A comparison of the TempO-Seq and Affymetrix microarray platform using RTqPCR validation.

Next-generation risk assessment relies on mechanistic data from new approach methods, including transcriptome data. Various technologies, such as high-throughput targeted sequencing methods and microarray technologies based on hybridization with complementary probes, are used to determine differentially expressed genes (DEGs). The integration of data from different technologies requires a good understanding of the differences arising from the use of various technologies.To better understand the differences between the TempO-Seq platform and Affymetrix chip technology, whole-genome data for the volatile compound dimethylamine were compared. Selected DEGs were also confirmed using RTqPCR validation. Although the overlap of DEGs between TempO-Seq and Affymetrix was no higher than 37%, a comparison of the gene regulation in terms of log2fold changes revealed a very high concordance. RTqPCR confirmed the majority of DEGs from either platform in the examined dataset. Only a few conflicts were found (11%), while 22% were not confirmed, and 3% were not detected.Despite the observed differences between the two platforms, both can be validated using RTqPCR. Here we highlight some of the differences between the two platforms and discuss their applications in toxicology.

Development of a non-target strategy for evaluation of potential biological effects of inhalable aerosols generated during purposeful room conditioning using an in vitro inhalation model.

OBJECTIVES: An integrated in vitro inhalation approach was outlined to estimate potential adverse acute inhalation effects of aerosols from commercial nebulizer applications used for purposeful room conditioning such as disinfection, scenting or others. Aerosol characterization, exposure estimation and evaluation of acute biological effects by in vitro inhalation were included to generate dose-response data, allowing for determination of in vitro lowest observable adverse effect levels (LOAELs). Correlation of these to estimates of human lung deposition was included for quantitative in vitro to in vivo extrapolation approach (QIVIVE) for acute effects during human exposure. METHODS: To test the proposed approach, a case study was undertaken using two realistic test materials. An acute in vitro inhalation setup with air-liquid interface A549-cells in an optimized exposure situation (P.R.I.T.® ExpoCube®) was used to expose cells and analysis of relevant biological effects (viability, mitochondrial membrane potential, stress, IL-8 release) was carried out. RESULTS: The observed dose-responsive effects in a sub-toxic dose-range could be attributed to the main component of one test material and its presence in the aerosol phase of the nebulized material. QIVIVE resulted in a factor of at least 256 between the in vitro LOAEL and the estimated acute human lung exposure for this test material. CONCLUSIONS: The case-study shows the value of the non-target in vitro inhalation testing approach especially in case of a lack of knowledge on complex product composition. It is expected that approaches like this will be of high value for product safety and environmental health in the future.

Design of a routine in vitro inhalation approach to estimate biological effects of nebulized products.Application in a case study on a potential real product for purposeful room conditioning by use of a commercial nebulizer.Combining results from aerosol characterization and in vitro inhalation experiments allowed for comprehensive correlation of product composition, aerosol properties and biological effects.Assignment of sub-toxic biological effects to a specific product component enabled identification of a product composition with potentially even less biological effect.Combined in vivo exposure estimation and in vitro LOAEL determination enabled a QIVIVE approach.

Substantiate a read-across hypothesis by using transcriptome data-A case study on volatile diketones.

This case study explores the applicability of transcriptome data to characterize a common mechanism of action within groups of short-chain aliphatic α-, ß-, and γ-diketones. Human reference in vivo data indicate that the α-diketone diacetyl induces bronchiolitis obliterans in workers involved in the preparation of microwave popcorn. The other three α-diketones induced inflammatory responses in preclinical in vivo animal studies, whereas beta and gamma diketones in addition caused neuronal effects. We investigated early transcriptional responses in primary human bronchiolar (PBEC) cell cultures after 24 h and 72 h of air-liquid exposure. Differentially expressed genes (DEGs) were assessed based on transcriptome data generated with the EUToxRisk gene panel of Temp-O-Seq®. For each individual substance, genes were identified displaying a consistent differential expression across dose and exposure duration. The log fold change values of the DEG profiles indicate that α- and ß-diketones are more active compared to γ-diketones. α-diketones in particular showed a highly concordant expression pattern, which may serve as a first indication of the shared mode of action. In order to gain a better mechanistic understanding, the resultant DEGs were submitted to a pathway analysis using ConsensusPathDB. The four α-diketones showed very similar results with regard to the number of activated and shared pathways. Overall, the number of signaling pathways decreased from α-to ß-to γ-diketones. Additionally, we reconstructed networks of genes that interact with one another and are associated with different adverse outcomes such as fibrosis, inflammation or apoptosis using the TRANSPATH-database. Transcription factor enrichment and upstream analyses with the geneXplain platform revealed highly interacting gene products (called master regulators, MRs) per case study compound. The mapping of the resultant MRs on the reconstructed networks, visualized similar gene regulation with regard to fibrosis, inflammation and apoptosis. This analysis showed that transcriptome data can strengthen the similarity assessment of compounds, which is of particular importance, e.g., in read-across approaches. It is one important step towards grouping of compounds based on biological profiles.

In vitro inhalation cytotoxicity testing of therapeutic nanosystems for pulmonary infection.

Due to the increasing need of new treatment options against bacterial lung infections, novel antimicrobial peptides (AMPs) are under development. Local bioavailability and less systemic exposure lead to the inhalation route of administration. Combining AMPs with nanocarriers (NCs) into nanosystems (NSs) might be a technique for improved results. An air-liquid interface (ALI) in vitro inhalation model was set up including a human alveolar lung cell line (A549) and an optimized exposure system (P.R.I.T.® ExpoCube®) to predict acute local lung toxicity. The approach including aerosol controls (cupper-II-sulfate and lactose) delivered lowest observable adverse effect levels (LOAELs). Different combinations of AMPs (AA139, M33) and NCs (polymeric nanoparticles (PNPs), micelles and liposomes) were tested under ALI and submerged in vitro conditions. Depending on the nature of AMP and NCs, packing of AMPs into NSs reduced the AMP-related toxicity. Large differences were found between the LOAELs determined by submerged or ALI testing with the ALI approach indicating higher sensitivity of the ALI model. Since aerosol droplet exposure is in vivo relevant, it is assumed that ALI based results represents the more significant source than submerged testing for in vivo prediction of local acute lung toxicity. In accordance with the current state-of-the-art view, this study shows that ALI in vitro inhalation models are promising tools to further develop in vitro methods in the field of inhalation toxicology.

Evaluation of a human in vitro hepatocyte-NPC co-culture model for the prediction of idiosyncratic drug-induced liver injury: A pilot study.

Interactions between hepatocytes and immune cells as well as inflammatory episodes are frequently discussed to play a critical role in the alteration of the individual susceptibility to idiosyncratic drug-induced liver injury (iDILI). To evaluate this hypothesis and to face the urgent need for predictive in vitro models, we established two co-culture systems based on two human cell lines in presence or absence of pro-inflammatory factors (LPS, TNF), i.e. hepatoma HepG2 cells co-cultured with monocytic or macrophage-like THP-1 cells. HepG2 monocultures served as control scenario. Mono- or co-cultures were treated with iDILI reference substances (Troglitazone [TGZ], Trovafloxacin [TVX], Diclofenac [DcL], Ketoconazole [KC]) or their non-iDILI partner compounds (Rosiglitazone, Levofloxacin, Acetylsalicylic Acid, Fluconazole). The liver cell viability was subsequently determined via WST-Assay. An enhanced cytotoxicity (synergy) or a hormetic response compared to the drug effect in the HepG2 monoculture was considered as iDILI positive. TGZ synergized in co-cultures with monocytes without an additional pro-inflammatory stimulus, while DcL and KC showed a hormetic response. All iDILI drugs synergized with TNF in the simple HepG2 monoculture, indicating its relevance as an initiator of iDILI. KC showed a synergy when co-exposed to both, monocytes and LPS, while TVX and DcL showed a synergy under the same conditions with macrophages. All described iDILI responses were not observed with the corresponding non-iDILI partner compounds. Our first results confirm that an inflammatory environment increases the sensitivity of liver cells towards iDILI compounds and point to an involvement of pro-inflammatory factors, especially TNF, in the development of iDILI.

Maintenance of high quality rat precision cut liver slices during culture to study hepatotoxic responses: Acetaminophen as a model compound.

Precision cut liver slices (PCLiS) represent a promising tool in reflecting hepatotoxic responses. However, the culture of PCLiS varies considerably between laboratories, which can affect the performance of the liver slices and thus the experimental outcome. In this study, we describe an easily accessible culture method, which ensures optimal slice viability and functionality, in order to set the basis for reproducible and comparable PCLiS studies. The quality of the incubated rat PCLiS was assessed during a 24h culture period using ten readouts, which covered viability (lactate dehydrogenase-, aspartate transaminase- and glutamate dehydrogenase-leakage, ATP content) and functionality parameters (urea, albumin production) as well as histomorphology and other descriptive characteristics (protein content, wet weight, slice thickness). The present culture method resulted in high quality liver slices for 24h. Finally, PCLiS were exposed to increasing concentrations of acetaminophen to assess the suitability of the model for the detection of hepatotoxic responses. Six out of ten readouts revealed a toxic effect and showed an excellent mutual correlation. ATP, albumin and histomorphology measurements were identified as the most sensitive readouts. In conclusion, our results indicate that rat PCLiS are a valuable liver model for hepatotoxicity studies, particularly if they are cultured under optimal standardized conditions.

An improved in vitro model for testing the pulmonary toxicity of complex mixtures such as cigarette smoke.

Numerous approaches have been employed for testing the biological activity of cigarette smoke in vitro. None of them has managed to expose cultured lung cells in a realistic manner to the complex gaseous and particulate mixture that constitutes cigarette smoke. We have devised a system that makes this possible. The system presented here enables the direct exposure of human lung cells to native, unmodified cigarette mainstream smoke. It consists of a smoking machine, a dilution device for the smoke, analytical devices for online monitoring and a specially adapted exposure module based on the Cultex** cell cultivation system that is equipped with a gas-exposure top. Due to the special design of the exposure device and the optimised exposure conditions, this equipment allows cultured human lung cells to be exposed to freshly generated cigarette mainstream smoke. Exploratory experiments revealed that the smoke could be diluted over a wide concentration range in a reproducible way with respect to gas and particulate phases, and also demonstrated reproducible particle deposition depending on smoke concentration. Furthermore, it was shown that the exposed cells maintained their viability. Native cigarette mainstream smoke induced dose-dependent cellular effects in exposed cells with respect to cellular viability (viable cell number monitored by tetrazolium salt cleavage) and intracellular parameters (ATP and glutathione content). Therefore, fresh, physically and chemically unmodified cigarette mainstream smoke can be tested using this novel system.

A method for the in vitro exposure of human cells to environmental and complex gaseous mixtures: application to various types of atmosphere.

The application of in vitro methods to the analysis of the effects of airborne materials is still limited, because there are no generally accepted concepts and technologies for efficiently exposing adherent growing cells to test atmospheres, especially those comprising complex mixtures of gaseous and particulate phases. The introduction of in vitro research into the field of inhalation toxicology offers a unique possibility for using human cells and tissues for pre-screening studies, thus reducing the necessity for animal experiments, and cutting the numbers of animals used in toxicological testing. We therefore developed a novel experimental concept that uses an exposure device based on the cell cultivation system CULTEX (Patent No. DE 198011763; PCT/EP99/00295). This allowed us to investigate environmental atmospheres, which were chemically and physically unmodified, in an in vitro system, by exposing the target cells directly at the air/liquid interface. The exposure device itself is small and flexible enough to be connected to a variety of aerosol-generating systems without the need for an incubator, as it fulfils all the requirements for maintaining cell viability over a defined period. The general applicability and the sensitivity of this in vitro approach for testing various generated atmospheres under the same cell-exposure conditions were demonstrated by studying dose-dependent cytotoxic effects in human lung epithelial cells exposed to air contaminated with single gases or complex mixtures, such as diesel exhaust fumes and side-stream cigarette smoke.

Genotoxicity testing in vitro - development of a higher throughput analysis method based on the comet assay.

Higher throughput methods, high content analysis and automated screening methods are of highest demand in drug development today. In toxicology, these strategies are becoming increasingly important, as well. Therefore, an integrated higher throughput method for the comet assay is addressed by the development presented here. The sensitivity, specificity and relevance of the comet assay as a method for determination of DNA damage in vivo and in vitro have been highlighted in many studies. Actually, efforts are made to include it in a panel of genotoxicity tests for regulatory purposes. However, the standard comet assay is a time consuming procedure due to the specific methods needed. The improvements presented here lead to a faster and easier slide-production, a smaller amount of cells needed, a higher amount of comets quantified, a fully automated analysis of comets including reanalysis, storing, visualisation and documentation possibilities using standard comet quantification models such as tail length or tail moment, and - by introduction of clearly definable selection criteria based on image analysis algorithms - clearly improve objectivity and standardization of the analysis procedure. Results prove the high reproducibility, flexibility, efficiency and suitability of the procedure as a fully automated analysis method in higher throughput genotoxicity testing in vitro.

Comparative assessment of toxicities of mainstream smoke from commercial cigarettes.

Three cigarette types were compared using an experimental approach for quantifying selected toxicological effects of diluted fresh whole cigarette mainstream smoke in vitro. The test procedure involved automatic smoking of cigarettes according to the FTC/ISO standard, online monitoring of generated smoke aerosols with respect to particulate and gas-phase components, and direct exposure of a human type II-like lung cell line (A549) using exposure conditions relevant to human smoking. Test specimens were the K1R4F standard research cigarettes (9.2 mg tar/cigarette) and two commercial European light filter cigarettes (brand 1, brand 2) having the same tar content (7.0 mg/cigarette). As a representative of the toxicological effect of smoke, intracellular reduced glutathione was analyzed directly after exposure of cells. Results revealed statistically significant different quantitative effects with regard to glutathione depletion when comparing whole smoke and filtered smoke from all three cigarettes. ED50 values revealed a depletion of reduced glutathione by brand 1 cigarettes that was more than twice the depletion caused by brand 2 cigarettes on a per cigarette basis. Also, quantitatively different effects were found on a per particle and on a per CO concentration basis using whole or filtered smoke from the cigarettes. We conclude that the methods we employed provide sensitive and reproducible ways of detecting differences in the toxicological action of smoke from various types of cigarettes.

Exposure of human lung cells to inhalable substances: a novel test strategy involving clean air exposure periods using whole diluted cigarette mainstream smoke.

An experimental approach was established for the validation of an in vitro test system for complex environmental test atmospheres consisting of both gaseous substances and particulates. Smoke from two different cigarette types (generated by an automatic cigarette-smoking machine) was employed to assess both the sensitivity and the specificity of the system. The smoke was diluted with synthetic air and used to expose human lung cells grown on microporous membranes. Cells were exposed alternately to diluted cigarette smoke and pure synthetic air. The effect of diluted smoke was assessed without humidification, addition of CO2, or any other physical or chemical modification of the smoke. The experimental setup included online monitoring of the gas phase (by analysis of CO concentration) and particulate phase (by light-scattering photometry). Replicate experiments confirmed a reproducible generation and dilution of the smoke and a smoke age of about 7 s at the time it came into contact with the cells. Experiments using human lung cells revealed that smoke from the two different cigarette types induced different levels of dose-dependent toxicity. A cell exposure of 6 min using 6 alternating smoke and synthetic air periods was sufficient to cause different effects as measured by intracellular glutathione content. The fact that the system could differentiate between two different types of cigarette smoke demonstrated its high sensitivity and specificity. The system offers new ways to test native complex gaseous and aerosol mixtures in vitro using short exposure times and very small amounts of test substances.