RESUMEN
Sub-10 nm ferroelectric and multiferroic materials are attracting increased scientific and technological interest, owing to their exciting physical phenomena and prospects in miniaturized electronic devices, neuromorphic computing, and ultra-compact data storage. The Bi6Ti2.9Fe1.5Mn0.6O18 (B6TFMO) Aurivillius system is a rare example of a multiferroic that operates at room temperature. Since the formation of magnetic impurity phases can complicate attempts to measure ferromagnetic signal intrinsic to the B6TFMO multiferroic phase and thus limits its use, herein we minimize this by utilizing relatively large (49%) bismuth excess to counteract its volatility during sub-10 nm growth. X-ray diffraction, electron microscopy, and atomic force microscopy show sample crystallinity and purity are substantially improved on increasing bismuth excess from 5 to 49%, with the volume fraction of surface impurities decreasing from 2.953.97 vol% down to 0.020.31 vol%. Piezoresponse force microscopy reveals 8 nm B6TFMO films are ferroelectric, with an isotropic random distribution of stable in-plane domains and weaker out-of-plane piezoresponse. By reducing the volume fraction of magnetic impurities, this work demonstrates the recent progress in the optimization of ultra-thin B6TFMO for future multiferroic technologies. We show how the orientation of the ferroelectric polarization can be switched in 8 nm B6TFMO and arrays can be "written" and "read" to express states permitting anti-parallel information storage.
RESUMEN
Aurivillius structured Bi6Ti3Fe1.5Mn0.5O18 (B6TFMO) has emerged as a rare room temperature multiferroic, exhibiting reversible magnetoelectric switching of ferroelectric domains under cycled magnetic fields. This layered oxide presents exceptional avenues for advancing data storage technologies owing to its distinctive ferroelectric and ferrimagnetic characteristics. Despite its immense potential, a comprehensive understanding of the underlying mechanisms driving multiferroic behavior remains elusive. Herein, we employ atomic resolution electron microscopy to elucidate the interplay of octahedral tilting and atomic-level structural distortions within B6TFMO, associating these phenomena with functional properties. Fundamental electronic features at varying bonding environments within this complex system are scrutinized using electron energy loss spectroscopy (EELS), revealing that the electronic nature of the Ti4+ cations within perovskite BO6 octahedra is influenced by position within the Aurivillius structure. Layer-by-layer EELS analysis shows an ascending crystal field splitting (Δ) trend from outer to center perovskite layers, with an average increase in Δ of 0.13 ± 0.06 eV. Density functional theory calculations, supported by atomic resolution polarization vector mapping of B-site cations, underscore the correlation between the evolving nature of Ti4+ cations, the extent of tetragonal distortion and ferroelectric behavior. Integrated differential phase contrast imaging unveils the position of light oxygen atoms in B6TFMO for the first time, exposing an escalating degree of octahedral tilting toward the center layers, which competes with the magnitude of BO6 tetragonal distortion. The observed octahedral tilting, influenced by B-site cation arrangement, is deemed crucial for juxtaposing magnetic cations and establishing long-range ferrimagnetic order in multiferroic B6TFMO.
RESUMEN
We report the first observation of piezoelectricity and ferroelectricity in individual Sb(2)S(3) nanowires embedded in anodic alumina templates. Switching spectroscopy-piezoresponse force microscopy (SS-PFM) measurements demonstrate that individual, c-axis-oriented Sb(2)S(3) nanowires exhibit ferroelectric as well as piezoelectric switching behavior. Sb(2)S(3) nanowires with nominal diameters of 200 and 100 nm showed d(33(eff)) values around 2 pm V(-1), while the piezo coefficient obtained for 50 nm diameter nanowires was relatively low at around 0.8 pm V(-1). A spontaneous polarization (P(s)) of approximately 1.8 µC cm(-2) was observed in the 200 and 100 nm Sb(2)S(3) nanowires, which is a 100% enhancement when compared to bulk Sb(2)S(3) and is probably due to the defect-free, single-crystalline nature of the nanowires synthesized. The 180° ferroelectric monodomains observed in Sb(2)S(3) nanowires were due to uniform polarization alignment along the polar c-axis.
Asunto(s)
Antimonio/química , Nanocables/química , Sulfuros/química , Óxido de Aluminio/química , Electricidad , Microscopía de Fuerza Atómica , Tamaño de la PartículaRESUMEN
Multiferroic topologies are an emerging solution for future low-power magnetic nanoelectronics due to their combined tuneable functionality and mobility. Here, we show that in addition to being magnetoelectric multiferroic at room temperature, thin-film Aurivillius phase Bi6TixFeyMnzO18 is an ideal material platform for both domain wall and vortex topology-based nanoelectronic devices. Utilizing atomic-resolution electron microscopy, we reveal the presence and structure of 180°-type charged head-to-head and tail-to-tail domain walls passing throughout the thin film. Theoretical calculations confirm the subunit cell cation site preference and charged domain wall energetics for Bi6TixFeyMnzO18. Finally, we show that polar vortex-type topologies also form at out-of-phase boundaries of stacking faults when internal strain and electrostatic energy gradients are altered. This study could pave the way for controlled polar vortex topology formation via strain engineering in other multiferroic thin films. Moreover, these results confirm that the subunit cell topological features play an important role in controlling the charge and spin state of Aurivillius phase films and other multiferroic heterostructures.
RESUMEN
A series of Aurivillius phase materials, Bi5Ti 3 - 2x Fe 1 + x NbxO15 ( [Formula: see text], 0.1, 0.2, 0.3, and 0.4), was fabricated by chemical solution deposition. The effects of aliovalent substitution for the successful inclusion of Fe 3+ and Nb 5+ by replacing Ti 4+ were explored as a potential mechanism for increasing magnetic ion content within the material. The structural, optical, piezoelectric, and magnetic properties of the materials were investigated. It was found that a limit of x = 0.1 was achieved before the appearance of secondary phases as determined by the X-ray diffraction. Absorption in the visible region increased with increasing values of x corresponding to the transition from the valence band to the conduction band of the Fe- [Formula: see text] energy level. Piezoresponse force microscopy measurements demonstrated that the lateral piezoelectric response increased with increasing values of x . Magnetic measurements of Bi5Ti2.8Fe1.1Nb0.1O15 exhibited a weak ferromagnetic response at 2, 150, and 300 K of 2.2, 1.6, and 1.5 emu/cm3 with Hc of â¼ 40 , 36, and 34 Oe, respectively. The remanent magnetization MR of this sample was found to be higher than the range of reported values for the Bi5Ti3Fe1O15 parent phase. Elemental analysis of this sample by energy-dispersive X-ray analysis did not provide any evidence for the presence of iron-rich secondary phases. However, it is noted that a series of measurements at varying sample volumes and instrument resolutions is still required in order to put a defined confidence level on the Bi5Ti2.8Fe1.1Nb0.1O15 material being a single-phase multiferroic.
RESUMEN
The five-layer Aurivillius phase Bi6TixFeyMnzO18 system is a rare example of a single-phase room temperature multiferroic material. To optimise its properties and exploit it for future memory storage applications, it is necessary to understand the origin of the room temperature magnetisation. In this work we use high resolution scanning transmission electron microscopy, EDX and EELS to discover how closely-packed Ti/Mn/Fe cations of similar atomic number are arranged, both within the perfect structure and within defect regions. Direct evidence for partitioning of the magnetic cations (Mn and Fe) to the central three of the five perovskite (PK) layers is presented, which reveals a marked preference for Mn to partition to the central layer. We infer this is most probably due to elastic strain energy considerations. The observed increase (>8%) in magnetic cation content at the central PK layers engenders up to a 90% increase in potential ferromagnetic spin alignments in the central layer and this could be significant in terms of creating pathways to the long-range room temperature magnetic order observed in this distinct and intriguing material system.
RESUMEN
We propose and evaluate the use of metallocene compounds as reducing agents for the chemical vapour deposition (and specifically atomic layer deposition, ALD) of the transition metal Cu from metalorganic precursors. Ten different transition metal cyclopentadienyl compounds are screened for their utility in the reduction of Cu from five different Cu precursors by evaluating model reaction energies with density functional theory (DFT) and solution phase chemistry.
RESUMEN
Assertions that a new material may offer particularly advantageous properties should always be subjected to careful critical evaluation, especially when those properties can be affected by the presence of inclusions at trace level. This is particularly important for claims relating to new multiferroic compounds, which can easily be confounded by unobserved second phase magnetic inclusions. We demonstrate an original methodology for the detection, localization and quantification of second phase inclusions in thin Aurivillius type films. Additionally, we develop a dedicated statistical model and demonstrate its application to the analysis of Bi(6)Ti(2.8)Fe(1.52)Mn(0.68)O18 (B6TFMO) thin films, that makes it possible to put a high, defined confidence level (e.g. 99.5%) to the statement of 'new single phase multiferroic materials'. While our methodology has been specifically developed for magnetic inclusions, it can easily be adapted to any other material system that can be affected by low level inclusions.
RESUMEN
The kinetics and mechanisms of the electron transfer reactions of [Fe(N-N)(3)](ClO(4))(3) [N-N = 2,2'-bipyridine, 1,10-phenanthroline] and [Fe(terpy)(2)](ClO(4))(3) [terpy = 2,2':6,2''-terpyridine] with a range of triphenyl verdazyl radicals have been investigated in acetonitrile at 25 degrees C and I = 0.05 mol dm(-3) (C(4)H(9))(4)NPF(6) using stopped-flow spectrophotometry. It was found that all three iron(III) complexes underwent extensive dissociation in acetonitrile and it was necessary to carry out the reactions in the presence of an excess of the relevant ligand. Under these conditions, reaction of the oxidant with the verdazyl radical resulted in an absorbance change that could be described by a single exponential. This was confirmed by global analysis of time-dependent spectra. A mechanism is proposed that accounts for the kinetic data. The rate constants for the electron transfer reaction are many orders of magnitudes less than would be predicted on the basis of the redox potentials and the self exchange rate constants of the reacting species.
RESUMEN
A range of oxo-centred, carboxylate bridged tri-iron complexes of general formula [Fe3(mu3-O)(O2CR)6L3]ClO4(R=CH2CN, CH2F, CH2Cl, CH2Br, p-NO2C6H4; L=pyridine, 3-methylpyridine, 4-methylpyridine, 3,5-dimethylpyridine, 3-cyanopyridine and 3-fluoropyridine) have been prepared and characterised. The choice of R and L was dictated by the requirement that the complexes undergo a one-electron reduction when reacted with verdazyl radicals. All except the complexes where L=pyridine and R=CH2CN, CH2Cl and p-NO2C6H4 have not been previously reported. The redox behaviour of these compounds has been investigated using cyclic voltammetry in acetonitrile in the absence and in the presence of free L. In general, all complexes exhibited reversible one-electron reductions. Electrochemical behaviour improved in the presence of an excess of L. The kinetics of the electron transfer reaction observed when acetonitrile solutions of the complexes were reacted with a range of verdazyl radicals were monitored using stopped-flow spectrophotometry. Under the experimental conditions, the reactions were quite rapid and were monitored under second-order conditions. Marcus linear free energy plots indicated that the outer-sphere electron transfer reactions were non-adiabatic in nature. Nevertheless, application of the self-exchange rate constants of the verdazyl radicals, k11, and the tri-iron complexes, k22, to the Marcus cross-relation resulted in calculated values of the cross-reaction rate constant, k12, that were within a factor of five of the experimentally determined value.
RESUMEN
The kinetics and mechanisms of the reactions of 3-(4-X)-phenyl-1,5-diphenyl-verdazyl radicals where X = Cl, H, CH3 and CH3O with [Co(N-N)3]3+, N-N = 2,2'-bipyridyl (bpy), 1,10-phenanthroline (phen) and 4,7-dimethyl-1,10-phenanthroline (4,7-Me2phen), have been investigated in acetonitrile at 25 degrees C and ionic strength 0.05 mol dm(-3)(nC4H9)4NPF6 using stopped flow spectrophotometry. In all cases, transfer of one electron from the radical takes place resulting in the production of a Co(II) species and a verdazylium cation. The electron transfer occurs by an outer-sphere mechanism and the reactions appear to be consistent with Marcus theory. The self-exchange rate constants for the verdazyl-verdazylium cation have been estimated and are of the order of 3.4(+/-1.9) x 10(7) dm(3) mol(-1) s(-1). This rate constant is consistent with the fact that the reactions of [Ru(bpy)3]3+ with verdazyl radicals are too rapid to be investigated by stopped flow spectrophotometry.