Quantifying picomoles of analyte from less than 100 live bacteria: A novel method with a buffering hydrogel as an electrochemical cell.

Microenvironmental changes in the chemical surrounding of bacterial cells might have a profound impact on the ecology of biofilms. However, quantifying total amount of picomoles of analyte from a miniscule number of bacteria is an analytical challenge. Here we provide a novel microliter volume hydrogel based electrochemical cell platform suitable of coulometrically measuring hydrogen peroxide (H2O2) produced by less than 100 cells of Streptococcus sanguinis, a relevant member of the healthy oral microbiome. A morpholine moiety was incorporated into the polymer structure of the hydrogel to create a controlled microenvironment at biological pH. We calculated the buffering capacity of this hydrogel as 0.257 ± 0.135 molHNO3molMEA×ΔpH over the pH range of 7.2-6.2 by using a novel method designed for buffering hydrogels. The H2O2 sensors coated in microliter volume of buffering hydrogel showed no change in sensitivity within the pH range of 7.0-3.0, allowing for H2O2 measurements of S. sanguinis independent of any acid they produce. The novel platform was able to measure down to 22.7 ± 3.5 pmol H2O2 produced by less than 100 bacterial cells, which would otherwise not be attainable in large solution-based assays. These findings indicate that this is a suitable platform for quantifying metabolites from sub-milligram biological samples and may even be suitable for direct analysis of raw biofilms samples with little to no sample pretreatment.

Simultaneous Chemical Mapping of Live Biofilm Microenvironmental pH and Hydrogen Peroxide in Real Time with a Triple Scanning Electrochemical Microscopy Tip.

Dental plaque biofilm is a complex ecosystem. The distribution of microbial species in the biofilm is heavily influenced by local chemical interactions that result from diverse metabolic activities and the nature of the released molecules. As a relevant example, H2O2-producing bacteria can antagonize disease-associated bacteria, leading to the maintenance of a healthy oral microbiome. Herein, we report the development of a triple-sensor (redox, pH, and H2O2) scanning electrochemical microscopy (SECM) tip capable of simultaneously mapping the pH and H2O2 concentration produced by a dental plaque-derived multispecies biofilm grown on hydroxyapatite. The pH sensor of the triple SECM tip showed a near Nernstian slope of -71.1 ± 2 mV/pH (N = 3), whereas the H2O2 sensor showed a slope of -0.052 ± 0.002 nA/µM H2O2 at pH 7.2 and a detection limit of 1.0 ± 0.2 µM (N = 7). There is no significant difference in the sensitivities of H2O2 sensors at pH 6.2, 7.2, and 8.2 at 95% CI (N = 7). The pH and H2O2 sensors demonstrated excellent reversibility with response times of 3 and 5 s, respectively, along with reliable stability over 4 h at 37 °C. The sensors did not show any cross talk between pH and H2O2 concentration ([H2O2]) measurements, highlighting the accuracy and versatility of the SECM tip. Simultaneous chemical imaging of pH and [H2O2] across the biofilm revealed a clustered distribution of local H2O2 concentrations, ranging from 0 to 17 µM. Conversely, the local pH remained constant at 7.2. The relation of local chemical profiles and the distribution of bacterial species within the oral microbiome was experimentally investigated in the context of bacterial H2O2 antagonism. The benefit of clustered H2O2 production was that the total area of H2O2 produced by smaller clusters was 67% more than that of a single cluster with the same starting number of bacteria. Thus, this triple SECM tip can potentially be used to study local molecular mechanisms that result in dysbiosis of the oral microbiome.

Real-Time Monitoring of Biofilm Formation Using a Noninvasive Impedance-Based Method.

Biofilms are complex three-dimensional microbial communities that adhere to a variety of surfaces and interact with their surroundings. Because of the dynamic nature of biofilm formation, establishing a uniform technique for quantifying and monitoring biofilm volume, shape, and features in real-time is challenging. Herein, we describe a noninvasive electrochemical impedance approach for real-time monitoring of dental plaque-derived multispecies biofilm growth on a range of substrates. A working equation relating electrochemical impedance to live biofilm volume has been developed that is applicable to all three surfaces examined, including glass, dental filling resin, and Ca2+-releasing resin composites. Impedance changes of 2.5, 35, 50, and 65% correlated to biofilm volumes of 0.10 ± 0.01, 16.9 ± 2.2, 29.7 ± 2.3, and 38.6 ± 2.8 µm3/µm2, respectively. We discovered that glass, dental filling resin, and Ca2+-releasing dental composites required approximately 3.5, 4.5, and 6 days, respectively, to achieve a 50% change in impedance. The local pH change at the biofilm-substrate interfaces also monitored with potentiometry pH microsensor, and pH change varied according to biofilm volume. This impedance-based technique can be a useful analytical method for monitoring the growth of biofilms on a variety of substrates in real-time. Therefore, this technique may be beneficial for examining antibacterial properties of novel biomaterials.

Calibration-free Solid-State Ion-Selective Electrode Based on a Polarized PEDOT/PEDOT-S-Doped Copolymer as Back Contact.

Solid-contact ion-selective electrodes (ISEs) have the inherent advantage of being miniaturized in addition to maintaining high selectivity and sensitivity of the ionophore-based ISE. The major disadvantage of ISEs is the necessity of performing a calibration curve (varying the intercept in the linear calibration curve equation) each time before running experiments, which limits their application as one-time disposable sensors or for use in remote water sample analysis. To overcome these challenges, we designed a unique back contact made of 3,4-ethylenedioxythiophene (EDOT) and 4-(2,3-dihydrothieno[3,4-b][1,4]dioxin-2-yl-methoxy)-1-butanesulfonic acid, sodium salt (EDOT-S). The calibration-free ISEs showed near Nernstian responses of 57.2 ± 0.2 mV/log [K+] and 28.5 ± 0.3 mV/log [Ca2+], while maintaining their respective selectivity against major interfering ions. The detection limits for Ca2+ and K+ ISEs were 0.45 ± 0.01 and 1.68 ± 0.18 µM, respectively. The charging cycles of the PEDOT: PEDOT-S back contact allowed us to fix the background potential at a desired fixed intercept value across different ionophores (K+, Ca2+). This protocol was used to determine the K+ and Ca2+ contents in creek water samples. The activity and concentration of [Ca2+] and [K+] in a local creek was found to be 257 ± 7.3 and 28.1 ± 1.1 µM, respectively.

Cu(II)-Catalyzed C-N, C-O, C-Cl, C-S, and C-Se Bond Formation via C(sp2)-H Activation Using 7-Azaindole as an Intrinsic Directing Group.

A general protocol has been developed for the construction of carbon-heteroatom (C-N, C-Cl, C-O, C-S, and C-Se) bonds using the bench stable, earth-abundant, and environmentally benign copper catalyst. Only oxygen is sufficient to regenerate the copper catalyst. Control experiments suggested that the proto-demetalation step is reversible. Depending on the coupling partner, the reaction follows either disproportionation or radical pathways to complete the catalytic cycle. The synthetic utility of the developed protocol has been demonstrated via various functional group transformations.

Diastereoselective [3 + 2] Cycloaddition of Quinoxalin-2(1H)-ones with Donor-Acceptor Cyclopropanes: Efficient Synthesis of Tetrahydro pyrrolo[1,2-a]quinoxalin-4(5H)-ones.

A ytterbium triflate-catalyzed diastereoselective [3 + 2] cycloaddition of quinoxalinones with donor-acceptor cyclopropanes and cyclobutanes is described. A series of tetrahydropyrrolo-quinoxalinone derivatives were obtained in high yields (up to 96%) with excellent diastereoselectivities (up to 46:1). Other medicinally important heterocycles like benzoxazinone, isoquinoxalinone, and dibenzoxazepine derivatives were also suitable for the desired annulation reaction. The current method is applicable for the scale-up reaction. Further, the utility of this annulation reaction is demonstrated by the synthesis of densely functionalized proline derivatives.

Multifunctional dendritic molecular probe for selective detection of Cu2+ ions using potentiometric and fluorometric techniques.

We have designed and synthesized a multifunctional dendritic molecular probe that selectively detects Cu2+ ions via potentiometric and fluorometric techniques with low detection limits (3.5 µM in potentiometry, 15 nM in fluorometry). The selective and reversible binding of the molecule with the Cu2+ ion was used to make a solid-state microsensor (diameter of 25 µm) by incorporating the molecular probe into the carbon-based membrane as an ionophore for Cu(II). The Cu(II) microelectrode has a broad linear range of 10 µM to 1 mM with a near Nernstian slope of 30 mV/log [aCu2+] and detection limit of 3.5 µM. The Cu(II) microsensor has a fast response time (1.5 s), and it has a broad working pH range from 3.5 to 6.0. The incorporation of the hydrophobic dendritic moiety makes the ionophore less prone to leaching in an aqueous matrix for potentiometric measurement. The cinnamaldehyde component of the molecule helps detection of Cu2+ ions fluorometrically, as indicated by a change in fluorescence upon selective and reversible binding of the molecular probe to the Cu2+ ions. The strategic design of the molecular probe allows us to detect Cu2+ ions in drinking water by using this novel dendritic fluoroionophore and solid-state Cu2+ - ion-selective microelectrode.

Anodic Stripping Voltammetry on a Carbon-based Ion-Selective Electrode.

In this study, we demonstrated the unique capability of carbon-based ion-selective electrode (ISE) to perform highly sensitive square wave anodic stripping voltammetry, while maintaining all the properties of an ISE, in terms of sensitivity, detection limit, response time and selectivity. Square wave anodic stripping voltammetry involves deposition and dissolution steps of metal ions, which means adsorption and desorption of metal ions on the conductive ion-selective membrane without losing its ion-sensing property. To demonstrate this capability, we chose a Ca2+ ion-selective microelectrode (µISE) as a potentiometric method and Cu2+-stripping voltammetry as an amperometric method. The carbon-based ISE surface is capable of quantifying nanomolar to micromolar Cu2+ in both a standard acetate buffer and a complex water sample. The Ca2+-µISE also showed a Nernstian slope of 29 mV / log [Ca2+] and a detection limit of 1 µM within the linear range of 1 µM to 10 mM. It thus opens an opportunity to use the low detection limit of anodic stripping voltammetry and the high selectivity of ISE-based potentiometry.

Glucose Microsensor with Covalently Immobilized Glucose Oxidase for Probing Bacterial Glucose Uptake by Scanning Electrochemical Microscopy.

We have developed a new dual-tip glucose sensing scanning electrochemical microcopy (SECM) probe by covalently immobilizing the glucose oxidase (GOD) enzyme onto an ultramicro electrode (UME) to measure the local glucose consumption of Streptococcus mutans (S. mutans) biofilms. GOD was immobilized on a novel enzyme immobilization matrix of functionalized multiwalled carbon nanotubes (f-MWCNTs) and 1-butyl-4-methylpyridinium hexafluorophosphate (ionic liquid/IL) packed into the etched Pt UME. The highly selective GOD-based SECM tip showed a high current density of 94.44 (±18.55) µA·mM-1·cm-2 from 0.10 to 1.0 mM at 37 °C as a result of the synergetic effects of f-MWCNTs and ionic liquid. The detection limit of the new 25 µm diameter glucose sensor is 10.0 µM with a linear range up to 4.0 mM. The sensor was successfully used to quantify the rate of glucose consumption of S. mutans biofilms in the presence of sucrose. S. mutans catabolizes both glucose and sucrose, producing lactic acid, reducing the local pH, and causing dental caries. With sucrose, S. mutans produces exopolysaccharides to enhance bacterial adhesion on the tooth surface; subsequent lactic acid production reduces the local pH, resulting in dental caries. Because of the high selectivity of the sensor, we were able to quantify glucose consumption in the presence of sucrose. S. mutans preferentially consumed sucrose in a mixed diet of both sucrose and glucose. Furthermore, using this unique fast-response (∼2 s) glucose sensor, we were for the first time able to map the distribution of the glucose consumption profile in the local environment of S. mutans biofilm. These findings provide insight into how the fast-growing S. mutans creates nutrient-depleted regions that affect the survival and metabolic behavior of other bacterial species within oral biofilm.

Cu(II)-Mediated Cross-Dehydrogenative Coupling of Indolines with Sulfonamides, Carboxamides, and Amines.

A facile and efficient Cu-mediated protocol for the cross-dehydrogenative coupling of indoline with sulfonamides, carboxamides, and anilines is reported. The reaction takes place through Cu-mediated C7-H activation via a 6-membered metallacycle to afford the amide and amine derivatives in good yields with a wide range of functional group tolerance. The importance of the protocol has been demonstrated by synthesizing the antiproliferative agent, ER-67836.

Plasticity of the Pyruvate Node Modulates Hydrogen Peroxide Production and Acid Tolerance in Multiple Oral Streptococci.

Commensal Streptococcus sanguinis and Streptococcus gordonii are pioneer oral biofilm colonizers. Characteristic for both is the SpxB-dependent production of H2O2, which is crucial for inhibiting competing biofilm members, especially the cariogenic species Streptococcus mutans H2O2 production is strongly affected by environmental conditions, but few mechanisms are known. Dental plaque pH is one of the key parameters dictating dental plaque ecology and ultimately oral health status. Therefore, the objective of the current study was to characterize the effects of environmental pH on H2O2 production by S. sanguinis and S. gordoniiS. sanguinis H2O2 production was not found to be affected by moderate changes in environmental pH, whereas S. gordonii H2O2 production declined markedly in response to lower pH. Further investigation into the pyruvate node, the central metabolic switch modulating H2O2 or lactic acid production, revealed increased lactic acid levels for S. gordonii at pH 6. The bias for lactic acid production at pH 6 resulted in concomitant improvement in the survival of S. gordonii at low pH and seems to constitute part of the acid tolerance response of S. gordonii Differential responses to pH similarly affect other oral streptococcal species, suggesting that the observed results are part of a larger phenomenon linking environmental pH, central metabolism, and the capacity to produce antagonistic amounts of H2O2IMPORTANCE Oral biofilms are subject to frequent and dramatic changes in pH. S. sanguinis and S. gordonii can compete with caries- and periodontitis-associated pathogens by generating H2O2 Therefore, it is crucial to understand how S. sanguinis and S. gordonii adapt to low pH and maintain their competitiveness under acid stress. The present study provides evidence that certain oral bacteria respond to environmental pH changes by tuning their metabolic output in favor of lactic acid production, to increase their acid survival, while others maintain their H2O2 production at a constant level. The differential control of H2O2 production provides important insights into the role of environmental conditions for growth competition of the oral flora.

Pt-Decorated MWCNTs-Ionic Liquid Composite-Based Hydrogen Peroxide Sensor To Study Microbial Metabolism Using Scanning Electrochemical Microscopy.

Hydrogen peroxide (H2O2) is a highly relevant metabolite in many biological processes, including the oral microbiome. To study this metabolite, we developed a 25 µm diameter, highly sensitive, nonenzymatic H2O2 sensor with a detection limit of 250 nM and a broad linear range of 250 nM to 7 mM. The sensor used the synergistic activity of the catalytically active Pt nanoparticles on a high surface area multiwalled carbon nanotube and conducting ionic liquid matrix to achieve high sensitivity (2.4 ± 0.24 mA cm-2 mM-1) for H2O2 oxidation. The unique composite allowed us to miniaturize the sensor and couple it with a Pt electrode (25 µm diameter each) for use as a dual scanning electrochemical microscopy probe. We could detect 65 ± 10 µM H2O2 produced by Streptococcus gordonii (Sg) in a simulated biofilm at 50 µm above its surface in the presence of 1 mM glucose and artificial saliva solution (pH 7.2 at 37 °C). Because of its high stability and low detection limit, the sensor showed a promising chemical image of H2O2 produced by Sg biofilms. We were also able to detect 30 µM H2O2 at 50 µm above the biofilm in the presence of the H2O2-decomposing salivary lactoperoxidase and thiocyanate, which would not otherwise be possible using an existing H2O2 assay. Thus, this sensor can potentially find applications in the study of other important biological processes in a complex matrix where circumstances demand a low detection limit in a compact space.

Real-Time Metabolic Interactions between Two Bacterial Species Using a Carbon-Based pH Microsensor as a Scanning Electrochemical Microscopy Probe.

We have developed a carbon-based, fast-response potentiometric pH microsensor for use as a scanning electrochemical microscopy (SECM) chemical probe to quantitatively map the microbial metabolic exchange between two bacterial species, commensal Streptococcus gordonii and pathogenic Streptococcus mutans. The 25 µm diameter H+ ion-selective microelectrode or pH microprobe showed a Nernstian slope of 59 mV/pH and high selectivity against major ions such Na+, K+, Ca2+, and Mg2+. In addition, the unique conductive membrane composition aided us in performing an amperometric approach curve to position the probe and obtain a high-resolution pH map of the microenvironment produced by the lactate-producing S. mutans biofilm. The x-directional pH scan over S. mutans also showed the influence of the pH profile on the metabolic activity of another species, H2O2-producing S. gordonii. When these bacterial species were placed in close spatial proximity, we observed an initial increase in the local H2O2 concentration of approximately 12 ± 5 µM above S. gordonii, followed by a gradual decrease in H2O2 concentration (>30 min) to almost zero as lactate was produced, and a subsequent decrease in pH with a more pronounced metabolic output of S. mutans. These results were supported by gene expression and confocal fluorescence microscopic studies. Our findings illustrate that H2O2-producing S. gordonii is dominant while the buffering capacity of saliva is valid (∼pH 6.0) but is gradually taken over by S. mutans as the latter species slowly starts decreasing the local pH to 5.0 or less by producing lactic acid. Our observations demonstrate the unique capability of our SECM chemical probes for studying real-time metabolic interactions between two bacterial species, which would not otherwise be achievable in traditional assays.

Carbon-Based Solid-State Calcium Ion-Selective Microelectrode and Scanning Electrochemical Microscopy: A Quantitative Study of pH-Dependent Release of Calcium Ions from Bioactive Glass.

Solid-state ion-selective electrodes are used as scanning electrochemical microscope (SECM) probes because of their inherent fast response time and ease of miniaturization. In this study, we report the development of a solid-state, low-poly(vinyl chloride), carbon-based calcium ion-selective microelectrode (Ca(2+)-ISME), 25 µm in diameter, capable of performing an amperometric approach curve and serving as a potentiometric sensor. The Ca(2+)-ISME has a broad linear response range of 5 µM to 200 mM with a near Nernstian slope of 28 mV/log[a(Ca(2+))]. The calculated detection limit for Ca(2+)-ISME is 1 µM. The selectivity coefficients of this Ca(2+)-ISME are log K(Ca(2+),A) = -5.88, -5.54, and -6.31 for Mg(2+), Na(+), and K(+), respectively. We used this new type of Ca(2+)-ISME as an SECM probe to quantitatively map the chemical microenvironment produced by a model substrate, bioactive glass (BAG). In acidic conditions (pH 4.5), BAG was found to increase the calcium ion concentration from 0.7 mM ([Ca(2+)] in artificial saliva) to 1.4 mM at 20 µm above the surface. In addition, a solid-state dual SECM pH probe was used to correlate the release of calcium ions with the change in local pH. Three-dimensional pH and calcium ion distribution mapping were also obtained by using these solid-state probes. The quantitative mapping of pH and Ca(2+) above the BAG elucidates the effectiveness of BAG in neutralizing and releasing calcium ions in acidic conditions.

Real-time monitoring of calcification process by Sporosarcina pasteurii biofilm.

Sporosarcina pasteurii is known to produce calcite or biocement in the presence of urea and Ca(2+). Herein, we report the use of novel ultramicrosensors such as pH, Ca(2+), and redox sensors, along with a scanning electrochemical microscope (SECM), to monitor a real-time, bacteria-mediated urea hydrolysis process and subsequent changes in morphology due to CaCO3 precipitation. We report that the surface pH of a live biofilm changed rapidly from 7.4 to 9.2 within 2 min, whereas similar fast depletion (10 min) of Ca(2+) was observed from 85 mM to 10 mM in the presence of a high urea (10 g L(-1)) brine solution at 23 °C. Both the pH and the Ca(2+) concentration profiles were extended up to 600 µm from the biofilm surface, whereas the bulk chemical composition of the brine solution remained constant over the entire 4 h of SECM experiments. In addition, we observed a change in biofilm surface morphology and an increase in overall biofilm height of 50 µm after 4 h of precipitation. Electron microscopy confirmed the changes in surface morphology and formation of CaCO3 crystals. Development of the Ca(2+) profile took 10 min, whereas that of the pH profile took 2 min. This finding indicates that the initial urea hydrolysis process is fast and limited by urease or number of bacteria, whereas later CaCO3 formation and growth of crystals is a slow chemical process. The ultramicrosensors and approaches employed here are capable of accurately characterizing bioremediation on temporal and spatial scales pertinent to the microbial communities and the processes they mediate.

Inhibition of the MRP1-mediated transport of the menadione-glutathione conjugate (thiodione) in HeLa cells as studied by SECM.

Oxidative stress induced in live HeLa cells by menadione (2-methyl-1,4-napthaquinone) was studied in real time by scanning electrochemical microscopy (SECM). The hydrophobic molecule menadione diffuses through a living cell membrane where it is toxic to the cell. However, in the cell it is conjugated with glutathione to form thiodione. Thiodione is then recognized and transported across the cell membrane via the ATP-driven MRP1 pump. In the extracellular environment, thiodione was detected by the SECM tip at levels of 140, 70, and 35 µM upon exposure of the cells to menadione concentrations of 500, 250, and 125 µM, respectively. With the aid of finite element modeling, the kinetics of thiodione transport was determined to be 1.6 10(-7) m/s, about 10 times faster than menadione uptake. Selective inhibition of these MRP1 pumps inside live HeLa cells by MK571 produced a lower thiodione concentration of 50 µM in presence of 500 µM menadione and 50 µM MK571. A similar reduced (50% drop) thiodione efflux was observed in the presence of monoclonal antibody QCRL-4, a selective blocking agent of the MRP1 pumps. The reduced thiodione flux confirmed that thiodione was transported by MRP1, and that glutathione is an essential substrate for MRP1-mediated transport. This finding demonstrates the usefulness of SECM in quantitative studies of MRP1 inhibitors and suggests that monoclonal antibodies can be a useful tool in inhibiting the transport of these MDR pumps, and thereby aiding in overcoming multidrug resistance.

Discovery of a biofilm electrocline using real-time 3D metabolite analysis.

Bacteria are social organisms that possess multiple pathways for sensing and responding to small molecules produced by other microbes. Most bacteria in nature exist in sessile communities called biofilms, and the ability of biofilm bacteria to sense and respond to small molecule signals and cues produced by neighboring biofilm bacteria is particularly important. To understand microbial interactions between biofilms, it is necessary to perform rapid, real-time spatial quantification of small molecules in microenvironments immediately surrounding biofilms; however, such measurements have been elusive. In this study, scanning electrochemical microscopy was used to quantify small molecules surrounding a biofilm in 3D space. Measuring concentrations of the redox-active signaling molecule pyocyanin (PYO) produced by biofilms of the bacterium Pseudomonas aeruginosa revealed a high concentration of PYO that is actively maintained in the reduced state proximal to the biofilm. This gradient results in a reduced layer of PYO that we have termed the PYO "electrocline," a gradient of redox potential, which extends several hundred microns from the biofilm surface. We also demonstrate that the PYO electrocline is formed under electron acceptor-limiting conditions, and that growth conditions favoring formation of the PYO electrocline correlate to an increase in soluble iron. Additionally, we have taken a "reactive image" of a biofilm surface, demonstrating the rate of bacterial redox activity across a 2D surface. These studies establish methodology for spatially coordinated concentration and redox status measurements of microbe-produced small molecules and provide exciting insights into the roles these molecules play in microbial competition and nutrient acquisition.

Real-time mapping of a hydrogen peroxide concentration profile across a polymicrobial bacterial biofilm using scanning electrochemical microscopy.

Quantitative detection of hydrogen peroxide in solution above a Streptococcus gordonii (Sg) bacterial biofilm was studied in real time by scanning electrochemical microscopy (SECM). The concentration of hydrogen peroxide was determined to be 0.7 mM to 1.6 mM in the presence of 10 mM glucose over a period of 2 to 8 h. The hydrogen peroxide production measured was higher near the biofilm surface in comparison to Sg grown planktonically. Differential hydrogen peroxide production was observed both by fluorometric as well as by SECM measurements. The interaction between two different species in a bacterial biofilm of Sg and Aggregatibacter actinomycetemcomitans (Aa) in terms of hydrogen peroxide production was also studied by SECM. One-directional y-scan SECM measurements showed the unique spatial mapping of hydrogen peroxide concentration across a mixed species biofilm and revealed that hydrogen peroxide concentration varies greatly dependent upon local species composition.

Organocatalytic asymmetric Mannich cyclization of hydroxylactams with acetals: total syntheses of (-)-epilupinine, (-)-tashiromine, and (-)-trachelanthamidine.

An asymmetric, organocatalytic, one-pot Mannich cyclization between a hydroxylactam and acetal is described to provide fused, bicyclic alkaloids bearing a bridgehead N atom. Both aliphatic and aromatic substrates were used in this transformation to furnish chiral pyrrolizidinone, indolizidinone, and quinolizidinone derivatives in up to 89% yield and 97% ee. The total syntheses of (-)-epilupinine, (-)-tashiromine, and (-)-trachelanthamidine also achieved to demonstrate the generality of the process.

Counter ion effect in Au/Ag-catalyzed chemoselective 6-endo-dig N- and O-cyclizations of enyne-urea system: diversity-oriented synthesis of annulated indoles.

A two-step protocol for the diversity-oriented synthesis of annulated indoles following MCR-post MCR modification concept is described. The reaction initially proceeds through the annulation of 2-(2,2-dibromovinyl)aniline, an isocyanate, and a terminal alkyne in a three-component tandem format via Cu/Pd-catalyzed cross coupling to afford N-1 and C-2 functionalized indole. In the subsequent step, the enyne-urea derivative undergoes chemo- and regioselective 6-endo cyclization to afford O-cyclized product in the presence of Au(I)/AgNO3 and N-cyclized product in the presence of Au(I)/AgOTf under a post-MCR modification step. A mechanistic investigation following a recent pioneering work on the silver effect in gold catalysis (Shi, X. J. Am. Chem. Soc. 2012, 134, 9012) explains the role of counterion on Au/Ag-catalyzed regiodivergent pathways.