A Comparative Analysis of In Vitro Toxicity of Synthetic Zeolites on IMR-90 Human Lung Fibroblast Cells.

Broad industrial application of zeolites increases the opportunity of inhalation. However, the potential impact of different types and compositions of zeolite on cytotoxicity is still unknown. Four types of synthetic zeolites have been prepared for assessing the effect on lung fibroblast: two zeolite L (LTL-R and LTL-D), ZSM-5 (MFI-S), and faujasite (FAU-S). The cytotoxicity of zeolites on human lung fibroblast (IMR-90) was assessed using WST1 cell proliferation assay, mitochondrial function, membrane leakage of lactate dehydrogenase, reduced glutathione levels, and mitochondrial membrane potential were assessed under control. Intracellular changes were examined using transmission electron microscopy (TEM). Toxicity-related gene expressions were evaluated by PCR array. The result showed significantly higher toxicity in IMR-90 cells with FAU-S than LTL-R, LTL-D and MFI-S exposure. TEM showed FAU-S, spheroidal zeolite with a low Si/Al ratio, was readily internalized forming numerous phagosomes in IMR-90 cells, while the largest and disc-shaped zeolites showed the lowest toxicity and were located in submembranous phagosomes in IMR-90 cells. Differential expression of TNF related genes was detected using PCR arrays and confirmed using qRT-PCR analysis of selected genes. Collectively, the exposure of different zeolites shows different toxicity on IMR-90 cells.

Functionalized Magnetic PLGA Nanospheres for Targeting and Bioimaging of Breast Cancer.

Superparamagnetic iron oxide nanoparticles (SPIONs) are actively used as highly sensitive imaging probes to provide contrast in MRI. In this study, we propose the use of SPIONs encapsulated with antibody-conjugated poly(lactic-co-glycolic acid) (PLGA) as a potent theragnostic agent. The SPIONs were synthesized by a chemical co-precipitation method of ferric and ferrous ions, and subsequently encapsulated with PLGA by using an emulsification-diffusion method. Herceptin was chemically conjugated to the SPION-encapsulating PLGA nanoparticles to target the human epidermal growth factor receptor 2 (Her2/neu) overexpressing breast cancers. FACS and MR molecular imaging revealed that the Her2/neu overexpressing cell line showed a stronger contrast enhancement than the Her2/neu non-expressing cell lines, and the signal intensity of in vivo MR imaging decreased as the concentration of Herceptin increased. This strategy of encapsulating SPIONs with PLGA will be highly useful in functionalizing magnetic nanoparticles and improving the diagnostic and therapeutic efficacy of a wide array of cancer treatments.

Thin Films of Highly Planar Semiconductor Polymers Exhibiting Band-like Transport at Room Temperature.

We report the observation of band-like transport from printed polymer thin films at room temperature. This was achieved from donor-acceptor type thiophene-thiazole copolymer that was carefully designed to enhance the planarity of the backbone and the resulting transfer integral between the macromolecules. Due to the strong molecular interaction, the printed polymer film exhibited extremely low trap density comparable to that of molecular single crystals. Moreover, the energy barrier height for charge transport could be readily reduced with the aid of electric field, which led formation of extended electron states for band-like charge transport at room temperature.

Electroless chemical grafting of nitrophenyl groups on n-doped hydrogenated amorphous silicon surfaces.

The direct spontaneous grafting of 4-nitrophenyl molecules onto n-doped hydrogenated amorphous silicon (a-Si:H) surfaces without external ultraviolet, thermal, or electrochemical energy was invegtigated. Clean n-doped a-Si:H thin films were dipped in a solution of 4-nitrobenzenediazonium salts (PNBD) in acetonitrile. After the modified surfaces were rinsed, they were analyzed qualitatively and quantitatively by X-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM). XPS and AFM results show that the reaction of an n-doped a-Si:H thin film with PNBD self-terminates without polymerization, after 5 h, and the surface number density of 4-nitrophenyl molecules is 4.2 x 10(15)/cm2. These results demonstrate that the spontaneous grafting of nitrophenyl layers onto n-doped a-Si:H thin films is an attractive pathway toward forming interfaces between a-Si:H and organic layers under ambient conditions.

Epitaxial relationships between calcium carbonate and inorganic substrates.

The polymorph-selective crystallization of calcium carbonate has been studied in terms of epitaxial relationship between the inorganic substrates and the aragonite/calcite polymorphs with implication in bioinspired mineralization. EpiCalc software was employed to assess the previously published experimental results on two different groups of inorganic substrates: aragonitic carbonate crystals (SrCO3, PbCO3, and BaCO3) and a hexagonal crystal family (α-Al2O3, α-SiO2, and LiNbO3). The maximum size of the overlayer (aragonite or calcite) was calculated for each substrate based on a threshold value of the dimensionless potential to estimate the relative nucleation preference of the polymorphs of calcium carbonate. The results were in good agreement with previous experimental observations, although stereochemical effects between the overlayer and substrate should be separately considered when existed. In assessing the polymorph-selective nucleation, the current method appeared to provide a better tool than the oversimplified mismatch parameters without invoking time-consuming molecular simulation.

Estimating the solubility of amorphous ibuprofen using nanoporous anodic aluminum oxide as a solidification template.

Amorphous phases of active pharmaceutical ingredients (APIs) generally possess greater solubility than the crystalline counterparts. This presents them as attractive candidates for enhancing the bioavailability of the sparingly soluble drugs, while the unstable nature of them makes it challenging to reliably evaluate their potential improvement in solubility and utilize them in drug formulations. We have investigated the anodic aluminum oxide (AAO) substrates with nanopores to establish a simple system to examine the solubility increase accompanied by the decrease of the API crystallinity, using ibuprofen (IBU) as a model compound. The fabricated AAO substrates had the average pore diameters: 25, 55, and 370 nm. The AAO substrates with nanopores allowed the solidification of IBU with lower crystallinity. Also, the release behavior directly from the AAO substrates made it possible to estimate the accompanying solubility increase. The amorphous IBU in the 25-nm pores possessed solubility about 6 times higher than the bulk crystalline phase. The present study demonstrated that the nanoporous AAO substrates could be utilized as a straightforward tool to investigate the solubility and stability of the amorphous phases of APIs.

Cooperative modulation of mineral growth by prismatic-associated Asprich Sequences and Mg(II).

Cooperative effects of magnesium ions and acidic polypeptides originating from a family of proteins known as Asprich (mollusk Atrina rigida) were studied. In our previous studies, these two acidic polypeptides were found to be effective in controlling the morphology of the calcium carbonate mineral, the main inorganic constituent of prismatic layer of the mollusk shell. Since these Asprich sequences are believed to contain a putative magnesium binding domain, the morphology-controlling effects were further investigated with the addition of magnesium ions. The mineral morphology was dramatically changed by the combined influence of each polypeptides and the magnesium ions, substantiating the recognized importance of magnesium in the formation of calcium carbonate-based biominerals.

Effects of humidity and surfaces on the melt crystallization of ibuprofen.

Melt crystallization of ibuprofen was studied to understand the effects of humidity and surfaces. The molecular self-assembly during the amorphous-to-crystal transformation was examined in terms of the nucleation and growth of the crystals. The crystallization was on Al, Au, and self-assembled monolayers with -CH(3), -OH, and -COOH functional groups. Effects of the humidity were studied at room temperature (18-20 °C) with relative humidity 33%, 75%, and 100%. Effects of the surfaces were observed at -20 °C (relative humidity 36%) to enable close monitoring with slower crystal growth. The nucleation time of ibuprofen was faster at high humidity conditions probably due to the local formation of the unfavorable ibuprofen melt/water interface. The crystal morphologies of ibuprofen were governed by the nature of the surfaces, and they could be associated with the growth kinetics by the Avrami equation. The current study demonstrated the effective control of the melt crystallization of ibuprofen through the melt/atmosphere and melt/surface interfaces.

Bis[(2,2-dimethyl-propano-yloxy)meth-yl] {[2-(6-amino-9H-purin-9-yl)eth-oxy]meth-yl}phospho-nate-succinic acid (2/1).

The title compound, C(20)H(32)N(5)O(8)P·0.5C(4)H(6)O(4), is composed of two 9-{2-[bis-(pivaloyloxymeth-oxy)phosphinylmeth-oxy]eth-yl}adenine, commonly known as adefovir dipivoxil (AD), mol-ecules linked to the carb-oxy-lic acid groups of succinic acid (SA). The asymmetric unit contains one mol-ecule of AD and half a mol-ecule of SA, which sits on an inversion center. Both adenine units in the two AD mol-ecules make AD-SA N-H⋯O and SA-AD O-H⋯N hydrogen bonds to SA. In addition, the inter-molecular AD-AD N-H⋯O-P hydrogen bond serves to stabilize the cocrystal. There is also a π-π stacking inter-action [inter-planar spacing 3.34 (19) Å] between adjacent inversion-related adenine groups.

Novel polymorphic form of adefovir dipivoxil derived from polymer-directed crystallization.

Crystallization is an essential step in pharmaceutical processing. The discovery of a non-classical crystallization pathway would be a promising strategy to engineer the properties of drug crystalline particles for specific delivery conditions. Herein, polymer-directed crystallization was successfully employed to modify the characteristics of a model drug, adefovir dipivoxil (AD). Polyacrylic acid (PAA), ethyl cellulose (EC), and hydroxypropyl cellulose were added as active polymers to control the crystallization pathway of AD. Changes in crystal habit were observed in all cases. A novel polymorph was found after the addition of PAA and EC, and was confirmed by XRD and DSC results. In FTIR investigations, the crystals derived from PAA-directed crystallization showed strong interactions between PAA and AD. The polymer content in polymer-directed crystallization-derived powders varied from 7 to 24 wt%, and the presence of polymers lead to sustained release of AD. These results make polymer-directed crystallization a simple and efficient technique to engineer the physical and chemical properties of drug crystals.

Eutectic Formation of Naproxen with Some Dicarboxylic Acids.

Eutectic formation with additives is one of the established methods to improve the dissolution behaviors of active pharmaceutic ingredients (APIs). The improvement is mainly due to the increase in the surface area for dissolution, which originates from the finely divided micro-domains generated through the phase separation of the miscible liquid components upon solidification. The present study is to identify eutectic-forming additives for naproxen (NPX), a class II API of the biopharmaceutical classification system. A particular aim was to develop a eutectic mixture with NPX at least over 20 wt%, a minimum to be practical for oral delivery. Screening based on the proximity of the solubility parameter values identified dicarboxylic acids (succinic acid, glutaric acid, and suberic acid) as desirable additives for NPX. Binary melting diagrams were constructed to confirm the eutectic compositions, and the eutectic mixture with suberic acid (NPX 55 wt%) was further investigated. The dissolution (at pH 5.0) of the melt crystallized eutectics was enhanced compared to the simple physical mixture of the same compositions and neat NPX, which was attributed to the microscopically observed lamellar structures. The current study should support the systematic investigations of API eutectic mixtures by selecting appropriate eutectic-forming additives.

Enhanced Dissolution of Naproxen by Combining Cocrystallization and Eutectic Formation.

Improving dissolution properties of active pharmaceutical ingredients (APIs) is a critical step in drug development with the increasing occurrence of sparingly soluble APIs. Cocrystal formation is one of the methods to alter the physicochemical properties of APIs, but its dissolution behavior in biorelevant media has been scrutinized only in recent years. We investigated the combined strategy of cocrystallization and eutectic formation in this regard and utilized the cocrystal model system of naproxen and three pyridinecarboxamide isomers. Binary melting diagrams were constructed to discover the eutectic compositions of the three cocrystals with excess amounts of pyridinecarboxamides. The melt-crystallized eutectics and cocrystals were compared in their dissolution behaviors with respect to neat naproxen. The eutectics enhanced the early dissolution rates of the cocrystals in both the absence and presence of biologically relevant bile salt and phospholipid components, whereas the cocrystal dissolution was expedited and delayed, respectively. The combined strategy in the present study will be advantageous in maximizing the utility of the pharmaceutical cocrystals.

Probing the molecular mechanisms of quartz-binding peptides.

Understanding the mechanisms of biomineralization and the realization of biology-inspired inorganic materials formation largely depends on our ability to manipulate peptide/solid interfacial interactions. Material interfaces and biointerfaces are critical sites for bioinorganic synthesis, surface diffusion, and molecular recognition. Recently adapted biocombinatorial techniques permit the isolation of peptides recognizing inorganic solids that are used as molecular building blocks, for example, as synthesizers, linkers, and assemblers. Despite their ubiquitous utility in nanotechnology, biotechnology, and medicine, the fundamental mechanisms of molecular recognition of engineered peptides binding to inorganic surfaces remain largely unknown. To explore propensity rules connecting sequence, structure, and function that play key roles in peptide/solid interactions, we combine two different approaches: a statistical analysis that searches for highly enriched motifs among de novo designed peptides, and, atomistic simulations of three experimentally validated peptides. The two strong and one weak quartz-binding peptides were chosen for the simulations at the quartz (100) surface under aqueous conditions. Solution-based peptide structures were analyzed by circular dichroism measurements. Small and hydrophobic residues, such as Pro, play a key role at the interface by making close contact with the solid and hindering formation of intrapeptide hydrogen bonds. The high binding affinity of a peptide may be driven by a combination of favorable enthalpic and entropic effects, that is, a strong binder may possess a large number of possible binding configurations, many of which having relatively high binding energies. The results signify the role of the local molecular environment among the critical residues that participate in solid binding. The work herein describes molecular conformations inherent in material-specific peptides and provides fundamental insight into the atomistic understanding of peptide/solid interfaces.

Stabilized Amorphous Calcium Carbonate as a Precursor of Microcoating on Calcite.

Highly controlled biomineralization of calcium carbonate is via non-classical mesocrystallization of amorphous precursors. In the present study, a simple in vitro assay was developed to mimic the biological process, which involved stabilized amorphous calcium carbonate and a single crystal substrate of calcite. The microcoating layer formed on the calcite substrate displayed mesocrystalline characteristics, and the layers near the substrate were strongly influenced by the epitaxy to the substrate. This behavior was preserved even when the morphology of the coating layer was modified with poly(acrylic acid), a model anionic macromolecule. Interestingly, the extent of the epitaxy increased substantially with poly(ethylene imine), which barely affected the crystal morphology. The in vitro assay in the present study will be useful in the investigations of the biomineralization and bioinspired crystallization of calcium carbonate in general.

Binary Mixtures of Some Active Pharmaceutical Ingredients with Fatty Alcohols-The Criteria of Successful Eutectic Formation and Dissolution Improvement.

Pharmaceutical eutectics are solid mixtures, where the crystals of active pharmaceutical ingredients (APIs) are finely divided in the phase-separated microstructures. The size reduction makes the eutectic formation a viable option to improve the dissolution rate of the poorly soluble APIs. In the present study, ibuprofen, naproxen, and sorafenib were investigated in terms of their phase behaviors with fatty alcohols, such as tetradecanol, octadecanol, and docosanol. Among the studied APIs, only ibuprofen was able to form eutectics with the fatty alcohols, and this was in agreement with the feasibility prediction based on the van 't Hoff equation and solubility parameters. In vitro release behavior was significantly improved for the ibuprofen/octadecanol eutectic mixture, although the practical insolubility of octadecanol in water was the opposite of the outstanding hydrophilicity of usual eutectic formers. The feasibility prediction and the choice of eutectic formers in the present study will be useful in advancing the utility of the pharmaceutical eutectics.

Preliminary Characterization of Glass/Alumina Composite Using Laser Powder Bed Fusion (L-PBF) Additive Manufacturing.

Powder bed fusion (PBF) additive manufacturing (AM) is currently used to produce high-efficiency, high-density, and high-performance products for a variety of applications. However, existing AM methods are applicable only to metal materials and not to high-melting-point ceramics. Here, we develop a composite material for PBF AM by adding Al2O3 to a glass material using laser melting. Al2O3 and a black pigment are added to a synthesized glass frit for improving the composite strength and increased laser-light absorption, respectively. Our sample analysis shows that the glass melts to form a composite when the mixture is laser-irradiated. To improve the sintering density, we heat-treat the sample at 750 °C to synthesize a high-density glass frit composite. As per our X-ray diffraction (XRD) analysis to confirm the reactivity of the glass frit and Al2O3, we find that no reactions occur between glass and crystalline Al2O3. Moreover, we obtain a high sample density of ≥95% of the theoretical density. We also evaluate the composite's mechanical properties as a function of the Al2O3 content. Our approach facilitates the manufacturing of ceramic 3D structures using glass materials through PBF AM and affords the benefits of reduced process cost, improved performance, newer functionalities, and increased value addition.

Proteomic analysis of a matrix stone: a case report.

Matrix stones are radiolucent bodies that present as soft muco-proteinaceous material within the renal collecting system. Following wide-angle X-ray diffraction (XRD) and scanning electron microscopy (SEM), we homogenized a surgically removed matrix stone, extracted and purified protein, and analyzed samples using tandem mass spectrometry for proteomic composition. Resulting spectra were searched using ProteinPilot 2.0, and identified proteins were reported with >95% confidence. Primary XRD mineral analysis was a biological apatite, and SEM revealed fibrous, net-like laminations containing bacterial, cellular, and crystalline material. Of the 33 unique proteins identified, 90% have not been previously reported within matrix stones and over 70% may be considered inflammatory or defensive in nature. Characterization of other matrix stone proteomes, in particular from non-infectious populations, may yield insights into the pathogenesis of this rare stone as well as the mineralogical process that occurs within crystalline calculi.

Conditioned medium from asbestos-exposed fibroblasts affects proliferation and invasion of lung cancer cell lines.

The importance of the role of fibroblasts in cancer microenvironment is well-recognized. However, the relationship between fibroblasts and asbestos-induced lung cancer remains underexplored. To investigate the effect of the asbestos-related microenvironment on lung cancer progression, lung cancer cells (NCI-H358, Calu-3, and A549) were cultured in media derived from IMR-90 lung fibroblasts exposed to 50 mg/L asbestos (chrysotile, amosite, and crocidolite) for 24 h. The kinetics and migration of lung cancer cells in the presence of asbestos-exposed lung fibroblast media were monitored using a real-time cell analysis system. Proliferation and migration of A549 cells increased in the presence of media derived from asbestos-exposed lung fibroblasts than in the presence of media derived from normal lung fibroblasts. We observed no increase in proliferation and migration in lung cancer cells cultured in asbestos-exposed lung cancer cell medium. In contrast, increased proliferation and migration in lung cancer cells exposed to media from asbestos-exposed lung fibroblasts was observed for all types of asbestos. Media derived from lung fibroblasts exposed to other stressors, such as hydrogen peroxide and UV radiation didn't show as similar effect as asbestos exposure. An enzyme-linked immunosorbent assay (ELISA)-based cytokine array identified interleukin (IL)-6 and IL-8, which show pleiotropic regulatory effects on lung cancer cells, to be specifically produced in higher amounts by the three types of asbestos-exposed lung fibroblasts than normal lung fibroblasts. Thus, the present study demonstrated that interaction of lung fibroblasts with asbestos may support the growth and metastasis of lung cancer cells and that chrysotile exposure can lead to lung cancer similar to that caused by amphibole asbestos (amosite and crocidolite).

The Combined Effects of Sr(II) and Poly(Acrylic Acid) on the Morphology of Calcite.

Biomineralization of calcium carbonate has interesting characteristics of intricate morphology formation with controlled crystal polymorphs. In particular, modification of calcite morphology with diverse additives has been the focus of many biomimetic and bioinspired studies. The possible role of strontium ions in enhancing the morphology-modifying ability of macromolecules was investigated. In the present study, concentrations of strontium ions were comparable to that in seawater, and anionic poly(acrylic acid) and cationic poly(ethylene imine) were used as model macromolecules. When strontium ions were combined with anionic poly(acrylic acid), new types of calcite surfaces, most likely {hk0}, appeared to drastically change the morphology of the crystals, which was not observed with cationic poly(ethylene imine). This behavior of strontium ions was quite similar to that of magnesium ions, which is intriguing because both ions are available from seawater to be utilized during biomineralization.

Regulation of in vitro calcium phosphate mineralization by combinatorially selected hydroxyapatite-binding peptides.

We report selection and characterization of hydroxyapatite-binding heptapeptides from a peptide-phage library and demonstrate the effects of two peptides, with different binding affinities and structural properties, on the mineralization of calcium phosphate mineral. In vitro mineralization studies carried out using one strong- and one weak-binding peptide, HABP1 and HABP2, respectively, revealed that the former exhibited a drastic outcome on mineralization kinetics and particle morphology. Strong-binding peptide yielded significantly larger crystals, as observed by electron microscopy, in comparison to those formed in the presence of a weak-binding peptide or in the negative control. Molecular structural studies carried out by circular dichroism revealed that HABP1 and HABP2 differed in their secondary structure and conformational stability. The results indicate that sequence, structure, and molecular stability strongly influence the mineralization activity of these peptides. The implication of the research is that the combinatorially selected short-sequence peptides may be used in the restoration or regeneration of hard tissues through their control over of the formation of calcium phosphate biominerals.