction are critical for evaluation of safety and efficacy of periodontal reconstructive protocols. Our investigations have characterized a supraalveolar periodontal defect in the mandibular premolar region in the beagle dog. This surgically-created critical size defect heals with almost complete connective tissue attachment following immediate reconstructive surgery. When the defect is exposed to periodontitis-simulating conditions prior to surgery the new connective tissue attachment is reduced. Bone and cementum regeneration is limited for both defect variations. Critical aspects relative to animal selection and management, surgical protocol, histologic and statistical analysis are discussed. This preclinical model has proven effective for evaluation of safety and efficacy of devices and biologics used adjunctive to periodontal reconstructive therapy.

Orthodontic force application to titanium endosseous implants.

Endosseous implants in dogs are used successfully to apply orthodontic and orthopedic forces. Not all experimental implants remained firm enough through the initial healing period to be used for anchorage.