Silver-assisted colloidal synthesis of stable, plasmon resonant gold patches on silica nanospheres.

Patchy particles possessing heterogeneous surface composition show great promise as self-organizing building blocks for new classes of hierarchical functional structures. A major hurdle is the scalable synthesis of stable patches on nanosized core particles with arbitrarily defined patch number and coverage. So far, few methods have been reported which could be expected to meet these challenges. Recently, we described the heterogeneous nucleation and growth of silver patches on silica nanospheres via a template free colloidal route. The patches produced, although tunable in size and number and showing interesting plasmon resonant properties, were rather unstable and degraded rapidly during attempts to process them further. In the present work, therefore, we set out to explore if related approaches can be employed to produce patchy particles involving gold, which is known to be more stable. The differences between typical patch precursors Ag(+) and [AuCl(x)(OH)(4-x)](-) and their respective interactions with amorphous silica make this a significant challenge. We show that preformed small silver patches in addition to the presence of a reducing agent are necessary for the formation of gold patches conformal to the silica nanosphere surface. Systematic study of the process parameters and their influence on the patchy particle morphology as well as in-depth analytical transmission electron microscopy investigation of the patch composition reveal that patches spread over the silica surface via a cycle of galvanic dissolution and redeposition of silver. The resulting gold patchy particles remain stable during subsequent storage or washing and display tunable plasmon resonances within the visible and near-IR spectrum.

Determination of the yield, mass and structure of silver patches on colloidal silica using multiwavelength analytical ultracentrifugation.

Anisotropic nanoparticles offer considerable promise for applications but also present significant challenges in terms of their characterization. Recent developments in the electroless deposition of silver patches directly onto colloidal silica particles have opened up a simple and scalable synthesis method for patchy particles with tunable optical properties. Due to the reliance on patch nucleation and growth, however, the resulting coatings are distributed in coverage and thickness and some core particles remain uncoated. To support process optimization, new methods are required to rapidly determine patch yield, thickness and coverage. Here we present a novel approach based on multiwavelength analytical ultracentrifugation (MWL-AUC) which permits simultaneous hydrodynamic and spectroscopic characterization. The patchy particle colloids are produced in a continuous flow mixing process that makes use of a KM-type micromixer. By varying the process flow rate or metal precursor concentration we show how the silver to silica mass ratio distribution derived from the AUC-measured sedimentation coefficient distribution can be influenced. Moreover, through reasoned assumptions we arrive at an estimation of the patch yield that is close to that determined by arduous analysis of scanning electron microscopy (SEM) images. Finally, combining MWL-AUC, electrodynamic simulations and SEM image analysis we establish a procedure to estimate the patch thickness and coverage.

Influence of the counterion on the synthesis of ZnO mesocrystals under solvothermal conditions.

Polymers and coordinating solvents have been shown to serve as templating agents to assist the precipitation of ZnO nanoparticles and address their morphology. In this work we show for the first time that a difference in the coordination strength between the polymer (poly-N-vinylpyrrolidone (PVP)) and the two Zn(II) precursor salts (nitrate and acetate) is able to promote or suppress the formation of mesocrystalline structures and even more importantly to tune their three-dimensional organization. On the basis of FTIR and (13)C NMR spectroscopic studies, we propose that not only the polymer (PVP) but also the solvent (DMF) play a key role as directing agents.

Facile route to morphologically tailored silver patches on colloidal particles.

Here we demonstrate, for the first time, the heterogeneous nucleation and growth of silver patches on submicrometer silica spheres. While patches can be grown directly onto native silica particles, it is shown that a higher patch yield can be obtained by first treating the silica with a mixture of an alkanolamine and silver nitrate. Variation of the pretreatment and subsequent coating reactions allowed the patch yield, number, size, thickness, and shape to be adjusted. The patchy particles were shown to possess plasmon modes extending from the visible into the near-IR region, making these structures highly interesting for both their asymmetric morphological and functional properties.

Bioinspired Photonic Pigments from Colloidal Self-Assembly.

The natural world is a colorful environment. Stunning displays of coloration have evolved throughout nature to optimize camouflage, warning, and communication. The resulting flamboyant visual effects and remarkable dynamic properties, often caused by an intricate structural design at the nano- and microscale, continue to inspire scientists to unravel the underlying physics and to recreate the observed effects. Here, the methodologies to create bioinspired photonic pigments using colloidal self-assembly approaches are considered. The physics governing the interaction of light with structural features and natural examples of structural coloration are briefly introduced. It is then outlined how the self-assembly of colloidal particles, acting as wavelength-scale building blocks, can be particularly useful to replicate coloration from nature. Different coloration effects that result from the defined structure of the self-assembled colloids are introduced and it is highlighted how these optical properties can be translated into photonic pigments by modifications of the assembly processes. The importance of absorbing elements, as well as the role of surface chemistry and wettability to control structural coloration is discussed. Finally, approaches to integrate dynamic control of coloration into such self-assembled photonic pigments are outlined.

Facile colloidal coating of polystyrene nanospheres with tunable gold dendritic patches.

Patchy particles comprise regions of differing material or chemical functionality on otherwise isotropic cores. To meet the great potential of these anisotropic structures in a wide range of application fields, completely new approaches are sought for the scalable and tunable production of patchy particles, particularly those with nanoscale dimensions. In this paper the synthesis of patchy particles via a simple colloidal route is investigated. Using surfactant-free cationic polystyrene nanospheres as core particles, gold patches are produced through the in situ reduction of chloroauric acid with ascorbic acid. The fact that such nanostructured metal patches can be heterogeneously nucleated on polymer nanospheres is related to the electrostatic interaction between core and metal precursor. Furthermore, the lateral expansion of the gold patches over the polystyrene surface is facilitated by an excess of ascorbic acid. The morphology of the patches is highly dendritic and process-induced variations in the structure are related to gold surface mobility using Monte Carlo simulations based on the diffusion limited aggregation principle. Considering the pH dependent behaviour of ascorbic acid it is possible to predict the moiety which most likely adsorbs to the polymer surface and promotes gold surface diffusion. This enables the judicious adjustment of the pH to also obtain non-dendritic patches. On account of the plasmonic behaviour of gold, the patchy particles have morphology-dependent optical properties. The systematic development of the synthetic approach described here is expected to lay a foundation for the development of functional materials based on the self- or directed-assembly of nanoscale building blocks with anisotropic interactions and properties.

Shedding light on the growth of gold nanoshells.

Nanostructured particles containing noble metals can have highly tunable localized surface plasmon resonances and are therefore of particular interest for numerous applications. Nanoshells comprising a dielectric core and gold or silver shell are a widely researched systems because of the strong dependence of their optical properties on the ratio of core diameter to shell thickness. Although seeded-growth procedures have been developed to produce these particles, the many reported studies show significant variation in the nanoshell morphologies and hence optical properties. In order to establish processes that reproducibly synthesize nanoshells with high optical quality, it is necessary to develop techniques that monitor changes at the core particle surface during shell growth. For that purpose, we have carried out in situ nonlinear second-harmonic scattering (SHS) and linear vis-NIR extinction spectroscopy simultaneously during the seeded growth of gold nanoshells on silica core particles. Our SHS measurements show a striking variation in the nonlinear optical properties of the growing gold nanoshells. In comparison with linear optical measurements and with scanning electron microscopy (SEM) images made of gold nanoshells produced with varying shell completenesses, the SHS signal was observed to reach a peak intensity at a stage prior to shell closure. We attribute this high sensitivity of the SHS signal to the incomplete nanoshell surface morphology to the generation and subsequent degeneration of regions of electric field enhancement at gaps between isolated gold islands, which grow and coalesce. This conclusion is corroborated by finite-difference time-domain simulations of incomplete nanoshells. We suggest that the in situ analytical approach demonstrated here offers significant promise for future activities regarding the in-process optimization of the morphology and optical properties of metal nanoshells and other nanostructured plasmonic particles.

Highly magnetizable superparamagnetic colloidal aggregates with narrowed size distribution from ferrofluid emulsion.

The formation of spherical superparamagnetic colloidal aggregates of magnetite nanoparticles by emulsification of a ferrofluid and subsequent solvent evaporation has been systematically studied. The colloidal aggregates occur as a dense sphere with magnetite nanoparticles randomly packed and preserved particle-particle separation due to chemisorbed oleic acid. The voids between nanoparticles are filled with solvent and free oleic acid. The latter was found to influence the formation of colloidal aggregates and their surface properties. The choice of surfactant, whether low molecular weight or polymeric, was shown to lead to the colloidal aggregates having tailored interfacial behavior. Magnetization measurements at ambient temperature revealed that the magnetite colloidal aggregates preserve the superparamagnetic properties of the starting nanoparticle units and show high saturation magnetization values up to 57 emu/g. The size distribution of magnetite nanoparticle colloidal aggregates produced by such an approach was found to be a function of emulsion droplet breakup-coalescence and stabilization kinetics and therefore is influenced by the emulsification process conditions and concentrations of the emulsion compounds.

Synthesis of silver nanoparticle necklaces without explicit addition of reducing or templating agents.

Here we report that silver nanoparticle necklaces can be readily formed by treatment of colloidal silica with ammoniacal silver complex solution followed by washing, deposition and ageing. We investigate the morphology of the produced materials and elucidate the key variables that influence this promising new approach to one-dimensional nanostructuring.

Determination of the quantum dot band gap dependence on particle size from optical absorbance and transmission electron microscopy measurements.

This work addresses the determination of arbitrarily shaped particle size distributions (PSDs) from PbS and PbSe quantum dot (QD) optical absorbance spectra in order to arrive at a relationship between band gap energy and particle size over a large size range. Using a modified algorithm which was previously developed for ZnO, we take only bulk absorption data from the literature and match the PSDs derived from QD absorbance spectra with those from transmission electron microscopical (TEM) image analysis in order to arrive at the functional dependence of the band gap on particle size. Additional samples sized solely from their absorbance spectra with our algorithm show excellent agreement with TEM results. We investigate the influence of parameters of the TEM image analysis such as threshold value on the final result. The band gap versus size relationship developed from analysis of just two samples lies well within the bounds of a number of published data sets. We believe that our methodology provides an attractive shortcut for the study of various novel quantum-confined direct band gap semiconductor systems as it permits the band gap energies of a broad size range of QDs to be probed with relatively few synthetic experiments and without quantum mechanical simulations.

Painting by numbers: nanoparticle-based colorants in the post-empirical age.

The visual appearance of the artificial world is largely governed by films or composites containing particles with at least one dimension smaller than a micron. Over the past century and a half, the optical properties of such materials have been scrutinized and a broad range of colorant products, based mostly on empirical microstructural improvements, developed. With the advent of advanced synthetic approaches capable of tailoring particle shape, size and composition on the nanoscale, the question of what is the optimum particle for a certain optical property can no longer be answered solely by experimentation. Instead, new and improved computational approaches are required to invert the structure-function relationship. This progress report reviews the development in our understanding of this relationship and indicates recent examples of how theoretical design is taking an ever increasingly important role in the search for enhanced or multifunctional colorants.