Growth mechanisms and anisotropic softness-dependent conductivity of orientation-controllable metal-organic framework nanofilms.

Conductive metal-organic frameworks (cMOFs) manifest great potential in modern electrical devices due to their porous nature and the ability to conduct charges in a regular network. cMOFs applied in electrical devices normally hybridize with other materials, especially a substrate. Therefore, the precise control of the interface between cMOF and a substrate is particularly crucial. However, the unexplored interface chemistry of cMOFs makes the controlled synthesis and advanced characterization of high-quality thin films, particularly challenging. Herein, we report the development of a simplified synthesis method to grow "face-on" and "edge-on" cMOF nanofilms on substrates, and the establishment of operando characterization methodology using atomic force microscopy and X-ray, thereby demonstrating the relationship between the soft structure of surface-mounted oriented networks and their characteristic conductive functions. As a result, crystallinity of cMOF nanofilms with a thickness down to a few nanometers is obtained, the possible growth mechanisms are proposed, and the interesting anisotropic softness-dependent conducting properties (over 2 orders of magnitude change) of the cMOF are also illustrated.

Integrated Soft Porosity and Electrical Properties of Conductive-on-Insulating Metal-Organic Framework Nanocrystals.

A one-stone, two-bird method to integrate the soft porosity and electrical properties of distinct metal-organic frameworks (MOFs) into a single material involves the design of conductive-on-insulating MOF (cMOF-on-iMOF) heterostructures that allow for direct electrical control. Herein, we report the synthesis of cMOF-on-iMOF heterostructures using a seeded layer-by-layer method, in which the sorptive iMOF core is combined with chemiresistive cMOF shells. The resulting cMOF-on-iMOF heterostructures exhibit enhanced selective sorption of CO2 compared to the pristine iMOF (298 K, 1 bar, S CO 2 / H 2 ${{_{{\rm CO}{_{2}}/{\rm H}{_{2}}}}}$ from 15.4 of ZIF-7 to 43.2-152.8). This enhancement is attributed to the porous interface formed by the hybridization of both frameworks at the molecular level. Furthermore, owing to the flexible structure of the iMOF core, the cMOF-on-iMOF heterostructures with semiconductive soft porous interfaces demonstrated high flexibility in sensing and electrical "shape memory" toward acetone and CO2 . This behavior was observed through the guest-induced structural changes of the iMOF core, as revealed by the operando synchrotron grazing incidence wide-angle X-ray scattering measurements.

Orbital-Energy Modulation of Tetrabenzoporphyrin-Derived Non-Fullerene Acceptors for Improved Open-Circuit Voltage in Organic Solar Cells.

Tetrabenzoporphyrin (BP) holds attractive characteristics for optoelectronic applications, such as the large π-conjugated framework and high photoabsorption capability. However, its use in organic solar cells (OSCs) has been limited because of the extremely low solubility that hampers direct solution processing and also the high frontier-orbital energies that lead to low open-circuit voltage (VOC). Herein, we examine BP derivatives equipped with multiple strongly electron-withdrawing groups for photovoltaic applications. The derivatives are generated in thin films through a thermal precursor approach, wherein the corresponding bicyclo[2.2.2]octadiene-fused porphyrin derivatives are solution-cast, and then annealed to carry out the in situ retro-Diels-Alder reaction. The frontier-orbital energies of the resulting derivatives are effectively stabilized as compared to pristine BP to such a degree that they afford high VOC of up to 0.94 V when used as a donor or can even work as a new class of nonfullerene acceptor in OSCs. Single-crystal X-ray diffraction analyses demonstrate that the conformation of the BP framework largely varies from being near planar to highly curved depending on its substituents. The morphology of polymer:BP-derivative bulk-heterojunction films prepared by the thermal precursor approach also varies between the BP derivatives. These results can greatly extend the scope of both molecular design and morphology control for utilization of the BP chromophore toward achieving viable organic optoelectronic devices.

Organic Photovoltaic Devices Based on Oriented n-Type Molecular Films Deposited on Oriented Polythiophene Films.

The molecular orientation of π-conjugated molecules has been reported to significantly affect the performance of organic photovoltaic devices (OPVs) based on molecular films. Hence, the control of molecular orientation is a key issue toward the improvement of OPV performance. In this research, oriented thin films of an n-type molecule, 3,4,9,10-Perylenetetracarboxylic Bisbenzimida-zole (PTCBI), were formed by deposition on in-plane oriented polythiophene (PT) films. Orientation of the PTCBI films was evaluated by polarized UV-vis spectroscopy and 2D-Grazing incidence X-ray diffraction. Results indicated that PTCBI molecules on PT film exhibit nearly edge-on and in-plane orientation (with molecular long axis along the substrate), whereas PTCBI molecules without PT film exhibit neither. OPVs composed of PTCBI molecular film with and without PT were fabricated and evaluated for correlation of orientation with performance. The OPVs composed of PTCBI film with PT showed higher power conversion efficiency (PCE) than that of film without PT. The experiment indicated that in-plane orientation of PTCBI molecules absorbs incident light more efficiently, leading to increase in PCE.

Terazulene Isomers: Polarity Change of OFETs through Molecular Orbital Distribution Contrast.

Intermolecular orbital coupling is fundamentally important to organic semiconductor performance. Recently, we reported that 2,6':2',6″-terazulene (TAz1) exhibited excellent performance as an n-type organic field-effect transistor (OFET) via molecular orbital distribution control. To validate and develop this concept, here we present three other terazulene regioisomers, which have three azulene molecules connected at the 2- or 6-position along the long axis of the azulene, thus constructing a linear expanded π-conjugation system: 2,2':6',2″-terazulene (TAz2), 2,2':6',6″-terazulene (TAz3), and 6,2':6',6″-terazulene (TAz4). TAz2 and TAz3 exhibit ambipolar characteristics; TAz4 exhibits clear n-type transistor behavior as an OFET. The lowest unoccupied molecular orbitals (LUMOs) of all terazulenes are fully delocalized over the entire molecule. In contrast, the highest occupied molecular orbitals (HOMOs) of TAz2 and TAz3 are delocalized over the 2,2'-biazulene units; the HOMOs of TAz4 are localized at one end of the azulene unit. These findings confirm that terazulene isomers which are simple hydrocarbon compounds are versatile materials with a tunable-polarity FET characteristic that depends on the direction of the azulene unit and the related contrast of the molecular orbital distribution in the terazulene backbone.

Implication of Fluorine Atom on Electronic Properties, Ordering Structures, and Photovoltaic Performance in Naphthobisthiadiazole-Based Semiconducting Polymers.

The development of semiconducting polymers is imperative to improve the performance of polymer-based solar cells (PSCs). In this study, new semiconducting polymers based on naphtho[1,2-c:5,6-c']bis[1,2,5]thiadiazole (NTz), PNTz4TF2 and PNTz4TF4, having 3,3'-difluoro-2,2'-bithiophene and 3,3',4,4'-tetrafluoro-2,2'-bithiophene, respectively, are designed and synthesized. These polymers possess a deeper HOMO energy level than their counterpart, PNTz4T, which results in higher open-circuit voltages in solar cells. This concequently reduces the photon energy loss that is one of the most important issues surrounding PSCs. The PNTz4TF4 cell exhibits up to 6.5% power conversion efficiency (PCE), whereas the PNTz4TF2 cell demonstrates outstanding device performance with as high as 10.5% PCE, which is quite high for PSCs. We further discuss the performances of the PSCs based on these polymers by correlating the charge generation and recombination dynamics with the polymer structure and ordering structure. We believe that the results provide new insights into the design of semiconducting polymers and that there is still much room for improvement of PSC efficiency.

Crystallization Dynamics of Organolead Halide Perovskite by Real-Time X-ray Diffraction.

We analyzed the crystallization process of the CH3NH3PbI3 perovskite by observing real-time X-ray diffraction immediately after combining a PbI2 thin film with a CH3NH3I solution. A detailed analysis of the transformation kinetics demonstrated the fractal diffusion of the CH3NH3I solution into the PbI2 film. Moreover, the perovskite crystal was found to be initially oriented based on the PbI2 crystal orientation but to gradually transition to a random orientation. The fluctuating characteristics of the crystallization process of perovskites, such as fractal penetration and orientational transformation, should be controlled to allow the fabrication of high-quality perovskite crystals. The characteristic reaction dynamics observed in this study should assist in establishing reproducible fabrication processes for perovskite solar cells.

5, 10-linked naphthodithiophenes as the building block for semiconducting polymers.

We present new semiconducting polymers incorporating naphtho[1, 2-b:5, 6-b'] dithiophene (NDT3) and naphtho[2, 1-b:6, 5-b'] dithiophene (NDT4), which are linked at the naphthalene positions, in the polymer backbone. It is interesting that the trend in the ordering structure and thus charge transport properties are quite different from what were observed in the isomeric polymers where the NDT3 and NDT4 cores are linked at the thiophene α-positions. In the thiophene-linked NDT system, the NDT3-based polymer (PNDT3BT) gave the better ordering in thin films and thus the high charge carrier mobility compared to the NDT4-based polymer (PNDT4BT). In the meantime, in the naphthalene-linked NDT system, the NDT4-based polymer (PNDT4iBT) provided the superior properties. Considering that PNDT4iBT has relatively low highest occupied molecular orbital (HOMO) energy level (-5.2 eV) and moderately high mobilities in the order of 10-2 cm2 V-1 s-1, the NDT4 core, when linked at the naphthalene positions, can be a good building unit for the development of high-performance semiconducting polymers for both organic field-effect transistors and photovoltaic devices.

End-on orientation of semiconducting polymers in thin films induced by surface segregation of fluoroalkyl chains.

Controlling the orientation of highly anisotropic structures of polymers is important because the majority of their mechanical, electronic, and optical properties depend on the orientation of the polymer backbone. In thin films, the polymer chains tend to adopt an orientation parallel to the substrate; therefore, forcing the chains to stand perpendicular to the substrate is challenging. We have developed a simple way to achieve this end-on orientation. We functionalized one end of a poly(3-butylthiophene) (P3BT) chain with a 1H,1H,2H,2H,3H,3H-perfluoroundecyl group, which caused spontaneous self-segregation of the polymer (P3BT-F17) to the surface of the polymer film. In P3BT-F17/polystyrene (PS) blend films, a highly ordered end-on orientation of the conjugated backbone was observed in the surface-segregated layer of the crystalline P3BT-F17. Furthermore, when the film was spin-coated from a mixture of P3BT-F17 and P3BT, the chain orientation of P3BT-F17 at the surface forced the P3BT in the bulk of the film to adopt the end-on orientation because of the high crystallinity of P3BT. The electronic conductivity measured perpendicular to the film surface also reflected the end-on orientation in the bulk, resulting in a more than 30-fold enhancement of the hole mobility.

Naphthodithiophene-naphthobisthiadiazole copolymers for solar cells: alkylation drives the polymer backbone flat and promotes efficiency.

We show that rational functionalization of the naphthodithiophene core in copolymers based on naphthodithiophene and naphthobisthiadiazole improves the solubility without an alteration of the electronic structure. Surprisingly, the introduction of linear alkyl chains brings about a drastic change in polymer orientation into the face-on motif, which is beneficial for the charge transport in solar cells. As a result, the present polymers exhibit high power conversion efficiencies of up to ~8.2% in conventional single-junction solar cells.

Stability of silicon-tin alloyed nanocrystals with high tin concentration synthesized by femtosecond laser plasma in liquid media.

Nanocrystals have a great potential for future materials with tunable bandgap, due to their optical properties that are related with the material used, their sizes and their surface termination. Here, we concentrate on the silicon-tin alloy for photovoltaic applications due to their bandgap, lower than bulk Si, and also the possibility to activate direct band to band transition for high tin concentration. We synthesized silicon-tin alloy nanocrystals (SiSn-NCs) with diameter of about 2-3 nm by confined plasma technique employing a femtosecond laser irradiation on amorphous silicon-tin substrate submerged in liquid media. The tin concentration is estimated to be [Formula: see text], being the highest Sn concentration for SiSn-NCs reported so far. Our SiSn-NCs have a well-defined zinc-blend structure and, contrary to pure tin NCs, also an excellent thermal stability comparable to highly stable silicon NCs. We demonstrate by means of high resolution synchrotron XRD analysis (SPring 8) that the SiSn-NCs remain stable from room temperature up to [Formula: see text] with a relatively small expansion of the crystal lattice. The high thermal stability observed experimentally is rationalized by means of first-principle calculations.

Nonpolymer Organic Solar Cells: Microscopic Phonon Control to Suppress Nonradiative Voltage Loss via Charge-Separated State.

Recent remarkable developments on nonfullerene solar cells have reached a photoelectric conversion efficiency (PCE) of 18% by tuning the band energy levels in small molecular acceptors. In this regard, understanding the impact of small donor molecules on nonpolymer solar cells is essential. Here, we systematically investigated mechanisms of solar cell performance using diketopyrrolopyrrole (DPP)-tetrabenzoporphyrin (BP) conjugates of C4-DPP-H2BP and C4-DPP-ZnBP, where C4 represents the butyl group substituted at the DPP unit as small p-type molecules, while an acceptor of [6,6]-phenyl-C61-buthylic acid methyl ester is employed. We clarified the microscopic origins of the photocarrier caused by phonon-assisted one-dimensional (1D) electron-hole dissociations at the donor-acceptor interface. Using a time-resolved electron paramagnetic resonance, we have characterized controlled charge-recombination by manipulating disorders in π-π donor stacking. This ensures carrier transport through stacking molecular conformations to suppress nonradiative voltage loss capturing specific interfacial radical pairs separated by 1.8 nm in bulk-heterojunction solar cells. We show that, while disordered lattice motions by the π-π stackings via zinc ligation are essential to enhance the entropy for charge dissociations at the interface, too much ordered crystallinity causes the backscattering phonon to reduce the open-circuit voltage by geminate charge-recombination.

Star-shape non-fullerene acceptor featuring an aza-triangulene core for organic solar cells.

We present the simple synthesis of a star-shape non-fullerene acceptor (NFA) for application in organic solar cells. This NFA possesses a D(A)3 structure in which the electron-donating core is an aza-triangulene unit and we report the first crystal structure for a star shape NFA based on this motive. We fully characterized this molecule's optoelectronic properties in solution and thin films, investigating its photovoltaic properties when blended with PTB7-Th as the electron donor component. We demonstrate that the aza-triangulene core leads to a strong absorption in the visible range with an absorption edge going from 700 nm in solution to above 850 nm in the solid state. The transport properties of the pristine molecule were investigated in field effect transistors (OFETs) and in blends with PTB7-Th following a Space-Charge-Limited Current (SCLC) protocol. We found that the mobility of electrons measured in films deposited from o-xylene and chlorobenzene are quite similar (up to 2.70 × 10-4 cm2 V-1 s-1) and that the values are not significantly modified by thermal annealing. The new NFA combined with PTB7-Th in the active layer of inverted solar cells leads to a power conversion efficiency of around 6.3% (active area 0.16 cm2) when processed from non-chlorinated solvents without thermal annealing. Thanks to impedance spectroscopy measurements performed on the solar cells, we show that the charge collection efficiency of the devices is limited by the transport properties rather than by recombination kinetics. Finally, we investigated the stability of this new NFA in various conditions and show that the star-shape molecule is more resistant against photolysis in the presence and absence of oxygen than ITIC.

Synthesis, characterization, and transistor and solar cell applications of a naphthobisthiadiazole-based semiconducting polymer.

We report the synthesis and characterization of a novel donor-acceptor semiconducting polymer bearing naphthobisthiadiazole (NTz), a doubly benzothiadiazole (BTz)-fused ring, and its applications to organic field-effect transistors and bulk heterojunction solar cells. With NTz's highly π-extended structure and strong electron affinity, the NTz-based polymer (PNTz4T) affords a smaller bandgap and a deeper HOMO level than the BTz-based polymer (PBTz4T). PNTz4T exhibits not only high field-effect mobilities of ~0.56 cm(2)/(V s) but also high photovoltaic properties with power conversion efficiencies of ~6.3%, both of which are significantly high compared to those for PBTz4T. This is most likely due to the more suitable electronic properties and, importantly, the more highly ordered structure of PNTz4T in the thin film than that of PBTz4T, which might originate in the different symmetry between the cores. NTz, with centrosymmetry, can lead to a more linear backbone in the present polymer system than BTz with axisymmetry, which might be favorable for better molecular ordering. These results demonstrate great promise for using NTz as a bulding unit for high-performance semiconducting polymers for both transistors and solar cells.

'Molecular Beam Epitaxy' on Organic Semiconductor Single Crystals: Characterization of Well-Defined Molecular Interfaces by Synchrotron Radiation X-ray Diffraction Techniques.

Epitaxial growth, often termed "epitaxy", is one of the most essential techniques underpinning semiconductor electronics, because crystallinities of the materials seriously dominate operation efficiencies of the electronic devices such as power gain/consumption, response speed, heat loss, and so on. In contrast to already well-established epitaxial growth methodologies for inorganic (covalent or ionic) semiconductors, studies on inter-molecular (van der Waals) epitaxy for organic semiconductors is still in the initial stage. In the present review paper, we briefly summarize recent works on the epitaxial inter-molecular junctions built on organic semiconductor single-crystal surfaces, particularly on single crystals of pentacene and rubrene. Experimental methodologies applicable for the determination of crystal structures of such organic single-crystal-based molecular junctions are also illustrated.

Exploration of Alkyl Group Effects on the Molecular Packing of 5,15-Disubstituted Tetrabenzoporphyrins toward Efficient Charge-Carrier Transport.

The high design flexibility of organic semiconductors should lead to diverse and complex electronic functions. However, currently available high-performance organic semiconductors are limited in variety; most of p-type materials are based on thienoacenes or related one-dimensionally (1D) extended π-conjugated systems. In an effort to expand the diversity of organic semiconductors, we are working on the development of tetrabenzoporphyrin (BP) derivatives as active-layer components of organic electronic devices. BP is characterized by its large, rigid two-dimensionally (2D) extended π-framework with high light absorptivity and therefore is promising as a core building unit of organic semiconductors for optoelectronic applications. Herein, we demonstrate that BP derivatives can afford field-effect hole mobilities of >4 cm2 V-1 s-1 upon careful tuning of substituents. Comparative analysis of a series of 5,15-bis(n-alkyldimethylsilylethynyl)tetrabenzoporphyrins reveals that linear alkyl substituents disrupt the π-π stacking of BP cores, unlike the widely observed "fastener effect" for 1D extended π-systems. The n-octyl and n-dodecyl groups have the best balance between high solution processability and minimal π-π stacking disruption, leading to superior hole mobilities in solution-processed thin films. The resulting thin films show high thermal stability wherein the field-effect hole mobility stays above 1 cm2 V-1 s-1 even after heating at 160 °C in air, reflecting the tight packing of large BP units. These findings will serve as a good basis for extracting the full potential of 2D extended π-frameworks and thus for increasing the structural or functional diversities of high-performance organic semiconductors.

Interface Structures and Electronic States of Epitaxial Tetraazanaphthacene on Single-Crystal Pentacene.

The structural and electronic properties of interfaces composed of donor and acceptor molecules play important roles in the development of organic opto-electronic devices. Epitaxial growth of organic semiconductor molecules offers a possibility to control the interfacial structures and to explore precise properties at the intermolecular contacts. 5,6,11,12-tetraazanaphthacene (TANC) is an acceptor molecule with a molecular structure similar to that of pentacene, a representative donor material, and thus, good compatibility with pentacene is expected. In this study, the physicochemical properties of the molecular interface between TANC and pentacene single crystal (PnSC) substrates were analyzed by atomic force microscopy, grazing-incidence X-ray diffraction (GIXD), and photoelectron spectroscopy. GIXD revealed that TANC molecules assemble into epitaxial overlayers of the (010) oriented crystallites by aligning an axis where the side edges of the molecules face each other along the [1¯10] direction of the PnSC. No apparent interface dipole was found, and the energy level offset between the highest occupied molecular orbitals of TANC and the PnSC was determined to be 1.75 eV, which led to a charge transfer gap width of 0.7 eV at the interface.

Insights into Microscopic Crystal Growth Dynamics of CH3NH3PbI3 under a Laser Deposition Process Revealed by In Situ X-ray Diffraction.

The process dynamics for the vacuum deposition of methylammonium lead iodide (MAPbI3) perovskite was analyzed by in situ X-ray diffraction using synchrotron radiation. MAPbI3 was fabricated by alternatingly supplying PbI2 and methylammonium iodide via a laser deposition system installed at the synchrotron beamline BL46XU at SPring-8, and in situ crystallization analysis was conducted. Microscopic insights into the crystallization were obtained, including observation of Laue oscillation during the PbI2 growth and octahedral unit (PbI6) rotation during the transformation into perovskite. On the basis of this analysis, conditions that favor the construction of atomically flat MAPbI3 perovskite films were deduced.

Quasi-Homoepitaxial Junction of Organic Semiconductors: A Structurally Seamless but Electronically Abrupt Interface between Rubrene and Bis(trifluoromethyl)dimethylrubrene.

Single-crystalline organic semiconductors exhibiting band transport have opened new possibilities for the utilization of efficient charge carrier conduction in organic electronic devices. The epitaxial growth of molecular materials is a promising route for the realization of well-crystallized organic semiconductor p-n junctions for optoelectronic applications enhanced by the improved charge carrier mobility. In this study, the formation of a high-quality crystalline interface upon "quasi-homoepitaxial" growth of bis(trifluoromethyl)dimethylrubrene (fmRub) on the single-crystal surface of rubrene was revealed by using out-of-plane and grazing-incidence X-ray diffraction techniques. Ultraviolet photoelectron spectroscopy results indicated abrupt electronic energy levels and the occurrence of band bending across this quasi-homoepitaxial interface. This study verifies that the minimization of the lattice mismatch enhances the crystalline qualities at the heterojunctions even for van der Waals molecular condensates, potentially opening an untested route for the realization of high-mobility organic semiconductor optoelectronics.

A comparative study of honeycomb-like 2D π-conjugated metal-organic framework chemiresistors: conductivity and channels.

Two-dimensional (2D) π-conjugated conductive metal-organic frameworks (cMOFs, 2DπcMOF) with modulated channel sizes and a broad conductivity range have been reported in the last decade. In contrast, the corresponding comparative studies on their effects on chemiresistive sensing performances, which measure the resistive response toward external chemical stimuli, have not yet been reported. In this work, we sought to explore the structure-performance relationships of honeycomb-like 2D π-conjugated cMOF chemiresistive gas sensors with channel sizes less than 2 nm (the mass transport issue) and broad conductivity in the range from ∼10-8 S cm-1 to 1 S cm-1 (the charge transport issue). As a result, we found that the cMOF with a lower conductivity facilitates the much more sensitive response toward the charge transfer of the adsorbed gases (relative increases in resistance: R = 63.5% toward 100 ppm of NH3 for the as prepared Cu-THQ sensor with the conductivity of ∼10-8 S cm-1). Interestingly, the cMOF with a medium channel size (Cu-THHP-THQ) exhibited the fastest response speed in sensing, although it contains H2en2+ as neutralizing counterions in the channels. From the evaluation of the pore size distribution, it is found that the overall porosity (meso- & micro-pores) of cMOFs, rather than the pore size of the honeycomb structure, would determine their sensing speed. When comparing the performance of two different morphologies of nanorods (NRs) and nanosheets (NSs), NRs showed a slower response and extended recovery time, which can be ascribed to the slower gas diffusion in the more extended 1D channel. Altogether, our results demonstrate the first systematic studies on the effect of various structural parameters on the chemiresistive sensor performance of cMOFs.