Crack Monitoring in Rotating Shaft Using Rotational Speed Sensor-Based Torsional Stiffness Estimation with Adaptive Extended Kalman Filters.

In this study, we present an alternative solution for detecting crack damages in rotating shafts under torque fluctuation by directly estimating the reduction in torsional shaft stiffness using the adaptive extended Kalman filter (AEKF) algorithm. A dynamic system model of a rotating shaft for designing AEKF was derived and implemented. An AEKF with a forgetting factor (λ) update was then designed to effectively estimate the time-varying parameter (torsional shaft stiffness) owing to cracks. Both simulation and experimental results demonstrated that the proposed estimation method could not only estimate the decrease in stiffness caused by a crack, but also quantitatively evaluate the fatigue crack growth by directly estimating the shaft torsional stiffness. Another advantage of the proposed approach is that it uses only two cost-effective rotational speed sensors and can be readily implemented in structural health monitoring systems of rotating machinery.

Objective predictors of delayed neurological sequelae in patients with altered mental status after carbon monoxide poisoning.

BACKGROUND AND PURPOSE: Following carbon monoxide (CO) poisoning, altered mental status is an important predictor of poor neurological prognosis, including delayed neurological sequelae (DNS). However, it is difficult to interview CO-poisoned patients accurately about exposure intervals and loss of consciousness (LOC). Thus, we investigated whether DNS can be predicted using objective factors such as laboratory results and brain imaging in patients suffering CO poisoning with altered mental status. METHODS: This was a prospective observational study involving all CO-poisoned patients who visited the university hospital emergency department (ED) in Bucheon, South Korea, between January 2019 and April 2020. All were registered in the CO registry. We excluded patients who were under 18 years of age, had no change in mental status, were lost to follow-up, had neurological deficits persisting at discharge from the ED, and/or were transferred from another hospital 24 hours after exposure. RESULTS: A total of 21 (25.3%) of 82 patients had DNS with a median onset of 21 (12 to 30) days. Creatinine kinase (CK) (odds ratio 1.0002, 95% confidence interval 2.734-105.231) and brain imaging (odds ratio 3.206, 95% confidence interval 1.008-10.199) were independent prognostic factors of DNS. CONCLUSION: A high level of serum CK and abnormal brain-imaging results were significant predictors of the occurrence of DNS in CO-poisoned patients with altered mental status. Critically, these are objective rather than subjective factors such as CO exposure interval.

Photo-Rheological Fluid-Based Colorimetric Ultraviolet Light Intensity Sensor.

This study presents an introduction to a new type of ultraviolet (UV) light intensity sensor using photo-rheological (PR) fluids whose properties, such as color, can be changed by UV light. When the PR fluids were irradiated by UV light, colorimetric transitions were observed. Effectively, this means that their color changed gradually from yellow to red. The degree of the color change depended on the UV light intensity and was characterized by the hue value of the images acquired with a compact image sensor. We demonstrated that UV light-responsive capabilities can be readily imparted to PR fluids, and that the colorimetric responses to different UV light intensities can be used to measure the UV light intensities.

A G-Fresnel Optical Device and Image Processing Based Miniature Spectrometer for Mechanoluminescence Sensor Applications.

This paper presents a miniature spectrometer fabricated based on a G-Fresnel optical device (i.e., diffraction grating and Fresnel lens) and operated by an image-processing algorithm, with an emphasis on the color space conversion in the range of visible light. The miniature spectrometer will be cost-effective and consists of a compact G-Fresnel optical device, which diffuses mixed visible light into the spectral image and a µ-processor platform embedded with an image-processing algorithm. The RGB color space commonly used in the image signal from a complementary metal-oxide-semiconductor (CMOS)-type image sensor is converted into the HSV color space, which is one of the most common methods to express color as a numeric value using hue (H), saturation (S), and value (V) via the color space conversion algorithm. Because the HSV color space has the advantages of expressing not only the three primary colors of light as the H but also its intensity as the V, it was possible to obtain both the wavelength and intensity information of the visible light from its spectral image. This miniature spectrometer yielded nonlinear sensitivity of hue in terms of wavelength. In this study, we introduce the potential of the G-Fresnel optical device, which is a miniature spectrometer, and demonstrated by measurement of the mechanoluminescence (ML) spectrum as a proof of concept.

Hysteresis Compensation of Piezoresistive Carbon Nanotube/Polydimethylsiloxane Composite-Based Force Sensors.

This paper provides a preliminary study on the hysteresis compensation of a piezoresistive silicon-based polymer composite, poly(dimethylsiloxane) dispersed with carbon nanotubes (CNTs), to demonstrate its feasibility as a conductive composite (i.e., a force-sensitive resistor) for force sensors. In this study, the potential use of the nanotube/polydimethylsiloxane (CNT/PDMS) as a force sensor is evaluated for the first time. The experimental results show that the electrical resistance of the CNT/PDMS composite changes in response to sinusoidal loading and static compressive load. The compensated output based on the Duhem hysteresis model shows a linear relationship. This simple hysteresis model can compensate for the nonlinear frequency-dependent hysteresis phenomenon when a dynamic sinusoidal force input is applied.

Hysteresis compensation of photoluminescence in ZnS:Cu for noncontact shaft torque sensing.

This paper presents a preliminary investigation of loading rate-dependent hysteresis of photoluminescence (PL) by phosphorescence quenching of copper-doped zinc sulfide (ZnS:Cu) microparticles in response to dynamic torsional loading. Precision sinusoidal torque waveforms in the frequency range of 0.5-3 Hz are used to identify the loading rate-dependent (i.e., frequency-dependent) nonlinear hysteresis phenomenon. The potential of the application of PL is demonstrated by successfully measuring the sinusoidal torque applied to a rotational shaft by evaluating the loading rate-dependent PL intensity signature using a photomultiplier tube. In addition, the potential of noncontact shaft torque sensing is demonstrated successfully by the simple compensation derived from ad hoc heuristic characterization.

Harnessing adaptive bistable stiffness of hair-cell-bundle structure for broadband vibration applications.

This study presents an initial study on the adaptive bistable stiffness of the hair cell bundle structure in a frog cochlea, and aims to harness its bistable nonlinearity that features a negative stiffness region for broadband vibration applications such as vibration-based energy harvesters. To this end, the mathematical model for describing the bistable stiffness is first formulated based on the modeling concept of piecewise type nonlinearities. The harmonic balance method was then employed to examine the nonlinear responses of bistable oscillator, mimicking hair cells bundle structure under the frequency sweeping condition, and their dynamic behaviors induced by bistable stiffness characteristics are projected on phase diagrams, and Poincare maps concerning the bifurcation. In particular, the bifurcation mapping at the super- and sub-harmonic regimes provides a better perspective to examine the nonlinear motions which occur in the biomimetic system. The use of bistable stiffness characteristics of hair cell bundle structure in frog cochlea thus offers physical insights to harness the adaptive bistable stiffness for metamaterial-like potential engineering structures such as vibration-based energy harvester, and isolator etc.

Eardrum-inspired soft viscoelastic diaphragms for CNN-based speech recognition with audio visualization images.

In this study, we present initial efforts for a new speech recognition approach aimed at producing different input images for convolutional neural network (CNN)-based speech recognition. We explored the potential of the tympanic membrane (eardrum)-inspired viscoelastic membrane-type diaphragms to deliver audio visualization images using a cross-recurrence plot (CRP). These images were formed by the two phase-shifted vibration responses of viscoelastic diaphragms. We expect this technique to replace the fast Fourier transform (FFT) spectrum currently used for speech recognition. Herein, we report that the new creation method of color images enabled by combining two phase-shifted vibration responses of viscoelastic diaphragms with CRP shows a lower computation burden and a promising potential alternative way to STFT (conventional spectrogram) when the image resolution (pixel size) is below critical resolution.

Tunable Young's Moduli of Soft Composites Fabricated from Magnetorheological Materials Containing Microsized Iron Particles.

This study experimentally investigates the field-dependent Young's moduli of soft composites, which are fabricated from two different magnetic-responsive materials; magnetorheological elastomer (MRE) and magnetorheological fluid (MRF). Four factors are selected as the main factors affecting Young's modulus of soft composites: the amount of MRF, the channel pattern, shore hardness and carbonyl iron particle (CIP) concentration of the MRE layer. Five specimens are manufactured to meet the investigation of four factors. Prior to testing, the scanning electron microscopy (SEM) image is taken to check the uniform dispersion of the carbonyl iron particle (CIP) concentration of the MRE layer, and a magnetic circuit is constructed to generate the effective magnetic field to the specimen fixed at the universal tensile test machine. The force-displacement curve is directly measured from the machine and converted to the stress-strain relationship. Thereafter, the Young's modulus is determined from this curve by performing linear regression analysis with respect to the considered factors. The tunability of the Young's moduli of the specimens is calculated based on the experimental results in terms of two performance indicators: the relative percentage difference of Young's modulus according to the magnetic field, and the normalized index independent of the zero-field modulus. In the case of the relative percentage difference, the specimens without MRF are the smallest, and the ones with the highest CIP concentration are the largest. As a result of comparing the normalized index of each factor, the change in shore hardness and channel pattern have little effect on the tunability of Young's moduli, and the amount of MRF injected and CIP concentration of MRE have a large effect. The results of this study are expected to provide basic guidelines for fabricating soft composites whose field-dependent Young's moduli can be tuned by several factors with different effects.

A Tactile Device Generating Repulsive Forces of Various Human Tissues Fabricated from Magnetic-Responsive Fluid in Porous Polyurethane.

In this study, a controllable tactile device capable of realizing repulsive forces from soft human tissues was proposed, and its effectiveness was verified through experimental tests. The device was fabricated using both porous polyurethane foam (PPF) and smart magnetorheological fluid (MRF). As a first step, the microstructural behavior of MRF particle chains that depended on the magnetic field was examined via scanning electron microscopy (SEM). The test samples were then fabricated after analyzing the magnetic field distribution, which was crucial for the formation of the particle chains under the squeeze mode operation. In the fabrication of the samples, MRF was immersed into the porous polyurethane foam and encapsulated by adhesive tape to avoid leakage. To verify the effectiveness of the proposed tactile device for appropriate stiffness of soft human tissues such as liver, the repulsive force and relaxation stress were measured and discussed as a function of the magnetic field intensity. In addition, the effectiveness and practical applicability of the proposed tactile device have been validated through the psychophysical test.

Microstructure Simulation and Constitutive Modelling of Magnetorheological Fluids Based on the Hexagonal Close-packed Structure.

This paper presents a new constitutive model of high particles concentrated magnetorheological fluids (MRFs) that is based on the hexagonal close-packed structure, which can reflect the micro-structures of the particles under the magnetic field. Firstly, the particle dynamic simulations for the forces sustained by carbonyl iron powder (CIP) particles of MRFs are performed in order to investigate the particles chain-forming process at different time nodes. Subsequently, according to the force analyses, a hexagonal close-packed structure, which differs from the existing single-chain structure and body-cantered cubic structure, is adopted to formulate a constitutive model of MRFs with high concentration of the magnetic-responsive particles. Several experiments are performed while considering crucial factors that influence on the chain-forming mechanism and, hence, change the field-dependent shear yield stress in order to validate the proposed model. These factors include the magnetic induction intensity, volume fraction and radius of CIP particles, and surfactant coating thickness. It is shown that the proposed modeling approach can predict the field-dependent shear yield stress much better than the single-chain model. In addition, it is identified that the shear yield stress is increased as the particle volume fraction increases and surfactant coating thickness decreases. It is believed that the proposed constitutive model can be effectively used to estimate the field-dependent shear yield stress of MRFs with a high concentration of iron particles.

Dual Optical Signal-based Intraocular Pressure-sensing Principle Using Pressure-sensitive Mechanoluminescent ZnS:Cu/PDMS Soft Composite.

This paper presents a novel principle for intraocular pressure (IOP)-sensing (monitoring) based on a pressure-sensitive soft composite in which a dual optical signal is produced in response to impulsive pressure input. For the initial assessment of the new IOP sensing principle, a human eye is modeled as the spherically shaped shell structure filled with the pressurized fluid, including cornea, sclera, lens and zonular fiber, and a fluid-structure interaction (FSI) analysis was performed to determine the correlation between the internal pressure and deformation (i.e., strain) rate of the spherical shell structure filled with fluid by formulating the finite element model. The FSI analysis results for human eye model are experimentally validated using a proof-of-conceptual experimental model consisting of a pressurized spherical shell structure filled with fluid and a simple air-puff actuation system. In this study, a mechanoluminescent ZnS:Cu- polydimethylsiloxane (PDMS)-based soft composite is fabricated and used to generate the dual optical signal because mechanically driven ZnS:Cu/PDMS soft composite can emit strong luminescence, suitable for soft sensor applications. Similar to the corneal behavior of the human eye, inward and outward deformations occur on the soft composite attached to the spherical shell structure in response to air puffing, resulting in a dual optical signal in the mechnoluminescence (ML) soft composite.

3D-Printed Soft Structure of Polyurethane and Magnetorheological Fluid: A Proof-of-Concept Investigation of its Stiffness Tunability.

In this study, a soft structure with its stiffness tunable by an external field is proposed. The proposed soft beam structure consists of a skin structure with channels filled with a magnetorheological fluid (MRF). Two specimens of the soft structure are fabricated by three-dimensional printing and fused deposition modeling. In the fabrication, a nozzle is used to obtain channels in the skin of the thermoplastic polyurethane, while another nozzle is used to fill MRF in the channels. The specimens are tested by using a universal tensile machine to evaluate the relationships between the load and deflection under two different conditions, without and with permanent magnets. It is empirically shown that the stiffness of the proposed soft structure can be altered by activating the magnetic field.

A Novel Frequency Selectivity Approach Based on Travelling Wave Propagation in Mechanoluminescence Basilar Membrane for Artificial Cochlea.

This study presents the initial assessment for a new approach to frequency selectivity aimed at mimicking the function of the basilar membrane within the human cochlea. The term cochlea tonotopy refers to the passive frequency selectivity and a transformation from the acoustic wave into a frequency signal assisted by the hair cells in the organ of Corti. While high-frequency sound waves vibrate near the base of the cochlea (near the oval windows), low-frequency waves vibrate near the apex (at the maximum distance from the base), which suggests the existence of continuous frequency selectivity. Over the past few decades, frequency selectivity using artificial membranes has been utilized in acoustic transducers by mimicking cochlea tonotopy using cantilever-beam arrays with defined physical parameters such as length and thickness. Unlike the conventional cantilever-beam array type, the travelling wave propagation based-mechanoluminescence (ML) membrane made of ZnS:Cu- polydimethylsiloxane (ZnS:Cu-PDMS) composite that we describe here provides new frequency selectivity more similar to that demonstrated by the human membrane. Here, we explored the potential of the ML membrane to deliver new frequency selectivity by using a non-contact image sensor to measure visualized frequencies. We report that the ML basilar membrane can provide effective visualization of the distribution of strain rate associated with the position of maximal amplitude of the travelling wave.

Fabrication of Cellulose ZnO Hybrid Nanocomposite and Its Strain Sensing Behavior.

This paper reports a hybrid nanocomposite of well-aligned zinc oxide (ZnO) nanorods on cellulose and its strain sensing behavior. ZnO nanorods are chemically grown on a cellulose film by using a hydrothermal process, termed as cellulose ZnO hybrid nanocomposite (CEZOHN). CEZOHN is made by seeding and growing of ZnO on the cellulose and its structural properties are investigated. The well-aligned ZnO nanorods in conjunction with the cellulose film shows enhancement of its electromechanical property. Strain sensing behaviors of the nanocomposite are tested in bending and longitudinal stretching modes and the CEZOHN strain sensors exhibit linear responses.